Consistently size employee photos with PSE 9

I have PSE 9 and would like to use it to consistently size all employee photos for ID badges.  For example, after taking the employee’s picture, it would be uploaded/dragged into PSE and cropped appropriately, then saved at the ideal size.  Overtime, this would involve hundreds of photos so it’s important that all photos be consistently sized for importation to the ID badge application and to use with Outlook email active directory.  Years ago this was accomplished by creating a template in Photoshop, which I do not have. Can this be done with PSE and if so, can someone provide instructions. I’m new to this…  Thanks

Thank you.  I'm looking more at bringing in the raw image and crop accordingly.  I want each photo when all is said and done to be the same size.  For example, I take photos of a new employee today for ID badge purposes.  I import the raw image into PSE, crop, save as a jpeg, and upload into the ID badge program.  Tomorrow, I take another photo of a new hire employee and repeat the steps.  Next week we get new employees and repeat the process.  I would like to develop a process that would consistently make the cropped employee photos uniform each and every-time.  

Similar Messages

  • Get employee photos with sapnco 3.0

    Hi Experts,
    I am developing a program with vb .net that show employee photos worked our company.
    I use sapnco dll. Is there any BAPI to get employee photo with using pernr? Or which table store these photos?
    And can you give me an example about using bapi?
    Thank you in advance.

    These are the ones I configured:
            RfcConfigParameters parms = new RfcConfigParameters();
                    parms.Add(RfcConfigParameters.AppServerHost, "XYZ.HOST.COM"); // added
                    parms.Add(RfcConfigParameters.SystemNumber, "00");
                    parms.Add(RfcConfigParameters.SystemID, "XYZ");
                    parms.Add(RfcConfigParameters.User, "TESTUSER");
                    parms.Add(RfcConfigParameters.Password, "TESTPASSWORD");
                    parms.Add(RfcConfigParameters.Client, "100");
                    parms.Add(RfcConfigParameters.Language, "en");
                    parms.Add(RfcConfigParameters.PoolSize, "5");
                    parms.Add(RfcConfigParameters.MaxPoolSize, "10");
                    parms.Add(RfcConfigParameters.IdleTimeout, "600");
    Jim K.
    Edited by: Jim Killeen on May 10, 2011 7:33 PM
    Edited by: Jim Killeen on May 10, 2011 7:34 PM

  • Editing IPhOTO 11 PHOTOS with PSE 9 - problem

    I downloaded PSE 9 last night and have some problems.  I already went to Preferences in IPHOTO 11 and selected PSE 9 as my editor.  However, when I select a photo from IPHOTO to edit in an external editor, all I see is the First page of the PSE title page - the photo does not appear anywhere.  Any ideas how I can get past this glitch?  Thanks.

    You used the wrong file as the external editor. See this for more details:
    http://barbarabrundage.com/2010/11/29/using-photoshop-elements-9-with-iphoto/
    Basically you just need to go back and choose the file directly above the one you picked before.

  • Printing Passport photos with PSE 9.0 for Mac

    I just changed from Windows to Apple and thus changed Photo Shop Elements.  In the windows version i was apple to print a sheet of passport photos when I went to the print package, but that package does not appear to be there in the Mac version.  Any suggestions1
    TIM

    I do not see that at all.  Now I do have Photeshop CS5 on my computer to learn
    how to use it, but I also Photoshop 9 elements
    maybe that is the problem
    thanks for helping
    tim
    Tim Kavulla
    3607 Plum Hollow Drive
    Houston, TX 77059
    (H) 281-480-4715 (c) 832-444-2675
    [email protected]

  • IPhoto 08 with PSE 4.0

    I recently upgraded to Leopard and then also got iLife 08. I am a digital scrapbooker and use Photoshop Elements 4.0 in connection with iPhoto on my MacBook Pro. My question relates to iPhoto closing when I try to copy a picture into PSE . . . not sure why it closes and getting frustrated. Checked the Adobe site and found a PSE updater but can't install it . . . what's a girl to do?

