Consumer IR device and blue screen effect

Hi i am vivek
my PC    "hp pavilion dv6 3017tu   windows 7 ultimate 32bit "
i am getting the blue screen effect i can't login to windows then i opened in safe mode and
I just uninstalled the consumer IR device since it was flagged in the device manager. I heard in some forums that if you uninstalled it and reboot, the system will try to reinstall it again. so i checked the device manager and didn't found the consumer IR device. So how can I get it back or install it back?  and how to restart  windows without  blue screen effect  help me  please.......
my minidump file link http://www.mediafire.com/download.php?kcazz5duh4cs​tnh     in mediafire please  chekit out and help me .................

Hi,
Download the ENE CIR installer on the link below and save it to your Desktop.
ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44983.exe
When the download has completed, right click the installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

  • Blue screen effect in elements?

    is there a blue screen effect in premiere elements

    aglioolio
    What version of Premiere Elements are you using and on what computer operating system is it running.
    The Premiere Elements Mac users do not have Chroma Key, Blue Screen Key, or Green Screen Key. Often the Videomerge is suggested for those users as a workaround. I do not favor Videomerge.
    Especially if you are a Premiere Elements Mac user (but also if you are a Premiere Elements Windows user), you might want to take a look at the Difference Matte in the keying choices.
    http://www.atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
    Then you can decide what works for you.
    The answers are in the details so please post more details in follow up.
    Thanks.
    ATR

  • X-Fi Titanium and Blu-Screen (Win XP)

    %[ Hi ti all, i am a new user and, of course, i have my first big problem with creative drivers/software.
    Before installation of audio card all worked greatly but after i get a blu screen at shut down or at reboot (is the same).
    I used the latest version of the drivers available on the web (2.7.0006).
    I removed audio card and drivers and all works greatly, too.
    I reinstalled audio card + drivers and blu screen at shut down/reboot appears again.
    Anyone knows the solution.
    Audio card works correctly but with this blue screen ?the creative console don't save any settings, so every time
    i turn on the pc i have to configure it (effect, mixer, number of speakers, mic amplifiers, etc. etc.).
    Please help me.
    This is my configuration:
    Cpu Intel Core i7 920
    M/b Asus P6T (bios 0603)
    Ram 6 Gb DDR3 (3x2Gb DDR3 Corsair) ('cause i have Vista64 on another partition)
    ATI Radeon HD4890 Gb?
    HD Seagate 500 Gb
    Thanks in advance.

    Anyone?Message Edited by Rayman968 on 08-0-2009 2:47 PM

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • Dmp file and blue screen error Windows 7

    Hi,
    Just wondering if someone can tell me how to read the dmp file created after the blue screen appears ?
    I have just recently upgraded my Toshiba P300 from Vista 64 bit to Windows 7 Home Prem 64 bit. 
    I dont know why Windows 7 keeps crashing and so far I have no idea of how to open the .dmp
    file (I have zipped the dmp file and attahced below).
    http://cid-7a99d6152c55359c.skydrive.live.com/self.aspx/.Public/minidump/022710-26223-01.zip
    The message that I been given so far says :
    Problem signature:
      Problem Event Name:                        BlueScreen
      OS Version:                                          6.1.7600.2.0.0.768.3
      Locale ID:                                             3081
      Additional information about the problem:
      BCCode:                                               a
      BCP1:                                                    FFFFF6FC40052000
      BCP2:                                                    0000000000000002
      BCP3:                                                    0000000000000000
      BCP4:                                                    FFFFF80002E62322
      OS Version:                                          6_1_7600
      Service Pack:                                       0_0
      Product:                                               768_1
      Files that help describe the problem:
      C:\Windows\Minidump\022710-26223-01.dmp
      C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xml

