Refresh Navigation with Appintegrator iViews

I'm currently working on migrating our existing intranet (using Lotus Notes as a content management system) into SAP portal. I'm planning to use appintegrator iviews to render the site content.
My biggest challenge appears to be to figure out how to "refresh" the navigation to keep insyc with what's displayed in the iview. For example, let's say you are viewing a news article about an upcoming company event under "News" page (in the details navigation, "News" is hightlighted). There is a link within the news article to go to a particular document with more detailed information on the event under "Event" page. When you click on the link, the particular "event" article appears, but the navigation is still highlighting "News" area.
I hope this makes sense to everyone. Does anyone have a brilliant idea how to solve this problem?

Mina,
Here is one way.
If you want the navigation to "sync" when a link is clicked in one of your content pages: Create an iView to contain the content you want to link to. This creates a navigational node in the portal that you can then target. (Attach this iView to an appropriate role so that it appears in the navigation.)
From the page that you want to link to this page, change the href to the following:
<A HREF="myLink"
onclick="return EPCM.doNavigate
('ROLES://portal_content/myRole/myIView')">
This is an HTML Link
</A>
For more info check out: http://help.sap.com/saphelp_nw2004s/helpdata/en/43/0029d0e7371aa2e10000000a422035/content.htm
Regards,
Steph.

Similar Messages

Replace Detailed navigation with custom iview

Hi experts!!
I would like to know how i can replace the detailed navigation view with a custom iview.
Thank u in advance!!!

check the below thread for more information
https://forums.sdn.sap.com/click.jspa?searchID=25630709&messageID=6367244
Detailed navigation iview is assinged to Default framework page.
My suggestion is you duplicate the default framework page and can replace the detailed navigaiton iview with ur iview. Also assign this cutom framework page to your user id by display rules.
Raghu

How to use the TeamViewer with other iViews

Hi,
I would like to use some own developed iViews together with the TeamViewer. We are using the iViews in ESS already and now the question is, how can we link them to the TeamViewer?
We are running EP6 Patch2 HF4.
Thanks
Bianca

Hi.
Just add the teamviewer to the "dynamic navigation" of your iview.
Register listeners for the teamviewer events, and also call the teamviewer on init to get the selected person.
I've found that the teamviewer doesn't always respond (only once the first time it's loaded), then you should check a cookie value.
I'll update this post later with more exact info on the teamviewer event's etc.
Regards, Mikael

Any Security Problems with Navigation with Short URLs?

Hi ,
I want to use Navigation with Short URLs for my users to access the portal. But if the users give that Short URLs to other non-users , will the URL open?
I will give the role for the users only. Non-users will not have particular role.
Are these Navigation with Short URLs are safe to use?
Advise me.

Hi,
The iview have "EveryOne Role" and "Super Admin Role".
The portal will not allow any "anonymous" users, because it needs atleast "EveryOne Role" for the access.
Will this create any problem.
I think the "EveryOne Role" is there for the user, if the iview1 assigned for role1 but still in the permissions of iview1 have the "Everyonerole" , it is allowing user to access this right?
Then I need to remove the EveryOne Role from the permissions.
Regards
Kiran

Data lost after navigating to other iview

Hi
I have two web dynpro iviews iview1 and iview2 in portal.
Iview1 has link for navigating to iview2.
I am using following code for navigation :
WDPortalNavigation.navigateAbsolute("<<url>>",WDPortalNavigationMode.SHOW_INPLACE,WDPortalNavigationHistoryMode.ALLOW_DUPLICATIONS,<<parameters>>);
User can navigate back to iview1 by clicking 'Back' button in iview2.
However, this results in loss of any unsaved data, like search result, in iview1.
When I change WDPortalNavigationMode to SHOW_HEADERLESS_PORTAL unsaved data is not lost but iview opens in new window.Same is the case with setting work protect mode to STANDARD.
Can we preserve unsaved data while navigating to other iview in the same window?Is it possible?
Thanks in advance,
Apurva

Hi
I have tried changing work protect mode to STANDARD, but with this iview is opened in new window and not in same window.
I need to display second iview in same window according to business requirements.
Regards,
Apurva

Cube refresh fails with an error below

Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PM

I work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM

Is CPA Cache refresh linked with ftp or file pooling process in XI?

