Consolidation blocked while security file is loaded

Hello,
we have just migrated from HFM 9.2.0.3 to 11.1.1.3 and have found a strange behaviour when we load security file.
It seems that a security load can not run at the same time as a consolidation task or dataload.
It was not the case in 9.2, security file loading had no impact on other tasks.
Did you encounter that behaviour on your side ? Is it something normal or are there any setting to bypass this ?

Actions that change the system, including security, rules, metadata, or list file loads, need to alter the cached information on all application servers. When this happens HFM has to log out all users, and therefore HFM will wait for currently running consolidations to complete before it can make such a system change. The only thing you can do is to let users know in advance that during a specific timeframe you will be updating the settings. Otherwise what you experience is normal.
--Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • Data source doesn't show porper data while flat file data loading

    Hi Experts,
    I am trying to load data from flat file for info object 0GL_ACCOUNT. I have created an application component and data source.
    My question is after loading text data in the corresponding data source, it shows only few characters of the actual data.
    For Ex. in my original data i have G/L account name "Comp Hardware Purchase" but after loading into the data source it shows only "Comp Hardwa".
    I want to show the whole name "Comp Hardware Purchase ".  I know there is some text length problem but i couldn't find it. What steps i need to follow?
    Please help.
    Full points will be given to the useful answers ****
    Thanks and Regards,
    Niranjan Chechani

    HI Niranjan,
    Go to your data source and check whether the field and infoobject are having the same lenght. If the infoobject lenght is less than your field lenght wihc is coming from Flat file then such issue occur.
    Search for your flatfile datasource and and doubel clik on the datasource and check the fileds tabs, there you will have the mapping or you can also check your Transfer or Update rules of  the target.
    Regards,
    Nanda.S

  • Security file Migration

    Hi all, I am working on EssBase 6.5 on Win NT. Now we are going to Migrate this server on the Unix Machine. I have to Migrate my cfg. Application, Databases etc. But little Confusion i have ie. What should i do with the Security file. Can we transfer this file as usual it is on the NT. Or we should dump this file and then recreate all the Users. But This wouldn't be easy to do. Suggest me how we can Migrate my applications on th Unix from NT. Thanks in Advance..........

    Vishal,<BR>Stop essbase service<BR>dump security file<BR>load the dump in database using dts , informatica etc<BR>use sql to generate maxl commands (eg create user etc) using the data dump use default passwords for all users.<BR>copy results into maxl file<BR>run maxl file<BR>test using any login.<BR>ask users to chnage their passswords<BR><BR><BR>you should be ok<BR><BR>Sanjay

  • HFM Security file load error

    Hi All
    I am facing an error while loading the security file in Hyperion Financial Management which reads as:
    The specified item already exists.
    Show Details:
    Error Reference Number: {8D871273-18BC-4103-BF90-8196E3BFAFFC}
    Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityAccess.cpp;Line: 2856;Ver: 9.2.0.0.1380;
    Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityLoadACM.cpp;Line: 2034;Ver: 9.2.0.0.1380;
    Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityLoadACM.cpp;Line: 377;Ver: 9.2.0.0.1380;
    Num: 0x8004021f;Type: 0;DTime: 5/26/2009 12:56:09 AM;Svr: BHIHYPDVH24;File: CHsvSecurityLoadACV.cpp;Line: 209;Ver: 9.2.0.0.1380;
    Has anyone seen this error before? Please let me know the resolution or the cause atleast.
    Thanks in advance
    Rahul

    Hi Thanos,
    Thanks for the reply!!
    Yes, I tried extracting some ownership data for the years 2013 and 2012 and I was successful in loading the data back.
    I extracted the 2013 ownership data updated the year to 2014 and month to Jan and try to load it back then I am getting these errors.. same with for year 2015 and future years..
    The format of the load file looks correct as I was able to load for previous years with the updated ownership data with no errors..
    I killed the HFM process on the app server and tried to load it back but still could not succeed.
    Any suggestions.. please help...
    Thanks again!!

