Console One Authentication (error -748) A Conn Timeout error

Above error occurs when authenticating to Console One for GW administration.
To be precise it occurs when the treename is used, it takes about 45 seconds, end then the error comes.
If IP address is input instead of treename there is immediate login and all is OK.
So I'm thinking SLP trouble - however all workstations can login and authenticate to the servers and eDir using the treename just fine.
SLD daemeon is running on the servers, and a slp request returns the expected novell bindery reply, and the slp.conf file is configured so that the 2 server setup points to the other server as a DA. Same DA's that work just fine from the workstation side.
Yes I can just put in IP and thats fine - however there must be a reason why C1 times out - any ideas ?

In article <[email protected]>, Bkelsen wrote:
> The treename is not in DNS however I thought of putting it there to fix
> the problem but this would be a workaround since it has worked fine
> before. My assumption was that C1 uses slp on the Linux box but i may be
> mistanken :)
>
Having the tree in your internal DNS is also a backup for part of SLP, in
case SLP has issues. What has worked well has been to have multiple eDir
root servers as A records for the tree.
I have never seen any evidence that C1 uses SLP for its login.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Similar Messages

  • HT4972 I keep getting an error when trying to update my ipad software to IOS5. The error is a Network timeout error when in fact my connection to the internet is stable and strong. Any suggestions?

    I've tried to update my ipad softward to the new IOS 5 software but keep getting internet connection errors.
    Initially, I thought it was related to my internet connection but I've tried with full connection and still getting the same error.
    Any suggestions would be a great help.
    PS - from South Africa

    Thanks King_Penguin - I've disabled both my firewall and antivirus software to no avail.
    Any other suggestions?
    Using Windows Vista - not sure if that make any difference???

  • Groupwise error in console one

    Netware server 6.5 sp6, GW 7.0.1 (no I haven't updated it yet with the HP)
    When trying to connect to the groupwise server with console one it asks me
    to select the domain. I point to the domain and click ok and I get an error
    The following GroupWise domain database file cannot be accessed properly.
    Z:\district\wpdomain.db.
    This is my domain database file and I wasn't going to it via a mapped drive
    but got this error. I then tried to fake it and made a mapped drive and
    tried to go that route. Same error.
    It just started happening yesterday on my PC. I updated my client to see if
    that was causing something, didn't fix it.
    The C1 version I am running is 1.3.6f
    This was working just the other day but decided I didn't need to access my
    domain database anymore.
    Ideas?
    Teresa

    Just like magic, it worked! Interesting...
    Thanks!
    Teresa
    "Joseph Marton" <[email protected]> wrote in message
    news:[email protected] m...
    > On Thu, 14 Jun 2007 17:13:52 +0000, Teresa wrote:
    >
    >> Netware server 6.5 sp6, GW 7.0.1 (no I haven't updated it yet with the
    >> HP)
    >> When trying to connect to the groupwise server with console one it asks
    >> me
    >> to select the domain. I point to the domain and click ok and I get an
    >> error The following GroupWise domain database file cannot be accessed
    >> properly. Z:\district\wpdomain.db.
    >
    > Try specifying the UNC path again, but this time throw in an extra slash
    > all along the way.
    >
    > \\\server\\vol\\dir
    >
    > --
    > Joe Marton
    > Novell Support Forum SysOp
    > Novell does not officially monitor these forums!
    >

  • Error Managing 98 OS through Console One

    After registering Windows 98 machines in Zenworks, workstations can be
    seen in Console One, but there is an error when trying to control
    printers or remoting into them. XP machines are working perfectly ok.
    Error1487: You are attempting to launch the operation from an obsolete
    or invalid workstation object. Verify that the workstation object is
    valid.