Hi,
I have a file to file scenario using Transport protocol as FTP in XI 3.0 SP 15.
When we try to sends some file using ftp protocol where we are using
FTP connection parameters
Server                          = <CORRECT IP>,
Port                               = 21 ,
User name                <CORRECT NAME>,
Password                  <PASSWORD> ,
Data Connection           = Active
Connection Seq         = None
Connection Mode         = Permanently
Transfer Mode            =   Text
Processing Parameters
Quality of Service    = Exactly Once
Pooling Interval        = 1 sec
Processing Mode    = delete
File Type                   = Text
File encoding           = utf-8
The problem we are facing like some time the ftp is not working even the file is present in the location for pick up. If few files are stacked up to be collected then when we are using CPA Cache refresh in Full mode manually then it fetches all the files from the location but the problem is that ,we have a time constraint for this process to be completed in just 60 seconds if we are not able to pick up a file in 60 Secs then the file will be treated as invalid.
So I just want to know how Manual CPA CACHE refresh in full mode generally solve the problem.
Next if more files will be stacked up then cache refresh also failed to solve the problem and more cache refresh result in NOT pooling any other files in XI including the above discussed flow.
So,in anyway Cache refresh linked with ftp or file pooling process in XI?
Please assist me in correctly understating the whole problem and what solution could be put to solve this.
Thanks,
Satya
Edited by: Satya Jethy on Mar 14, 2008 12:28 PM

Hi Suraj,
If you see my query i have mentioned that the pooling interval is 1 Second.
If we are not able to pick the file with in 60 Secs as this is a real time scenario so the file will be treated as a invalid file.
Moreover this problem is happening some time.
I have also checked the component monitoring it is saying everything is ok as because we are receiving the file with out any error and the file transfer is also success.The only problem is that it is not collecting the files from the given location.
Hope i make you understnad the problem .If not please revert back i will try to explain once again.
Thanks,
Satya

Navigation with rollovers

Hi,
I have the nice task to evalute the Portal of the 9iAS v2.
We have a nice web which should be ported to the Portal.
I have there a nice Navigation Bar with rollovers.
How can I build this navigation? I can use "Page Links" from the items to build a navigation with links.
But I want to use images.
My questions:
1. Are there any build in features to do images with links - rollovers with links
and if not - how can I do this.
2. when I use Page Links I can find the right page just by name - how can I do this when
I have to enter this manually?
thanks a lot,
michael

Here's the bad news - letting a graphics application write the HTML for a production site is not a viable method. The tables produced are completely rigid and will break unexpectedly as you build your page and add content (thereby changing the 'shape' of the original layout plan). Please read this to see why that's the case -
http://www.apptools.com/rants/spans.php
The spans are what create "gaps" unexpectedly as the table tries to maintain its shape. I believe the only way to fix this is to not use that FW HTML at all.

How to set the screen size with nested Iview screen

Can someone show me how to set the screen size with nested IView screen.
at the moment i only try it with trial and error untill it looks somewhat close. Is there a property in VC to set the size for Height and width.
The same question is for the form. the form elements inside the form is easy but the actual form is still a challenge.

Hi,
Yes you are correct ,Still the Form and iview are not able to change thier Layout Structure using a Propery.
it is available with VC7.1
Govindu

Page with two iviews

Hi all,
I created in portal (portal content) a new page with two iviews. The first iview it is a bsp site with different links (html links). At the moment if I press a link in this iview WAD web template opens, but it open in the same iview and I wish that it opens in other iview. How can I archieve it?
thank you in advance
Erwin

Hi,
I think your requirement is, your have two iviews in a page. In one iview you have a link and on clicking the link you want to load the target application in another iview of the same page. If this is your requirement the follow the following istructions.
a) In the page of the source iview on clicking the link execute a java script function and raise an EPCM event.
Code to raise EPCM event
EPCM.raiseEvent("urn:com.epcf.EPCFProducer", "myAccGetResultsEvent", "ShowResults");
b) In the page of the second iview subscribe that EPCM event.
Code to subscribe the EPCM event.
EPCM.subscribeEvent("urn:com.epcf.EPCFProducer", "myAccGetResultsEvent", eventHandler);
Write a java script function named eventHandler with one argument and call your target application from this javascript function.
For your reference
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=epcmsubscribeEventraise&adv=false&sortby=cm_rnd_rankvalue
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=epcmsubscribeEventraise&adv=false&sortby=cm_rnd_rankvalue
Regards
Shanmukha Rao Banisetti

