Constantconnect and Protect 2.0

I have read some PR news about Lenovo teaming with Yoggie to create a device "Constantconnect and Protect 2.0", which is the blend of Lenovo's Constantconnect expresscard and Yoggie's security expresscard.
I am trying to learn more about this device (availibility, etc.) as I recently deployed a few T400s into our business and was upset to learn that the constantconnect card we purchased was a 54mm expresscard and would therefore not work.
After many hours googling for a solution I came upon this new device, which is 34mm, awesome! If anyone can shed some light on this product development I might be able to rest easier. We travel and use blackberries a lot, this is a promising device, regardless of what others may think.
Thanks,

hi,
I have exactly the same G5 as you (but with more RAM) and I also have the MBP 17" C2D 2.33 GHz.
as far as I can tell, my MBP is more powerful running logic than my G5 is. I don't think you'll have any trouble getting your work done on the MBP you are looking at. in fact, you might even find that if a project you are working on gets close to pushing the MBP to its limits, it won't even play without freezing tracks on your G5.
the only thing to keep in mind is that you have more limited i/o options on the laptop.. meaning that if you are expecting to use an audio interface with many inputs and outputs working simultaneously, as well as a fast external firewire drive, then you'll be pushing the boundaries of your firewire bus to get enough bandwidth. whereas on the desktop machine, your extra drive space can be internal drives that have their own SATA bus, and your audio i/o can be either FW or PCI. but if you're just composing and producing music on the machine, without trying to record 26 simultaneous audio tracks and streaming vienna orchestra sounds off of a firewire drive all at once, then you won't have any trouble.

Similar Messages

ERROR -- Checksum error for Hidden and Protected item ID

Hello all,
I usually get the error:
Checksum error for Hidden and Protected item ID (10785219011206310), value (on), posted checksum (C1DEF33B4C8D57845151B7D18363B3D7), expected checksum (********************************), index_i (3), index_j (2), index_m (1);
I have already found one thread with this question - Checksum error for Hidden and Protected item ID
but there are no answers to this problem.
Any thoughts how to solve this and what is causing it??
Regards Pedro.

Pedro,
Read under the improved security section in the below article.
http://www.oracle.com/technology/products/database/application_express/html/3.1_new_features.html
I used to receive the same error because I was trying to update the value of the hidden and protected item on the same page repeatedly.
I changed the item type to hidden to avoid the error.
Hope this helps,
Dippy

Checksum error for Hidden and Protected item ID

Hi,
I created an icon which is called 'Find an employee'. When a clicked on that icon, it shows employee id and employee name. And near these names there is a select button. But, it gives the following error:
Checksum error for Hidden and Protected item ID (1558647128276141385), value (KING ), posted checksum (3F6EC88428199012945F76490A29168B), expected checksum (********************************), index_i (4), index_j (3), index_m (3);
Is there anyone who knows the reason of this error?
Regards,
Edited by: user13385266 on 23-Jul-2010 06:00

Erro Checksum error for Hidden and Protected item ID (1118508917223363)
Edited by: taylor gao on 2011-1-13 下午6:26

Checksum error for Hidden and Protected item

I have a region with 3 items - a Text field, a Text area and a Hidden and Protected item. When clicking on the save button the record should be written to the table. However I get the following error:
++Checksum error for Hidden and Protected item ID (7676217916943303), value (), posted checksum (1060941776BCEA7DDAE813A442DF01E3), expected checksum (********************************), index_i (8), index_j (1), index_m (3);++
When I change the hidden and protected field to a regular text field I am able to successfully process the page.
Do I have to do anything different when I have a hidden and protected field? Would appreciate any suggestions/comments to help resolve this issue.
Regards,
Ghazi

If you have client-side code that changes the value of a "Hidden and Protected" item after the item/value has been emitted to the page by Application Express, you need to change the item type to Hidden, instead.
Scott

HT5312 I want to know the questions and protection for my account because my account is locked I can not buy please help

I want to know the questions and protection for my account because my account is locked I can not buy please help

The page that you posted from tells you how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

What is the best malwear detection and protection for use on a Mac?

What is the best malwear detection and protection for use on a Mac?

