Contact center script menu on hold music

I have a script that is working. I have a menu and they want a music on hold to play while the menu goes through its retry. How do I get music on hold in between the retries?

They want to hear a prompt and after the prompt plays be able to input a digit to be routed to vm. If they dont input a digit the run the prompt two more times and then go to vm. They want hold music in between the prompts. I am running the menu prompt in the script but it gives out silence in between prompts.

Similar Messages

Contact Center script question

Hello,
I have a script for a call center application which has different menus and submenus including CSQs in some branches of the menus, I configured everything and all is fine.
the customer came up with a new requirement which is when a caller reaches an agent by mistake as the caller should be handled by a different CSQ, the customer wants this agent to be able to transfer the caller to the correct CSQ directly and NOT to the start of the script (by transferring to the application pilot number) and also NOT to an agent directly he want him to transfer the caller to the correct CSQ.
and i have 12 CSQs in my script and if i divided the script to small different scripts and applications each with different call-in number to which the agent can transfer, this is going to be a big hassle and will have at least around 13 scripts and applications with many call redirect steps.
so I believe there should be some steps to be inserted inside the script to enable an agent having a call to return this call to a selective CSQ, so Kindly advise.

Your best bet is to have different transfer numbers for each CSQ/script. If not, then have the angents update a variable for the call before they transfer it to the pilot number. Then in your script check the variable and sent it to the correct CSQ based on the agent entry.
david

Contact Center Script for AgentExtension

Hi,
I need a script that returns Agent extension of an already logged-in agents.. (I mean that I need to know if a specific agent is already logged in or not)
is it possible?..
thx in advance

You can get an Agents current state using the "Get Reporting Statistic"
Report Object = Resource IPCC Express
Field = State
Row Identifier = AgentID
Result Statistic = (Result in a string variable)
You must know the agents ID in order to get the status.
From memory the status is pretty basic. "Not Ready" means they can't accept a call from the CSQ. You can't tell why they are "Not Ready"
If you are looking for someone in the team you would have to have a list of agents in an XML file or a database. You would then have to loop through the list.
One you have a Agent ID you can get an extension via the "Get User Info" step.
Graham

Contact Center query

Dear Gents,
I have a question regarding contact center, let’s start with the existing scenario:
There is a simple contact center script with multiple menu options for the caller to choose one of them let’s say, 1 ènew subscription, 2 è complains, ….etc. suppose the following happens, a caller who need new subscription chose option number 2 (complains) and directed to a complains agent and this agent addressed this caller needs.
The problem is this call will be recorded in the CCX reports as option 2 (complains) call although it was actually a new registration (option 1) which will be misleading in the CCX reports.
So briefly the customer needs something to be configured to facilitate the agents to indicate that the previous call was belonging to another submenu (option) after he finished talking with the caller in order to give accurate statistics in the CCX reports
So please could you tell me how this can be implemented.

You can setup additional trigger number the agent can transfer the call to internally and inside the script send the call directly to respective queue bypassing the initial menu in this case u can get reporting based on this trigger and queue
Sent from Cisco Technical Support iPhone App

Hi I was using whatsapp on my iPhone5.I was not able go to the main menu by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black

I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?

Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy

Download all UCCX scripts from Contact Center

Hey all,
I'm faced w/ a particular problem that I haven't been able to solve yet: I'm trying to download all the scripts that live on our UCCX server to create a backup. In the past, when our Contact Center was windows-based (pre-8), I would just navigate to the AVVID folder and grab them, but now we're on the application model (8.5.1SU1) and I don't see a corollary to that here.
Is there any way to download all the Scripts at one time, instead of going script by script and hitting download?
Much appreciated. Thanks guys!
Kyler
Fort Collins, CO

Amre,
I was never able to get to this before leaving my position.
I very much suspect a full export of the tar file will contain an unencrypted copy of the scripts and all associated files, but I'm not certain.
Good luck!
kyler

