Content conversion parameters for fixed length file

Hi,
Hey i have a small doubt.My input is like this
99443 123213 232234 12312 127544 23423
Here i have four recorsetnames namely HEADER1,HEADER2,HEADER3,HEADER4,HEADER5,HEADER6 all the recordsets are of same size but the lengths of the fields in it vary so i specified the following parameters
HEADER1.fieldFixedLengths=1,3,1
HEADER1.fieldNames=value1,value2,value3
HEADER1.endseperator=" "
HEADER2.fieldFixedLengths=1,3,2
HEADER2.fieldNames=value1,value2,value3
HEADER2.endseperator=" "
MY OUPUT XML STRUCTURE SHOULD BE like this
<header1>
<value1>9<\value1>
<value2>944<\value2>
<value3>3<\value3>
<\header1>
<header2>
<value1>1<\value1>
<value2>232<\value2>
<value3>13<\value3>
<\header2>
Is the content conversion parameters i specified enough for that. I wanted to know how would it know the begin of the next recordset(ie the seperation between the two recordsets) .Please help me its vey urgent
Thanks in advance
Sriandh

Are header 1 fields always going to occur first , then header 2 and so on?
By default file adapters do not support Nested Strcutures and so if the sequence is going to be the same and all of these have an occurence of 1..1 then things will work.
But if there is going to be an occurnece of * then you will need to use KeyFields.
Regards
Bhavesh

Similar Messages

File Content conversion - IDOC to Fixed length File

Hi,
Scenario : SAP R/3(IDOC) -> XI -> Fixed Length file
IDOC is sending from SAP R/3, XI has to do the mapping and send a Fixed length File to /tmp in XI.
When I am using the message Protocol as "File" in the Receiver communication channel, XML file is writing to /tmp. When I am using "File Content Conversion" as a message protocol,Empty File is writing. Can anybody tell me why empty file is creating. Can we use File content Conversion in this scenario. Is there any additional parameter or settings required?
Receiver communication channel settings:
Message Protocol: File Content Conversion
File type       : Binary
Recordstructure : MT_V_PER01
Name                             Value
MT_V_PER01.fieldFixedLengths     25,35
MT_V_PER01.fieldNames            PERSNR,NAME
File Data Type : DT_V_PER01,
Message type   : MT_V_PER01
IDOC type      : WP_PER01.
Expecting your expert advice.
Thanks
vineesh

Hi Moorthy,
I am getting success messages in Audit log as below:
2006-09-29 12:08:53 Success Trying to put the message into the send queue.
2006-09-29 12:08:53 Success Message successfully put into the queue.
2006-09-29 12:08:53 Success The message was successfully retrieved from the send queue.
2006-09-29 12:08:53 Success The message status set to DLNG.
2006-09-29 12:08:53 Success The message was successfully transmitted to endpoint http://nslcxi08:8010/sap/xi/engine?type=entry using connection AFW.
2006-09-29 12:08:53 Success The message status set to DLVD.
2006-09-29 12:08:53 Success The message was successfully delivered.
I have checked the Payload maindocument,the IDOC structure contains data.
<?xml version="1.0" encoding="UTF-8" ?>
- <WP_PER01>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<IDOCTYP>WP_PER01</IDOCTYP>
<MESTYP>WP_PER</MESTYP>
<STDMES>WP_PER</STDMES>
<SNDPOR>SAPLCD</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>LCDCLNT210</SNDPRN>
<RCVPOR>LXDCLNT250</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>LXDCLNT250</RCVPRN>
</EDI_DC40>
- <E1WPP01 SEGMENT="1">
<PERSNR>0000100006</PERSNR>
- <E1WPP02 SEGMENT="1">
<NAME>Consumer</NAME>
</E1WPP02>
</E1WPP01>
</IDOC>
</WP_PER01>
Thanks
Vineesh

Content conversion parameters necessary for fixed length file

Hi,
I new to xi.The scenario is that i have to handle a fixed length file where the records repeat after every 80 characters.Can anyone help me as to how thw identify the start of every record based on length
thanks and regards ,
srinadh

