Connections problems with magic mouse

I keep losing the bluetooth connection with my Magic Mouse, magic track pad and apple bluetooth keyboard. 
Magic Mouse problems are daily.  Sometimes it works intermittently.  Track pad problems are less frequent.
The keyboard gives me problems with the shift key.  When I hit the shift key sometimes it causes texts to be highlighted on screen. When texts are highlighted on screen, they are erased once I hit a new key.  This is extremely frustration.  Any solutions? 

Usual first attempt for a remedy for these BT problems is to try smc and pram reset.

Similar Messages

  • Connection problems with Magic Mouse and handoff

    I did a clean install of 10.10.3 and since then the Magic Mouse has had problems connecting. First it wouldn't pair. After a few reboots and repeated attempts I was able to pair the mouse with the rMBP. After waking from sleep it now no longer connects. I select the mouse in the Bluetooth menu and connect. Connection appears on the screen, but the mouse doesn't respond. After a few moments I get Connection Lost on the screen.
    In addition to the mouse problems I have completely lost any hand off capability to or from the iPhone to the rMBP or back. It's like the Bluetooth connection between the devices is not working or is too weak to function.
    It would be very much appreciated if any one has any suggestions on the cause or to a solution.
    Thanks.

    Hey Tom,
    NVRAM and PRAM are, while technically different, effectively the same. Newer systems utilize NVRAM to store the same information that was stored in PRAM on older Macs.
    On older Mac computers, similar information was stored in Parameter RAM (PRAM). Resetting NVRAM on Intel-based Macs using the same key combination is like resetting PRAM.
    How to Reset NVRAM on your Mac
    https://support.apple.com/en-us/HT204063
    Cheers,
    Allen

  • Connection problem with Magic Mouse

    Hello
    I've just upgraded my iMac with Snow Leopard. My MM was working perfectly before but now, when I power on the mouse, the computer doesn't reconnect it.
    The "Favorite" option on bluetooth device is set to YES. The only solution is to connect another USB mouse and reconnect the MM manually.
    I attempted to delete the MM and reconnected it....no result.

    Hello
    It didn't solve my problem .
    I tried to delete my mouse in bluetooth prefs several times. When I detect it again, I don't need to execute the pairing process, the system recognize the mouse immediatly. Perhaps a "ghost" of my mouse in any configuration file persists!?
    Thank you

  • Safari update - problem with magic mouse

    Hi all, I recently installed safari update to 5.1 (6534.50) on a mabbook pro OS X 10.6.8. Ever since update, I've been experiencing the problem with safari reloading pages and kicking me out of websites that use flash player (back to log-in screen). I can deal with that by using another browser, however the update has really messed up my magic mouse. At first, every time I put my macbook to sleep or shut it off, the mouse would stop responding when I woke the mac up. I would have to disconnect the mouse and reconnect. But this was really eating up my batteries, so this morning I shut the mouse off when I put the mac to sleep. Now it won't connect at all. Anybody have any suggestions? Thanks in advance for your help!

    Thanks Carolyn and Barry,
    I did what Carolyn suggested - moving the .plist file into the trash. I have not resetting the PRAM or SMC yet.
    When I go to system preferences>Bluetooth, I get a screen that says:
    Bluetooth power is off. To use Bluetooth, first you must turn it on. (Note - my mouse is turned on)
    Both ON and DISCOVERABLE are checked.
    In the middle of the screen, it says No Devices (Set Up New Device...)
    When I select set up new device, it finds my device and attempts to pair but is unsuccessful.
    Resetting the SMC and PRAM scares me. After reading the links that Carolyn provided, I remembered another weird issue I had with my mac shortly before the update and mouse issue. For some reason, my clock suddenly became out of sync and I was on a 2000 date. I got an error message and reset the clock manually. Could this be the cause of my mouse issue? I feel like every step I've taken to get my mouse working again has made the problem just a little bigger!
    Thanks again for helping me!
    Judy

  • Problem with Magic Mouse pairing

    Hello Apple Support Communities
    I have used a Magic Mouse for some time, maybe now an year. But I started having this problem today.
    When the Magic Mouse did not connect with my MBP, I removed the mouse from the Bluetooth and tried to put it back.
    But the Bluetooth Setup Assistant is saying that the pairing did not work, and asked for a passcode or a different pairing method.
    Here's a screenshot:
    Also, I tried using the System Prefrences and click on mouse to set up my Magic Mouse, but it said the same thing; pairing failed.
    Here's a screenshot:
    Is there any solutions to this problem? I hope that you can get me an answer fast, as I use Magic Mouse a lot with my MBP.

