Contains Operations and Move Percentage
Hi,
I am newbei in ABAP programming and rather stuck in these Problem, while doing a exercise.
Can any one explain me, how can i do it.
Problem 1:
<u><b>Move Percentage</b></u>
Data mc1(10) TYPE c VALUE 'ABCDEFGHIJ'.
<b>Use MOVE cmd with PERCENTAGE addition to display</b> output ABCD left-aligned & right-aligned
Problem 2:
<u><b>Contains Operations</b></u>
Data test(50) type c value Today is a wonderful day.
<b>Check if it contains any numeric character</b>
Data num_var(6) type n value 12345.
<b>Check if it contains all numeric values</b>
Also, Can u explain me OVERLAY String operation with a example. I am a bit confused in understanding this Operation.
Thanks in Advance.
Samir
Hi Samir,
Try this..
Problem 1:
Data: mc1(10) TYPE c VALUE 'ABCDEFGHIJ',
mc2(10).
move mc1 to mc2 percentage 40 left.
write:/ mc1,mc2.
move mc1 to mc2 percentage 40 right.
write:/ mc1,mc2.
Problem 2:
Data: test(50) type c value Today is a wonderful day,
test2(10) value '1234567890'.
if test ca test2.
write:/ 'data contains a numeric character'.
endif.
Data: num_var(6) type n value 12345,
num(10) value '1234567890'.
if num_var co num.
write: / 'Only mumeric values'.
endif.
Example for OVERLAY:
DATA: WORK(20) VALUE 'Th t h s ch ng d.',
HELP(20) VALUE 'Grab a pattern'.
OVERLAY WORK WITH HELP.
WORK now contains 'That has changed.' and the system field SY-SUBRC is set to 0.
Regards,
Suresh Datti
Similar Messages
-
Alrt with field Lelvel Info - By using Container Operation and Control step
HI,
I have developed File to File scenario from /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
I created Integration Process in IR with two BPM steps Receive and Send step.
Since I need a filed level info on alerts...I have included Container Operation and Control steps in between receive and send like..
Receive --- Container Operation --- Control step -
Send
And now I have created the Alert category in Alrtcatdef and used the same category in control step.
I have tested the above scenario with error message ( with mapping fail )...But I am unable to find the alert in the system?!!
---SHI Stallin
Did alert generated by BPM itself. Check with BPM workflow.
Another thing while generating alert from BPM, standard alert element will not work with BPE engine. Create elements for the same
Thanks
Gaurav -
Container operations and abstract interfaces
Hi
At first, could somebody maybe refer to blogs about how to exploit fault messages in BPM? (how to generate an fault response when a exception is thrown and handled)
As I could not find a fast way to see how fault messages work in BPM I tried to solve the problem the other way... but run into a problem again. The question is: is it possible to assign values to some elements in an abstract interface type container? Like put into the message a processing code, processing time or some other informative text.
In a more technical way: container operation allows only the whole container to be the target of the operation, while one can use any part of an container (of abstract interface) to use as the source of operation. Is it also possible to assign a value to a element in abstract interface?
Waiting for any ideas...Hi
Thanks for Your answer. Still my question is unanswered. As You could read out from my question, I know that such a step exists but the problem is that target can be exactly one container. Its hard to make an example without too much of code samples.
I agree that if I have containers A and B then I can do:
A = B
But if A is of type abstract interface with structure:
rootNode
+ childNode1
+ anElement as xsd:string
+ childNode2
and B is a simple type then is it possible to do something like:
A:/rootNode/childNode1/anElement = B
As I don't want to change anything else in the response. Any ideas?
I need to do so because I am not able to throw fault messages as a synchronous interface response (first: there is no way to define fault type as abstract interface, second: send [close S/A bridge] step needs response message only).
Another way would be to replace response content by inserting fault information but as there is no way but message mappings (transformation step) to change the content of an abstract interface (is there?). It would be a very ugly solution - each fault in BPM shall have its own mapping that generates the whole message... and there would be other issues too.
