Consume WSDL file in EJB Causes the Error while running in NWDI 7.2

Hi Experts,
I have WSDL File its working in the Portal.I have checked the WSDL file WS Navigator.
Importing the WSDL File:
I have follow these steps:
1. I have select the EJB Project and import the WSDL File.
2. Once the WSDL File is import in EJB Project i have right click the WSDL File and select the Create Web Service Client.
3. The Below Java Class File is created.
    i) Package-info.java
    ii) ObjectFactory.Java
   iii) Request.java
   iv) Response.java
   v) Remote.java
   vi) Service.java
4. And then i have create one client.java and Main.java File to execute the WSDL File.
5. Run the Main.java file and at the time it shows the below error
Exception in thread "main" java.lang.NoClassDefFoundError: com/sap/engine/interfaces/sca/logtrace/CallEntry$TraceLevel
at com.sap.engine.services.webservices.espbase.client.bindings.ConfigurationUtil.getTransportBinding(ConfigurationUtil.java:249)
at com.sap.engine.services.webservices.espbase.client.bindings.ConfigurationUtil.createClientConfiguration(ConfigurationUtil.java:109)
at com.sap.engine.services.webservices.espbase.client.jaxws.metadata.InterfaceMetadata.createClientConfigurationContext(InterfaceMetadata.java:178)
at com.sap.engine.services.webservices.espbase.client.jaxws.metadata.InterfaceMetadata.getProxy(InterfaceMetadata.java:70)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.getPort(SAPServiceDelegate.java:258)
at javax.xml.ws.Service.getPort(Service.java:92)
at com.sap.tutorial.testwebser1ejb.TestAddService.getTestAddPort(TestAddService.java:38)
at com.sap.tutorial.testwebser1ejb.TestAddClient.testAdd(TestAddClient.java:12)
at com.sap.tutorial.testwebser1ejb.MainClass.main(MainClass.java:12)
Caused by: java.lang.ClassNotFoundException: com.sap.engine.interfaces.sca.logtrace.CallEntry$TraceLevel
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
... 9 more
Please reply if there is a problem in Importing and calling the WSDL file.Reply will help me a lot.
Thanks & Regards,
SatheshKumar R

Are you using the same version for both NWDS and your target SAP NetWeaver system?

Similar Messages

How to find out the column causing the error while doing update or insert

I'm getting the below error when attempt to update or insert a long string that is more than its defined length in the DB2. For example in table the column length is defined as 50, however from UI the data for that column is more than 50 chars.
{color:#ff0000}**Caused by: com.ibm.db2.jcc.b.SqlException: DB2 SQL error: SQLCODE: -302, SQLSTAT**
**E: 22001, SQLERRMC: null**
**at com.ibm.db2.jcc.b.hh.b(hh.java:1369)**
**at com.ibm.db2.jcc.b.hh.c(hh.java:1356)**{color}
The above issue can be fixed by setting maxlength in the UI itself. However in my case, there is a backend program trying to insert or update load of records. If the exact column name causing the error is known, it will be helpful to load the data properly in the next attempt.
I have worked around it using SQLWarning and DataTruncation, but couldn't find the solution yet.
Any help on this issue will be really appreciated.

Medraf wrote:
what is validator? Is it like validation.xml in struts? Are you suggesting like defining set of validation rules in the xml and apply the same for each record before doing any update or insert in DB? If so, then I could implement this validation logic in my backend code, however it may take more time to complete the batch prcoess.
How you implement doesn't matter.
However given a schema generating code for such validation is trivially simple at least for field types and sizes. Relationships are harder but those can be handled via custom rules.
Alternatively I'm looking for some kind of API in JDBC or Hibernate which gives the detailed sql exception message containing the error info like the column name and the reason for failure while update or insert. If not possible, then validation logic needs to be implemented.Having seen something similar in Oracle years ago I seriously doubt that you are going find it magically appearing in JDBC/hibernate. There might be warning on the SQLException (see the java docs for SQLException) but I wouldn't count on it. Other than that the only possibility is making some sort of call in db2 itself that tells you the error. Only problem with that is it might require the context which might not be available once you see the error (presuming, especially for performance, that you are using batch processing.)
As a start figure out how to find out using only db2 (docs and/or db2 forums.)