    AnnaRobyn:
    Welcome to the Apple Discussions. How are you opening the photos with PSE?
    For what it's worth:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
    What version of PSE are you running and what happened when you tried to run the Adobe Photoshop Elements Updater application?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Batch uploading of employee photo using T-code OAAD

    Hi All,
    When uploading employee photos with OAAD, I can not use SHDB to record the bdc actions because there is a popup function(to specify uploading JPG file) which can NOT be recorded by BDC.
    So anybody got some suggestions?
    Thanks in adv.
    Br,Kee

    Hi,
    Use this code this will work.
    This is a code workaround instead of BDC from SHDB.
    START-OF-SELECTION.
      LOOP AT t_record.
    Since the employee photo is always stored in 0002 infotype, we need to
    concatenate the employee id with preceeding zeros and pad "0002" in
    right into the pernr field which will be passed to object_id
    Any unwanted leading zeros deleted
        SHIFT t_record-pernr LEFT DELETING LEADING '0'.
    Any leading space is removed
        CONDENSE t_record-pernr.
    0002 is concatenated to the emp id
        CONCATENATE t_record-pernr '0002' INTO t_record-pernr.
    Push the contents of pernr into pernr_zero since its a NUMC type field
    and hence zeros will be padded automatically by the system
        w_pernr_zero = t_record-pernr.
    Now pernr will be having zero padding
        CLEAR w_pernr_pass.
        w_pernr_pass = w_pernr_zero.
    Call this function module for storing the photos.
        CALL FUNCTION 'ARCHIV_CREATE_DIALOG_META'
          EXPORTING
            archiv_id  = 'A1'
            ar_object  = 'HRICOLFOTO'
            object_id  = w_pernr_pass
            sap_object = 'PREL'
            file       = t_record-path.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDLOOP.
    Hope this helps you.
    Regards,
    Subbu.

  • Mass uploading of employee photos.

    Hi Experts,
    I am uploading one  employee photo in ecc 6.0,Thats completed successfull.Now i am planning to upload bulk number of employee photos in to sap as well as in to ESS.I am tried to upload of 2000 employee photos through bdc ,but while running the BDC its asking the selection of employee photos from the location.So kindly update your views on this how to upload all employee photos with out manuall selection of photos.
    how can we update our photos in ESS once we completion of photos updation in sap.
    Thanks & Regards,
    arjun

    check this thread
    Mass upload of employee photos in OAOH

  • Trouble syncing photos with PSE7 (and the folder issue)

    Here's a brief history on what I've done up to now:
    I've had Photoshop Elements 7 installed for a while and I installed the PSE8 trial over top of it. I converted the catalog, and everything sync-wise was fine. After it exprired last night, however, I uninstalled it, and tried to revert back to PSE7. I added some photos to the catalog...
    And there's where my troubles started. When I went back into iTunes to sync with PSE, it showed all of the albums I have previously made in PSE8, even though I uninstalled it. I managed to track down where the PSE8 copy of the catalog from where it was hiding, and deleted it.
    Now, it doesn't even pick up any catalog anymore. Worse, when I sync my photos with PSE, it give me "iPod "" cannot be synced. The required folder cannot be found.". It does NOT give me this message when I sync with custom folders, but I strongly prefer to NOT do it that way and to do so with PSE7 instead.
    I've tried uninstalling and reinstalling iTunes, restarted computer, nothing helps.
    Does anyone know of a fix so that iTunes sees my catalog again? (Yes, I even deleted all instances of "iPod Photo Cache" from my computer too. Didn't help.)

    Nevermind, seems I posted this in the wrong place.

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • Problems with Uploading photos in PSE 7

    I've had nothing but problems with PSE 7. It is pretty slow and crashes once every half hour or so.  I tried loading 8 but after it crashed numerous times and wiped out some previous work I took it off. I bear with the poor functionality of PSE7 but now I can't upload any albums to PS.com.  I've uploaded over 16,000 pics and numerous albums before with no issues but now it's locked me out.  I've checked and done ALL the obvious things but I'm missing something. I have over 60G of space left so no space issues.  I know it must be something that I'm doing.  Is there as easy way to get help ... someone to speak to maybe as this is really frustrating. I want to work with this program but it is way too difficult for me ... and I've taking classes to help.
    Any thoughts or help would be greatly appreciated.  Dan D