Ask the Expert: Cisco Unified Contact Center Express (UCCX) Version 10.0 - Upgrade, Migration, and New Features Overview

With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati

Custom on Hold music problem

Good Afternoon,
Attempting to add custom on hold music to our UC540.
I received the on hold file as a .wav so I converted it to a .au format as that appears to be the preferred file type for Cisco's on hold music.
When I listen to the file after conversion, in Windows Media Player the file sounds perfect, but once I add it to the UC540 and set it as the desired file I get nothing but static when placing a call on hold.
I can't figure out where the problem is because when you test the audio file before importing it using CCA it plays fine with no distortion or static.
Any help is appreciated.
Thanks,
Corey

You can't use just any audio format. Windows media player doesn't care how your .wav file was produced, but Cisco does.
To install a new audio prompt on Call Manager:
Media file must be encoded as a 16-bit wideband PCM wav file.
Messages on Contact Center (UCCX) have a different format.
Media file must be encoded as a CCITT uLaw 8-bit 8 KHz Mono PCM wav file to be compliant with G711 codec. Use aLaw in Europe and Australia.

What is the best way to set up direct to agent calling in Contact Center Enterprise?

I have a need to route to agents from a menu choice or extension. We use an extension and a seperate agent login for our associates. I need to keep the call visible to Contact Center for reporting but it must route to the users Voicemail extension if the Agent is not available. There could be up to 20 of these in a sales unit that have to be setup. I am doing the first now and want to set it up the best way from the start. any suggestions?

There are a few ways to go about this.
Say, for example, that your agents have the following on their phone:
ACD line (no voicemail), same as Agent Peripheral ID
Personal line (with voicemail)
In my environment, we have a *XXXXXX pattern set up in CUCM which will go directly to the voicemail box of extension XXXXXX.
In my extension entry script, I use a Queue to Agent node with indirect agent reference. The caller inputs the Agent's ACD number, and if the Agent is available it delivers directly to them. You could of course continue queuing with messaging at this point, but in my case I follow up the Queue node with a Label that concatenates * to the number the caller entered. In Unity, I have configured the personal voicemail boxes with Alternate Extensions equal to the ACD line numbers.
Here's an example flow:
Caller enters ACD 801234 at prompt
Queue to Agent node queues to 801234
Agent not available, so Label node returns *801234
*801234 gets sent to CUCM (in my case through CVP). CUCM sends 801234 to Unity
Unity matches 801234 on Alternate Extension of 805678 personal line
Caller hears voicemail prompts for 805678
The important part of this design in my opinion is the direct-to-voicemail pattern (*XXXXXX in my example). You wouldn't want to overflow calls to a non-ACD number that actually rings the Agent's phone, as there is then the potential for calls with poor reporting. Getting to the right voicemail box can be done with Alternate Extensions as above, or you could keep a database table of AgentID-Extension matches and use the DB Lookup node in ICM.
-Jameson

Ask the Expert: Deployment and Troubleshooting Cisco Unified Contact Center Express (UCCX) Deployments

