Constant Activation Repair

I keep needing to re-activate my Audition 3. Every few days I will get an error stating my activation credentials are no longer valid. I called again today for the 4th time, since I just upgraded to 3.0 about a month ago, and I'm told by the support guy that this is a known problem with Windows Vista. Anyone else having this problem and heard the same thing from support? I'm begining to miss CE!!
Dell XPS 630i
Q6600 2.4 CPU
4GB RAM @1066
2-500GB Seagate Drives
Vista Ultimate SP1
Thanx,
Greg

Hi Greg,
I'm absolutely not aware of any existing issue that forces Vista users to continually re-activate Audition! I don't even see anything in the Knowledge Base about this issue. Can you describe the situation a bit more in-depth? Does it "reset" with each launch, or is it more random? What is the exact message you receive when it asks you to activate again?
Thanks,
Durin
Adobe Audition

Similar Messages

Wireless network has CONSTANT activity???

T61 dual boot, XP Pro (working fine) and Windows 7 Pro (working fine all but annoying wireless issue). All seems to be well...except for the small green wireless activity light CONSTANTLY flashing in my face. I can't see to figure out what the constant activity is all about. No updates downloading...drivers are all up-to-date.
Anyone have a suggestion?

This addresses the issue:
http://www.dicianno.org/blog/2008/09/30/your-wireless-network-has-been-compromis ed/

External Hard-Drive Constant Activity!

I have a WD 500gig external drive hooked up to my Macbook. Recently I have been having issues where the drive has constant activity (i.e. something is accessing it constantly and putting a load on it).
I have music, videos, photos etc.. so for example if I were to play a song in iTunes (my music is on the drive) iTunes slows right down because the drive is really slow.
I have tried closing all apps and seeing what happens, still light keeps flashing and something is accessing it. Then I opened Activity Monitor.. I did not see any abnormalities on what would be accessing the drive from there.
Then I thought there were errors on the drive.. so for the sake of I fired up DiskWarrior ran checks, fixes etc etc. Still after that something is still loading it right down!.
Any thoughts? The type of load on it is like it is being backed up.. or something is constantly sending info to it or receiving info from it.
There is no apps on the drive, just general data.
Any help is greatly appreciated.
Thanks,

If you don't want to index the drive then open Spotlight preferences, click on the Privacy tab, then drag the disk icon into the list. Spotlight will stop indexing the drive. However, you will not be able to do Spotlight searches on the drive unless the drive is indexed. If you're OK with that then no problem. Otherwise, you will have to wait for indexing to complete. Note that if you continue using the drive Spotlight will pause until the drive becomes available, but this will slow down the time it takes to complete indexing the drive.
If the drive is a USB drive then expect indexing to take much longer than for a Firewire drive. If you let the computer index the drive without you using the computer then indexing will go faster. Otherwise it will just take its own sweet time during which your computer and use of that drive will slow down.

New router = constant activity outgoing!

I've replaced a DOA Microsoft G router, Installed a new NetGear N300 last week that generated repeated DoS Attack:STORMs and also hung occasionally - returned it - and got a Linksys E2000 today.
Both the new routers were installed and exhibited something I had never seen before using the previous setup. CONSTANT outgoing activity.
I only know this because I am running Little Snitch (an internet/network monitor program for OSX). The activity is being generated by - mDNSResponder - and outgoing to - dns-cc-lb-01.rr.com - (I recognize the last bit as being part of Roadrunner Cable - my ISP provider.)
I've tried resetting everything, restarting everything only to have it continue. It's a bit disconcerting to see outgoing data and I would like to stop it if possible. Anyone know what this is exactly?
*A second issue*
The E2000 is a gigabit router, but when I connected it to my 10/100 wired home network - it didn't show up. Connecting directly, it works fine on Ethernet.
If I need to chuck it all and go for a new Airport Extreme to solve these issues - so be it. It's getting frustrating.
FWIW - the NetGear UI was quite good - the Linksys is poor.

This is part of OSX: I quote:
Mac OS X v10.6 uses the mDNSResponder process for unicast DNS (Domain Name System) functions, as well as Bonjour functions. Disabling the mDNSResponder process will also disable unicast DNS resolution, and without unicast DNS resolution, Mac OS X v10.6 cannot resolve hostnames such as www.apple.com.
The same article gives a method for disabling it:
http://support.apple.com/kb/HT3789
However it probably isn't actually transmitting very much information - many routers 'announce' their presence but it's only a few bytes, insignificant compared with normal traffic.
Open Activity Monitor in Application/Utilities and scroll down the list of process names to find mdnsresponder: you will see how much of your CPU it's using. Mine is currently showing 0%.