    I have try step 1 and didnt boot up the window normaly...same thing happened
    Window 7 is loading...then boom the screen failed and blue screen appear...
    there is the latet crash report
    Version=1
    EventType=BlueScreen
    EventTime=129810543666556864
    ReportType=4
    Consent=1
    ReportIdentifier=9fb6a978-99f3-11e1-9b67-fa9a72be4846
    IntegratorReportIdentifier=050912-14508-01
    Response.type=4
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.1
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=3084
    UI[2]=C:\Windows\system32\wer.dll
    UI[3]=Windows has recovered from an unexpected shutdown
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=&Check for solution
    UI[6]=&Check later
    UI[7]=Cancel
    UI[8]=Windows has recovered from an unexpected shutdown
    UI[9]=A problem caused Windows to stop working correctly.  Windows will notify you if a solution is available.
    UI[10]=Close
    Sec[0].Key=BCCode
    Sec[0].Value=a
    Sec[1].Key=BCP1
    Sec[1].Value=0000000000000000
    Sec[2].Key=BCP2
    Sec[2].Value=0000000000000002
    Sec[3].Key=BCP3
    Sec[3].Value=0000000000000001
    Sec[4].Key=BCP4
    Sec[4].Value=FFFFF8000308BB7E
    Sec[5].Key=OS Version
    Sec[5].Value=6_1_7601
    Sec[6].Key=Service Pack
    Sec[6].Value=1_0
    Sec[7].Key=Product
    Sec[7].Value=256_1
    File[0].CabName=050912-14508-01.dmp
    File[0].Path=050912-14508-01.dmp
    File[0].Flags=589826
    File[0].Type=2
    File[0].Original.Path=C:\Windows\Minidump\050912-14508-01.dmp
    File[1].CabName=sysdata.xml
    File[1].Path=WER-27253-0.sysdata.xml
    File[1].Flags=589826
    File[1].Type=5
    File[1].Original.Path=C:\Users\Moz\AppData\Local\Temp\WER-27253-0.sysdata.xml
    File[2].CabName=Report.cab
    File[2].Path=Report.cab
    File[2].Flags=196608
    File[2].Type=7
    File[2].Original.Path=Report.cab
    FriendlyEventName=Shut down unexpectedly
    ConsentKey=BlueScreen
    AppName=Windows
    AppPath=C:\Windows\System32\WerFault.exe
    ive also have got a AI SUITE II crash...
    Version=1
    EventType=APPCRASH
    EventTime=129809041249476693
    ReportType=2
    Consent=1
    UploadTime=129809041250516752
    ReportIdentifier=ddea075d-9895-11e1-9a9f-eb38eba38a41
    IntegratorReportIdentifier=ddea075c-9895-11e1-9a9f-eb38eba38a41
    WOW64=1
    Response.BucketId=2555721005
    Response.BucketTable=1
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=AI Suite II.exe
    Sig[1].Name=Application Version
    Sig[1].Value=1.0.0.40
    Sig[2].Name=Application Timestamp
    Sig[2].Value=00000000
    Sig[3].Name=Fault Module Name
    Sig[3].Value=KERNELBASE.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=6.1.7601.17651
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=4e211319
    Sig[6].Name=Exception Code
    Sig[6].Value=0eedfade
    Sig[7].Name=Exception Offset
    Sig[7].Value=0000b9bc
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.1
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=3084
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=0a9e
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=0a9e
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
    UI[2]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
    UI[3]=AI Suite II has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
    LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
    LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
    LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\syswow64\WINTRUST.DLL
    LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
    LoadedModule[6]=C:\Windows\syswow64\CRYPT32.dll
    LoadedModule[7]=C:\Windows\syswow64\MSASN1.dll
    LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll
    LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll
    LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
    LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
    LoadedModule[12]=C:\Windows\syswow64\ADVAPI32.DLL
    LoadedModule[13]=C:\Windows\system32\VERSION.DLL
    LoadedModule[14]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\COMCTL32.DLL
    LoadedModule[15]=C:\Windows\syswow64\GDI32.dll
    LoadedModule[16]=C:\Windows\syswow64\USER32.dll