Waiting for any ideas on how to solve the problem.
Any recomendations how to create a SOAP fault answer in BPM are also welcome! -
Files are not appended in the container operation step ?
Hi Guys,
I have a BPM scenario where i receive a single file with multiple transactions
1. Receive step receives the file and starts the process
2 Transformation Step - Splits the file into individual transactions
3. Block step --ForEach - Block has the follow 2 steps
1. Send - Synchronus - sends the request of each individual transaction to a 3rd party system and receives the response.
2. Container Operation: Appending all the responses into a single file.
Properties of container operation:
Target: Multiline element (Block level element)
Operation: Append
Expression: Single element similar to structure above with out multiline.
4. Send Step: I am writing this file locally to a file and this always shows only the last transaction in case of ParForEachMode and first transaction in the case of ForEach mode.
can anybody explain why the messages are not appending into a single file. any help would be really appreciated
Thanks,
SriniHi Liang,
Check to see if the Sync Send step send every reply messages it received to container operation step:
You might need to remove the container operation to see if you receive each individual msgs.
> I have removed the container operation and i am able to see all the individual responses which i basically written to file just to cross check and every thing looks fine.
Another way to go to workflow log (Complete Process with all the steps) to get debug information:
SXMB_MONI -> Click "PE" under outbound queue -> Press "Display WorkFlow Log" button -> Click List with technical details -> Click Show Work item Container
Here you can see the container and XML message used in this process step.
You might have information on how message be processed in this step
> I have checked in the workflow log and workflow shows the container operation only in the case of ParForEach mode and when the block is in the ForEachMode i dont see any container operation step in the workflowlog and even in the ParForEach mode the container operation dosent have any details.
Your Container Element reference to response message should also defined in block level, since the response message only exist inside the block. However, using process level container element should not cause any problem
> I have defined the response messsage at block level in the container and the target i have defined it as multiline element defiend at process level. This multiline element is taken as input in the transformation step at prrocess level.
are there any other alternatives for this process, i dont understand why the container operation is not appending the elments.
any help would be appreciated
Thanks,
srini
Edited by: srinivas kapu on Feb 25, 2008 12:10 PM -
Workflow stop at container operation
Hi,
I have problem in workflow.
My workflow stop at container operation and i don't have any idea why it could happend.
[Workflow Stop|www.freeimagehosting.net/uploads/4132b300f6.gif]
Thanks,Hi,
Can you check the workflow log with technical details.
I think it would give you better idea what is happening?
Try refreshing the buffer.
Regards,
Raj -
How can I rebuild my itunes library on my new computer that will include all my downloaded CD's. My new library only contains my purchased music,apps.books and movies, (My library on my old computer is scraped)
The library on my ipod is intact. I don't dare to sync with the library on my new computer because I will loose my cd music. Can I do a reverse sync IPOD to Itunes?Browse the app store. You will need a special purpose app to help you.
-
Context index and contains operator syntax how it works ?
Hi
I create a context index on four collumns (text_prof, text_gest, text_citizen, text)
of the same table content.
When i have more than one collumn being queryed using the contains syntax, oracle display the ora 29907 error saying found duplicated labels in primary invocations .
This query works:
SELECT * FROM content WHERE cod_type = '1'
AND (UPPER(title) LIKE UPPER('%tabagismo%')
OR contains (text, 'tabagismo',1)>0
This not works:
SELECT * FROM content
WHERE cod_type = '1' AND (
UPPER(title) LIKE UPPER('%tabagismo%')
OR contains (text, 'tabagismo',1)>0
OR contains (text_citizen,'tabagismo',1)>0
OR contains (text_gest,'tabagismo',1)>0
OR contains (text_prof,'tabagismo',1)>0
How can i fix it ?
I need to query all these colluns !
Does the contains operator can be used only in one collumn?
Thank´s in advanceHi
I create a context index on four collumns (text_prof, text_gest, text_citizen, text)
of the same table content.