    Sherry,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Crystal report server2008 (XI R2): CMC session timeout error

    HI
    Crystal report server2008 (XI R2): CMC session timeout error
                Accessing folders, scheduling reporting or running reports are working fine with Central Management Console (CMC) within the Crystal report server or accessing CMC within VPN machine.  But when CMC is accessed through browser from client desktop i.e through proxy URL, users are not able to access folder or personal folders to view any reports even admin user is not able to access folders. When users try to access folder or personal folders it gives session-timeout errors. Within less than a 1 or 2 minutes it is showing session timeout error. Appreciates any one help on this quickly.
    Regards,
    Patrick Raths

    Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
    BTW., if thi is an important issue, I'd recommend creating a phone case.
    Ludek
    Edited by: Ludek Uher on Aug 11, 2010 1:58 PM

  • Recieving CORE7740 IO timeout error

    We have an issue were under load we are receiving connection errors attempting to connect to one of our middle tier servers. We are receiving a CORE7740 error - and I cannot find out any info on it. What exactly is this error? How do I increase the timeout for this? Any ideas for alleviating this? Any help would be welcome.
    Our configuration:
    Sun-Java-System-Web-Server/7.0 update 2
    Middle tiers: JBoss - 4.2.2.GA - http connector over tcp
    <Object name="reverse-proxy-/">
    ObjectType fn="http-client-config" timeout="3600"
    ObjectType fn="http-client-config" connect-timeout="3600"
    Route fn="set-origin-server" server="http://lpmid.examen.com:8080" server="http://lpmid1.examen.com:8080"
    </Object>
    From the error logs:
    [24/Jul/2008:07:17:27] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, attempting to connect to 10.10.15.21:8080
    [24/Jul/2008:07:21:11] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, error connecting to 10.10.15.21:8080 (IO time
    out error)
    [24/Jul/2008:07:21:11] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, service-http reports: CORE7740: unable to con
    tact lpmid1.examen.com:8080 (IO timeout error)
    [24/Jul/2008:07:21:11] info (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, set-origin-server reports: HTTP7751: server l
    pmid1.examen.com:8080 offline
    [24/Jul/2008:07:21:11] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, set-origin-server reports: received sticky re
    quest for server lpmid1.examen.com:8080
    [24/Jul/2008:07:17:27] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, attempting to connect to 10.10.15.21:8080
    G

    >
    If you were to disable failover but keep load balancing on, Web Server would return an error for any request destined for an offline origin server. (I think maybe you misunderstand how failover works; Web Server will only failover a request with a sticky session to another origin server if the sticky origin server is truly down. The fact that an earlier request failed will not prevent Web Server from trying to send a request with a sticky session to the correct origin server.)
    >
    We are definitely seeing subsequent calls to that server getting shunted over to other boxes after that TIME-OUT....
    [07/Aug/2008:05:17:22] fine (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, reusing existing persistent connection to lpmid:8080
    [07/Aug/2008:05:22:23] failure (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, service-http reports: HTTP7768: error reading response body (IO timeout error)
    [07/Aug/2008:05:22:23] info (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, set-origin-server reports: HTTP7751: server lpmid:8080 offline
    [07/Aug/2008:05:22:23] fine (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, set-origin-server reports: received sticky request for server lpmid.examen.com:8080
    [07/Aug/2008:05:22:23] warning (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, set-origin-server reports: HTTP7753: received sticky request for offline server lpmid:8080 (using server lpmid2:8080 instead)
    [07/Aug/2008:05:22:25] fine (18310) cl-production-ssl: for host yy.yy.yy.yy trying to GET /images/tab_documents_inactive.gif, set-origin-server reports: received sticky request for server lpmid:8080
    [07/Aug/2008:05:22:25] warning (18310) cl-production-ssl: for host yy.yy.yy.yy trying to GET /images/tab_documents_inactive.gif, set-origin-server reports: HTTP7753: received sticky request for offline server lpmid:8080 (using server lpmid2:8080 instead)
    [07/Aug/2008:05:22:40] fine (18310) cl-production-ssl: trying to OPTIONS http://lpmid:8080, check-http-server reports: received HTTP response code 200 from server lpmid:8080
    [07/Aug/2008:05:22:40] info (18310) cl-production-ssl: trying to OPTIONS http://lpmid:8080, check-http-server reports: HTTP7750: server lpmid:8080 onlineNotice that client yy.yy.yy.yy never got the timeout, they just tried to go to "lpmid" which had been marked "offline" by the webserver, so they got shunted to lpid2. They were an innocent victim of the timeout for xx.xx.xx.xx...right? At 5:22:40, the health check thread runs against lpmid and all is right with the world again.
    That is why we think that there are "innocent victims" of this TIME OUT issue.
    I used to have a bunch of <IF></IF><ELSE></ELSE> statements in my obj.conf files for some other things, but had to pull them out as the GUI would consistently scramble the lines up and cause major problems...so I am more than a little leary about using them again. (But that's a whole different subject.) :-)
    -JN