    LoadedModule[17]=C:\Windows\syswow64\LPK.dll
    LoadedModule[18]=C:\Windows\syswow64\USP10.dll
    LoadedModule[19]=C:\Windows\system32\MSIMG32.DLL
    LoadedModule[20]=C:\Windows\syswow64\SHELL32.DLL
    LoadedModule[21]=C:\Windows\syswow64\SHLWAPI.dll
    LoadedModule[22]=C:\Windows\syswow64\OLE32.DLL
    LoadedModule[23]=C:\Windows\syswow64\OLEAUT32.DLL
    LoadedModule[24]=C:\Windows\system32\IMM32.DLL
    LoadedModule[25]=C:\Windows\syswow64\MSCTF.dll
    LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
    LoadedModule[27]=C:\Windows\system32\rsaenh.dll
    LoadedModule[28]=C:\Windows\syswow64\imagehlp.dll
    LoadedModule[29]=C:\Windows\system32\ncrypt.dll
    LoadedModule[30]=C:\Windows\system32\bcrypt.dll
    LoadedModule[31]=C:\Windows\SysWOW64\bcryptprimitives.dll
    LoadedModule[32]=C:\Program Files (x86)\ASUS\AI Suite II\AsMultiLang.dll
    LoadedModule[33]=C:\Windows\system32\WINSPOOL.DRV
    LoadedModule[34]=C:\Program Files (x86)\ASUS\AI Suite II\ImageHelper.dll
    LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.17514_none_72d18a4386696c80\gdiplus.dll
    LoadedModule[36]=C:\Windows\system32\USERENV.dll
    LoadedModule[37]=C:\Windows\system32\profapi.dll
    LoadedModule[38]=C:\Windows\system32\GPAPI.dll
    LoadedModule[39]=C:\Windows\system32\cryptnet.dll
    LoadedModule[40]=C:\Windows\syswow64\WLDAP32.dll
    LoadedModule[41]=C:\Windows\system32\SensApi.dll
    LoadedModule[42]=C:\Windows\system32\Cabinet.dll
    LoadedModule[43]=C:\Windows\system32\DEVRTL.dll
    LoadedModule[44]=C:\Windows\system32\WindowsCodecs.dll
    LoadedModule[45]=C:\Windows\system32\WINHTTP.dll
    LoadedModule[46]=C:\Windows\system32\webio.dll
    LoadedModule[47]=C:\Windows\syswow64\WS2_32.dll
    LoadedModule[48]=C:\Windows\syswow64\NSI.dll
    LoadedModule[49]=C:\Windows\system32\credssp.dll
    LoadedModule[50]=C:\Windows\syswow64\mswsock.dll
    LoadedModule[51]=\\.\globalroot\systemroot\syswow64\mswsock.dll
    LoadedModule[52]=C:\Windows\syswow64\WININET.dll
    LoadedModule[53]=C:\Windows\syswow64\Normaliz.dll
    LoadedModule[54]=C:\Windows\syswow64\iertutil.dll
    LoadedModule[55]=C:\Windows\syswow64\urlmon.dll
    LoadedModule[56]=C:\Windows\system32\Secur32.dll
    LoadedModule[57]=C:\Windows\System32\wshtcpip.dll
    LoadedModule[58]=C:\Windows\System32\wship6.dll
    LoadedModule[59]=C:\Windows\system32\IPHLPAPI.DLL
    LoadedModule[60]=C:\Windows\system32\WINNSI.DLL
    LoadedModule[61]=C:\Windows\system32\dhcpcsvc6.DLL
    LoadedModule[62]=C:\Windows\system32\dhcpcsvc.DLL
    LoadedModule[63]=C:\Windows\syswow64\CFGMGR32.dll
    LoadedModule[64]=C:\Windows\system32\uxtheme.dll
    LoadedModule[65]=C:\Windows\system32\DNSAPI.dll
    LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
    LoadedModule[67]=C:\Windows\system32\rasadhlp.dll
    LoadedModule[68]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[69]=C:\Program Files (x86)\ASUS\AI Suite II\AssistFunc.dll
    LoadedModule[70]=C:\Windows\system32\PROPSYS.dll
    LoadedModule[71]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
    LoadedModule[72]=C:\Windows\system32\apphelp.dll
    LoadedModule[73]=C:\Windows\syswow64\CLBCatQ.DLL
    LoadedModule[74]=C:\Windows\system32\wpdshext.dll
    LoadedModule[75]=C:\Windows\system32\WINMM.dll
    LoadedModule[76]=C:\Windows\System32\shdocvw.dll
    LoadedModule[77]=C:\Windows\SysWOW64\ieframe.dll
    LoadedModule[78]=C:\Windows\syswow64\PSAPI.DLL
    LoadedModule[79]=C:\Windows\SysWOW64\OLEACC.dll
    LoadedModule[80]=C:\Windows\syswow64\SETUPAPI.dll
    LoadedModule[81]=C:\Windows\syswow64\DEVOBJ.dll
    LoadedModule[82]=C:\Windows\system32\ntmarta.dll
    LoadedModule[83]=C:\Program Files (x86)\ASUS\AI Suite II\pngio.dll
    LoadedModule[84]=C:\Program Files (x86)\ASUS\AI Suite II\AsAcpi.dll
    LoadedModule[85]=C:\Program Files (x86)\ASUS\AI Suite II\asacpiEx.dll
    LoadedModule[86]=C:\Windows\system32\RpcRtRemote.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    State[1].Key=DataRequest
    State[1].Value=Bucket=-1739246291/nBucketTable=1/nResponse=1/n
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=AI Suite II
    AppPath=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe

  • After updating my ipad mini retina to 8.1.2, my device experiences blue screen of death at random times.

    After updating my ipad mini retina to 8.1.2, my device experiences blue screen of death at random times. It is so annoying plus there are applications that keeps on crashing such as brother in arms by gameloft so i have no choice but to reinstall it all over again.. But after quite some time the apps will crash again.. Argh it's a cycle. so annoying..

    Hi  It sounds like a bug. Go to settings iCloud backup over your WiFi Then Restore back to Factory Settings. After Restore use same Apple ID then you will get all your apps & data back. Do Restore over your WiFi. Since ios 7 Almost everything can be done over WiFi you don't need to use your PC. Cheers Brian

  • Can Motion 5 replace a green screen and blue screen in the same shot?

    Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.

    Fox gives a good example for keying green & blue (or any other color)  from the same shot. I'd suggest doing a few things to get better accuracy.
    First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness.  It also will remove spill based on this color.  Looking at Fox's example movie and the shot, I'd approach the same shot this way:
    Remove the Blue
    1. Apply the keyer and set the strength to zero.
    2. Use the Sample Color tool and select the blue (or other color) to be removed.
    3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
    4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune.  Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
    Remove Green
    It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
    With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend  having the Color Selection open so you can see the graphs.  These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools.  Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change  more than the tolerance selection.  Observing what is happening in these graphs will help you figure out wha to change and speed things up.

  • Cropping and Blue Screening - 2 unrelated questions.

    1) When I straighten a still in Canvas by using the wire frame, to make a house level, say, the cropping lines, naturally, move with it. So a cropping line at an angle will give me a slanting top and bottom line. So how can I crop it so that the picture has a square aspect? Is the only recourse to go back to the original site for the picture, GIMP or iPhoto, perhaps, crop it there and re-import the photo into FCE? Or is there a quicker way?
    2) I have added a number of videos above my main video to show, for example, falling snow, and eliminated their black background by Modify - Composite Mode - Screen. Very easy and by no means unusual. So, my question, is, why all the fuss about green and blue screening? Setting it up seems troublesome. A black background for the purpose is much easier to make, and, for that matter, easier to find. I looked down my back yard this morning and this side of the creek are jet black bushes which would seem ideal for such a purpose. This seems such a no-brainer that I think I must be missing something. But it is curious.
    Allosaurus

    1) I shall immediately turn to the garbage matte section in your book - I'm sure I remember seeing one - and work it out from there. And here I always thought a garbage matte was that rug I bought in Cairo.
    2) A black screen. That does give me a thought. When I return to my upcoming masterpiece, " "Orrible Murder at the Castle Doom" I could put one of my granddaughters in a black suit, photograph her against a black background and Voila! a floating head. I wonder if they give out Oscars for original ideas?
    Once more. Thank you.
    Allosaurus

  • Blank Black Screen And Blue Screen. Do I Need To Do Reflow To Ati Chipset?

    Hello i want to tell you my problems and what i did until now.
    I have hp pavilion dv3 4150st. I was using win7 64 bit . and i was geting an error that says "display driver amd driver stopped responding and has successfully recovered".I started to get this eror often . And a few days later  my pc startet to get blue screen errcor after a few second later than display driver error. . And  after 2-3 blue screen error i lost my screen. It was blank black . when i restart pc the screen was blank black. there was no image. When i started to fix another monitor, i saw screen . And i installed the win 7 with another external monitor. Bu i had still black screen after install the windows.. Itand  was still black after i remove the ectgernal monitor. I installed bios again but i had still black screen. And i tried the install ati display driver after installing windows . But after i installed the display driver, i had the blue screen error again. And now i have still both blank black screen and blue screen problem. 
    I cleaned the motherboard. I resetted bios. I installed bios. i installed windows again. i installed ati display driver.But these couldnt solve the problems. Please can you tell me what can i do now ?