I am trying to use apple configurator with ipads. I have been successful with all our ipads but 1. It will not allow me to add apps. The error I get is that it is refreshed but with errors e

I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either

Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile.

Website upgraded to CR2008/VS2008, reptviewer-refresh hangs with a wait msg

Crystal Report IX.2/VS2005 website app converted to CR2008/VS2008: compiles clean, runs, but reportviewer-refresh hangs with "Please wait while the document is being processed" message. Can anybody suggest a solution or hypothesis?
detail:
I've converted a legacy Crystal IX.2/Visual Studio 2005 web-site application to Crystal 2007/Visual Studio 2008. The compile is free of all errors and warnings. The application operates correctly and the Crystal report-viewer screen comes up with the correct initial page of information. But when I click a Next/Prev/First/ast icon, I get a stuck with a perpetual "Please wait while the document is being processed" message. In addition, the time for the Reportviewer to appear with the first page of the report information is considerably slower (2X, 3X) than it is with the original VS2005/CR IX.2 website project. We are using ODBC to Oracle 11g.
I've searched for hits on the web and in this forum, and have tried various experiments with the registration, etc. - but nothing fixes this for me. Can anybody suggest a hypothesis or solution?
Thanks

Re: "Need more info. Are you using ASP.NET or are you using classic ASP and the RDC report engine?
Thanks Don,
We're using ASP.Net. The website project was originally written using Visual Studio 2005, Crystal Reports XI.2, and VB.Net.
The app is normally run on IIS 6.0, but I am executing the converted version in the Visual Studio 2008 debugger, i.e. without IIS. The browser is IExplorer 8.0.
I have copied and upgraded the project to Visual Studio 2008, Crystal Reports 2008, still VB.Net. It compiles clean, without any error messages of warning. When I run the app, the various report selection pages appear correctly, and the correct report-viewer initial page appears as well (although in 60 seconds versus 15 seconds originally. The main problem is that the viewer does not refresh when I click the next or last icon, a wait message popup appears perpetually. The data access is ODBC to Oracle 11g.
For comparion, below are the assembly sections of the web.config file from both the original and upgraded versions of the project. If there is any more information that would be helpful, I can post or email it. Thanks for looking into this,
Robert Brandon, Raytheon
1. Original assemblies from the VS2005/CR IX..2 project (works perfectly):
          <compilation debug="true" strict="false" explicit="true">
               <assemblies>
                    <add assembly="CrystalDecisions.Enterprise, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Shared, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Web, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Web.Services, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System.Drawing, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System.Data, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Xml, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/><add assembly="CrystalDecisions.CrystalReports.Engine, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportSource, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
                    <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/></assemblies></compilation>
          <pages>
               <namespaces>
                    <clear/>
                    <add namespace="System"/>
                    <add namespace="System.Collections"/>
                    <add namespace="System.Collections.Specialized"/>
                    <add namespace="System.Configuration"/>
                    <add namespace="System.Text"/>
                    <add namespace="System.Text.RegularExpressions"/>
                    <add namespace="System.Web"/>
                    <add namespace="System.Web.Caching"/>
                    <add namespace="System.Web.SessionState"/>
                    <add namespace="System.Web.Security"/>
                    <add namespace="System.Web.Profile"/>
                    <add namespace="System.Web.UI"/>
                    <add namespace="System.Web.UI.WebControls"/>
                    <add namespace="System.Web.UI.WebControls.WebParts"/>
                    <add namespace="System.Web.UI.HtmlControls"/>
               </namespaces>
2. New assemblies from the upgraded VS2008/CR 2008 project (viewer does not refresh):
          <compilation debug="true" strict="false" explicit="true">
               <assemblies>
                    <!add assembly="CrystalDecisions.Enterprise, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <!add assembly="CrystalDecisions.Enterprise.Shared, Version=11.5.3300.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Web, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Web.Services, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System.Drawing, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
                    <add assembly="System.Data, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Xml, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/><add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
                    <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
                    <add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
               </assemblies></compilation>
          <pages>
               <namespaces>
                    <clear/>
                    <add namespace="System"/>
                    <add namespace="System.Collections"/>
                    <add namespace="System.Collections.Specialized"/>
                    <add namespace="System.Configuration"/>
                    <add namespace="System.Text"/>
                    <add namespace="System.Text.RegularExpressions"/>
                    <add namespace="System.Web"/>
                    <add namespace="System.Web.Caching"/>
                    <add namespace="System.Web.SessionState"/>
                    <add namespace="System.Web.Security"/>
                    <add namespace="System.Web.Profile"/>
                    <add namespace="System.Web.UI"/>
                    <add namespace="System.Web.UI.WebControls"/>
                    <add namespace="System.Web.UI.WebControls.WebParts"/>
                    <add namespace="System.Web.UI.HtmlControls"/>
               </namespaces>

