File content Conversion Issuse for a Sender File Adapter
Hi All ,
I am working for a Migration project , so my File structure will be as follows
<HEADER>
<DATA1>
<DATA2>
<DATA3>
<HEADER>
<ITEM>
<ITEM1>
<ITEM2>
<ITEM3>
<ITEM>
WHERE i do have flat file will be as follows
10001,20081902,US
10,soda,1
30,soda,4
40,soda,5
10002,20081902,US
10,steel,1
30,steel,4
40,steel,5
how to pick this file using FCC from sendere flat file adapter without keyfields , and i can use fixed length also
Sridhar,
You can use a work around like this. Create a generic Data Type something like below.
<Message Type>
<Recordset> - root node
<ROW> - element with occurence 0..unbounded
Now create an outbound MI with the above MT, in FCC in sender file adapter, give Recordset structure as ROW, *
This way , you will read the entire file inside XI as an XML like below
<ROW> header record </ROW>
<ROW> item record 1 </ROW>
<ROW> item record 2 </ROW>
<ROW>....</ROW>
In XI , since your header row & item rows are fixed length, now, you can use that in a UDF in your message mapping , or parse the xml using DOM parser in Java mapping, you should be good. Hope this helps.
~Saravana
Similar Messages
-
FIle Content Conversion Problem in IDOC-XI-File Scenario
Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like <b>%store_code%_%current_date%_sitemaster.xml</b> , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,<b>we have to suppress the current_date node of the xml content</b> . i have tried to suppress the current_date using these <b>DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut</b> , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
PrabhatIf u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy -
Complex file content conversion in case of CSV file
Hi Friends,
What you see below is generated from Excel i.e excel file saved as CSV file. This file i need to map in XI.
Problem is i have to take only the data and not the header part.
for e.g in this particular line
Employee ID :,,E00315
I need only E0315 and not the header value. Similarly i have to find some solution to map all the required data.
Please suggest me how to use file content conversion in such scenarios.
Solution is required on top priority. Points will be immdly rewarded.
Thanks & Regards
K.Ramesh
,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee ID :,,E00315,,,Sale Order No / Line Item :,,,SO123456,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Employee Name :,,K.RAMESH,,,Client Name :,,,NCLIENTELE,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Month / Week :,,Jul-08,,,Project Name :,,,Internal Project,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sales Team :,,,,,Project Role Start date :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Location :,,BANGALORE,,,Project Role End date :,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Sl. No.,Date,Day,AA Type, Task Description,,,,,No.of Hours,Remarks,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,7/1/2008,Tue,0814-Talent acquitision,task 1,,,,,12.00,rmk 1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
2,7/2/2008,Wed,0814-Talent acquitision,task 2,,,,,10.00,rmk 2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
3,7/3/2008,Thu,0814-Talent acquitision,task 3,,,,,12.00,rmk 3,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
4,7/4/2008,Fri,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
5,7/5/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
6,7/6/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
7,7/7/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
8,7/8/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, , , ,,,,,,,,,,,,,,,,,,,,
9,7/9/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
10,7/10/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
11,7/11/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,, , ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
12,7/12/2008,Sat,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
13,7/13/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,
14,7/14/2008,Mon,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15,7/15/2008,Tue,0900-Paid leave,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
16,7/16/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
17,7/17/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
18,7/18/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19,7/19/2008,Sat,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
20,7/20/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
21,7/21/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
22,7/22/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
23,7/23/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
24,7/24/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
25,7/25/2008,Fri,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
26,7/26/2008,Sat,0814-Talent acquitision,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
27,7/27/2008,Sun,0950-Holiday,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
28,7/28/2008,Mon,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
29,7/29/2008,Tue,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
30,7/30/2008,Wed,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
31,7/31/2008,Thu,0804-Development,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Prepared By:,,,,,Approved By:,Company Project Manager,,,,Client Project Manager,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Name,,K.RAMESH,,,Name,YYY,,,,ZZZ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Signature,,,,,Signature,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Date ,,31.07.2008,,,Date ,31.07.2008,,,,31.07.2008,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,Hi,
In this CSV file, what all i need is the value E00315 after the label Employee ID. I used in FCC the parameters u asked me to do. Also in the Document Offset i gave value 3 so that the first three lines are ignored.
1,,,Time Sheet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Ref. No: T-PRO-01-011,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,,,,,,,,,,,Page No.: 01,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1,Employee ID :,E00315
But still i am getting the error
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 4 according to structure 'tims_header':java.lang.Exception: ERROR in configuration / structure 'tims_header.': More elements in file csv structure than field names specified!