When i have more than one collumn being queryed using the contains syntax, oracle display the ora 29907 error saying found duplicated labels in primary invocations .
This query works:
SELECT * FROM content WHERE cod_type = '1'
AND (UPPER(title) LIKE UPPER('%tabagismo%')
OR contains (text, 'tabagismo',1)>0
This not works:
SELECT * FROM content
WHERE cod_type = '1' AND (
UPPER(title) LIKE UPPER('%tabagismo%')
OR contains (text, 'tabagismo',1)>0
OR contains (text_citizen,'tabagismo',1)>0
OR contains (text_gest,'tabagismo',1)>0
OR contains (text_prof,'tabagismo',1)>0
How can i fix it ?
I need to query all these colluns !
Does the contains operator can be used only in one collumn?
Thank´s in advance -
Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items from the last itunes or anything from that OS because it had a virus and i just wanted windows 7)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD -
Rule containing "Mark as Read" and "Move to Folder" does not remove New Mail Notification
I asked this question in another forum here (sorry for not linking, but the forum would not let me because my account is not yet verified):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rule-containing-mark-as-read-and-move-to-folder/061a8009-dd98-4304-81b0-6c4c8a5a6205
They passed the buck to this forum. Can anyone help? Here is my original post:
I have set up a rule so that emails from a certain sender should be marked as 'read' and routed to a certain folder. The rule works just fine except for the fact that it does not remove the new mail notification from the taskbar icon
or the system tray. The rule reads as follows:
Apply this rule after the message arrives
with New Home Sale in the subject
move it to the _New Home Sales folder
and mark it read
Once I open the _New Home Sales folder, all messages are marked as read, as they should be. When I open any of the emails in this folder, the notification goes away. It does not even have to be the most recent email or the same folder
- opening any email from any folder clears the notification, even if the same email was used to clear it before. Previewing does not remove the notification.
I have a similar rule set up for another folder:
Apply this rule after the message arrives
with New Home Final Sale in the subject
move it to the _New Home Final Sales folder
and mark it as read
The same thing happens here with the unread notification.
This is very annoying, as I want to receive these emails but I do not need to know every time one comes in.
Does anyone have any advice on this? I have read a few threads about an unread email bug, but I'm hoping I'm just missing a setting somewhere. I find it hard to believe such a bug would persist this long.Hi,
From your description, I would like to verify the Exchange version and Outlook version at first. Since I have a test in my environment using Exchange 2010 with Outlook 2010. I create a same inbox rule, it works and there is no new mail notification from
the taskbar.
What's more, I recommend you use Outlook safe mode to determine whether the problem is caused by add-ins.
If the issue persists, please install the Outlook latest Service Packs and check the result.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Using foreach loop container with file system task to rename and move files
the foreach loop container will not rename and move files for me
sukaiduplicate of
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8f2899f1-43b0-47e0-8bd0-e082989cdcb8/file-system-task-and-foreach-loop-container?forum=sqlintegrationservices
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Issue with container divs, and absolute/fixed positioning
Hello everyone, I have an issue getting my divs to function properly. I have a container div and I want the table div to float inside (and move with page resize). Right now it doesnt move with the page (see photo).
However, when I change the position to relative of that div, it moves under the container div and locks itself there.(Second photo)
Any help would be great! Thanks!
