Constant value in one field in the Bex Report

Hi,
I want to have a field where the value of it constant irrespective of corresponding fields values.
Please suggest and let me know how to do it.
Regards,
Prem

Hi,
If you have any logic in your mind to populate that extra char or key figure , then you can make use of virtual char & virtual keyfigure .
Or if you want to just pass any constant value, then in CKF make a formula variable with user entry . What ever user enters in the selection screen that will start appearing in the report output against all the rows.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 12, 2011 8:55 AM

Similar Messages

Passing value to paramater field in the crystal report

Hai,
I have done the following thing.
1. Created SBO screen using screen painter.
2. Added one text box, button in the screen painter.
3. Created one Windows screen and attached Crystal report viewer.
4. As soon as the button clicked in the SBO screen i am able to open the crystal report.
But now i need values which i have typed in the text box should be passed to the crystal report. how this can be done . I have attached the code please let me know where is the error. I have also created paramater filed in the crystal report name "From_dt".
As soon as the screen opened from SBO. It is asking for discreate value. But i have already passed the value from the SBO. I need to pass the value dyanamical from SBO screen.
          Dim oRpt As New Myreport
                        Dim myTable As CrystalDecisions.CrystalReports.Engine.Table
                        Dim oLI As New CrystalDecisions.Shared.TableLogOnInfo
                        For Each myTable In oRpt.Database.Tables
                            oLI = myTable.LogOnInfo
                            oLI.ConnectionInfo.Password = "sapb1@sql"
                            oLI.ConnectionInfo.UserID = "sa"
                            myTable.ApplyLogOnInfo(oLI)
                        Next
                        Dim Crviewer As New Frm_rptwaste
                        Crviewer.CrystalReportViewer1.ReportSource = oRpt
                        Dim ParameterField1 As New CrystalDecisions.Shared.ParameterField
                        Dim ParamterFields As New CrystalDecisions.Shared.ParameterFields
                        Dim ParamterDescreteValue1 As New CrystalDecisions.Shared.ParameterDiscreteValue
                        ParameterField1.ParameterFieldName = "From_dt"
                        ParamterDescreteValue1.Value = txtcode.Value
                        ParameterField1.CurrentValues.Add(ParamterDescreteValue1)
                        ParamterFields.Add(ParameterField1)
                        Crviewer.CrystalReportViewer1.ParameterFieldInfo = ParamterFields
                        Crviewer.CrystalReportViewer1.RefreshReport()
                        Crviewer.ShowDialog()

Hi Suresh,
    Instead of Parameter, you try Formula field and assign desired value to formula.
HTH
B Ravi Shankar

XSLT List View Web part with Inline Editing changing value for one field changes the other lookup field

Hi
It's a bit of a weird one. In an XSLT List View web part when Inline editing is enabled if I change the date column, it changes the lookup field column as well. This behavior only occurs if the lookup list has more than 20 entries. Below 20 and we are
OK.
Let me explain by example:
MileStones List - Having more than 20 items
Tasks List - having a lookup to the Title field from MileStones list. Also having a due date field.
Simple web part page with one XSLT List View web part for Tasks having inline editing enabled.
When I edit the first record's due date and press enter (which saves the changes and moves onto next record) and change the due date on second record without even touching the MileStone field. Press enter to commit changes and you see the milestone changing
on first record!
The wierd thing is that if the MileStone list has less than 20 items all works as expected.
Any pointers will be appreciated
Thanks

Hi,
This is a known limitation when working with complex fields like Lookup field.
A workaround is that we can avoid using the inline edit feature when there are
complex fields in a list.
You can take a look at this KB from Microsoft Support to get more details:
http://support.microsoft.com/kb/2600186/en-us
A similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d369611-ee79-4b5c-86bb-c0f3878cd746/standard-list-view-with-inline-editing-lookup-column-copies-preceding-or-following-items-related?forum=sharepointgeneralprevious
Thanks
Patrick Liang
TechNet Community Support

How to find out the max/min value of one field corresponding to a second field in HANA through graphical way.

Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
Jyothirmayi

Hi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi

How does APEX check for null values in Text Fields on the forms?

Hello all,
How does APEX check for null values in Text Fields on the forms? This might sound trivial but I have a problem with a PL/SQL Validation that I have written.
I have one select list (P108_CLUSTER_ID) and one Text field (P108_PRIVATE_IP). I made P108_CLUSTER_ID to return null value when nothing is selected and assumed P108_PRIVATE_IP to return null value too when nothign is entered in the text field.
All that I need is to validate if P108_PRIVATE_IP is entered when a P108_CLUSTER_ID is selected. i.e it is mandatory to enter Private IP when a cluster is seelcted and following is my Pl/SQL code
Declare
v_valid boolean;
Begin
IF :P108_CLUSTER_ID is NULL and :P108_PRIVATE_IP is NULL THEN
v_valid := TRUE;
ELSIF :P108_CLUSTER_ID is NOT NULL and :P108_PRIVATE_IP is NOT NULL THEN
v_valid := TRUE;
ELSIF :P108_CLUSTER_ID is NOT NULL and :P108_PRIVATE_IP is NULL THEN
v_valid := FALSE;
ELSIF :P108_CLUSTER_ID is NULL and :P108_PRIVATE_IP is NOT NULL THEN
v_valid := FALSE;
END IF;
return v_valid;
END;
My problem is it is returning FALSE for all the cases.It works fine in SQL Command though..When I tried to Debug and use Firebug, I found that Text fields are not stored a null by default but as empty strings "" . Now I tried modifying my PL/SQL to check Private_IP against an empty string. But doesn't help. Can someone please tell me how I need to proceed.
Thanks

See SQL report for LIKE SEARCH I have just explained how Select list return value works..
Cheers,
Hari

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How can i add one field in the container for the standard task-90310004?