Hi,
Hey i have a small doubt.My input is like this
99443 123213 232234 12312 127544 23423
Here i have four recorsetnames namely HEADER1,HEADER2,HEADER3,HEADER4,HEADER5,HEADER6 all the recordsets are of same size but the lengths of the fields in it vary so i specified the following parameters
HEADER1.fieldFixedLengths=1,3,1
HEADER1.fieldNames=value1,value2,value3
HEADER1.endseperator=" "
HEADER2.fieldFixedLengths=1,3,2
HEADER2.fieldNames=value1,value2,value3
HEADER2.endseperator=" "
MY OUPUT XML STRUCTURE SHOULD BE like this
<header1>
<value1>9<\value1>
<value2>944<\value2>
<value3>3<\value3>
<\header1>
<header2>
<value1>1<\value1>
<value2>232<\value2>
<value3>13<\value3>
<\header2>
Is the content conversion parameters i specified enough for that. I wanted to know how would it know the begin of the next recordset(ie the seperation between the two recordsets) .Please help me its vey urgent
Thanks in advance
Sriandh

What are the content conversion parameters for this structure

Hi All,
The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
Schedule D - District/Port List (by District Code) [Produced13APR11]
District |    Port      |    Name
Code     |    Code      |
01       |              |    PORTLAND, ME
         |    0101      |    PORTLAND, ME
         |    0102      |    BANGOR, ME
         |    0103      |    EASTPORT, ME
         |    0104      |    JACKMAN, ME
         |    0105      |    VANCEBORO, ME
         |    0106      |    HOULTON, ME
         |    0107      |    FORT FAIRFIELD, ME
         |    0108      |    VAN BUREN, ME
         |    0109      |    MADAWASKA, ME
         |    0110      |    FORT KENT, ME
         |    0111      |    BATH, ME
         |    0112      |    BAR HARBOR, ME
         |    0115      |    CALAIS, ME
         |    0118      |    LIMESTONE, ME
         |    0121      |    ROCKLAND, ME
         |    0122      |    JONESPORT, ME
         |    0127      |    BRIDGEWATER, ME
         |    0131      |    PORTSMOUTH, NH
         |    0132      |    BELFAST, ME
         |    0152      |    SEARSPORT, ME
         |    0181      |    LEBANON AIRPORT
         |    0182      |    MANCHESTER USER FEE AIRPORT, NH
02       |              |    ST. ALBANS, VT
         |    0201      |    ST. ALBANS, VT
         |    0203      |    RICHFORD, VT
         |    0206      |    BEECHER FALLS, VT
         |    0207      |    BURLINGTON, VT
         |    0209      |    DERBY LINE, VT
         |    0211      |    NORTON, VT
         |    0212      |    HIGHGATE SPRINGS/ALBURG

since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
Regards,
Ninu

Gui_download issue - trailing spaces getting truncated for fixed length fil

Hi All,
I have a requirement where I need to download an internal table as a fixed length file.
The code is as follows:
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = L_FILE
FILETYPE = 'ASC'
APPEND = 'X'
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = ' '
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = IT_TEXT
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
Each row in the internal table IT_TEXT is 242 chars long.
The FM is truncatinf the trailing blanks on the file. How do I get the FM to not truncate the trailing blanks in each row?
My internal table has multiple rows and the number of rows on the table should be same as the number of rows on the downloaded file.
I tried setting the WRITE_LF parameter to space.
In this case, the trailing spaces are not truncated(which is as per my requirement), BUT all the rows in the internal table appear in a single line on the downloaded file instead of multiple rows.
I also tried setting the TRUNC_TRAILING_BLANKS field to space but that does not work either. Spaces at the end of the row are still truncated.
so the requirement is: the spaces at the end of each row should not be truncated and
each row on the internal table should have a corresponding row on the downloaded file.
(it is a fixed length file)
I also tried using the following code
class cl_abap_char_utilities definition load.
DATA: BEGIN OF IT_TEXT OCCURS 0,
       TEXT(242) TYPE C,
       cr_lf TYPE c VALUE cl_abap_char_utilities=>cr_lf,
      END OF IT_TEXT.
when i compile, i get the following error
The type "CL_ABAP_CHAR_UTILITIES" is unknown.
Im using R/3 4.6C. Could this be a problem?
Please suggest a solution for this problem.
Thanks!
Sandeep
Edited by: sandeep reddy on Jul 25, 2008 7:16 PM