Picture one:
Picture two
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<!-- TemplateBeginEditable name="doctitle" -->
<title>davide marchetti architetto</title>
<!-- TemplateEndEditable -->
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
<link href="ttp://mottie.github.com/tablesorter/css/theme.blue.css" rel="stylesheet">
<script type="text/javascript" src="http://mottie.github.com/tablesorter/js/jquery.tablesorter.js"></script>
<script type="text/javascript" src="http://mottie.github.com/tablesorter/js/jquery.tablesorter.widgets.js"></script>
<script type="text/javascript">
$(document).ready(function()
$("#myTable").tablesorter();
</script>
<style type="text/css">
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background-color: #FFFFFF;
margin: 0;
padding: 0;
color: #000;
background-image: url();
background-repeat: no-repeat;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color:#414958;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #4E5869;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */
.container {
width: 80%;
max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */
min-width: 780px;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */
/* ~~ This is the layout information. ~~
1) Padding is only placed on the top and/or bottom of the div. The elements within this div have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
.content {
padding: 10px 0;
font-size: x-small;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the overflow:hidden on the .container is removed */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
body,td,th {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
#apDiv1 {
position: relative;
width: 618px;
height: 268px;
z-index: 1;
left: 186px;
top: 147px;
overflow: hidden;
#apDiv2 {
position: relative;
width: 698px;
height: 299px;
z-index: 1;
left: 266px;
top: 117px;
overflow: scroll;
table.tableizer-table {
border: 1px solid #CCC; font-family: Courier New, Courier, monospace;
font-size: 12px;
.tableizer-table td {
padding: 4px;
margin: 3px;
border: 1px solid #ccc;
.tableizer-table th {
background-color: #000000;
color: #FFF;
font-weight: bold;
#apDiv4 {
position: relative;
width: 697px;
height: 299px;
z-index: 1;
left: -141px;
top: -636px;
overflow: scroll;
#apDiv3 {
position: relative;
width: 700px;
height: 300px;
z-index: 2;
h1,h2,h3,h4,h5,h6 {
font-family: "Courier New", Courier, monospace;
</style>
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
</head>
<div class="container">
<div class="container"><img src="../images/Davide.png" width="800" height="600" usemap="#Map" border="0" />
<div id="apDiv2">
<map name="Map" id="Map">
<area shape="rect" coords="48,416,125,435" href="../news.html" />
<area shape="rect" coords="262,416,304,436" href="../studio.html" />
<area shape="rect" coords="490,416,545,435" href="../projects.html" />
<area shape="rect" coords="702,415,751,436" href="../contact.html" />
</map>
<table id="myTable" class="tableizer-table">
<thead>
<tr class="tableizer-firstrow">
<th>YEAR </th>
<th>PROJECT</th>
<th>LOCATION</th>
<th>CATEGORY</th>
<th>STATUS</th>
</tr>
</thead>
<tbody>
<tr>
<td>2013</td>
<td>EXPO 2015 - Italian Pavilion</td>
<td>Milan - Italy</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td>2012</td>
<td>Requalification of "Almerici", "Bufalini" and "Fabbri" Squares</td>
<td>Cesena - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Re-thinking Shanghai: sustainable intervention along the Suzhou Creek</td>
<td>Shanghai - China</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>VCC Flat</td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td>2011</td>
<td>London 2012 Olympic Games Information Pavilion</td>
<td>London - UK</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Enhancement project for the sacred area of the sanctuary of Hercules Victor</td>
<td>Tivoli - Italy</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td>2010</td>
<td>VTL Flat </td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>BNC Flat</td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>Expansion of the "Farnesina" High School</td>
<td>Rome - Italy</td>
<td>Education</td>
<td>Competition / Selected Project</td>
</tr>
<tr>
<td> </td>
<td>Neanderthal Art Center</td>
<td>Pilo�a - Spain</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>New pedestrian & cycling footpath in the site of the "San Leopoldo II" old bridge</td>
<td>Poggio a Caiano - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Proposition 2065 - St. Leonards site</td>
<td>Sidney - Australia</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>MEIS - National Museum of Italian Judaism and Shoah </td>
<td>Ferrara - Italy</td>
<td>Culture</td>
<td>Competition / 3rd Prize</td>
</tr>
<tr>
<td> </td>