  • Error when loading security file .sec

    Hi
    I am getting error when tried to load security file
    Below  is extract of security file
    !FILE_FORMAT=2.0
    !VERSION=11.12
    !USERS_AND_GROUPS
    Praveen@Native Directory
    admin@Native Directory
    !SECURITY_CLASSES
    [Default]
    123
    !ROLE_ACCESS
    Provisioning Manager;Praveen@Native Directory
    Journals Administrator;Praveen@Native Directory
    Advanced User;Praveen@Native Directory
    Data Form Write Back from Excel;Praveen@Native Directory
    Inter-Company Transaction Admin;Praveen@Native Directory
    Provisioning Manager;admin@Native Directory
    Application Administrator;admin@Native Directory
    !SECURITY_CLASS_ACCESS
    123;Praveen@Native Directory;All;N
    i want to add a user and wan to give provision in the above security  file .sec (without doing it in Sharedservices )
    for the above security file i have added balaji and loaded it to HFM its not working.
    !FILE_FORMAT=2.0
    !VERSION=11.12
    !USERS_AND_GROUPS
    Praveen@Native Directory
    balaji@Native Directory
    admin@Native Directory
    !SECURITY_CLASSES
    [Default]
    123
    !ROLE_ACCESS
    Provisioning Manager;Praveen@Native Directory
    Journals Administrator;Praveen@Native Directory
    Advanced User;Praveen@Native Directory
    Data Form Write Back from Excel;Praveen@Native Directory
    Inter-Company Transaction Admin;Praveen@Native Directory
    Provisioning Manager;balaji@Native Directory
    Journals Administrator;balaji@Native Directory
    Advanced User;balaji@Native Directory
    Data Form Write Back from Excel;balaji@Native Directory
    Inter-Company Transaction Admin;balaji@Native Directory
    Provisioning Manager;admin@Native Directory
    Application Administrator;admin@Native Directory
    !SECURITY_CLASS_ACCESS
    123;Praveen@Native Directory;All;N
    123;balaji@Native Directory;All;N
    Can we add users and give provision in security file without creating user in shared services  ?
    Thanks

    If you have your application built using MSAD, then you an load the file the way you built it above, however because you're using the NativeDirectory, you need to create the user in the Directory(HSS) first.  Once the user is created, you can then go through and use the .sec method to assign access/roles, but the actual user creation can't be done through a load file.
    One of the easiest reasons to understand why this can't be done is that when you load the .sec file, you're not setting up a password for the user.

  • How can I get a loading animation to play while fly playback component loads a file?

    Hi team,
    Two part question here..
    So I have a FLV playback component and a number of .flv files that it loads   ------>  using video1.source="film/whatever.flv";
    There is a slight delay while the file loads and so I would like to
    A) make this pause a bit longer (it would be so fast at the moment that any loading animation would be subliminal, but with nothing at all you get a second of blank which is not good either- so if I can get it to be a bit longer, like say 2 seconds..
    B) have an animation play while this happens..
    It does not need to show progress or anything, just like a spinning wheel or whatever.
    I have been playing around with bufferTime but not really getting anywhere..
    Can anyone help me out?
    Thanks
    sub

    Here is a test with one flv player (video1) and two buttons (butt and butt1)
    Ok so I have some code that kind of works using the countdown timer... but I obviosuly dont know why it works because if I change the seconds count down from 1 to 2 it only works once.
    I get "working"
             "working"  trace twice and it works
    After that I get the "working" trace but nothing happens    ...    I am close but would really like to understand a bit more what I am doing!
    Any help greatly appreciated.
    Cheers
    Sub
    import flash.events.MouseEvent;
    var fl_SecondsToCountDown:Number = 1;
    var fl_CountDownTimerInstance:Timer = new Timer(1000, fl_SecondsToCountDown);
    video1.visible=false;
    video1.load("film/film1.flv");
    video1.stop();
    butt.addEventListener(MouseEvent.CLICK, go);
    function go(e:MouseEvent){
              video1.visible=false;
              fl_SecondsToCountDown = 1;
    fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
    fl_CountDownTimerInstance.start();
        video1.load("film/film1.flv");
    butt1.addEventListener(MouseEvent.CLICK, go1);
    function go1(e:MouseEvent){
              video1.visible=false;
              fl_SecondsToCountDown = 1;
    fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
    fl_CountDownTimerInstance.start();
              video1.load("film/film2.flv");
    function fl_CountDownTimerHandler(event:TimerEvent):void
    {trace("working");
              fl_SecondsToCountDown--;
              if(fl_SecondsToCountDown==0){
                        trace("done");
                        playmovie();
                        fl_CountDownTimerInstance.removeEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
    function playmovie(){
              video1.visible=true;
              video1.play();