BYMONTHDAY is causing the error while opening the ics file in outlook when event is exported from SharePoint Calendar

Hi All,
I am trying to parse the SharePoint recurrence data to get the RRULE for the ics file the RRULE parsed works fine for Yearly and Daily but it causes error when opening the ics file for the Monthly and
weekly recurrence recurrence. I have opened the ics file in the notepad and observed that the BYDAY and BYMONTHDAY causes the problem. If I remove the tag the file opens fine but with wrong recurrence pattern.
Any help will be appreciated.
Regards
Ajeet
Ajeet

Ajeet,
I see that this is an extremely old post, but I thought I would refresh it with a bit more info.
I wish I had found this post a few days ago. I realized the same thing as well. I don't quite understand the reasoning behind requiring the by day date must be the same as the event date. Another thing with rrecurrence is that if
you pick a day of the week for a recurrence (i.e. Friday), then the start date must also occur on a Friday (I am just casting it as the first Friday of the month).
I have come into this same issue with the BYMONTHDAY. I am currently working on trying to configure an .ICS file to allow for multiple monthly recurrences, but it appears Outlook does not support multiple days within an event (determined by trying
to create an even in Outlook and picking the recurrence option). It seems that you are only allowed to have an event on (for example) every Friday of each month, or the (x) day of each month. You cannot set any other occurrences of any other day
within the same ICS file. Hopefully someone else will find this information useful.
Cheers,
Tracy

Help me to fix the error while running DBMaintain Against the Database Schema in ASE.

Hi All,
I am trying to install sybase mobiliser platform 5.1 SP 03.I am referring the following guide
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01871.0513/pdf/Mobiliser_Platform_Installation_Guide_5.1…
Now I have configured the ASE database server with default settings and now it is running fine.
Now my concerns are as follows:
1) I have executed the database schema (mobr5): 001_MONEY_drop_and_create_user.DDL with the help of linux command
isql -Usa -SASE1 -Phello@123 -i/opt/sybase/db/sql/001_MONEY_drop_and_create_user.DDL -o/opt/sybase/ASE-15_0/install/ASE1.log
How do I check the created database schema and user with default name 'mobr5'?
2) While running DBMaintain Against the Database Schema, I have followed the steps mentioned in the guide and made the following changes in the file dbmaintain.properties.ase
database.driverClassName=com.sybase.jdbc4.jdbc.SybDriver
database.url=jdbc:sybase:Tds:ASE1:5000/mobr5
database.userName=mobr5
database.schemaNames=mobr5
database.password=paybox
#Must be set if the driver is not packaged inside the scriptarchive or is present on the classpath
#e.g. /path/to/driver.jar
#database.driverLocation=/path/to/jconnect.jar
database.driverLocation=/opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase.jar
database.driverLocation=/opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-vanilla.jar
When I execute the script archives ,
java –jar /opt/sybase/db/sql/com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-driverless.jar -c /opt/sybase/db/sql/dbmaintain.properties.ase
java –jar com.sybase365.mobiliser.vanilla.standalone-5.1.3.RELEASE-scriptarchive-ase-vanilla-driverless.jar -c dbmaintain.properties.ase
I get the following error:
So please help me to resolve the issues.

Hi All,
Issue is resolved and database has been updated successfully..
Error was in database .url field of dbmaintain.properties.ase file.
I have changed the database.url field from database.url=jdbc:sybase:Tds:ASE1:5000/mobr5
to database.url=jdbc:sybase:Tds:<Private IP of Linux instance>:5000/mobr5
Note:- I am installing mobiliser platform on AWS cloud.So I have made use of Private IP address of AWS Linux instance.