Please help.
Thanks
Ramesh -
File Content Conversion--- Removing Quotations from csv file
I have a csv file in the folowing format:
field1,field2,field3,field4
"111","222","333","444"
"aaa","bbb","ccc","ddd"
Suppose the header name is row in IR.
While configuring the sender file adapter in XI, i have given following parameters under file content conversion.
row.fieldNames=field1,field2,field3,field4
row.fieldSeparator=","
row.processFieldNames=fromConfiguration
row.beginSeparator="
After picking up the XML file XI processes the data so that we have out put as
row
field1 111
field2 222
field3 333
field4 444"
row
row
field1 aaa
field2 bbb
field3 ccc
field4 ddd"
row
My Problem is what parameter should I add in ID to remove this last quote say 444" and ddd" from the XML message ????
I tried using
row.endSeparator=" but it is still giving the same output.
Can anyone help ????????????????????????Hi,
Try this FCC instead
row.fieldNames=field1,field2,field3,field4
row.fieldSeparator=,
row.processFieldNames=fromConfiguration
row.enclosureSign=u201C
row.enclosureSignEsc=u201Cu201C
row.endSeparator='nl'
http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
If you specify xml.enclosureSign=u201C and xml.enclosureSignEsc=u201Cu201C, text enclosed in quotation marks is transferred unchanged and the quotation marks are removed.
Thanks
SaNv... -
File Content Conversion in PI 7.1 (file to Proxy)
Hi
I am working on a file (text) to Proxy scenario in PI 7.1 version, where I receive the file as shown below
1. Record is header
2. 2nd and 3rd records are Details with the different formats
3. Last Record is trailer
File will have the 2nd and 3rd records sequentially, ex file will have 2nd format, 3rd record format, 2nd record format, 3rd record format, 2nd record format, 3rd record format like that
0200
1BFKKOPKC_C MC -20090803-01MC 5444002244564364 2009073000000000BOSTON RED SOX
2BFKKOPKD_C MC -20090803-0190000000006520090112
1BFKKOPKC_C VISA-20090803-01VISA4011080000404419
2BFKKOPKC_C VISA-20090803-01VISA4011080000404416
1BFKKOPKC_C VISA-20090803-0190000000006620090112
2BFKKOPKC_C VISA-20090803-0190000000006720090112
1BFKKOPKC_C VISA-20090803-01VISA4011080000404450
2BFKKOPKC_C VISA-20090803-01VISA4011080000404450
3BFKKOPKS_C 5,500.00-USD 5
4BFKKOPKS_C 5,500.00-USD 5
Can anyone let me know what are the parameters needs to be declared in the file content conversion, and how to process the file if the file contains different formats sequentially
Thanks a lot for the input
PRPR ,
You would be needing these ones.. :
NameA.fieldNames
NameA.fieldSeparator.
NameA.endSeparator
NameA.fieldFixedLengths (this one not sure though....depends upon ur req,..)
Regards,
Edited by: Santosh Rawat on Aug 10, 2009 11:17 AM -
File Content conversion - IDOC to Fixed length File
Hi,
Scenario : SAP R/3(IDOC) -> XI -> Fixed Length file
IDOC is sending from SAP R/3, XI has to do the mapping and send a Fixed length File to /tmp in XI.
When I am using the message Protocol as "File" in the Receiver communication channel, XML file is writing to /tmp. When I am using "File Content Conversion" as a message protocol,Empty File is writing. Can anybody tell me why empty file is creating. Can we use File content Conversion in this scenario. Is there any additional parameter or settings required?
Receiver communication channel settings:
Message Protocol: File Content Conversion
File type : Binary
Recordstructure : MT_V_PER01
Name Value
MT_V_PER01.fieldFixedLengths 25,35
MT_V_PER01.fieldNames PERSNR,NAME
File Data Type : DT_V_PER01,
Message type : MT_V_PER01
IDOC type : WP_PER01.
Expecting your expert advice.
Thanks
vineeshHi Moorthy,
I am getting success messages in Audit log as below:
2006-09-29 12:08:53 Success Trying to put the message into the send queue.
2006-09-29 12:08:53 Success Message successfully put into the queue.
2006-09-29 12:08:53 Success The message was successfully retrieved from the send queue.
2006-09-29 12:08:53 Success The message status set to DLNG.