<td>36 The Calls Design Competition</td>
<td>Leeds - UK</td>
<td>Offices</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Europan 10: masterplan for an harbour area</td>
<td>Rudk�bing - Denmark</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td>2009</td>
<td>"Scuola in Piazza a Levante" - Kindergarten and public areas</td>
<td>Bisceglie - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>CIBAF - City of Kids </td>
<td>Frattamaggiore - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Designing in Teheran</td>
<td>Teheran - Iran</td>
<td>Mixed use</td>
<td>Competition / Selected Project</td>
</tr>
<tr>
<td>2008</td>
<td>DawnTown 2008: Waterworks</td>
<td>Miami - USA</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Venice Biennale New Australian Pavillion</td>
<td>Venice - Italy</td>
<td>Culture</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>New pedestrian and cycling bridge</td>
<td>Civita di Bagnoregio - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "San Ciro" Square</td>
<td>Portici - Italy</td>
<td>Urban planning</td>
<td>Competition / 2nd phase selected / 3rd Prize</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "Umberto I�" Square</td>
<td>San Ferdinando di Puglia - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Historic Renovation of the "Corsie Sistine" Hospital Wards </td>
<td>Rome - Italy</td>
<td>Culture</td>
<td>Tender Competition (design/bid/build)</td>
</tr>
<tr>
<td> </td>
<td>Cupboard</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>Office table and lighting system</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>New City Library</td>
<td>Legnano - Italy</td>
<td>Library</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Office table</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Volleyball Arena, Hotel and Commercial Spaces</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2007</td>
<td>New Provincial Archaeological Museum in the Santa Scolastica Monastery</td>
<td>Bari - Italy</td>
<td>Culture</td>
<td>Competition / 5th Prize</td>
</tr>
<tr>
<td> </td>
<td>The City of Water and Health</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Parkway Iconic Bridge</td>
<td>Sheffield - UK</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "Loveno 84" Sport Center</td>
<td>Menaggio - Italy</td>
<td>Sport</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>"Guardia di Finanza" Corp Main Headquarters</td>
<td>Catanzaro - Italy</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>"Lega Lombarda" Real Estate Complex Urban Development</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Tender Competition (design/bid/build) </td>
</tr>
<tr>
<td> </td>
<td>Necklace</td>
<td>Rome - Italy</td>
<td>Jewellery design</td>
<td>Prototype </td>
</tr>
<tr>
<td> </td>
<td>Moon putter</td>
<td>Rome - Italy</td>
<td>Product design</td>
<td>Prototype</td>
</tr>
<tr>
<td> </td>
<td>Aleale Coffee Table</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2006</td>
<td>"1st October" Public Square</td>
<td>Santa Maria Capua Vetere - Italy</td>
<td>Urban planning</td>
<td>Competition / 1st Prize / Built</td>
</tr>
<tr>
<td> </td>
<td>"Attilio Pecile" New Square and Sustainable Mixed Use Building</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>Renewal of the "Porta Nuova" Old Tower</td>
<td>Venice - Italy</td>
<td>Culture</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>"Meno e pi� 4": Civic Center and Pre-school Building</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / Mention</td>
</tr>
<tr>
<td> </td>
<td>Urban Renewal of Historic Building and Public Squares</td>
<td>Conversano - Italy</td>
<td>Urban planning</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>New Seafront and Beach Accesses</td>
<td>Fregene - Italy</td>
<td>Urban planning</td>
<td>Competition / Mention</td>
</tr>
<tr>
<td> </td>
<td>Requalification of Main Streets and Squares of the Old City Centre</td>
<td>Bari - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Gyeonggi-do Jeongok Prehistory Museum</td>
<td>Jeongok-ri - South Korea</td>
<td>Culture</td>
<td>Competition / Honourable Mention</td>
</tr>
<tr>
<td> </td>
<td>Low-income housing development</td>
<td>Guadalajara/Ceuta - Spain</td>
<td>Residential</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Shop extension</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Temporary Concert Hall</td>
<td>Rome - Italy</td>
<td>Culture</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Office Space Interior Design - New Seat of the Lombardy Regional Government </td>
<td>Milan - Italy</td>
<td>Office</td>
<td>Tender Competition (design/bid/build)</td>
</tr>
<tr>
<td>2005</td>
<td>Europan 8 - Urban Requalification</td>
