Content checked in status doesn't change

Hi,
When ever I check in a file(doc,hcsp etc) to the UCM, its status always default to "Done" instead of "Released". Need to know whats the issue
Thanks,
Abhijit

Hi
Seems indexer is playing spoilsport here .See if the indexer is throwing error for these contents . You can get that by enabling indexer tracing option from System Audit Information page.
Thanks
Srinath

Similar Messages

CUPC 8.0.3 busy status doesn't change to offline on OS (windows) shutdown

Hi,
We found the following problem with CUPC8.0.3.
When you set the status to 'busy' or 'do not disturb' and you shut down or restart windows (without closing the CUPC program manually) the status doesn't change to offline (from the perspective of other CUPC users or the CUPS end user information page)
If the status is availabe it is going to offline when windows is shut down or restarted
Does anyone know if this is a defect...?
Thanks
rgs
Luk

Hi Luc,
Yes I managed to reproduce it in my lab as well. As soon as you login (after a shutdown) the user is shown busy again.
This is working as expected and it is a known behaviour. It is tracked by the following defect
CSCsl11256
The thing is that a fix would require a lot of changes in CUPC architecture and there is no known date where this issue will be tackled.
This does not happen when the user is already in available status because the busy and 'do not disturb' require special handling
I hope this clarifies things a bit.
Regards,
Christos

User status doesn't changes in WebAdmin console even after deprovisioning..

When a user’s organization is changed from one to another, he is automatically deprovisioned at once from the target resource (if already provisioned).
But when you check the status of that user in the WebAdmin console it shows as Provisioned to that resource. Even manually disabling and revoking the access doesn’t works. Nor the user can be provisioned to that target resource again as in when you go to resource profile of that user, there is no resource (that specific target resource to which he was provisioned earlier) present.

Can anybody give a solution to the above problem???
Thanks in Advance ..
Abhishek

Thread status doesn't change

If I read thread and leave it then status (red ball next to thread name) should be white, but it isn't. Somebody knows why. It helps reading thread.
Peter D.
I noticed that in SQL\PLSQL forum. In this forum if I leave thread red ball changes to while to last visited thread.
Message was edited by:
Peter D.

See Content indicator

Calc Status doesn't change on Prior Months...

After I load metadata I "consolidate all with data" for December of a given year. Once this consolidation is finished the Calc Status of Dec is "OK" but when I look at any Prior Month within the same year the Calc Status is "OK SC" It is my understanding that consolidating any given month would consolidate all prior periods within the same Scenario/Year. Is there a way to fix this so the prior periods are consolidated as well?

It would consolidate prior months if there was some change in the data for those months. Here, you have changed metadata therefore the status is "OK SC" which means that it is calculated/consolidated but there is a System Change (SC) since the last calculation/consolidation. HFM has no way to know whether you wanted to keep the calculations according to the previous version of your rules, so it does not execute consolidation for those periods. Bare in mind that rules may change from period to period due to changes in regulation (or more generally in the client's business needs) in contrast to the reason that the system is not yet finalized, which is probably your case at hand. In this case you must manually execute the consolidation for those periods.

I received a mail from Apple but my status doesn't change

I ordered my ipod touch on sept 17, my status is processing items but with delivery date 26-30 oct.... But yesterday Apple send me a mail and it says this:
Estimate (a) Client Apple, Thank you for your recent purchase at the Apple Store. We are pleased to inform you that your recent order of iPod Touch be shipped ahead of schedule. The new shipping date is to 3 business days. Please visit:http://store.apple.com/mx/orderstatus to review the latest information on the status of your order.
I saw my status and still in the same: processing and with delivery date... I waiting for the mail "Preparing for shipping" and nothing or only Apple will send a mail for "Shipped"? please tell me because I'm so anxious and desperate! (I'm from Mexico)

OOOhhh really? mmm so I guess that the both mails could arrive next week (monday or tuesday) because mail said 3 days ... today was one jujuju or not?
SanTakesOff wrote:
from what ive seen, preparing to ship and shipped happen in the same 24 hours. usually it will say preparing to ship, then later on in the day, it will say shipped

My Battery status doesn't change on my MacBook Pro and then dies

Hi, I have a MacBook Pro that is maybe a year and a half old and is running Snow Leopard. Just recently (only yesterday) I realized that the batter status widget in the menu bar is lying to me. It always reads 3:35 (95%). And then it dies without a warning of low battery. It is extremely annoying and if not for the auto-recover function of Word, I would've had to rewrite an essay yesterday. Once I plug in the charger, the computer recharges. I think everything is working, it's just that the computer isn't notifying me about the battery status.
Thanks in advance!
~Chet

Apple Portables: Low power warning does not appear while running off of the battery
Using Mac OSX v10.6
Consider updating to 10.6.8

Apple Mail message read status doesn't change when read

In Apple Mail, when getting mail from an Exchange 2010 server on the corp LAN works great. However, on about 2 out of 10 messages, after I read the message it still has the "dot" showing it as unread and I have to manually select mark > as read. I even let it sit for a while thinking it has to sync but no luck. I still have to manually mark it. Very frustrating. Any ideas?

To clarify something else, the unread mail badge disappears off of the app in the tray as well as the inbox in the lefthand column. But the blue dot remains on the conversation thread.

Creating check on officers who can change a sales order - User Status

The user needs to create a check on persons who can change (User Status) on the sales order created.
The sales order are created by a group of people. These group of people can not be allowed to change the sales order - User Status(In header Detail).
Only a second level user users should be allowed change this user status.
Can it be done at configuration level. Or should we use an Exit?
Thanks in advance.