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is foremost a problem of human behavior, and no technological fix alone is going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and Internet criminals. If you're better informed than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic, Soft32, and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission. All "YouTube downloaders" are in this category, though not all are necessarily malicious.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the left side of the address bar when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Hiding and Protecting Fields for Input in SRM 4.0 (BSP) Shopping Cart

On the Shopping Cart transaction(s) BBPSSC01 to BBPSSC03, the HTML templates are under ITS SERVICE BBPACCOUNT, and the main HTML template is called saplbbp_pdh_acc_2000_1. We want to grey out the G/L Account field and hide the business area field.Is there any other way to satisfy this requirement besides making an actual change to the HTML/BSP page and publishing. After researching this for quite a while I could not find another mechanism to grey out or hide fields. If the page has to be changed it looks like they have a code check if the field is disabled, can we simply set that field to true and the field will be Greyed Out and protected from input?
SAP ECC 5.0 WAS 6.40
Thanks

Rb,
Did you come up with a solution to your problem? I am wanting to do exactly what you have described in your message. The only way that i can think of is:
To create a Screen Variant using transaction code SHD0 for those transaction codes i.e. BBPSC01 etc.
SAP ECC 5, WAS 6.4, SRM server 5 / EBP 5

Provide, endprovide and protect

what is the difference between provide..endprovide and protect...endprotect statements
Title edited by: Alvaro Tejada Galindo on Jun 12, 2008 6:51 AM

Hi Sudheer,
Processing All Infotype Records (PA-PAD)
After the GET PERNR event, the internal tables of the infotypes contain records and are ready for processing.
Internal tables are generally processed line-by-line using the LOOP statement.
The internal tables of infotypes have features which allow special processing.
These tables are defined for specific intervals. In HR, these are time intervals or validity periods.
Processing of infotype records is time-dependent; by this we mean dependent on the data selection period entered on the selection screen. The data of several infotypes can be processed
at the same time and made available for a specific partial period.
Internal infotype tables are processed with the PROVIDE statement.
The syntax is as follows:
PROVIDE * FROM Pnnnn BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: / Pnnnn-<field>.
ENDPROVIDE.
nnnn stands for the four-digit infotype number. The relationship between the infotype and the data selection period of the selection screen is established using the PN/BEGDA and PN/ENDDA variables.
In the PROVIDE loop, the data of an infotype record is available for processing in the Pnnnn
structure.
Preventing Page Breaks: PROTECT
You can specify, either in the style or in the form, that a particular paragraph should not be split in two by a page break. If this page protect attribute is set, then the complete paragraph is always printed on one page. This property applies only to that particular paragraph.
This attribute is not intended to be used to protect all paragraphs against a page break. The point is that a page break is by its very nature a dynamic event and the exact point at which it occurs depends on the current state (length and contents) of the preceding text. It is also possible that you may want to protect only certain parts of a paragraph against a page break. One way to achieve this is to use the NEW-PAGE command immediately before the text concerned starts. Explicitly beginning a new page at this point should ensure that a further page break does not occur within the text. However, this technique is not change-friendly. For example, you format your text with the help of the NEW-PAGE command so that no page breaks occur where they should not. At a later time, you insert or delete some lines. These changes cause all the subsequent text to be moved relative to the printed page, and you must check each NEW-PAGE command you previously inserted to see if it is still in the correct place.
To allow you to define the areas to be protected against a page break on an individual basis, SAPscript provides the PROTECT.. ENDPROTECT command pair. If you enclose the text to be protected in these commands, then SAPscript will ensure that each line of this text is printed together on the same page. If the complete text fits in the space remaining on the current page, then it is printed on this page just as it would be if no PROTECT command had been used. If, however, the remaining space is not sufficient for the text, then the PROTECT command has the same effect as a NEW-PAGE command and text is printed on a new page.
Thus the PROTECT/ENDPROTECT commands may be regarded as a kind of conditional NEW-PAGE command, the condition being whether or not the lines enclosed between the two commands fit in the space remaining in the current main window.
Syntax:
/: PROTECT
/: ENDPROTECT
The text lines to be protected are enclosed between the two commands.
o     An ENDPROTECT command without a preceding PROTECT command has no effect.
o     If the terminating ENDPROTECT is missing, SAPscript assumes it at the end of the text.
o     PROTECT.. ENDPROTECT command pairs cannot be nested. If a second PROTECT command occurs before the first one has been terminated by an ENDPROTECT, it is ignored.
o     If the text enclosed by a PROTECT.. ENDPROTECT pair is itself too long for a single page, then a page break is generated immediately before the text and the text is printed in the normal way. It is then unavoidable that a page break will occur at some point within the text.
<REMOVED BY MODERATOR>
Regards,
Nitin.
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 6:51 AM

Use bottom and protect together

Hi all,
May I know the that possible to use BOTTOM and PROTECT together with few lines of text inbetween?
Eg:
BOTTOM
PROTECT
texttexttext
texttexttext
texttexttext
ENDPROTECT
ENDBOTTOM
or
PROTECT
BOTTOM
texttexttext
texttexttext
texttexttext
ENDBOTTOM
ENDPROTECT
Above code dont work for me. Please advice thank!!!