<td>Istanbul - Turkey</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Natural Park Visitor Center, Kindergarten and Primary School</td>
<td>Funes - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Coastal Area Development</td>
<td>Latina - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Requalification of Three Squares</td>
<td>Benevento - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Office and Data Center New Building in the Ministry of Defense headquarters</td>
<td>Rome - Italy</td>
<td>Office</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2004</td>
<td>JCD Floating Pearl Store</td>
<td>Tokio - Japan</td>
<td>Retail</td>
<td>Competition / 2nd phase selected </td>
</tr>
<tr>
<td> </td>
<td>Requalifications of Rome�s Beachfront and Coastal Areas</td>
<td>Ostia - Italy</td>
<td>Urban planning</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>40 Apartments Building and Sport Center</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>nMBA New Beaux-Art Museum</td>
<td>Lausanne - Switzerland</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>The Dubai Residence and Hotel Towers</td>
<td>Dubai - UAE</td>
<td>Mixed use</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Shoes and Accessories Shop</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td>2003</td>
<td>Pedestrian and cycling Bridge </td>
<td>Rome - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Temporary Pavillion for a Car Show</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Belvedere Tower</td>
<td>Castellammare di Stabia - Italy</td>
<td>Infrastructure</td>
<td>Concept Design</td>
</tr>
</tbody>
</table>
</div>
</div>
<!-- end .container --></div>
</body>
</html>#apDiv2 {
position: absolute;
width: 698px;
height: 299px;
z-index: 1;
left:50px;
top: 117px;
overflow: scroll;
Don't forget to fix your code errors. You're still missing a <body> tag in your markup.
Nancy O. -
Passing expression values to a container operation
hello,
I have a question about passing values to a expression in a container operation. we have a container operation that has a hard coded value for a expression value. we are using a result element of offset days and the expression value is 4. sometimes we want to have this value as a different number. when we do this we have to change the expression value, create a transport , then move thru quality and then prod. is there a way to have the the expression value passed as a variable to the workflow?
if the value could be in a custom table that could be changed when ever it was needed and the workflow would read the value from the table.
I am not fimilar with workflow so the suggestion that I have above might not be correct but I am looking for something on the order of this. if there is a way to accomplish this without having to change the workflow and move it through quality and then production that would be ideal.
thanks in advance for the help.Marcos Suarez wrote:
It is really a bad idea to use a Container operation step to get a variable value.
Why? I disagree, using a task has a far greater performance overhead with hardly any benefit, a functional method in a conainer operation is much more efficient. It also makes your workflow a little bit easier to follow.
Unless I misunderstood something?
Edit: For the benefit of the original question, there are examples of how to do exactly this (functional method to retrieve/assign values) in the second edition of "Practical Workflow for SAP". And since proceeds go to charity, getting a copy is doubly worthwhile.
Edited by: Mike Pokraka on Feb 3, 2011 1:55 PM -
ERROR ITMS-9000: "META-INF/container.xml must contain one and only one root file reference."
Hi all,
After correcting a table-of-contents error in my .epub file, I am unable to upload it via iTunes Producer. It lists this error message:
ERROR ITMS-9000: "META-INF/container.xml in 9780615431727.epub must contain one and only one root file reference." at Book (MZItmspBookPackage)
The file has been verified and only has one root file reference in the container.xml file.
Has anyone been able to find a solution to this problem?
Thanks!Hello Forum Users…
For those of you who have run into the upload roadblock, getting an error message similar to this:
Package Summary:
1 package(s) were not uploaded because they had problems:
/Users/slm/Desktop/MUSIC to PICTURE for IBOOK/2012 MTP for iTUNES Bookstore/9780615600918.itmsp - Error Messages:
Apple's web service operation was not successful
Unable to authenticate the package: 9780615600918.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): 'p50': fragment identifier is not defined in 'OPS/content9.xhtml'" at Book (MZItmspBookPackage)
Following is a "specific" fix, but the idea of the fix will help you with your specifics too.