Hi,
Try this..This worked..Add a dummy character at the end of the internal table...Then pass trunc_trailing_blanks   = ' '...
PARAMETERS: p_file TYPE rlgrap-filename
            DEFAULT 'c:\test_download.txt'.
DATA: BEGIN OF s_data,
        data TYPE char10,
        dummy,      " Added this.
      END OF s_data.
DATA: t_data LIKE TABLE OF s_data.
s_data-data = 'Test'.
APPEND s_data TO t_data.
s_data-data = 'Test2'.
APPEND s_data TO t_data.
s_data-data = 'Test3'.
APPEND s_data TO t_data.
s_data-data = 'Test4'.
APPEND s_data TO t_data.
* Download.
DATA: v_file TYPE string.
v_file = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                = v_file
    trunc_trailing_blanks   = ' '
TABLES
    data_tab                = t_data
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    OTHERS                  = 22.
Thanks
Naren

File content Conversion Issuse for a Sender File Adapter

Hi All ,
             I am working for a Migration project , so my File structure will be as follows
<HEADER>
      <DATA1>
     <DATA2>
     <DATA3>
   <HEADER>
<ITEM>
     <ITEM1>
     <ITEM2>
     <ITEM3>
<ITEM>
WHERE i do have flat file will be as follows
10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
how to pick this file using FCC from sendere flat file adapter without keyfields , and i can use fixed length also

Sridhar,
You can use a work around like this. Create a generic Data Type something like below.
<Message Type>
   <Recordset> - root node
      <ROW> - element with occurence 0..unbounded
Now create an outbound MI with the above MT, in FCC in sender file adapter, give Recordset structure as ROW, *
This way , you will read the entire file inside XI as an XML like below
<ROW> header record </ROW>
<ROW> item record 1 </ROW>
<ROW> item record 2 </ROW>
<ROW>....</ROW>
In XI , since your header row & item rows are fixed length, now, you can use that in a UDF in your message mapping , or parse the xml using DOM parser in Java mapping, you should be good. Hope this helps.
~Saravana

Java mapping for fixed length file in XI

Can Anyone help me On this?

Hi,
This may Help you
Check these for JAVA Mapping
Java Mapping (Part I)
Java Mapping (Part II)
Java Mapping (Part III)
Testing and debugging
Testing and Debugging Java Mapping in Developer Studio
Implermenting JAVA Mapping in PI
Implementing a Java Mapping in SAP PI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400ee77e-f9d6-2a10-2b8c-99281a4dcf6b
REgards
Seshagiri

Content Conversion issue for header record

Hi,
We have a very urgent question on an issue here with one of our XI objects.
This is an inbound interface from an external system into R/3 & BW. The inbound file has a header record (with about 8 fields) and detail records (about 900 fields per detail record). Data going into R/3 & BW don't have header records and everything goes in as detail records. One field from the header of this source file should be passed to the target structure at the detail level. Also, we are NOT using BPM.
Can someone help us how we could define the file content conversion parameters for File adapter.
Thanks in advance ......
Prashant