    Hi beginner_2012,
    Thank you for your post, I will do my best to assist you.
    I grasp that you were getting the error "display driver amd driver stopped responding and has successfully recovered" quite often.  Then a  few days later you got the blue screen then the above error message, after 2 -3 more errors the screen is now blank or black. Here is a document to assist you with this.  Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • My ipnone 5s keeps crashing and blue screening any advice

    My ipnone 5s keeps crashing and blue screening any advice

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

    grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think  it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
    Thanks for any help!

    You have to take the computer to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • When I attempted to open the Devices and Printers screen in the Control Panel, I get a blank screen.

    My Devices and Printers screen in the Control Panel just shows a blank screen

    <moved from Adobe Creative Cloud to Bridge General Discussion>

  • Encore CS4 Missing Frames/Stops Starts  and Blue Screen Crashes During Playback

    I'm opening Premiere Pro CS4 with the default presets of HDV Capture, HDV 1080i30 software only mode. I'm capturing from my Canon HV20 using firewire HDV out 1440 x 1080. All goes well during the editing process but when I Dynamic Link and playback in Encore CS4 I observe dropped frames or stop and starts in Encore timeline sequence. At times I may even crash Encore with a Blue Screen. While still running Encore I can go back to Premiere Pro and play the timeline sequence with no issues. I will mention that I have the Matrox RT.X2 installed. But when starting a project I'm doing software only and disabling RT.X2 hardware playback. If I remove all effects in the timeline sequence and then Dynamic link to Encore the playback is normal with no effects. I did exported the Premiere Pro CS4 project using Adobe Media Encoder CS4 with a setting of MPEG 2 Blu-ray 1440 x 1080i 29.97 High Quality. I than import this MPEG2 back into Adobe Encore CS4 and it plays without dropping frames or hang-ups.
    Build
    Case: Coolmaster-830
    Op System: Vista Ultima 64 Bit
    Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
    Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
    Performed updates on all Adobe Production Premium Products as of 01/12/2009
    Matrox RTX2 4.0 Tools
    Main Display: Dell 3007 30"
    DVI Monitor: Dell 2408WFP 24"
    MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
    Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
    PS: Corsair|CMPSU-1000HX 1000W
    CPU: INTEL Quad Core Q9650 3G
    MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
    1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
    Cache SATA 3.0Gb/s
    2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

    Try to remember this:
    Encore "Tries" to playback from premiere pro.  If you have a full set of previews available, it will play those, but you are probably seeing a lot of dropped frames and choppy video if your previews in premiere are set pretty low.  What you can do to combat this--in my experience--is export your video from premiere into a whole file in full format (in a non-lossy format with full frames, and in it's proxy equivalent;  I use Prores LT for many projects, and export that as a final output from premiere), then have that encode in an h.264 format (which will maximize smooth motion and quality playback).  Now... ...In your encore project, you should be outside of your original formats and in the intermediary that encore will recognize, so you should have it "Locate transcoded file".  Once you have done so, it will playback that movie in the preview.  I've done it.  With CS6 and 4gb ram with a vidcard at 256mb and a core2duo 2.16ghz, it plays fine.  With CS4 the encoding takes a while, and if you go to dvd, even longer for compression to work properly.  I use Compressor to output AVCHD .264 stream and an AC3 file.  When I locate the transcode for BD, I locate the .264 file first, then I get asked for the AC3 file.  This allows me to import them both, and have Encore encode them into the transport stream without transcoding.  I use Distributed processing to get the job done quickly, as I have minimal access to several computers and have connected them by that method for a Render Farming setup.  It works well.  With a hardware based device playing back your files, you won't see the same performance in Encore.  It has to make two hops already to get to your video, and adding a third (goes from encore to Premiere, then to codec, then plays normally;  third step is to external hardware, which eats up processing like crazy when it has to come all the way back to an encoding output to screen through encore, adding more steps for the system along the way) really can slow down the performance in Encore.  IF you take the Steps out by encoding a finished playback stream, Encore will handle it quickly with it's own processing.  It really does work well.  If you don't like it, make your changes in Premiere, then re-encode with your hardware and make an h.264 file for encore again.  You can use AME, but you'll always get standard Blu-ray (old file-stream format; lesser res and quality).  You can use Compressor to make AVCHD which allows for 264 output that is PSF or progressive that is interpreted as simultaneous fields (fake interlace), or even solid progressive formatting for AVCHD compatible players, and you can render-farm it to speed up the encoding process.