Getting the error while running request

Hi,
While running "Budgetary control optimizer" we are getting the following error.
APP-FND-00806: The default value XXXXX is invalid for the P_LEDGER_ID segment. Your default value will be ignored. Please inform your system administrator that:
Add the value XXXXXX to the value set for segment P_LEDGER_ID, or choose another default value in the Key Flexfield Segments form or Descriptive Flexfield Segments form. Use the Edit Concurrent Program or Define Report Set form for Standard Report Submission report defaults.
Value XXXXXX for the flexfield segment Ledger Name does not exist in the value set GL_SRS_LEDGER_PRIMANDSECD.
How do i fix this error???
Thanks

Hi;
Please check R12 Accounting Errors Encountered FAQs [ID 601306.1] and search as APP-FND-00806:
Regard
Helios

Error while running the program of deferred Tax ( New)Program Name RFUMSV50

Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PM

Check the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi

Error while running perl adpreclone.pl dbTier

Hi all,
Error while running perl adpreclone.pl dbTier
Running Rapid Clone with command...
perl /u02/app/orap/product/9.2.0/appsutil/bin/adclone.pl java=/u02/app/orap/product/9.2.0/jre/1.4.2 mode=stage stage=/u02/app/orap/product/9.2.0/appsutil/clone component=dbTier method=CUSTOM dbctx=/u02/app/orap/product/9.2.0/appsutil/DEV_XXX.xml showProgress
Beginning database tier Stage - Fri Jun 26 12:16:45 2009
APPS Password : appsdev
Log file located at /u02/app/orap/product/9.2.0/appsutil/log/DEV_jos11/StageDBTier_06261216.log
/ 75% completed
RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
Raised by oracle.apps.ad.tools.AdCreateCtlFile
RC-40001: Fatal: Failed to create sql script adcrdbclone.sql for recreating control files at target
- 75% completed
ERROR while running Stage...
Checked metalink found the below solution but please the me interconnect_name is what ?
Check if the column interconnect_name from the fnd_database_instances has a value. If not, please update it with the correct value:
update FND_DATABASE_INSTANCES
set INTERCONNECT_NAME = 'xxx';
commit;
Rerun the process.
Thanks,
Bhanu Chander.

Hi,
Alert log is normal.
but adcfgclone.pl log is
/u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/dbfinfo.lst created Successfully.
Generating /u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/addbhomsrc.xml which will contain the unique mount points
NODE_ID Column Availability: true
Node Id Column is available. dbfinfo.lst will contain the node list
Host Column Availability: true
Exception occurred while querying the datamodel: java.lang.NullPointerException
StackTrace:
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:393)
at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1325)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
Raised by oracle.apps.ad.tools.AdCreateCtlFile
RC-50208: Exception in method gen_crctrfclone_sql
RC-50208: Exception in Constructor AdCreateCtlFile
Raised by oracle.apps.ad.tools.AdCreateCtlFile
StackTrace:
java.lang.Exception
at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1348)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
RC-40001: Failed to create sql script adcrdbclone.sql for recreating control files at target
Raised by oracle.apps.ad.clone.StageDatabase
Thanks,
Bhanu Chander

Error while running 'ldifde.exe' to import the schema file

Hello,
I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution.
Regards.
Ashane Deshapriya ( MCP )

Can you run these commands from an elevated powershell and try to install exchange.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
If that also fails please post the error.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.

Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic

Form debugging - Which line is causing the error?