I'm so sorry, I wasn't subscribed to this thread and I didn't realize there were responses.
If you have a message type made up of a Header with 1 occurence and Detail with 1 to unbounded occurunces, you'd want to do the following in content conversion:
Document Name - your message type
Document Namespac - your message type namespace
Recordset Structure - Header,1,Detail,*
Recordset Structure - Ascending
Then you'll need to set some of the parameters, depending on the layout of your incoming file.
As for the problem of having hundreds of fields, I'm less sure about that.
Would it be possible to break your detail data type down into smaller data types. Each with fewer fields. You'd still have to maintain every field in content conversion, but at least they'd be in seperate parameters, instead of all 900 in one tiny box.
Here's a very rough example of what I mean:
If you have 900 fields, instead of making 1 data type of detail, you could make 9 data types, Detail1, Detail2, Detail3, Detail4, Detail5, Detail6, Detail7,Detail8, Detail 9, each with 100 fields in them (or more with even less fields).
Setting things up the file content conversion would be more complex in this scenario, so it might be a toss up if it's worth it to break it up this way or not if it meant configuring quite a few more parameters.
For example,
You'd have to declare your recordset structure like Header,1,Detail1,,Detail2,,Detail3,* etc, and you'd have to make sure to set the .endSeparator to '0' for all of the first 8 details, so it would recognize that they were all on one line.
I hope this helps a little bit.

Sender content conversion parameters

what wld be the sender content conversion parameters for the following structure?
MessageType        1-1
    Records            1-1
       File                1-unbounded
thanks

Hi,
If you have not come across:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
would be of help.
Regards,
Manjusha.

File Content Conversion Parameters in FIle Adapter

Hi
I am doing a scenario - XML file to Text file using File content conversion parameters in Receiver File Adapter Channel.
I given FCC Parameters like:
DATA.addHeaderLine - '0'
DATA.fieldSeparator - ,
DATA.endSeparator - 'nl'
But im getting error in Receiver File Adapter as - fieldSeparator not specified.
i would be greatful if any one help me.
Regards
Rajesh

Hi Rajesh,
There are lot of blogs which explain File Content Conversion in different scenarios:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
I hope this helps.
Regards.
Praveen

File Adapter - Content conversion parameters at Receiver

Hi all,
I'm trying to translate a XML message to a text line file.
My XML message is this:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Proveedor_100011 xmlns:ns1="http://sap.com/xi/webservices/buyordint">
<config>
<directory>c:/tmp</directory>
<filename>dynamicFile3.txt</filename>
</config>
<root><string>Header;423423</string>
<lines>
<value>LINE;</value>
</lines>
</root>
</ns1:Proveedor_100011>
I only want to write to text file the "root" TAG content.
I try different "Content conversion parameters" in the integration builder (configuration)
For example:
RecordSet Structure: root
root.addHeaderLine 0
root.fieldSeparator ;
root.endSeparator ;
but the better result is all XML content.
Can someone tell me how to skip "Config" TAG and only write the "ROOT" one?
I'll apreciate any help.
Thanks in advance,
Diego.

Hi Sravya,
I've tried again without better luck.
I change the root element of my message from
Proveedor_100011 to Proveedor100011. (removed underscore)
I created the next message as in your weblog:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/webservices/buyordint" targetNamespace="http://sap.com/xi/webservices/buyordint">
<xsd:element name="Proveedor100011" type="Proveedor100011" />
<xsd:complexType name="Proveedor100011">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
54650790d48f11dab96c001438eb3b44
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="root">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f20d48e11dab854d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="head" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f21d48e11da8f1dd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="rows" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f22d48e11da894ad06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f23d48e11dab889d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="filenode">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f24d48e11daab91d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="filename" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f25d48e11da8becd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="filepath" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f26d48e11dac56cd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
<Proveedor100011>
<root>
<rows>
<value></value>
</rows>
</root>
<filenode>
<filename></filename>
<filepath></filepath>
</filenode>
</Proveedor100011>
I've tried to set "Recordset Structure" in file adapter configuration to "root,filenode" and to "Proveedor110001, filenode" but no output is writed
We are using XI version: SAPKB64015, which version did you use in your weblog?
Thanks and regards,
Diego.