My Adobe Premiere Pro: Activation Repair Type Help

My software stopped working 12-16-2013, the dialogue box said that my computer was recently reconfigured. I have not re-configured my computer in the last 7 years. I am still using Windows XP and all my original programs. My activation type says Repair 93:21468669244, My computer is a stand-alone, not connected to the net, I just connect when I need to fix a driver. I was looking through some FAQs and most people said that Premiere Pro is not supported by a server anymore. I was not even connected the internet, how can my computer be affected or why did I recieve this problem. I intially purchased Adobe Primiere 6.0 in 2001 or 02 and upgraded to Adobe Premiere Pro in 2005, I also upgraded from Windows 2000 to XP in 2005. Everything was fine until yesterday. I just need someone from Adobe to contact me and help ASAP.
Esports

Also, if you have Premiere Pro CS4 or earlier, your question should be in http://forums.adobe.com/community/premiere/premierepro_previous?view=all

Computer on constant Automatic Repair and Diagnosing loop after Bios Update

I have an HP AiO 23 G010 computer that has decided to stop working after a Bios Update yesterday. It goes on a constant "Preparing Automatic Repair" and "Diagnosing Problem" loop followed by a blue screen that says "Your PC has run into a problem and we are gathering information..." with a face.
I have hit the esc button, f2, and everyother key that I can hit. It only allows me to go to the system screen where I am able to do tests, and checkout firmware management, etc. I tried to roll back the bios update but it would not allow me.
What can I do to fix this?
Thank you

Restore BIOS defaults and if you get into Windows, select a Restore Point prior to when you have problems.
If no go, you may have to perform a factory restore.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Westell 6100G Data light constant activity

I recived a new modem to replace my old 6100,my old one had 5 lights This new one (6100g) has 3 lights a internet ,data, and dsl light.Now I'm aware that when a light is flashing it means data is flowing through and or it's connecting.So why is it that the data light blinks non stop when the dsl and internet lights remain solid.I even detatched the ethernet cord and the data light was still blinking non stop is this normal? I can't imagine why it would be this active even when not in use.I can conncet to th internet but it seems alot slower than with my old modem.Also Im using a new pc with vista so im not sure if that has anyting to do with it.
Any thoughts?

#1 Be online.
#2 Check the IP Address, Subnet Mask, Default Gateway, and DNS Server(s) on your computer.
Since you are on Vista, see as need be
http://www.ncsu.edu/resnet/windows/ipconfig/vista.php
#3 Is the IP Address on your computer the same or different from the IP Address as shown at http://www.whatsmyip.org/ ?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Constant Activity between Airport Extreme and modem

Hello all,
I am the recent owner of an Airport Extreme. My Aiport Extreme is connected to my VDSL modem through the WAN port.
In the Options menu, I set the option "Status Light" to "Flash on Activity".
Doing so, I discovered that there is always activity between :
1) the Airport Extreme => I can see the green led flashing every 4-5 seconds
2) the VDSL modem => I can see the network led of the modem flashing every 4-5 seconds in sync with the Airport Extreme
Initially, I thought it was "real traffic" coming either from wireless devices or ethernet devices... But after unplugging the ethernet cables (for the devices connected via cables) and after disabling the Wifi network of the Airport Extreme, the leds of both Airport Extreme and the modem were still flashing in sync every 4-5 seconds... Then, I also unchecked the "Set time automatically", and still, both leds were still flashing in sync at the same interval !
I am a bit lost !
I am wondering what there is traffic/activity happening every 4-5 seconds when no device (either via Ethernet or wifi) is connected.
Do you also face the same issue ? Do you know the reason of the almost permanent activity between the Airport Extreme and my VDSL modem ?
Thank you very much for your replies !
Regards,
trabala38

Hello Bob Timmons,
Thanks for your insight in this.
Well, actually, to be logical, this traffic between the WAN port of the Airport Extreme and my modem could be coming from
1) garbage/requests on the VDSL line from my ISP
2) requests from the Airport Extreme to my modem
If it is number 2, do you think that the Airport Extreme could query the modem every 4-5 seconds, i.e. to check that the Internet connection is alive ?
Thanks for your feedback,
Regards,
trabala38

Sg 300-52 constant activity

we recently purchased a sg300-52. i was told i would need to setup a port trunk to connect it our main catalyst. However, i was able to connect a patch cable on the two devices and ping endpoint devices on both switches. I also noticed that the activity lights are constantly blinking. I'm not sure why. Is there something i can do to slow the activity light? it blicks constantly even in times of very low activity by the endpoint.

Hi Curtis,
Other traffic such as, broadcast traffic will be occurring within the vlan and it will be propagated on uplinks for devices within the same vlan.. You may be the uplink activity LED and maybe the PC activity LED flashing at the same time.
See the wireshark screen capture below taken from my PC. It shows about 7percent of the traffic was broadcast or multicast related traffic that will be broadcasted to all switch ports in the the same vlan. looking closely at this 10 second capture you will notice that 9.43 % of my traffic are plain old Layer 2 ARP packets. I am not concerned.
Broadcast and multicast traffic within a vlan is normal. Abnormal, is when there may be too much of that traffic (many thousands of packets a second ) maybe due to some sort of Denial of service attack or bad NIC card. If multicast video is floating around , you may see several thousand packets per second for each multicast video stream.
Should you worry, not unless there is a denial of service attach going on. Your symptoms however just indicate the activity LED is flashing, that sounds normal. If this LED is almost always or flashing with great repetitively, then it's worth a wireshark trace to see what might be happening.
regards Dave.
Grab wireshark, and get a feel for the rate of traffic that is hitting the switch. I would think that rate of broadcast traffic shoudl not be too great.