I have a form that I'm working on, and when I run the form like normal, just as the end user would, I keep getting an error, "FRM-41039: Invalid Alert ID 0." I can't figure out where this error is coming from in my code. It seems that it must have something to do with timing, because in trying to track down the error, when I run the form in debug mode, obviously the timing is slower as I go line-by-line in the code to see which line may be causing the error, but when I do that, I don't get the same error. I'm not close to being an expert when it comes to design-time debugging in forms, and I was wondering if someone with more experience could point me in the right direction. Is there any way that I can somehow determine which line of code is causing this error to raise? If I could identify the line of code, I could maybe find out which alert it's looking for, right? Then I could maybe narrow down the problem a bit more. Anyone have any ideas? Thanks in advance.
YEX
<)))><

Like it says :"FRM-41039: Invalid Alert ID 0." Alert does not exist. So try to find line in your code which contain something like:
Show_Alert("<name of alert>")
Or Alert with this name dows not exist or you are misspelling the name of existing Alert.

How to rectify the error in running the apk file in emulator.

hi
I have developed the air based android application and got .apk file.I installed the .apk file in emulator which is version 2.3.1 android but i got the error
when running it as
"The Application HelloWorld Has Stopped Unexpectedly. Please Try Again"
How to rectify the problem.Please anybody help me with this what the exact problem in this...................
thanks in advance.....................

Hi Anson,
You looked at old installation guide.
I see you use old UI components which were released in May 2013.
Important Note: Please use new UI with new SAP Fiori Launchpad
New UI components have UI extension points and work with new SAP Fiori Launchpad.
Please find correct components based on your Backend version.
SAP Fiori - Add-on quick reference for transactional apps
Regards, Masa
SAP Customer Experience Group - CEG

If you have two public class in a java file what will be the error ?

Q:If you have two public class in a java file what will be the error and how will you remove that.?

Kannan_S wrote:
I dont want you to be on that list . Here goes my explanation..
A class is well defined with members and functions
An abstract class is not defined well as compared to a full fledged class (talking more generically)
An interface is more abstract.
I was asking the author who has posted this question to be like a class(very clear)
and not either as an abstract class or an interface
Hope i have made it clear..Not in the slightest. This has absolutely no bearing whatsoever on the question asked. Not to mention that classes are classes, and all equal in the eyes of the compiler, be they abstract, concrete or interfaces. It's difficult to see what your point is, to be honest, but I suspect it wouldn't be worth seeing anyway

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.

Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.

Error while running ejbc. Fatal error from EJB Compiler ---- Error while pr

Hi!
I was deploying a test application for a session bean with sun 1 studio 5 and I started getting this message while deploying.
I had tested the bean previously and I had no problems.
I found this in the sun app server 7 release notes, but I don't understand what I'm supposed to do...
"Deployment of CMP beans fails.
The following error is thrown because there are no <query-params> entries in the container-managed persistence (CMP) bean in sun-ejb-jar.xml file:
Error while running ejbc. Fatal error from EJB Compiler ---- Error while processing CMP beans.
Solution
Even if it isn't necessary for the CMP beans, add the query-params tag for finders in the sun-ejb-jar.xml file with the empty parameters."
Here is my sun-ejb-jar.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 EJB 2.0//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_0-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>GestorDoBanco_EJBModule</name>
<ejb>
<ejb-name>Cliente</ejb-name>
<jndi-name>ejb/Cliente</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Cliente.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>ClienteAssociadoAConta</ejb-name>
<jndi-name>ejb/ClienteAssociadoAConta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/ClienteAssociadoAConta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Conta</ejb-name>
<jndi-name>ejb/Conta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Conta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>GestorDoBanco</ejb-name>
<jndi-name>ejb/GestorDoBanco</jndi-name>
<pass-by-reference>false</pass-by-reference>
</ejb>
<ejb>
<ejb-name>MensagemM003</ejb-name>
<jndi-name>ejb/MensagemM003</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM003Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM003Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012</ejb-name>
<jndi-name>ejb/MensagemM012</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM012Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM103</ejb-name>
<jndi-name>ejb/MensagemM103</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM103.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM112</ejb-name>
<jndi-name>ejb/MensagemM112</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM112.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Registo</ejb-name>
<jndi-name>ejb/Registo</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Registo.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoConfirmada</ejb-name>
<jndi-name>ejb/TransaccaoConfirmada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoConfirmada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoFinalizada</ejb-name>
<jndi-name>ejb/TransaccaoFinalizada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoFinalizada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoIniciada</ejb-name>
<jndi-name>ejb/TransaccaoIniciada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoIniciada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<pm-descriptors>
<pm-descriptor>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
<pm-class-generator>com.iplanet.ias.persistence.internal.ejb.ejbc.JDOCodeGenerator</pm-class-generator>
<pm-mapping-factory>com.iplanet.ias.cmp.NullFactory</pm-mapping-factory>
</pm-descriptor>
<pm-inuse>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
</pm-inuse>
</pm-descriptors>
<cmp-resource>
<jndi-name>mysqlpmanager</jndi-name>
<default-resource-principal>
<name>bes</name>
<password>besbes</password>
</default-resource-principal>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Thanks in advance for any help.
Nuno