Hi Sunoj,
I never have used this auth. objects, but if you want to set restrictions on some users, search before in auth. objects. As I told you, you can use the tcode SU24 for this purpose. Do the selection, see the result, try it with tcode PFCG and check it.
If you can do something with customizing tools or other standard tools (as authoritation tools) avoid the use of enhancements, BADI, BTE'S and so on. If you don't find the solution, then go to userexits.
I hope this helps you
Regards
Eduardo

Lync 2013 doesn't change status to be "In Meeting" when we have meeting based on Calendar in Outloook

Hi Sir,
My company use MS. Lync 2013. All PCs are set as default to "Update my presence
based on my calendar information". So most of them whenever they have meeting based on calendar in Outlook, the Lync status will be changed to be "In Meeting" BUT I found just 2-3 computers not change to be "In Meeting". It still keeps
showing as "Available". Could you please advise the solution ?
PS. I already tried to uninstall and re-install but the problem still same.

Hi,
Please check the value of CalendarStatePublicationInterval, it will control the time of Lync waiting before retrieving calendar information from Microsoft Outlook and adding this data to your presence information.
For example, to set the CalendarStatePublicationInterval to 10 minutes (600 seconds) use this syntax:
CalendarStatePublicationInterval 600
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

My email says it's checking mail but doesnt find any and doesn't change update time

My email says it's checking mail but doesnt find any and doesn't change update time. Only started today. Have checked settings and tried turning off to no help. Can anyone help?

which email account is it? is it happening with all accounts or just one? Have you tried closing the mail app out of multitasking?

How to check the status of file downloading?

I have to download the selected file by using "file download" dialogue box.
This "File Download" dialogue box provides options for "Open", "Save", "Cancel" or "More Info". It is similar to usual "File Downloading".
And i am required to do further processing only if , file is "Open" or "Save".
So how can i check the status of the option selected by the user?
Following is the code snippet:
res.setContentType("text/plain");
res.addHeader("Content-Disposition", "attachment; filename=" +value);
try
     uFile= new File(fPath);
     fSize=(int)uFile.length();
     fis = new FileInputStream(uFile);
     c=-1;
     while ((c = fis.read()) != -1)
          out.print((char)c);
     fis.close();
     out.flush();
     out=null;
catch(Exception e)
       out.println("Exception : " +e);
} I tried to generate a flag and inside a while loop, and then checking the status of that flag outside of loop.
But it doesn't work.
It reflects the value of flag even if user selects "Cancel" Option.
So, if there is any another way of checking the option selected by user from "Open","Save" or" Cancel", then please reply me.
Thanks in advance.

Is there any solution for this or any web link for this...?
Thanks in advance,
Waiting for reply

Why property doesn't change back to unspecified?

A serious flaw in forms is that after changing property of items from unspecified to sth. it doesn't change back to unspecified and doesn't take blank either although it says enter blank if u don't want to specify any property.
if i specify some property it mayn't suit my original settings. though a small problem, this may sometimes cause delay in work.

Hi palmetto2008, 
check this article: [[Font size and zoom - increase the size of web pages]]
 
Shortly, you can configure Firefox to display all text at a minimum font size. If a web page contains text that is smaller than your defined minimum size, Firefox increases the font size of the text to this minimum. To set a minimum text size:
* On the menu bar, click on the Firefox menu and select Preferences...
* Select the Content panel.
* In the Fonts & Colors pane, click Advanced....
* In the Minimum Font Size drop-down, select the minimum size in pixels in which all text must be displayed.
 
Regarding NoSquint addon, you should be able to override the default zoom options and keep your settings between Firefox restarts. 
See also here: [https://urandom.ca/nosquint/help.php NoSquint Help Page]
 
Apparently, there are many addons offering your desired feature like:
* Default FullZoom Level
* Zoom Page
 
Hope that helped you! Please report back!

Release Status Code not changing

Hi experts,
     There is a button "Released" on CustomerInvoiceRequestQAF. After released, the new invoice that I have created should be released.
     But I check the released status code in CustomerInvoice.xbo's BeforeSaveEvent and the status is still not changing. It still shows "Not Released".
The steps when I press Release on CustomerInvoiceRequestQAF.
1.CustomerInvoice.xbo's BeforeSave (because I have written some code there)
     this.Status.ReleasedStatusCode is still "1" meaning "Not Released". It should be "3" (Released)
2.CustomerInvoiceRequest.xbo's BeforeSave
     this.Status.LifeCycleCode is still "1" meaning "Not Released".It should be "2" (Released).
When I press Release on CustomerInvoiceQAF. The status is changed to Released.
Thanks in advance.
Regards,
Fred.

Hi, Horst,
     Thanks,
     This case involves 2 standard BOs. CustomerInvoiceRequest and CustomerInvoice.
     CustomerInoivceRequestQAF--->Save     -->Invoice Requests (CustomerInvoiceRequestOWL)
      I can release the invoice directly here.
     CustomerInvoiceRequestQAF-->Release -->Invoice Documents (CustomerInoivceOWL)
     OR
    I can release the invoice this way. First "Save as Invoice", and Then "Release" it in Invoice      Documents.
      CustomerInoivceRequestQAF--->Save As Invoice -->CustomerInvoiceQAF(with a status "Not      Released")
     CustomerInvoiceQAF--> Release -->Invoice Documents(with a status "Released")
     The second case works fine. In the first case, the release status code doesn't change to "Released".
Regards,
Fred.

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

My macbook pro won't start up. I get the white screen and the grey apple icon   the spinning wheel......and it doesn't change !

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Content checked in status doesn't change

Similar Messages

Maybe you are looking for