Hi,
Please let me know thw steps to add one field in the container for the standard task-90310004.
Usefull suggestions will be rewarded.
Regards,
Neslin.

<b>Hi,
Containers are used for holding Application data for Workflow purposes.
Event container
Task container
Workflow container
Role container
Binding is the linking of data from one container to the other for making data available all across the workflow.
But you can get values from one container to another container like this
Container(Con)
1. WF Con to Role, Wf con to task con, Wf con to event
and
2. Event con to wf con, task con to wof con
and
3. Method con to task con
and
4. Task con to method con
So, we don't have direct possible binding from task con to task con.
Thanks and Regards,
Prabhakar Dharmala</b>
Message was edited by:
Prabhakar Dharmala
But you can do pass values from first task con to wf con and again from wf con to another task con

Move values of one field symbol to other field symbol of different structur

Hi all,
i need to move values of one field symbol to other field symbol of different structure.
I need to perform operations like MOVE-CORRESPONDING on two field symbols of different structure.
How can i achieve this?
field symbol 1 have 2 field and field symbol2 have 4 fields....
Best Regards,
Vijay.

Hi,
You can use -
MOVE-CORRESPONDING <struct1> to <struc2>.
In this case it will move the contents of the components from struct1 to struct2 that has identical names.
You can refer this link also-
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3260358411d1829f0000e829fbfe/content.htm
Regards,
Sujit

The length of the password entry field in the BEx Analyser

Hi,
The password is 8 characters in the BW system.
When users changing their newly assigned passwords. When logging into the BEx Analyser, and prompted to change the password, a password entry box is displayed, with an entry field longer then 8 characters. Some users are therefore entering passwords longer then 8 characters. This is fine when they first login, but when they try come back to the system, their logon fails.
Can something be done to restrict the length of the password entry field in the BEx Analyser?
Many Thanks
Jonathan

Hi Jonathan
we are having the same problem - did you find a way to resolve this? I did not find any SAP notes referring to the issue.
Regards
Hayley

I am trying to pass the value of a field from the seeded page /oracle/apps/

I am trying to pass the value of a field from the seeded page /oracle/apps/asn/opportunity/webui/OpptyDetPG. The value I want is in the VO oracle.apps.asn.opportunity.server.OpportunityDetailsVO and the field PartyName.
I have created a button on the page whose destination URL is
OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName={#PartyName}
It opens the correct page, but in the URL it shows this
http://aa.com:8005/OA_HTML/OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName=&_ti=1897289736&oapc=177&oas=x5E2TIfP1Y0FykBt1ek4ug..
You can see that &CustName is not getting the proper value. Do I need to do something different?

You cannot call the form with OA.jsp . This is applicable only for OAF based pages registered as a function.
For calling a Form, use the below example:
You have to change the application responsibility key and form function name .
"form:PN:PN:STANDARD:XXPNTLEASE:QUERY_LEASE_ID={@QueryLeaseNumber}"
Regards,
Sudhakar Mani
http://www.oraclearea51.com

Add one field on the screen.

hi ,everybody.
i want to add one field on the progam SAPMV10A,it is VD05,The screen number is 300.the field name is TVLV-ABRVW.How can i do,thank you.

Check here:
SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payab;e --> Customer Accounts -> Master data --> Preparations for creating customer master data --> Adoption of Customer's own master data fields --> Businees Add-in:....

In BDCs, after adding one field to the screen, which one is the better proc

Hi,
My client requirement In BDCs, after recording the legacy data by using MM01, After some time adding one field to the screen, How can we record the for the new field.
If any one knows pls help me total process.
Warm regards,
Venkat.

Identify the screen in which this new field is added and simply add one more line to add the bdc record for this field in that screen.
If the screen is also entirely new, then you have to identify the previous screen, the okcode to go to this new screen and finally the next screen and the okcode to go to the next screen along with the field BDC record.
I don't think it is necessary to redo all the recording as long as you can follow the existing code.

Howset value to organization field in the selfregister user reqapprovalform

hi,
my use case is when ever end user performs self registration request goes to manager, manager will provide organization value manually to the approval form, But i want to set default value to that field, how to set default value to oranization field in the self register request approval form.
Edited by: 853559 on Dec 2, 2012 8:59 PM

hi,
i am using following code to pre- populate organization.
public class OrganizationPrepopulateAdapter
implements PrePopulationAdapter
public OrganizationPrepopulateAdapter()
public String prepopulateOrganization(RequestData requestData)
throws RequestServiceException
String Organization = "Xellerate Users";
return Organization;
public Serializable prepopulate(RequestData x0)
throws RequestServiceException
return prepopulateOrganization(x0);
but it is not prepopulating is any thing wrong.
Edited by: 853559 on Dec 3, 2012 12:46 PM

How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

how can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

Why do the 20 values have to be different? The same code should work even if some are equal.
What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
LabVIEW Champion . Do more with less code and in less time .

Change a value of a field in the work flow notification

Hi All,
I have a requirement,where in i need to change a value of a field in the work flow notification that i receive.
is it posiible
if so please provide some inputs.Thanks

Hi;
Please check below which could be helpful for your issue:
http://docs.oracle.com/cd/B14117_01/workflow.101/b10283/instal10.htm
http://docs.oracle.com/cd/B19306_01/workflow.102/b15853/T361836T361983.htm
http://docs.oracle.com/cd/E14571_01/integration.1111/e10226/hwf_config.htm#BHCJDGFJ
Regard
Helios

Constant value in one field in the Bex Report

Similar Messages

Maybe you are looking for