  • TimeOut error while running a report on the report server

    Hi,
    One of my report is taking 30 minutes to generate the output. It works fine when I run it locally, but when I run it on report server I encounter the following error message. Its a timeout error. Any solution other than tuning the query, please.
    500 Internal Server Error
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at java.lang.Class.newInstance0(Native Method)
         at java.lang.Class.newInstance(Class.java:237)
         at com.inprise.vbroker.orb.SE.read(SE.java:28)
         at com.inprise.vbroker.orb.DelegateImpl.handleReply(DelegateImpl.java:711)
         at com.inprise.vbroker.orb.DelegateImpl.invoke(DelegateImpl.java:606)
         at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:459)
         at oracle.reports.server._ConnectionStub.getMainFile(_ConnectionStub.java:1283)
         at oracle.reports.client.ReportRunner.getMainFile(ReportRunner.java:488)
         at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:121)
         at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:95)
         at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1322)
         at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1139)
         at oracle.reports.rwclient.RWClient.doPost(RWClient.java:328)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)

    Hi Bhasker
    Try setting idleTimeOut under connection element in server configuration file to a large value.
    Regards
    Sripathy

  • Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'

    Hello experts.
    When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
    Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
    We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
    This is what we've tried so far:
    replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64)  with the new version mentioned in Note 413708.
    tested the connection in SM59 - non successful
    tested the report query with transaction MDXTEST - non successful
    tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
    We have the following config:
    MS server 2003 SP2 x64 ed.
    SAP logon 7.20
    MS SQL server 2005
    CR 2008
    new librfc32.dll version 7200.1.39.6461
    Any ideas on what to try next would be highly appreciated!
    Cheers, IngA

    Hi Ingo.
    We have only one application server.
    I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
    Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
    --IngA
    Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM

  • Error: ORA-16778: redo transport error for one or more databases

    Hi all
    I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
    Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
    but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
    Please help me how can i resolve this issue .Thanks in advance.
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect sys
    Password:
    Connected.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database
    show database
    ^
    Syntax error before or at "end-of-line"
    DGMGRL> remove configuration
    Warning: ORA-16620: one or more databases could not be contacted for a delete operation
    Removed configuration
    DGMGRL> exit
    [oracle@PRIM ~]$ connect sys/sys@prim as sysdba
    bash: connect: command not found
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 08-OCT-2006 19:52:48
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PRIM_DGMGRLL" has 1 instance(s).
    Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect /
    Connected.
    DGMGRL> create configuration test as
    primary database is PRIM
    connect identifier is PRIM
    ;Configuration "test" created with primary database "prim"
    DGMGRL> add database STAN as
    connect identifier is STAN
    maintained as physical;Database "stan" added
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: NO
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    DISABLED
    DGMGRL> enable configuration
    Enabled.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database verbose prim
    Database
    Name: prim
    Role: PRIMARY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    PRIM
    Properties:
    InitialConnectIdentifier = 'prim'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'PRIM'
    SidName = 'PRIM'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "prim":
    Error: ORA-16778: redo transport error for one or more databases
    DGMGRL> show database verbose stan
    Database
    Name: stan
    Role: PHYSICAL STANDBY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    STAN
    Properties:
    InitialConnectIdentifier = 'stan'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'STAND'
    SidName = 'STAN'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    DGMGRL>

    This:
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    says that your network setup is not correct. You need to resolve that first.
    As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
    It's 3 DGMGRL commands so I am not sure what 'steps' you need?
    Larry

  • Open socket timeout error

    Sometime I can write to the local shared variable through data socket. But sometime cannot. Even though, I still can read/write through shared variable monitor.
    The error is in the open socket, said connect to peer timeout. I set timeout to 10s or left blank both not work.
    I am using 8.2.1 on vista. The computer has 2 lan ports.
    I met almost same case long time ago. I solved it by diable NETBIOS and one of the lan port.
    This time, I disabled netbios already. But in vista, seems not able to disable the other lan port.
    Any suggestion?