Problem with end seperator in file content conversion parameters

Hi All
I have a proxy to file scenario, and i am writing the file using file content conversion.
In my message type, there can be multiple object records in a single data record, as shown here:
<Data_Record>
<Field1>111</Field1>
<Field2>222</Field2>
<Object_Record>
<Field3>333</Field3>
<Field4>444</Field4>
</Object_Record>
</Data_Record>
Recordset Structure: Data_Record, Object_Record
Content conversion parameters:
Data_Record.fieldseperator: ,
Data_Record.end_seperator: 'nl'
Object_Record.fieldseperator: ,
Object_Record.end_seperator: 'nl'
My requirement is, every data record should be followed by new line character and every object record should be followed by new line character:
111,222(new line character)
333,444(new line character)
But, my current output is:
111,222,333,444(new line character)
The problem is, as the data record ends only after object record, i am getting new line character only after object record. (technically, the end tag of data record occurs only after the end tag of object record).
Now, how can i get a new line character after data record and after object record?
Thanks
Chandra

Hi Sekhar,
We know the input which you are trying to use(in XML ).
Can you please tell us the output which you are expecting here after using ContentConversion at receiver side.
Regards,
Prakash.

Configuring unicode charcterset for fixed length control file

Hi all,
we are setting our control file to support any language characters while data loading, we all set with our database configuration , need to configure our control file which is fixed length, we are using CHARACTERSET UTF8 and and also tried with CHARACTERSET AL32UTF16, its working fine for variable length control file but for fixed length the foriegn charecers like latin-I,greek, danish charactrers are taking more byte and affecting to next position data. and our data file is in UTF8 (not in regular ANSI formatt).
please advise
here is our control file example:
options (errors=999,SKIP=0)
Load DATA
CHARACTERSET UTF8
append
INTO TABLE TABLE_NAME
TRAILING NULLCOLS
field_name1 position(1:30) "trim(:fiels_name1)",
field_name2 position(247:306) "trim(:field_name2)",
)

I think you should move thread to: {forum:id=732}.

Reciever Comm. Channel Content conversion parameter for deep level

I am doing a scenario from SAP to Legacy sytem ( Proxy to File Scenario).Target File to be generated is of for fixed length.
__My source strucure is as follows:__
DT_Source
--->Root_IS .......................................0.to..1
DC..............................................0..to..1.............................xsd:string
>Root_VT....................................0..to..unbounded
POY....................................0..to..1.............................xsd:string
PON....................................0..to..1.............................xsd:string
>Root_VR............................0..to..unbounded
POL.............................0..to..1.............................xsd:string
SF----
0..to..1.............................xsd:string
Here DT_source is Data type name,
Root_IS is structure under this we have one field DC,
Root_VT is second field of Root_IS but act a a Stucture for fields POY and PON,
Root_VR is a field of Root_VT but act as a structure for Fields POL and SF.
__My targert strucure is as follows:__
DT_Target
>Root_IS.......................................0.to..1
Key..............................................0..to..1.............................xsd:string
DC..............................................0..to..1.............................xsd:string
>Root_VT....................................0..to..unbounded
Key..............................................0..to..1.............................xsd:string
POY....................................0..to..1.............................xsd:string
PON....................................0..to..1.............................xsd:string
>Root_VR............................0..to..unbounded
Key..............................................0..to..1.............................xsd:string
POL.............................0..to..1.............................xsd:string
SF----
0..to..1.............................xsd:string
>Root_ZS............................0..to..1
Key..............................................0..to..1.............................xsd:string
Count...........................................0..to..1.............................xsd:string
Here DT_Target is data type for file reciever.In which i need to configure reciever communication channel with file content conversion parameters.File needs to be generated is of fixed length.Root_IS,Root_VT,Root_ZS are sructure on same level and Root_VR sructure is under Root_VT.
I tried to Configure File Content Conversion Parameters on reciever Comm Channel but getting comm channel error as follows:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'VR')', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'VR')', probably configuration error in file adapter (XML parser error)'
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'VR')', probably configuration error in file adapter (XML parser error)'
File content parameters i used as follows:
Root_IS.fieldNames                                      : Key,DC
Root_IS.fieldFixedLengths                           :(as per length mentioned)
Root_IS.endSeparator                                 :'nl'
Root_VT.fieldNames                                   :Key,POY,PON
Root_VT.fieldFixedLengths                        :(as per length mentioned)
Root_VT.endSeparator                              :'nl'
Root_VR.fieldNames                                  :Key,POL,SF
Root_VR.fieldFixedLengths                       :(as per length mentioned)
Root_VR.endSeparator                             :'nl'
Root_ZS.fieldNames                                 :Key,Count
Root_ZS.fieldFixedLengths                      :(as per length mentioned)
Root_ZS.endSeparator                            :'nl'