2006-09-29 12:08:53 Success The message was successfully transmitted to endpoint http://nslcxi08:8010/sap/xi/engine?type=entry using connection AFW.
2006-09-29 12:08:53 Success The message status set to DLVD.
2006-09-29 12:08:53 Success The message was successfully delivered.
I have checked the Payload maindocument,the IDOC structure contains data.
<?xml version="1.0" encoding="UTF-8" ?>
- <WP_PER01>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<IDOCTYP>WP_PER01</IDOCTYP>
<MESTYP>WP_PER</MESTYP>
<STDMES>WP_PER</STDMES>
<SNDPOR>SAPLCD</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>LCDCLNT210</SNDPRN>
<RCVPOR>LXDCLNT250</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>LXDCLNT250</RCVPRN>
</EDI_DC40>
- <E1WPP01 SEGMENT="1">
<PERSNR>0000100006</PERSNR>
- <E1WPP02 SEGMENT="1">
<NAME>Consumer</NAME>
</E1WPP02>
</E1WPP01>
</IDOC>
</WP_PER01>
Thanks
Vineesh -
File Content Conversion - Creating Mulitple structured Flat Files
Hello,
I am trying to create a flat file using File content Conversion.For simple XML strcutures like
<Header>
</Header>
<Item>
</Item>
<Trailer>
</Trailer>
the file content conversion works fine. But whe the XML structure gets complicated like
<Header>
</Header>
<Item>
<Item_Detail>
</Item_Detail>
</Item>
<Trailer>
</Trailer>
or
<Header>
</Header>
<Item>
<Item_Detail_1>
<Item_Detail_2>
</Item_Detail_2>
</Item_Detail_1>
</Item>
<Trailer>
</Trailer>
I am not able to create the correct flat file with the Item_Detail information.How can I do the same ?
Regards,
Sandeepwell same in the receiver side too....
REF: http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
and sorry abt the earlier blogs, u can chk out the one below ....
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion -
Content conversion parameters for fixed length file
Hi,
Hey i have a small doubt.My input is like this
99443 123213 232234 12312 127544 23423
Here i have four recorsetnames namely HEADER1,HEADER2,HEADER3,HEADER4,HEADER5,HEADER6 all the recordsets are of same size but the lengths of the fields in it vary so i specified the following parameters
HEADER1.fieldFixedLengths=1,3,1
HEADER1.fieldNames=value1,value2,value3
HEADER1.endseperator=" "
HEADER2.fieldFixedLengths=1,3,2
HEADER2.fieldNames=value1,value2,value3
HEADER2.endseperator=" "
MY OUPUT XML STRUCTURE SHOULD BE like this
<header1>
<value1>9<\value1>
<value2>944<\value2>
<value3>3<\value3>
<\header1>
<header2>
<value1>1<\value1>
<value2>232<\value2>
<value3>13<\value3>
<\header2>
Is the content conversion parameters i specified enough for that. I wanted to know how would it know the begin of the next recordset(ie the seperation between the two recordsets) .Please help me its vey urgent
Thanks in advance
SriandhAre header 1 fields always going to occur first , then header 2 and so on?
By default file adapters do not support Nested Strcutures and so if the sequence is going to be the same and all of these have an occurence of 1..1 then things will work.
But if there is going to be an occurnece of * then you will need to use KeyFields.
Regards
Bhavesh -
Required help for Identifying diff. items in file content conversion.
Hi All,
I've to use a file content conversion parameters for a .txt file in which there are two objects. One is a header and the other is a item detail.
How do we get or mark the difference between both so that XI recognizes the particular line is a Header and the other is a Item detail
Thanks in Advance.
Regards,
Sree.Hi
Make use of a field which is common to header and item line which will always hold different values for header and item. Or otherwise if possible, add an extra field in the header and item lines, say 'Key' and use it in the 'Key Field Name' parameter in the adapter configuration. See this for details - [File Content Conversion for Complex Structures|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/].
Regards,
Riyaz -
Sender Adapter File Content Conversion - question
Hi!
Could you help me to make xml-file from csv?
I have file like:
12345#254#9765#89654
55#9066#77127#47
And i need file like:
<dealings>
<deal>
<field1>12345</field1>
<field2>254</field2>
<field3>9765</field3>
<field4>89654</field4>
</deal>
<deal>
<field1>55</field1>
<field2>9066</field2>
<field3>77127</field3>
<field4>47</field4>
</deal>
</dealings>
I haven't key fields - all fields are accidental. And lengths of all fields are accidental.