With Anirudh Ramachandran and Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the latest advancements in Cisco UCCX (such as the integration of Cisco Social Miner to provide agent chat and better reporting using the Cisco Unified Intelligence Center), as well as the existing features of Historical Reporting, custom reporting using the historical database, Agent Email services, JTAPI integration with CUCM, and the HA over WAN cluster mechanism.
Anirudh Ramachandran is a customer support engineer at the Cisco Backbone Technical Assistance Center in Bangalore, India. Working in the Asia-Pacific time zone for the last two years, he focuses on Cisco Unified Contact Center Express issues and specializes in Linux, JTAPI/CTI integration, and UCCX system and database issues. He holds the CCNP Voice and UCCX Specialist certifications, and is also a Red Hat Certified Engineer. Anirudh writes tools and automates bug workarounds for UCCX in addition to working on TAC service requests, and currently has authored and co-authored seven such tools. Anirudh graduated from the National Institute of Technology Karnataka with a Bachelor of Technology in Computer Engineering.
Abhiram Kramadhati is an engineer with the Contact Center Backbone team in the Asia Pacific timezone. He has been working with UCCX since he started with Cisco 2 years ago. During his time at Cisco, he has built his expertise around UCCX Telephony applications, JTAPI integration, UCCX system behaviour, LDAP components and also UCCX as IPIVR in UCCE environments. He also works on other technologies including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the region. Abhiram is a Telecommunications engineer from Bangalore, India.
Remember to use the rating system to let Anirudh and Abhiram know if you have received an adequate response.
They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video Contact Center subcommunity discussion forum shortly after the event. This event lasts through May 3, 2013. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Anthony,
Thanks for the question.
This is an interesting requirement, since the UCCX trigger's configuration is translated only to the Call Forward Busy External setting on the CUCM.
Trigger creation:
144768: Apr 22 21:54:23.789 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet.updateNewTrigger() - Creating a new Trigger :1234
144876: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet routePoint = 1234
144877: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet description = testt
144878: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet deviceName = testt
144879: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePool = {1B1B9EB6-7803-11D3-BDF0-00108302EAD1}
144880: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet devicePoolName = Default
144881: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpace =
144882: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet callingSearchSpaceName = None
144883: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet redirectCSS = default
144884: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet location = {29C5C1C4-8871-4D1E-8394-0B9181E8C54D}
144885: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet locationName = Hub_None
144886: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partition =
144887: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet partitionName = None
144888: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfile =
144889: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet voiceMailProfileName = None
144890: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyVM =
144891: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyDestination =
144892: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSS =
144893: Apr 22 21:54:23.884 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerServlet forwardBusyCSSName = None
144953: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: try makeRequest() on AXL: 10.106.113.142, AXLUser: axl, AXLPassword: XXXXXX
144954: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:CCMVersionSOAPAdmin.getAXLVersion():7.1
144955: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - Start REQUEST ====================
144956: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 440
http://schemas.xmlsoap.org/soap/envelope/">MADM_5691234CRS Line descriptionCallPark
144957: Apr 22 21:54:23.913 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: makeRequest() - End REQUEST ==================
144958: Apr 22 21:54:23.914 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-569.CCMLineSOAPAdmin: getSocket: MADM_LIB_AXL_AXL_SOCKET_POOL-0-79[TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=10.106.113.142,port=8443,localport=44913]]
144987: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - Start REQUEST ====================
144988: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:POST /axl/ HTTP/1.1
Connection: keep-alive
Host: 10.106.113.142:8443
Authorization: Basic YXhsOmF4bA==
SOAPAction: "CUCM:DB ver=7.1"
Accept: text/*
Content-type: text/xml; charset="utf-8"
Cache-Control: no-cache
Pragma: no-cache
Content-length: 839
http://schemas.xmlsoap.org/soap/envelope/">MADM_570testttesttCTI Route PointCTI Route PointCTI Route PointSCCPUserRing1000010000
144989: Apr 22 21:54:24.195 IST %MADM-LIB_AXL-7-UNK:AXL-ExecutionCmd-570.CCMCTIRoutePointSOAPAdmin: makeRequest() - End REQUEST ==================
145014: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - CTI RP created.
145015: Apr 22 21:54:24.647 IST %MADM-ADM_CFG-7-UNK:JTAPITriggerUtil.createRPAndLineOnCCM() - Created a Route Point = 1234
As you would aready know, the UCCX will send an AXL request (within the SOAP envelope) to the CUCM to create this RP. Looking at the existing code, there does not seem to be a method where we are differentiating between CFB_internal and CFB_external while sending this request.
We have taken this as an enhancement request and also spoken to the business unit about the same. It has been added to the roadmap, we will reach out to you offline to understand the business case so that the process can be expedited if needed.
Keep the questions coming
Cheers,
Abhiram Kramadhati