    Not knowing what machine you have, it's age, and its current OS X and version doesn't help people help you.    Please could you fill in your profile.
    Do you have, or know someone who has a wired mouse?

  • Problems with Magic Mouse, OS 10.9.2 with Mac Mini (mid 2010)

    My mouse connects fine to the computer but I can´t use any magic movements at all. What can be the problem? I use Magic Mouse, OS 10.9.2 with Mac Mini (mid 2011).

    Troubleshooting wireless mouse and keyboard issues
    OS X: Bluetooth devices become unresponsive

  • Problems with Magic Mouse

    Hello, I have a magic mouse connected to my mac book pro.  The problem is this, everytime I left or right click I get a pop up menu.  I find this very annoying.  Any advice on how to fix would be appreciated.  Thanks a bunch.

    Sounds like you are seeing a contextual menu popup which is normally a right click.  First check you mouse preferences and make sure you didn't define right (secondary) click as being on the left.  If you didn't then perhaps you are pushing on the mouse too close to the left/right "border" between the two sides. Try moving your finger a little more to the left.

  • IMac 27" i5: Bluetooth Enabler Driver Problem with Magic Mouse and Keyboard

    So I just got my iMac 27" Quad Core i5 computer and was able to succesfully install Windows 7 64-bit (using this guide to get past the blank screen problem http://discussions.apple.com/thread.jspa?messageID=10533092). I then installed the Boot Camp 3 drivers from the Mac OS CD and updated windows via Windows Update. Everything seemed to work well.
    I even had right click and scrolling capabilities with the MAGIC MOUSE! Also, all the keys were functional on the wireless keyboard.
    However, after a few minutes of use the keyboard and mouse would hang and get stuck and I would have to do a hard reboot of the machine. I uninstalled the Apple Bluetooth drivers from the Add/Remove Programs menu and it fixed the problems with the devices getting stuck. However, function keys on the keyboard (brightness, volume, etc.) and scrolling in the Magic Mouse now not work. Is anyone else having this problem?

    I found a solution, and everything now works! I followed step three in this discussion http://discussions.apple.com/thread.jspa?threadID=2221427&tstart=0 which says:
    Disable power management for Bluetooth Radio. Open device manager, open Bluetooth Radios and right click on "Apple Bluetooth". Select the "Power Management". Uncheck "Allow the computer to turn off this device to save power".

  • AT300-100 - Connection problems with bluetooth mouse

    I am having problems connecting a bluetooth mouse to my toshiba AT300-100 tablet.
    The tablet and the mouse are able to successfully pair with each other. The tablet asks for the password, I enter 0000 and the two devices successfully pair up with each other.
    I then ensure that the mouse is selected as an input device (click on the mouse settings icon in the Bluetooth screen). I receive no errors at any point. However, there is no mouse pointer on the screen, the mouse buttons have no effect, and the scroll wheel has no effect.
    I have Googled and searched this forum, I can not find a reference to this problem elsewhere. Please advise. It appears to be an O/S bug as far as I can tell.
    Looking on youtube I see the Asus tablet works fine with a mouse and I am following the exact same procedure. I have used the mouse on my Toshiba tecra with no problems at all, so I know the mouse is working just fine.
    Has anyone else had this problem and is there a solution?
    Thank you.
    Mark

    Hi
    Did you solve this issue?
    Are you abele to use the BT mouse connected to AT300?
    In the description of AT300 its mentioned that you can use Virtual Mouse connected via BlueTooth or USB port.
    Check the settings in Language & Input Android area.
    There should be a point called Keyboard & Input Mouse
    If you have more than one installed input device, tap Configure input methods to open the screen where you can configure each input method.

  • Macbook pro 2012 bluetooth problem with magic mouse

    I have a MacBook Pro 2.6 GHz Intel Core i7 running Mac OS X 10.7.4
    It's two days old and Bluetooth has stopped working.. I use bluetooth for my apple magic mouse.
    I know it's the Bluetooth app and not the mouse as I changed the mouse batteries and double checked it with my old iMac.
    The Bluetooth app has become sluggish and unresponsive.
    I have restarted and logged out and in.
    Run permissions.
    Switched Bluetooth off and on.
    Scratched my beard.
    Any ideas or similar problems?

    Not sure which Bluetooth app you are referring to ... 
    Try deleting Bluetooth preferences ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type this exactly as you see it here:
    /LIbrary/Preferences
    Click Go
    Move the   com.apple.Bluetooth.plist   file from the Preferences folder to the Trash.
    Now open System Preferences > Bluetooth and try re "pairing" the mouse.