    Mark ... Thank you so much for replying.  Interestingly enough 3 of the 4 albums that I was trying to upload ... went through last night.  That was almost 10 days after I created them and loaded the album onto my organizer. As for a few details ... here they are;
         ... each of the four albums were anywhere 30 to 57 photos @ about 4-6 MB each photo
         ... they were created around 10 days ago
         ... each time I created an album I made sure that I went through the process in its entirety as sometimes the organizer CUTS you off midstream (then the result is NO upload)
         ... when they didn't upload I tried reloading (a few times) them onto PS.com by recreating them.
         ... last night 3 of the albums went through and uploaded BUT ...
              ... album #1 was repeated twice
              ... album #2 was uploaded only once
              ... album #3 was repeated 3 times (once with a different name as I tried changing the name once to "solve my problem"
              ... album # 4 didn't upload
         ... I have an 100G account and have used about 24G of space
    I have just tried to upload the 4th album.
    I appreciate your help.  I am convinced that it is a server issue with PS.com as I've done this 31 times before.  If you have any thoughts whatsoever I'd appreciate them very much.
    My albums are at  ...   www.photoshop.com/user/dimaggio   The first 6 you see are the albums in question ... unless my forth album downloads.
    Thanks again,   Dan

  • Pse 7 cannot find all photos with a specific tag

    I keep my photos in a series of 'nested' subfolders by year and by topic and I have found that PSE7 will only find the first photo with a specific tag, for instance searching for one of our dogs by tag name will find the first time we saved a photo of her. It will not find her in the subsequent 7 years of folders/photos.  It is v irritating and I thought that I could do this search previously. Help please.  Thanks.

    Thanks, but this didn't work; PSE still finds the first photo with the specific search tag.

  • The Mystery of the Duplicating Photos with Varying resolutions and Sizes by Sony Z1 Compact

    about the duplicating photos with varying resolutions and Sizes problem... I have a band-aid fix to this without deleting everything in your  phone. What you do is to find time to actually MANUALLY DELETE the extra photos. Don't delete it by Taping on the Album app and deleting everything on the home photos.
    Instead tap the album then on the UPPER LEFT CORNER (If you've updated the albums) tap the 3 bars beside the album icon to access the album menu, then tap the FOLDERS choice.
    You should see alot of folders with Thumbnails named with numbers and different resolutions. Delete all the folders labeled as Thumbnails or cache. *note that you cannot delete whole folders but the folder gets deleted automatically after all the contents inside it is deleted
    Afterwards, go to your phone's settings->App-> Album
    Then tap the Clear Data button
    After that restart your phone.
    This actually "fixes" the problem for a while but usually after a few restarts or Phone charge the folders comeback and you have to redo the whole process again. But the folders that are made becomes fewer than the 1st occurrence of this problem and deleting the photos shouldn't take as long as the 1st.
    Honestly i think this is definitely an Application bug and should be fixed by Sony, since you know its their built in app for Multimedia

    yea that also helps since it's a bug caused by the new update. I'm just waiting for Sony to fix the bug, i don't really mind deleting the thumbnails

  • Syncing Photos with reduced size

    Initially when I sync photos between my computer and iTouch, there is an option of whether to keep the original size of those photos. After I switched to a different folder to sync photos with iTouch, I do not have that option from iTune. can someone help? How I can make that switch?
    Thanks,

    This isn't a direct answer, since I'm not running Photoshop Elements on a PC, but what you describe works perfectly with geotagged photos coming from iPhoto on my Mac. Photos taken in Texas and parts of Europe west of Greenwich show up fine; photos taken in Tunisia do also. I wonder if there's something funky about the EXIF information for the photos that don't show up? For whatever it's worth, here's the data from one of my Tunisia photos that DOES show up in Places on my iPad:
    -- GPS IFD -- :
    GPS tag version : 0,0,2,2
    North or South Latitude : N
    Latitude : 35°40'55.67"
    East or West Longitude : E
    Longitude : 10°6'11.74"
    Altitude reference : Sea level
    Altitude : 60.2m
    GPS time (atomic clock) : 7:10:10
    GPS date : 2009:04:17

  • Iphone app to take photos with reduced resolution or size

    is there an iphone app to take photos with reduced resolution or size(I mean when taking the photo, not modifying after)?

    Not that I know of,  that would be a iOS hack.

  • Employee Photos - Recommended Size and Resolution

    Hello All,
    Please can anyone advise on the recommended photo size and resolution to be used to provide the highest quality photo available on the infotype header ? Also, if there is a difference to use the photo format BMP or JPEG ?
    This information is required in order to ensure that there is a minium photo standard commuinicated before starting the implementation on SAP HR system.
    All information or experiences of photo size and/or resolution used will be much appreciated.
    Thanks in advance,

    Hi,
    This is not completely true regarding the format.
    You may use other formats as well : Employee Photo Restrictions
    Best regards,
    Guillaume

Maybe you are looking for