I tried for 17 days to upload a book that looked and worked perfectly in iPAD via Preview.
After many discussions with Apple, who to their credit stayed with me over 2-3 days, I decided to play a hunch.
I went into a duplicated copy of the book and on every page, (because the error message was not telling the whole story), looked for what InDesign would call "Overset Text."
Now... the "flaw" in iBOOK Author (hint) is that it won't advise you of this "overset text" as does InDesign.
And to compound the matter, the exported ePUB document WORKS in iPAD Preview.
See Screenshots from InDesign:
Okay... Couldn't add it but it is a Warning Box that says there is overset text. (Characters which exceed the text box.)
Nevertheless, I played this hunch, and sure enough found a few boxes with the + in them. In other words I clicked on EVERY text holder and every text block in the entire document.
Where I found + signs, I simply deleted some carriage returns from the iBOOK file... (please note… carriage returns and literally empty spaces that caused the overset text) and then erased all previous copies of the Music to Picture Book on my hard drive, iTUNES and iPAD.
The result? A "text-book" upload with no snags! As my Son would say… "Victory!"
So, first make sure that you are using only PNGs, Jpegs and Movie files to iBook Specs. Then... make sure there are no overset text boxes, which you must do manually.
Enjoy & Godspeed!
Steve
Stephen Melillo, Composer
STORMWORKS®
209 Spinnaker Run
Smithfield, VA 23430-5623
USA
v/f 757-356-1928
stormworld.com
“History is a vast early warning system.” Norman Cousins, editor and author (1915-1990)
"This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." Leonard Bernstein
“If you have a chance to help someone, and you don’t, you are wasting your time on this earth.” Roberto Clemente -
i have been trying to import MPEG and MOV files to iMovie 08 without any success.
the movies i have already previously copied to my HD, or have been copied for me, so I am not copying them from any camera.
The funny thing is ... when i look into my iPhoto library from iMovie he does recognise the videos i have copied directly from my digital photo camera, but i can't just copy any MPEG or MOV files from any other location, previously copied, to my iMovie library.
Does anybody here have the same problem as me?Does anybody here have the same problem as me?
Everyone will have this problem. It is the way iMovie '08 is currently programmed. The basic problem is that most users fail to realize that there are three distinct levels of support in QT based applications:
1) Playback Support - This simply means a particular compresion format can be played in a QT application. E.g., MPEG2 video is not normally supported without the QT MPEG-2 component while MPEG1 and H.264/AAC files are both playback compatible as they are.
2) Conversion Support - This means a file can be "properly" converted to another compression format. In this case, "muxed" formats like MPEG1 and MPEG2 (even with the QT MPEG2 component) cannot be converted to another compression format by QT applications and retain their audio content while H.264/AAC files can.
3) Edit Support - This means that certain operations can be performed on the audio and/or video content at the frame level. QT applications can, for instance, segment the audio and video content of an H.264/AAC file at any frame but since "muxed" files like MPEG1 and MPEG2 files consist of "blocks" of audio data interspersed with "blocks" of video data in a single stream, segmenting a file at any point other than one where a "group" of such "blocks" ends/begins would mean the loss of many "frames worth" of either audio or video data. AVI has a similar problem. Since the "instances" of audio and video data mesh like the cogs of two wheels, segmenting an AVI always leaves a 1 frame deficit between the number audio frames and the number of video frames. (Ever wonder why you end up with that one "white" frame at the end of youe file?)