    hi turbot,
    I had same problem of timeout error.just check if system Firewall is on or off if it is on then make it off and then run the program.i don't know how much this will help you,it helped me.
    GAK
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

  • Getting timeout error while executing my report

    Hi experts,
    I need to get data from a Ztable which is having more than 64 millions of records. That query itself is taking more than 20 min to execute. I have used package size while retrieving tha data but still taking same time to execute, Giving me the TIMEOUT error .
    Provide some suggetions to use different types of SELECT quries that can be used to improve the performance.
    Thanks & Regards,
    Bhanu

    Hi ,
    I am working as an abaper for Service Management module.
    I need to show the prmise details inthe output of alv. Before that i need to get the meter reading details and need to do some calculations, by which i need to show idle one (Here only i need to hit a ZTABLE which is having more than 64 million records). For that idle premise user can select multiple pemises by using check boxes and can create notification by pressing a pushbutton 'CREATE IS NOTIFICATION' which exist on the application toolbar . So i can not run this report in background.
    Thanks & regards,
    Bhanu.

  • Timeout error in ECC "INTERNAL.CLIENT_RECEIVE_FAILED Error while receiving by HTTP (error code: 402 , error text: ICM_HTTP_TIMEOUT)"

    Dear Experts,
    I am very critical situation due to this timeout error in ECC, please help me as much as you can. Go-live date is very near, but I am not getting any clue why this error is occurring. our ECC system is EHP 4, and PI is dual stack 7.4
    My scenario is synchronous ABAP proxy to HTTP_AAE. request is triggering from ECC via proxy and reaching to third party (bank) through PI, I am reviving the response back in PI from bank. But from PI to ECC the response is not reaching. So in ECC after the defined Timeout limit its getting timed out.
    I have tried everything by increasing the timeout in ECC more than 15 minutes in HTTP_TIMEOUT under SXMB_adm in ECC, but nothing worked, even if I am increasing for half an hour then also its getting timeout after half an hour.
    response from bank to PI is coming within 30 to 40 seconds, but PI is not sending the response back to ECC.
    This is classical scenario, and I have checked the trace via SXMB_Moni in PI as well as in ECC, in ECC its showing the timeout error, but in PI i did not see any trace for this error.
    I have read many thread on SCN for the same error, and everywhere it has been suggested to increase the timeout, and I have tired that, it didn't help me.
    All ABAP proxy configuration has been done as follows.
    RFC destinations in ECC
    LCRSAPRFC(TCP/IP)
    SAPSLDAPI ((TCP/IP))
    G type destination to path "/sap/xi/engine?type=entry"
    G type destination SAP_PROXY_ESR to path "/rep"
    All the destination connection test is working fine.
    but i have a doubt on G type destination(AAE_XDJ) to path  "/sap/xi/engine?type=entry" which is returns the status code 500 with message "Empty HTTP request received", is it ok with 500 ?
    Configuration in ECC Integration Engine configuration is as follows
    Questions
    How the message gets pushed to ECC from PI, once the message received in PI, I believe by G type RFC destination on path  "/sap/xi/engine?type=entry" , please clarify.
    How to trace this, if message is not getting pushed to ECC, I mean I have checked the trace in PI XSMB_MONI, but didn't get anything for this error. In ECC SXMB_moni only I am able to the timeout error.
    Please expert help me as soon as you can, this error really effecting me badly in front of management
    Thanks,
    Farhan