Cleaning the Script Menu in Photoshop

Is there a way to clean the script menu in Photoshop? I'm launching most of my scripts from shortcuts on my Wacom Tablet and from Windows Explorer, and everytime I do one of those two options, since I'm not launching the script from the script menu, it adds a copy of the script name to the menu, thinking it's a new script. Is there a way to clean that menu, to tell it to show only the scripts in the scripts file and not every single script I launch from Windows Explorer or shortcuts?
Because now I can't use the script menu anymore because there are too many things. Every script is the at least 10 times and the list is now twice as long as my screen.

Scripts edited in ESTK and run with ESTK as the target app stay in ESTK until
you restart ESTK. The JS interpreter is ESTK is persistent across script
invocations. Bridge operates the same way, unless you #target different
interpreters.
In PS, if you have a script in Presets/Scripts and start PS, it will stay in the
File->Scripts menu until you restart PS. It will stay in the menu even if you
delete the file from disk but will not execute if it is selected. The JS
interpreter is PS recreated for each new script invocation.
On situation in which two scripts with the same name can occur in the Script
menu is if you have two scripts with the same name in two different folders
under the Presets/Scripts folder.
One other possibility (that I haven't verified) in CS3 is if you have one script
in app.path + '/Presets/Scripts' (the 'normal' scripts folder) and another in
Folder.userData + '/Adobe/Adobe Photoshop CS3/Presets/Scripts'. This Presets
folder is where user-specific mods to Presets tree should be located. I have
scripts that have to run as far back as CS so I haven't had to worry about this yet.
-X
for photoshop scripting solutions of all sorts
contact: [email protected]

Contact Center - timers agents

Hi,
I have been assigned by my company to manage CUCM and UCCX. All this because I have a little background of Alcatel OXE systems. For the moment I am quit busy to learn how to handle those products but there is still a long way to go. So sorry for the "maybe" stupid question.
That being said, our people from the helpdesk who are all in the Contact Center are asking me the next thing to configure:
When the agents are taking a call and after a few minutes end that same call by hanging up, they are immediately free for a second call. That's something they want me to change. Because they have to fill in a ticket, they need some time before the next call come in. So they are asking me if there is a way to be "offline" or "still busy" for about 15 seconds.
Is this something easy to implement in UCCX? Or is this the wrong place to config this and should it be done in CUCM? I'm looking for timers, hunting groups but don't find what I am looking for. I think I'm looking at the wrong place.
For the RTFM people, I do read manuals and check very interesting video's on how to handle all this, but like I said; I'm just into it and the problem is that I don't have time credit on this one.
Many thanks for the help.
Kind regards,
Max

Gergely,
I found something else.
On the Cisco website we can read:
Wrapup Time
Determines if agents automatically enter Wrapup when a call ends.
Like you mentioned already.
From the Unified CCX Administration menu bar, choose Subsystems > RmCm > Agent Based Routing Settings. The Agent Based Routing Settings area opens.
When I go there, I don't have the wrapup option.
Then there is an interesting note:
The Agent Based Routing Settings are available only if you are using Unified CCX Enhanced or Premium license packages.
When I check the licenses on my system:
Configured Licenses:
Package: Cisco Unified CCX Standard
IVR Port(s): 150
Cisco Unified CCX Standard Seat(s): 10
Cisco Unified CCX Maximum Agents: 300
So my research ends here? As a beginner I should say yes. Or are there other ways to configure what is asked to me?
Kind regards,
Max

Call Counting Contact Center Express versus Enterprise Webview

I am working with one of my internal cutomers to count calls for several departments Main Numbers.
In Contact Center Enterprise and using Webview to look at Call Types I can count the call then all calls show as Flow Out.
In Express if I run the Application Summery Analysis report I get Call Count, Calls Abandoned and Average Abandoned time.
I thought that getting Calls Abandoned and Average Abandoned time was interesting.
Can anyone offer any insite as to why or how Express can determine Average Abandoned time if I am just sending the call to another phone number after running it through an application. I would think Enterprise would give me this as well. Enterprise can only do this if I run the call through a queue.
Thanks in advance for any insite.