Best approach -Tabs based ADF Tree left side navigation with Dynamic Regions with out UI Shell

Hi,
Somebody can help for the best approach to implement the following requirement.
Req: When the user select the ADF Tree left side navigation menu, each menu will open as multiple tabs(Dynamic Tabs) in right side content area with out UI Shell Template.
I completed the
Step-1: From the Model project, I can able to render ADF Tree in the using view and view links. I can get the adf tree which is having 3 menu items. Each menu item having 2 sub menu's.
I took each menu item as one(1) taskflow, each taskflow will have two(2) fragments.
Total I have 3 task flows as Menu Items and 6 fragments for sub menu's.
Step-2: My question is How do I implement Tab based the ADF tree navigation (left side area to dynamic regions in content area) through dynamic regions? Please provide the steps in view layers.

Than ks for your response.
This is working fine for ADF Tree navigation with dynamic regions if the taskflow having only one fragment. if the taskflow having more than one fragments, this will not work. The following conditions are always satisfies one page fragment of either "employees" or "departments" task flow. If the "employees" task flow have 2 page fragments, it's not work even you pass parameters through routers.
public TaskFlowId getDynamicTaskFlowId() {
if (currentTaskFlowID == null ||
currentTaskFlowID.equalsIgnoreCase(“employees”)) {
return TaskFlowId.parse(employeetaskFlowId);
if (currentTaskFlowID != null &&
currentTaskFlowID.equalsIgnoreCase(“departments”)) {
return TaskFlowId.parse(departmetaskFlowId);
return TaskFlowId.parse(employeetaskFlowId);
My question is "Same use case with Dynamic Tabs" when the user click on any adf tree node.

Using Spry Vertical Navigation with Templates-Need to indicate current page

Using Spry Vertical Navigation with the Dreamweaver templates. Using editable attributes etc., the current page mennu item does not seem to be changing. How do you indicate the. current page.

Persistent Page Indicator on Site Wide CSS Menus:
http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

JTable's Cell navigation with TAB

Dear ALL
I have face one problem in JTable's cell navigation with TAB. The problem as describe bellow.
I have two columns NAME and ADDRESS. Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS column. At the end of row controll comes on first row second column that means focus on ADDRESS column's first cell.
Please give me some hints.
Thanks in advance.
Amit

Your description doesn't make any sense (to me at least) so I don't know what your problem is or what you are asking to be changed.
The normal tab order is Left to Right, Top to Bottom. So if the focus is at the top/left normal tabbing would be:
Row 0, Column 0 (name 0)
Row 0 Column 1 (address 0)
Row 1, Column0 (name 1)
Row 1, Column 1 (address 1)
Row 2, Column 0 (name 2)
Row 2, Column 1 (address 2)
Your question seems to imply that your tab from address to addreass, which doesn't make sense.
"Set focus on ADDRESS column's first cell. now if i am press tab key then focus controll comes on second cell which is the ADDRESS "

Refresh Navigation with Appintegrator iViews

Similar Messages

Maybe you are looking for