  • Blackberry Desktop Software (Roxio, specifical​ly) causes network problems and blue screens.

    I'm posting this note because I just solved my network issue/crash problems. I started experiencing lots of disconnects and page not found on my office computer over the past few days. Only thing I could think of that was different lately was that I installed the Blackberry Desktop Software. Then a huge lightbulb went on over my head. I remembered when it was installing, it said it was installing "Roxio" software and at that moment shivers went down my spine from past experiences.
         Well, I have lots of good "bad" experiences with Roxio CD software which had caused these same problems on two of my home computers. It caused blue screens when used in conjunction with my wireless Netgear card and also standard network card. The same symptoms including very slow internet access, general machine sluggishness, etc. I was trying to chase this down for months til I finally removed the Roxio crapware and ALL problems went away. No more slow machine, no more page not found and no more blue screens on two of my computers. Now, on a completely different Toshiba work laptop and different network adaptor, same problems.
         So, here we are again with Roxio as part of Blackberry Desktop software. I like my new Blackberrry 8830, but I have to pass this along to the Blackberry folks because I KNOW I'M RIGHT about this. I only installed the software so that I could type my contacts into Outlook and then download to my Blackberry. So, after realizing the common symptoms and after having completed my download (which worked great by the way), I removed the Blackberry Desktop Software and I'm back to speedy everything, no more pages not found, no more putty disconnects, and no more blue screens.
         I hope someone gets good use of this post because this drove me crazy the first time around.
    -- Jeff

    We had the same problem.
    We did extensive troubleshooting, and found the problem was effecting our new HP Windows XP .Laptops.
    We did not have any trouble with the Older Dell Latitude we have.
    We found the BSOD still happened after removing the Black Berry Desktop Manager Software.
    We traced it to a memroy / resource leak in the USB subsystem.
    The workaround we found is to go into the Device manager, and remove all the drivers from the USB section.
    ** Disclaimer :  This works for us, but may make your computer unusable.  Backup your data to external storage.
                   Back up your computer
                   Start -> control Panel -> system ->Hardware tab ->  Device manager.
                    Expand "Universal Serial Bus Controller"  at bottom of list.
                    Right click on each Item, and select "uninstall"
                    Don't reboot after each one.
                    * Remove ALL the entries under Universal Serial Bus Controllers *
                    Repeat until all the entries under  "Universe Serial Bus Controller" are removed
                    (there may be one that sticks, thats ok. so long as it has been uninstalled.
                Reboot.
                The OS will rebuild the USB stack and drivers to default.
    This has worked for us so far.
    We are not sure if this wont break something else.

Maybe you are looking for

  • Updating the table is taking long time

    I have one table Solution, in that in one java application P, 1) i am inserting a new record by passing values to a oracle procedure A. 2) And in the same application i am updating the same record by calling one oracle function B. Now in another java

  • HT4889 After migrating Safari will not open up. It's coming back with "Safari quit unexpectedly".

    Just purchased a new MBA, I'm trying to migrate my files from my MBP to my MBA using the Apple Cap. Safari is coming up with an error and will not open. The message from Safari is stating: Safari quit unexpectedly. I'm running MAC OS X 10.7.4 on my b

  • Oracle Sql Query issue Running on Different DB Version

    Hello All, I have come into situation where we are pruning sql queries on different DB version of Oracle and have performance issue. Let me tell you in brief and i really appreciate for your prompt response as its very imperative stuff. I have a quer

  • RFC Error in SM58 Commit fault

    My scenario is RFC to XI to FILE. I made RFC destination in SM59 and configure xi according to /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step The connection test in SM59 is succeeded. I would like to execute

  • Third party apps not working

    so looks like my friends that have updated to 3.1.3 are having issues with launching their third party apps is there a way to fix this, i also have one but waiting on to see if apple can clarify if there is a problem before i update mine.