  • HFM APP error when loading security file

    <p><font size="2" color="black">Good Day,</font></p><p> </p><p><font size="2" color="black">I am getting this error whenloading security file in HFM APP.</font></p><p> </p><p><font size="2" color="black">User not found with identity=native://DN=cn=0a3b0f123e6a9b46:1f9eca5f:10f110fd853:-7d24,ou=People,dc=css,dc=hyperion,dc=com?USER</font></p><p> </p><p><font size="2" color="black">File: Version: 9.2.0.0.1077 Line:-1 Error: (-2147216700)(0x800412C4)(User not found with identity =native://DN=cn=0a3b0f123e6a9b46:1f9eca5f:10f110fd853:-7d24,ou=People,dc=css,dc=hyperion,dc=com?USER)File: CHsxDSSecurity.cpp Version: 9.2.0.0.1077 Line: 6859 Error:(-2147216700)(0x800412C4)() File: CHsxSecurity.cpp Version:9.2.0.0.1077 Line: 2307 Error: (-2147216700)(0x800412C4)() File:CHsvSecurityAccess.cpp Version: 9.2.0.0.1077 Line: 3980 Error:(-2147216700)(0x800412C4)() File: CHsvSecurityLoadACM.cpp Version:9.2.0.0.1077 Line: 2864 Error: (-2147216700)(0x800412C4)() File:CHsvSecurityLoadACM.cpp Version: 9.2.0.0.1077 Line: 535 Error:(-2147216700)(0x800412C4)()</font></p><p> </p><p><font size="2" color="black">Anyone seen this before.</font></p><p> </p><p><font size="2" color="black">Thanks</font></p><p> </p><p><font size="2" color="black">Azmat Bhatti</font></p>

    If you have your application built using MSAD, then you an load the file the way you built it above, however because you're using the NativeDirectory, you need to create the user in the Directory(HSS) first.  Once the user is created, you can then go through and use the .sec method to assign access/roles, but the actual user creation can't be done through a load file.
    One of the easiest reasons to understand why this can't be done is that when you load the .sec file, you're not setting up a password for the user.

  • I downloaded Firefox but can't open it. I keep getting "The connection to the server was reset while the page was loading" message. If it's a firewall issue, how do I change my firewall to accept Firefox?

    I have used Firefox for a number of years but some time ago I got a virus on my computer. I loaded eset nod32, removed the virus and cleaned the old files etc. using ccleaner.com. Now I keep getting the "The connection to the server was reset while the page was loading" message and I haven't been able to use firefox since then. I have uninstalled and re-installed it several times with no avail. I suspect there is something in my windows frrewall stopping it.

    If you want to check the Firewall, follow this-
    1. Click Start Menu > Control Panel > Security Center.
    2. Under the "Manage security settings for" click Windows Firewall.
    3. On the Exceptions tab, do one of the following-
    1. If Mozilla Firefox Firefox is there in the list, make sure it's checked.
    2. If Mozilla Firefox is not there, close the Windows Firewall window.

  • "An error occurred while extracting files from the package "BaseSystem.pkg".