Now we come to the various types of QT based applications. Many, like iPhoto and iTunes don't really look at the files when they import them, so they are more than happy to import anything they can read and recognize. If a file can be played in the QT player, it can be played in both iPhoto and iTunes. On the other hand, some applications are a bit "picky" about what they will export. iTunes, for instance, will not export/sync a file it has imported if the target device cannot play it. iMovie '06 is also different, in that it will import anything it can convert even if it can't convert it properly -- i.e., an MPEG1 file will be converted to DV video but lose any audio that may have been contained in the file. iMovie '08 takes things to a new level. Since imported files are simply moved/copied to "Events" folders in their original compression format, iMovie '08 first checks to see if the files contain both audio and video data that can be edited at the frame level. If both cannot be edited at the frame level, then iMovie '08 will not allow you to import it. Camcorder devices, however, are handled differently. Since most content on tapeless models are not stored in a QT edit supported format, these files, as well as HDV, are converted to an intermediate codec (which can be edited) as part of the import process.
As to digital cameras, many manufacturers store their video clips in generic file containers. Just because a Kodak digital camera stores its data in an MOV file container, it does not mean bothe audio and video compressions formats can be edited in iMovie '08. Many Kodak models, for instance, store their video clips as MPEG4/µ-Law 2:1 files. Unfortunately, while the iMovie will accept the MPEG4 video, it doesn't like the µ-Law compressed audio. Same holds true for many Casio digital cameras which use Motion JPEG/DVI ADPCM comressed formats. Once again, iMovie has no problem with the Motion JPEG video content but refuses to accept the DVI ADPCM audio. Luckily, users have two options here. They can either convert both the audio and video to an iMovie '08 edit compatible compression format or simply convert the audio content and "re-merge" it with the original video for maximum quality. And, of course, MPEG1/2 "muxed" files or M2V files with unsupported audio compression formats must be converted for the reasons already mentioned above. -
.DV and .MOV files don't play smoothly in the Final Cut Express viewer
Hi,
I bought Final Cut Express 4.0 yesterday, so I have no experience with it. I only used iMovies HD 6.0.3 a little before.
Problem:
When I import my .MOV and .DV files into FCE 4.0, then try to watch them in the viewer they don't play smoothly. The sound is fine, but the video is not smooth, it plays in stops and starts.
Just to see, I tried importing a .FLV file and it plays just fine in the viewer, both audio and video runs smoothly with no 'stop starting'
I experimented with importing different file sizes of .DV and .MOV, from 3GB to a few MB even and even very small clips of a few KB. But regardless of the size I always have this problem of them not running smoothly in the viewer.
One of the .MOV files I tried to import was a reference file, and I later read in the manual that FCE may only recognise the original file. But I have the same problem even with the Original file and other self contained files that have been copied from the original. So it doesnt seem to just a problem with reference files.
Any idea what the problem might be?
Is it something to do with how I have FCE set up?
Or is it that the .MOV and .DV files are not being properly imported and is this why they are not running smoothly in the viewer?
I'm using a MacBook with 10.4.11 operating system, which the guys at my local Apple store said would be fine for using FCE 4.0.
Hope someone can help,
Ian.Look at item properties for the .mov and .dv files. What exactly does it say they are? What drive are they playing back from? Make sure the contents of the viewer are set to fit to window in the View popup at the top of the viewer.
Maybe you are looking for
-
Mac version of BlackBerry Desktop Manager KB articles
The following is a list of knowledge base articles for the Mac version of BlackBerry® Desktop Manager: KB18769 - System requirements for BlackBerry Desktop Manager version 1.0 (for Mac OS) KB18770 - Features of BlackBerry Desktop Manager 1.0 (for Mac
-
I am new to this support community. I was givin a stick with a bunch of music on it, I wanted to install it on my music and have never done any installations. The 3000 some songs got into my system 3 times so I have 6000 some in my desktop file and h
-
Hello everyone, An idea came to my head when I start my application which is to manipulate files and directories on the server as we do on our machines, a system that offers approximately the same capabilities and functionalities such as drag and dro
-
Enable save local file option.
Dear all, After patch application, the option of saving su53 screen to a local file is disabled.(system>list>save>local file). what i ahve to do to enable it.. Reagdrs Sandy
-
Long ago I put a system on my external firewire drive in order to use it as an emergency repair drive. I now need the extra space on the drive more than I need a bootable disk. I was about to simply delete all folders (System, Library, Users, Applica