Hi
Page 2-57 onwards of the HRC admin guide details how the report is calculated. http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/programming/guide/uccx85hradm.pdf
"For each application, calculate the sum of the values in CCD.connectTime
where the CCD.contactDispostion is 1 (abandoned), 4 (aborted), or 5 or greater
(rejected) to obtain the total abandon time to obtain the total abandon time."
According to the database schema (http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85dbschema.pdf) connectime is:
"Amount of time, in seconds, between the start time of the
call or the leg and the end time of the call or the leg."
The CCD table contains a single record for each call typically, whereas queue times and info would be in ContactQueueDetail (perhaps with multiple records if queued to more than one queue). Basically each contact has a contact disposition assigned, which might be handled if you have set this in your script, or might be another code - it would be worth checking what this is, it might default to abandoned if you don't set it otherwise. If that's the case then you might see a misleading average abandon (i.e. calls showing as abandoned that were succesfully transferred).
Aaron

Contact center data

Hello all
i want that agents to see which number the customer dialed before or with which agent he talked to ? i want to make database integration.Agents must see these data on the agent desktop explorer.How can i grab that data from contact center ? By default what kind of database ccx use ? For example someone talked to one agent and he called again,the new agent must see data abaut him before.
thank you

Hi
All the historical data is written to a database called db_cra that is replicated between the UCCX servers. The DB definition is here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/user/guide/uccx70dbschema.pdf
You would have to look into this database, find a previous call from that customer (identified by calling number, or account number if you have scripts that store that sort of information) which would be in the 'ContactCallDetail' table, find the agent (in the 'Resource' table) that handled the call by checking the 'AgentConnectionDetail' table.
This example would retrieve the last 10 calls made from cust with the account number 1234999001 but you could easily change it to match the calling number in the CCD table.
select top 10
ccd.startdatetime,
ccd.applicationname,
ccd.customvariable1,
acd.callwrapupdata,
CASE disposition
WHEN 1 THEN 'Abandoned'
WHEN 2 THEN 'Answered'
WHEN 3 THEN 'Dequeued'
WHEN 4 THEN 'Handled by System'
WHEN 5 THEN 'Sent to another queue'
ELSE 'Unknown'
END as disposition
from db_cra.dbo.contactcalldetail AS ccd
LEFT OUTER join agentconnectiondetail AS acd
on (ccd.sessionid = acd.sessionid and ccd.sessionseqnum = acd.sessionseqnum)
LEFT OUTER join contactqueuedetail AS cqd
on (ccd.sessionid = cqd.sessionid and ccd.sessionseqnum = cqd.sessionseqnum)
where ccd.callerentereddigits=1234999001
order by ccd.startdatetime desc
Regards
Aaron
Please rate helpful posts...

5th Gen iPOD has white screen and beeps when center and menu button is held

My ipod was perfectly fine until I downloaded iPod Updater 2006-01-10...now, my ipod has a white screen, won't turn off (white screen stays on) and when I hold the center and menu button down, it does a 3 syllable beep. I've done the switching the hold button back and forth; resetting my ipod; restarting my PC; un-installing and re-installing both the itunes software and the ipod updater and still no working ipod. I am atleast trying to restore it to factory settings, but, I get an error message on the iPod updater screen. Can anyone help? Thanks!

everybody listen to babara hall, genius, it takes a while but reset it one more time using menu and selct and while its off for a few seconds push selct and play/pause, hold it for a long while, then let go and you'll see the apple logo and everything will go back to the way it was before.
p.s. thank you so much, ipods working great now, glad someone knows what there doing instead of apple,lol

Contact center script menu on hold music

Similar Messages

Maybe you are looking for