Constant activity on airport express

Any ideas why my Airport Express (and modem) are constantly showing activity?
I've set security and access control. Even tried switching channels from 11 to 6.
It's not that I'm seeing slow speeds, but who knows what I could be getting?
BTW, I'm on Comcast and using they're Motorola router.
Thanks.
P.S. Any reason I couldn't put a switch between the modem and the router?
PowerBook G4, 1.67 gHz, 1GB RAM Mac OS X (10.4.2)

wrong forum-sorry

Why does my 10.6.8 need constant permissions repair?

When I have a slowdown on my OS or hangs on an app, I typically run Disk Utility and repair permissions. I have found that there's always a lengthy repair required... no matter how recently I repaired permissions.
Today I did a repair, then tried one again immediately after. It still required a lengthy repair, on seemingly the same files (typically "System/Library/Frameworks/JavaVM.framework..." etc. and "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu"...)
Don't know why this happens...

Because the permissions on or structure of those files was intentionally modified after the repair permissions database was compiled. Ignore them. Repairing permissions repeatedly is a waste of time.
(63912)

Constant Permissions Repair

I have a 2009 Mac Pro that I have upgraded with an Intel 500 series SSD as the boot drive. This is a work machine, so it only has work related programs on the boot drive, and everything else is on NAS. I am having frequent problems with several programs failing to work properly, and when I repair permissions, it fixes a ton of files, and then everything works again. I also have an issue, where if you restart, it won't find the boot drive. You have to kill the power and then on startup it will work.
Any ideas on how to solve this?

Programs won't launch
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Constant Disk Repair on Snow Leopard

I've been with Mac's since OS 10.1 and I have never had to repair a disk until Snow Leopard came along. I got it the day it came out and I am constantly having to repair the disk. Is anyone else having the same problem?
P.S. And this is after doing a clean reinstall too.

I did a harware test a few weeks ago but Im about to do one again. Im keep Time Machine running so IM good if anything goes wrong. Apple actually had to replace my hard drive a few weeks ago because it was done but before that I was still getting the repair disk because of the "Invalid Directory Count." I have a Mac running Snow Leopard and I've only had to repair that disk once so I don't know whats going on with my Macbook Pro.

IPad mini constant activation follow by unknown device.

I have a problem and is getting my nerve. The problem here is whenever I was playing my iPad mini, suddenly shut me to lock mode, and I would have to key in my passcode and was brought to wifi page to choose the network to activate my iPad. It take a good 2 min to activate once it is done it appears unknown device in my screen. I encounter this for a few times a day. Please help me out.

Press & hold power button press menu button hold both down until you see Apple Logo and wait until ipad is reset you will
not lose any data.
BSydd Uk

Constant Activity seen in Console - How do I find/stop? Seems like Error

Here is a Sample of the Thousands of Entries for I don't know what..
11/25/07 9:22:00 AM com.apple.launchd[1] (0x10c740.cron[2362]) Could not setup Mach task special port 9: (os/kern) no access
11/25/07 9:23:00 AM com.apple.launchd[1] (0x10c740.cron[2374]) Could not setup Mach task special port 9: (os/kern) no access
11/25/07 9:24:00 AM com.apple.launchd[1] (0x10c740.cron[2386]) Could not setup Mach task special port 9: (os/kern) no access
11/25/07 9:25:00 AM com.apple.launchd[1] (0x10c740.cron[2400]) Could not setup Mach task special port 9: (os/kern) no access

Well I Clean installed again and DID NOT use the Migration assistant. I pulled over by hand what I knew I needed and left a Tome of old stuff behind. I did this as I had a Vanilla 10.5.1 on another drive and when I looked in console there were only 200 entries and nothing being written every minute. The install I was using that used the migration assist with had about 2500 entries every 2 days. Every minute It was doing the crone error. It was driving me nuts seeing the VM memory climbing to 2 megs. Now I have none of those issues!!! So whatever it was I did not pull over, Thank God. I kept checking console as I pulled things over and restarted and all held with no repeating errors in perpetuity. I had sent the issue to MacFixit and he suggested a clean install without migration. He could not figure out what it was either. I had felt this was what to do after seeing the other install (that had no migration) and when he confirmed it I bit the bullet and spent the day and now I have none of those repeating errors issues. Yikes this upgrade has been a BEAR But I Do Love Leopard! Very fresh once you start Fresh. I hoped this helps out some of you with the same issue.

Constant Activation Repair

Similar Messages

Maybe you are looking for