Please consider this one as new: i tried to explain it more as on privew everything gets shaked
I am doing a scenario from SAP to Legacy sytem ( Proxy to File Scenario).Target File to be generated is of for fixed length.
__My source strucure is as follows:__
DT_Source
--->Root_IS .......................................0.to..1
DC..............................................0..to..1.............................xsd:string
>Root_VT....................................0..to..unbounded
POY....................................0..to..1.............................xsd:string
PON....................................0..to..1.............................xsd:string
>Root_VR............................0..to..unbounded
POL.............................0..to..1.............................xsd:string
SF----
0..to..1.............................xsd:string
Here DT_source is Data type name,
Root_IS is structure under this we have one field DC as a child,
Root_VT(structure) is second field of Root_IS but act a a Parent Stucture for fields POY and PON,
Root_VR(structure) is a field of Root_VT but act as a Parent structure for Fields POL and SF.Means we have three structres Root_IS and under this we have Root_VT and under this we have Root_VR
__My targert strucure is as follows:__
DT_Target
>Root_IS.......................................0.to..1
Key..............................................0..to..1.............................xsd:string
DC..............................................0..to..1.............................xsd:string
>Root_VT....................................0..to..unbounded
Key..............................................0..to..1.............................xsd:string
POY....................................0..to..1.............................xsd:string
PON....................................0..to..1.............................xsd:string
>Root_VR............................0..to..unbounded
Key..............................................0..to..1.............................xsd:string
POL.............................0..to..1.............................xsd:string
SF----
0..to..1.............................xsd:string
>Root_ZS............................0..to..1
Key..............................................0..to..1.............................xsd:string
Count...........................................0..to..1.............................xsd:string
Here DT_Target is data type for file reciever.In which i need to configure reciever communication channel with file content conversion parameters.File needs to be generated is of fixed length.Root_IS,Root_VT,Root_ZS are sructure on same level as a first level subelements of DT_Target and Root_VR sructure is under Root_VT.
Root_IS have fileds: key,DC: Root_VT have Fields :Key,POY,PON:Root_VR have fields:Key,POL,SF and Root_ZS have Fields:Key and Counts.
I tried to Configure File Content Conversion Parameters on reciever Comm Channel but getting comm channel error as follows:----
>
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'VR')', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'VR')', probably configuration error in file adapter (XML parser error)'
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'VR')', probably configuration error in file adapter (XML parser error)'
File content parameters i used as follows:
Root_IS.fieldNames                                      : Key,DC
Root_IS.fieldFixedLengths                           :(as per length mentioned)
Root_IS.endSeparator                                 :'nl'
Root_VT.fieldNames                                   :Key,POY,PON
Root_VT.fieldFixedLengths                        :(as per length mentioned)
Root_VT.endSeparator                              :'nl'
Root_VR.fieldNames                                  :Key,POL,SF
Root_VR.fieldFixedLengths                       :(as per length mentioned)
Root_VR.endSeparator                             :'nl'
Root_ZS.fieldNames                                 :Key,Count
Root_ZS.fieldFixedLengths                      :(as per length mentioned)
Root_ZS.endSeparator                            :'nl'

Regarding content conversion parameters

Hi,
Can anyone send me a blog that completely explains in detail about each and every content conversion parameters?Need complete info about ALL those parameters
Thanks in Advance

Hi Rambabu,
Try to implement scenarios in these weblogs...it cover almost all type of scenarios
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
Also go through this :
Converting File Content in the Sender Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
Converting File Content in the Receiver Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Thanks,
Maheshwari.

Content conversion parameters for fixed length file

Similar Messages

Maybe you are looking for