  • Problem with magic mouse gestures in safari

    iMac 27", mid 2011
    16 GB 1333Mhz
    Using OS X Yosemite, Safari, Magic Mouse
    one day no problem at all, the next day, without any new installations:
    Whenever I use the swipe gesture to go back to a previous page,
    It does not work and I cannot scroll on this page anymore.
    Shutting down Safari and restarting it works.
    I read a lot about this, it seems to be a known problem.
    I did not use terminal to use direct command for remedy, but tried everything else I read:
    power own the mouse, taking battery out, switching off BT for Mouse, several restarts of the iMac etc.
    Nothing helps.
    As I am so used to the gestures for a very long tome, it takes only seconds, before I swipe back-- and that´s it!
    I have to restart Safari.
    I would be very thankful for your help!
    best,
    Fred

    Hi seventy one,
    many thanks for your efforts to help me!!
    but I just solved my problem doing the exact same as someone else did:
    I cite him here:
    BidgeMar 10, 2015 7:05 PM Re: Magic Mouse Scrolling Issue
    Re: Magic Mouse Scrolling Issuein response to Linc Davis
    Hi Linc
    Thank you for the extremely detailed response.
    I think I have the issue solved for the minute at least.
    I not only disconnected every cable from the Mac, as I had previously done, I also disconnected every cable from my peripherals and powered down every peripheral as well, then re-wired my set-up. This seems to have solved the issue. Not sure of the technical reason that this would have fixed my problem, but it seems to have fixed the issue for the moment anyway.
    So, my problem is solved too!!
    Many thanks

  • Preference  problem with Magic Mouse

    I set my Magic Mouse scrolling preference to 'Fast' and it doesn't seem to stick, will revert to medium usually with a few hours.
    I guess i should try to delete a preference file, but which one?
    Can anyone help please?
    thanks

    this looks like the 1st time these forums will fail me
    someone must be able to help?

  • Problem with Magic Mouse

    I have just installed Lion onto my 27" iMac (3.2 GHz Intel Core i3) which i bought about six months ago.  I really love the new OS.  My only gripe is that when I scroll down with two fingers the screen goes up and visa versa.  I have looked in settings and cannot seem to find a solution... and yes the mouse is the right way up!  If anyone can help I would be very grateful.

    Just as a quick addition, I poped into my local Apple store today and they explained that the way the Trackpad and Magic Mouse were set up by apple was to feel like the iPad and iPhone, which now makes sense (scrolling up pushes the screen down and visa versa), so although it feels unatural it is the way it is supposed to work.  They advised trying it for few days wnd then see how I get on. Actually just knowing this makes it seem to work.

  • Problems with magic mouse and wireless keyboard at the same time

    I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and  i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
    What do you think about rarely issue?
    Thanks.

    Hello:
    Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
    Barry

  • Anyone else have a problem with Magic mouse scroll after Maverick update?

    Now I have upgraded to Maverick (among other minor things) my Magic Mouse scroll often doesnt work unless I close the application it stopped working in and open it again.
    Has anyone else had this issue? Is there a fix? was there any worthwhile reason to update?
    Jonny

    This has happened to me, in fact, why I'm even searching in here...I need help too to fix it! It's so annoying!

Maybe you are looking for

  • Return/exchange an ipad

    Hi guys, just bought new ipad 64Gb without cellular, cause they didn't have the one with cellular at the time. But I need  ipad with cellular, is it possible to return  it, get cash back and buy another one with cellular? Thank you.

  • Can't "save as"

    I'm using Photoshop CS2 on a Mac OS X 10.6.8. When I try to "save as" I get a message that says "could not save because of a disk error". I can "save" but not "save as". Suggestions?

  • Embedded SQL precompiler for C#?

    I know this is slightly off topic, but there is no better forum to ask this question. I'm looking for a C# precompiler that let's me embed SQL in my C# programs. It should have about the same feature set as SQLJ has for Java, e.g. - statical sql synt

  • Problems opening InDesign Files

    I can open one file but when I try to open a second file it never loads, it just sits there thinking. When I force close the program and reopen InDesign the two files open automatically and are ready to be worked on. FYI here is my set up Design Prem

  • How to control shuffle play order?

    Hi Everyone I have an Ipod shuffle I think its 4th gen. On the computer control panel I can delete songs  Import songs in the library.  I can check and uncheck.  I can rate songs, I can follow all the advise from users and help forums online.  I cant