Hi Kek,
Refer this link,
[Bottom..Endbottom|http://help.sap.com/saphelp_nw70/helpdata/en/d6/0db4a9494511d182b70000e829fbfe/content.htm]
Regards,
Sravanthi

Target client is Productive and Protected againt client copy

Dear Team,
I have fresh install SAP R/3 4.7 with SQL .After installation I make new Client 110.
I login in 110 with sap* and password pass.
then via sccl i just for Client copy.this messege is comming that is "Target client is Productive and Protected againt client copy ".
Where is the problm. Plz help .
Thanks & Regards
jagdish Kumar

Maybe you have in production system in SCC4 the option
Protection: Client copier and comparision tool - Level 0 activated
Markus

Track and Protect Vs WaveSecure

Hi all i have a fully working Nokia X6 at last but thats another story
As the Subject says what one. I been reading up on them both for a day or to and can not work out what one is the better software
So views and opions on what one to get and why would be great.
Please give reasons though dont just say wavesecure because it better thanks all
Wrighty

I didn't know about Track and Protect, i had Wavesecure for years. I found it on the trackandprotect website and tried it out of curiousity. To test i had to buy some credits, 4,99 Euro is the minimal charge, good for 15 credits. Credits where needed to send sms with executable commands to your phone. After some tests I decided tp delete Wavesecure and stick to Track and Protect., so thanks for the tip Track and Protect is much more professional and has lots of more features and they all work great. Remote camera control and call back i never see before. Location requests are extremely fast and very accurate, it was spot on for me. Track and Protect also even works after sim change.
I also found a new video of Track and Protect on Youtube. It shows the App for Android.I think that after you see this video you will understand why i think track and Protect is better And again, you can still control your phone after someone changed the sim

"Track and Protect" is not applicable for W350i handset?

Dear Sir / Madam,
Kindly reply why software "Track and Protect" is not applicable for W350i handset? I had tried to download in my hand set by using link "http://wap.sonyericsson.com/fun/ ", but I did not find the application in list. If I can down load it, please send me how I can get the application. If this application is not supporting handset W350i then please make it compatible to W350i handset. In fact it should be supported by all handset.
Regards

Hi everyone,
Thanks for contacting the Track and Protect team and referring to this topic.
Unfortunely, Track and Protect is not available for non-Android or Symbian OS powered Sony Ericsson handsets. We had many requests for this, and it is something that we would really like to do for you, but we're bound to current technical limitations of these phones. But we promise to keep investigating them, who knows, one day...
Best regards and thanks for contacting us.
Klomptek, the Netherlands,
the Track and Protect team
Track and Protect is a remote management tool and security application that allows users to monitor, lock and wipe data from a lost or stolen cell phone. In addition to being able to secure content on the device through remote commands sent via the TnP web service, users are able to track the location of the missing phone in real time through the TnP online mapping system and take
photographs from the device of its present surroundings, with the ability to listen in and capture images of the phone’s current possessor. TnP allows users to collect enough information -- including current location, new phone number, operator ID and facial photographs -- to generate a substantive police report. All features are operable even after illegal SIM change.

Track and Protect

Dear Sirs, only a question
I buy Track and Protect, it woks without problem. I make one check to find the phone and is ok.
They give a recomendation: buy the credits before if you wont control the mobile in the future problems
I buy credits all.
For a problem I must change the phone number and I can't to translate de credits of
from my older number to the new number and then I lost the money. That is not good
Solved!
Go to Solution.

Dear Sutor2008, Welcome to the Nokia forum.
Please could you contact Track & Protect, they will be able to solve your issue, you will be able to find contact details at the bottom of their website, where they can provide further support in restoring your credits.
I hope this helps!
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Track and Protect on N8

I am using Track and Protect on my N8, probably the most valuable App there is for ANY phone. I blocked the installer by using that option in the menu, a great option, but now i have to use passcode even when installing a new App. Anybody know how to change this? I read review on my-symbian this is possible?

Is this link of any use to you?
http://www.allaboutsymbian.com/reviews/item/Track_and_Protect_2.php
Happy to have helped forum with a Support Ratio = 42.5

Upload cap file by net on client card, and protect cap file. Encode cap?

How upload cap file by internet on client card, and protect cap file. Encode cap file?
cap file > Server (keys) --> internet --> Client Program --> JCOP10 card
Can I use secure channel protocol ? How ?

Thanks for response.
Problem for me is communication between client program(computer) -> reader -> card.
The cap file is in Bin format.
Transmission can by easy scanned. How to protect this step of upload process?.
Internet is no problem.
My English is pure, and I have problem to understand specification.
Can I upload, install cap file encoded by Secure Channel Protocol '02' ?
If yes, then some example, log file can help me understand how to do this and how build APDU commend. I Use my program (Delphi) to communicate with reader and card.

Constantconnect and Protect 2.0

Similar Messages

Maybe you are looking for