    Hello!
    I have a
    MacBookPro5,5
    Prozessortyp:Intel Core 2 Duo
    Prozessorgeschwindigkeit:2.26 GHz
    Anzahl der Prozessoren:1
    Gesamtzahl der Kerne:2
    L2-Cache:3 MB
    Speicher:2 GB
    Busgeschwindigkeit:1.07 GHz
    Boot-ROM-Version:MBP55.00AC.B03
    SMC-Version (System):1.47f2
    Hardware-UUID:A2DD27C4-9829-5A4D-854B-485EF8A6B20F
    Problem:
    I upgraded Leopard to Snow Leopard. Everything worked fine for a month. To free up disk space I deleted some of the iPhoto flders (modfied and original images). Everything worked still fine. Shut down the computer. Next day it was incredibly slow. At the same time the indexing was running. I stopped indexing, but stll slow. Every operation took minutes. I tried all the tricks that I found in the internet (repaired file permissions, repaired disk, cleared PRAM , moved big filed from desktop, etc.). After 24 full hours of trying all this I decided to erase the hard drive and reinstall, directly from the Snow Leopard Install disk, but it fails after downloading the packages. Below is the part of the log. Then I tried to use the old Leopard install DVD to reinstall Leopard, it then sais estimated time 12 hours or so and eventually crashed, spitting out a lot of "reportcrash" in the log. What is going on? I'm running out of options. Any advice? Would zeroing the hard drive help? If nothing else I plan to buy a new hard drive, since the only explanation I have is that there is a problem with the hard driven although the disk utility says it is OK. I need a bigger one anyway. Any ideas? Thank you!
    Aug 16 05:17:31 localhost OSInstaller[139]: IFPKInstallElement (191 packages)
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: ----- Begin install -----
    Aug 16 05:17:35 localhost OSInstaller[139]: PackageKit: request=PKInstallRequest <191 packages, destination=/Volumes/Macintosh HD>
    Aug 16 05:17:36 localhost OSInstaller[139]: PackageKit: Extracting /Volumes/Macintosh HD/Mac OS X Install Data/BaseSystem.pkg (destination=/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root, uid=0)
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/DataPool.c:116 : Error: finished pool without filling it
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/commonUtils.c: 315: Error: fh_pread -1
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:236: Error: write failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:260: Error: futimes failed for /Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root//System/Library/Frameworks/OpenCL.framework/Versi ons/A/Resources/runtime.amdil.bc: Invalid argument
    Aug 16 05:31:59 localhost Unknown[80]: /SourceCache/AppleFSCompression/AppleFSCompression-24.0.1/Common/StreamCompress or.c:829: Error: returning errno 22 from FinishStreamCompressorQueue
    Aug 16 05:32:10 localhost OSInstaller[139]: PackageKit: Install Failed: PKG: extracting "com.apple.pkg.BaseSystem"\nError Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error") {\n    NSFilePath = "/Volumes/Macintosh HD/.OSInstallSandbox-tmp/Root";\n    NSLocalizedDescription = "An error occurred while extracting files from the package \U201cBaseSystem.pkg\U201d.";\n    NSURL = "BaseSystem.pkg -- file://localhost/Volumes/Macintosh%20HD/Mac%20OS%20X%20Install%20Data/index.pro duct";\n    NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\"";\n    PKInstallPackageIdentifier = "com.apple.pkg.BaseSystem";\n}
    Aug 16 05:32:10 localhost OSInstaller[139]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 UserInfo=0x12c8366a0 "An error occurred while extracting files from the package “BaseSystem.pkg”." Underlying Error=(Error Domain=BOMCopierFatalError Code=22 UserInfo=0x12e703300 "The operation couldn’t be completed. FinishStreamCompressorQueue error")
    Aug 16 05:32:11 localhost OSInstaller[139]: Install failed: Die Installation ist aufgrund eines Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller der Software.
    Aug 16 05:32:13 localhost OSInstaller[139]: Allowing machine sleep.
    Aug 16 05:32:15 localhost OSInstaller[139]: Memory statistics for 'Installation ist fehlgeschlagen' pane:
    Aug 16 05:32:15 localhost OSInstaller[139]: Physical Memory Allocation:   139 MB wired,   259 MB trapped,   397 MB active,     7 MB inactive,  1246 MB free,  1650 MB usable,  2048 MB total

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • Error message when loading "The connection to the server was reset while the page was loading" I have to hit "try again and then it connects.

    I get the following message when trying to connect to firefox:
    "The connection to the server was reset while the page was loading." I have to click on "try again" and then it connects.

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Windows 7 and updated firefox window do not load completely . the banner may load or it times out. If I leave it sit for a while it may finish loading. New computer.. cannot figure it out.