    Hi Hareesh,
    I configured the scenario based on ICO, and again I received the same timeout error in ECC.
    I am really sick with this error, and I have raised the OSS message to SAP. Meanwhile I just want to double check my entire configuration with you. Please see the below configuration (for classical) for ABAP proxy to HTTP_AAE, and let me know if anything is wrong.
    Request structure (ECC->PI->Bank)
    <?xml version='1.0' ?>
    <PaymentInfoMessage>
    <PaymentInfoRequest>
    <CompanyCode>Partner01</CompanyCode>
    <BankCode>BSFRSARI</BankCode>
    <StartDate>2006-07-09T00:00:00</StartDate>
    <EndDate>2006-07-09T00:00:00</EndDate>
    <TransactionType>940</TransactionType>
    </PaymentInfoRequest>
    </PaymentInfoMessage>
    Response Structure (Bank->PI->ECC)
    <?xml version="1.0"?>
    <PaymentInfoMessageResponse>
    <PaymentInfoResponse>
        <TransactionType>940</TransactionType>
        <SequenceNum>1</SequenceNum>
        <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
        <ProcessStatus>1</ProcessStatus>
        <Comment>No Comment</Comment>
        <TransactionData>:20:MT940-1007200601
    :25:3210000079901
    :28C:190/0001
    </TransactionData>
        <CompanyCode>PARTNER01</CompanyCode>
    </PaymentInfoResponse>
    <StatusCode>OK</StatusCode>
    <StatusDetail>OK</StatusDetail>
    <ResponseItemCount>2</ResponseItemCount>
    </PaymentInfoMessageResponse>
    ESR Configuration
    Please see the below screenshot for ESR config. I have created 4 data types, 4 message types, 2 Service interface (synchronous), 2 mapping and one operation mapping.
    I just want to clarify about selecting the Request and response message type in inbound and outbound service interface.
    <?xml version='1.0' ?>
    <PaymentInfoMessage>
    <PaymentInfoRequest>
    <CompanyCode>Partner01</CompanyCode>
    <BankCode>BSFRSARI</BankCode>
    <StartDate>2006-07-09T00:00:00</StartDate>
    <EndDate>2006-07-09T00:00:00</EndDate>
    <TransactionType>940</TransactionType>
    </PaymentInfoRequest>
    </PaymentInfoMessage>
    Response Structure (Bank->PI->ECC)
    <?xml version="1.0"?>
    <PaymentInfoMessageResponse>
    <PaymentInfoResponse>
        <TransactionType>940</TransactionType>
        <SequenceNum>1</SequenceNum>
        <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
        <ProcessStatus>1</ProcessStatus>
        <Comment>No Comment</Comment>
        <TransactionData>:20:MT940-1007200601
    :25:3210000079901
    :28C:190/0001
    </TransactionData>
        <CompanyCode>PARTNER01</CompanyCode>
    </PaymentInfoResponse>
    <StatusCode>OK</StatusCode>
    <StatusDetail>OK</StatusDetail>
    <ResponseItemCount>2</ResponseItemCount>
    </PaymentInfoMessageResponse>
    ESR Configuration
    I have simply created 2 data types for requests(ECC->PI->Bank) and did one to one mapping. Similarly for response(Bank->PI->ECC) 2 data types, one to one mapping for this as well.
    But I just want to clarify about selecting the Request and response message type in inbound and outbound service interface. please explain me this for synchronous interface.
    Please see the below structure from ESR and inbound and Outbound service and let me know if the selection of Request and response message types is correct or not.
    OutBound service interface
    Inbound service interface
    Thanks,
    Farhan

  • Timeout error while filling setup tables

    HI all
    I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
    Going through threads i have come to know that to solve this issue
    1.BASIS team have to increase backgroung processses or memory
    2.run it as a background job.
    When I went to Program->Executein the backgroundPrint background parameters window has popped up.
    What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
    Please let me know.
    Thanks,
    Harika.

    thanks for the reply.
    it was set to LOCL only.
    But i have 3 options in the dropdown  windowsprinter :Send to onenote2007
                                      Microsoft XPS document writer
                                      OUrprinteraddress
    WHich one to choose here?
    Edited by: harikag on Aug 10, 2011 8:47 AM

  • IRQ timeout error while executing the custom personality fpga in veristand

    Hi,
    I have gone through the below link and created a custom fpga code to write analog output and digital output through NI 9269 and NI 9472 card respectively.
    NI Veristand add on - fpga configuration editor.
    https://decibel.ni.com/content/docs/DOC-35499
    i was able to import the .fpgaconfig file in veristand system definition window.
    When i execute the code, i am getting IRQ timeout error. 
    Could any one help me how do i debug this error?
    i am interested to see how the veristand host code is executing it.
     

    Hi,
    Have you tried to simplify the FPGA code? If the issue is related to the VCE, you should post there :
    - https://decibel.ni.com/content/message/67188#67188
    The developers of this tool will answer you.
    Posting the error message or the FPGA code will also help us
    Regards,
    --Eric

  • I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hi,
    I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hello there hastibahreini,
    It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for