http://docs.sun.com/source/817-2175-10/decmp.html
Please go to the above docs and look thru the examples given in it.
Example 2
This query returns all products in a specified price range. It defines two query parameters which are the lower and upper bound for the price: double low, double high. The filter compares the query parameters with the price field:
"low < price && price < high"
The finder element of the sun-ejb-jar.xml file would look like this:
<finder>
<method-name>findInRange</method-name>
<query-params>double low, double high</query-params>
<query-filter>low < price && price &lt
high</query-filter
</finder>
I hope this hepls. In your case u just have to make it null.

Internal Server Error while running JSP file (Oracle AS - HP Unix)

Hello Friends,
I have created a JSP file in which I am trying to connect the database using oracle.jdbc.pool directory. But it shows an error message as:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
the path for pool package is:
/appltest/apps/prodora/iAS/oem_webstage/oracle/jdbc/pool
the location of JSP file is:
/appltest/apps/prodcomn/portal/TEST_test/test
What I think is I have to play with the CLASSPATh entries, but dont know how. Please help me in solving this issue...
For your reference the JSP code is:
<%@ page import="java.sql.*, javax.sql.*, oracle.jdbc.pool.*" %>
<jsp:useBean id="ods" class="oracle.jdbc.pool.OracleConnectionCacheImpl" scope="session" />
<%
try
ods.setURL("jdbc:oracle:thin:@test:1546:test");
ods.setUser("kpm_hr");
ods.setPassword("kpm_hr");
Connection conn = ods.getConnection();
Statement stmt = conn.createStatement();
Resultset rset = stmt.executeQuery("select first_name,last_name from kpm_hr.kpm_hr_emp_mst where empcode='P0580'");
rset.next();
out.println(rset.getString(1)+" "+rset.getString(2);
catch(SQLException e)
out.println(e);
Thanks in adavnce,
Ankur
Regards,
Ankur Bhatia

Just to verify, which relevant log files have you found?
catch(SQLException e) {
out.println(e);
} Have you search the console log file?
A quick observation reveals that your jsp is just a standalone java program executed inside jsp. Suppose you just run it as a standalone program. Any error then?
Another way going forward is to install oc4j standalone of the same version. It is very easy to install: just download the oc4j-extended.zip and unzip it and run "java -jar oc4j.jar". Put you jsp inside j2ee/home/default-web-app and run. You should see relevant log messages in j2ee/home/log/server.log and j2ee/home/application-deployments/yourApp/application.log.
You should have Jdeveloper of some appropriate version installed. If you have not, install one. It might be not a little bit high learning curve at first, but the rewards are quick and amazing, especially since jdev 10.1.3. (I am speaking from my experience.) Try it with Jdeveloper.

Consume WSDL file in EJB Causes the Error while running in NWDI 7.2

Similar Messages

Maybe you are looking for