    I have a new computer with windows 7. I downloaded the mozilla and the update.. now my pages do NOT load completely. the page banner but not the content. or it takes a really long time. When it will not load it say the try again.. and i reload a number of times to get it to load... HELP ME!!
    I will include an example below... in the URL blank.
    This includes Yahoo and Google...
    occasionally it says ...
    The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Data loss in the secure file transfer using java

    Hi,
    My java Appllication uses the sftp(secure file transfer protocol) for file transferring. when the load is high like 150 GB , data loss occuring for some files especially last chunk of data is missing.
    Core file transfer code
    while (true)
    int read = bis.read(buffer); //Reading bytes into the byte array (buffer) from network stream (bis).
    if (read==-1) {
    break; //Break the loop, if there are no more bytes available in the InputStream.
    bos.write(buffer,0,read); //Writing the same number of bytes what we read into buffer byte array into OutputStream
    complete.update(buffer,0,read); //Giving the same number of bytes what we read above to the checksum calculation.
    bytesSoFar += read; //Incrementing the bytes that we have read from the source.
    //if the bytes transferred are equal to the source file size
    If (bytesSoFar == fileInfo.getFileSize().intValue())
    // Calculate the file checksum.
    // Update DbAuditLog with checksum and no. of bytes read
    else
    // Update DbAuditLog with no. of bytes read
    bos.flush();
    Please help , why the data loss is happening when the big size files transfer
    Note:
    1.150 gb not a single file multiple files.
    2.SFTP no java specific API, So connection is happening through java .io.sockect connection

    so, if you are not getting any exceptions, yet the data is incorrect, it sounds like you are having actual network issues. i'd start looking at things like the actual network cards in the computer as well other equipment involved in the transfer. since you are not getting exceptions, the network stack obviously thinks nothing was lost over the wire, so either the actual hardware has issues, or the network stack, or the issue is on the sending end. the last possibility is that the client is somehow munging the data it is sending. do you control the client code? if so, i'd start checking the client side code for bugs (and/or post it here).
    also, i'm assuming that all of the variables included in your original code are thread local (you aren't sharing any of those buffers/streams/etc between multiple threads).

  • Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

    Hi this message appears after 2 hours downloading Mavericks in App Store :
    an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
    Same with "CMD + R"
    Help...

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • I have unistalled firefoc and downloaded it again. i cannot do any type of search. i usually get the answer The connection to the server was reset while the page was loading.

    whenever im trying to do any type of search on the web i get the answer "The connection to the server was reset while the page was loading.". I can uninstall mozilla and download it again from the web but can not search.

    Such a problem is nothing to do with Mozilla but can have many causes including
    * the site really is faulty - do other sites work ok ?
    * the browser internet settings are wrong, or an ISP problem <br/> - do other browsers (such as Internet Explorer) work ok ?
    * security software/ firewalls are blocking access - review their settings ?
    See
    * [[error loading web sites]] <-- clickable link ---
    You may also have other problems.
    *Update your Browser. <br> your browser version is showing as Firefox3.6.8 that is out of date and should be updated, preferably to the current version which is Firefox5 but next week will be Firefox 6.
    ** see [[updating firefox]]
    * Update other Software <br/>You should also review the plugins and add-ons they probably are not up to date
    ** there are options to do this from the firefox menu (or there are plans for this ) on newer versions. Use the link: http://www.mozilla.com/en-US/plugincheck/
    * Consider [safe mode]
    ** If you use safe mode do not make changes when you see the first dialogue Window with the list, just click on continue. Safe mode is sometimes useful for troubleshooting
    **If you have the ask toolbar installed there is a possibility it could cause problems, or at least possibility unexpected changes in searches.(Note safe mode does not disable plugins, you may need to do that manually). You may then need to refer to the following article if that or some other add-on causes problems.
    ** [[cannot uninstall an add-on]]

  • Security class requires java.security file???

    What is the use of java.security file? Which
    classes refer this file while creating the instance?
    Can we create a class file that will refer this security
    file?
    When the java program loads security class it needs java.security class?
    In what type situation security class look into java.security file???
    Pls help me
    regards,
    namanc

    Open the java.security file up in notepad or something.

Maybe you are looking for