How to put content conversion parameters?
Thank you.HI
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
File content conversion sites
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
XI in the role of a FTP
XI in the role of a FTP
File content conversion sites
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
cheers -
Unequal Number of rows for File Content Conversion
hi xi friends,
in my idoc to file ..
please help me in content conversion parameter for unequal number of rows .
the message type for external system..
root
row1
f1
f2
f3
row2
f4
f5
row3
f6
if i send idoc with data for all three rows
the resultant txt file
f1-valuef2-value f3-value
f4-valuef5-value
if i send idoc with data for row1 and row3
the resultant txt file
f1-valuef2-value f3-value
f6-value
if i send data for row2 and row3
the resultant txt file
f4valuef-5vaue
f6-value
in static message mapping ,i eleminated the rows which are not getting the data from idoc
eg:if the data for row2 does not exist ,then i elimated in message mapping.
all the fileds are fixed lenths like f1 3char and f2 8char etc..
and i dont require header names.
please guide me how to declare in Content Conversion for this unequal number of rows of fixed lenth columns.
regards
MunnaHi Jai,
Thanks alot for your responses..
message mapping look like this,
IDoc-------------------root
segment1-------------- row1
f1------------------- f1
f2------------------- f2
f3------------------- f3
segment2--------------row2
f4------------------- f4
f5------------------- f5
segment3--------------row3
f6------------------- f6
(actually the idoc contains no of segments..i provided sample one above)
test data for f1=1111 f2=AAA f3=ccccc f4=222 f5=BB f6=33
all fields are fixed lenths
if idoc contains all three segments data
then reultant .txt file should be
1111AAAccccc
222BB
33
if idoc contains segment1 and segment3 data
then reultant .txt file should be
1111AAAccccc
33
if idoc contains segment2 and segment3 data
then reultant .txt file should be
222BB
33
in message mapping I eleminated the target message type segments
if that idoc doent contain data.eg:if the idoc doent contain data for segment2,
i eleminated in message mapping.
please guide me how to declare File content conversion parameters for this unequal number of rows
of rows.
regards
Munna -
Send a file without File Content Conversion
Hi,
I need to send an IDOC flat file that I pick from File system to a FTP server through XI. I was just wondering if there was a way by which I could avoid doing File Content Conversion on both the send and receiver file adapters?
In my scenario, I am just passing this file through XI. I am not making any changes to it but to send it thru XI, I will have to convert from flat IDOC file ( file generated from File port in ECC) to XML and then from XML to Flat file.
Can anyone guide??Hi William,
<i>As a matter of fact, <b>no IR object is needed</b>. You can make up any interface name and namespace in the ID.</i>
This sounds interesting..!!
Can I just note down the steps in this case and can you validate the same..
1. No IR objectd needed.
2. File adapters ~~ Both sender and reciver , make the protocol as FILE
3. Receievr Determination , Interface determination , Sender Agreement , Receiver Agreement ~~~ Give dummy Interface as well as Namespace values?
Regards,
Bhavesh -
Problem with File content conversion and parameters
Hi experts,
What is the use of file content conversion that is available in file adapter? For what cases we can use it?
What do the different content conversion parameters mean?
Kindly help
Thanks
GopalHi,
We use the file content convertion to conver the flat file that is text file into XML,
File adapter cant understand the format the file is,so we have to declare the content convertion parameters.
Check some links which will tell how the convertion is done.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if helpful -
Regarding file content conversion and jdbc adapters
hi
can any one send me the details about the sender jdbc adapter and the receiver jdbc adapter.
i need the output of sender jdbc adapter(structure)also fro the receiver jdbc adapter.
for file content conversion -
can any one send abt the sender and receiver of the FCC adapter.
also provide some links abt these in blogs.
thanks in advance .Hi..
You can search those links in SDN.
FILE to JDBC Adapter using SAP XI 3.0 --Receiver Jdbc adapter .
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/jdbcTOJDBC& ---for both sender and receiver jdbc adapter configuration
Content Conversion (Pattern/Random content in input file) ---for FCC
Regards,
Leela -
Hi,
I am using SP 12 of XI. I am able to see the File Content conversion option in the Sender communication channel but not able to see the option in the Receiver Communication channel.
Could anyone please suggest a solution?
Regards,
KaranHi,
I cannot see the option in the Message Protocol only.
I can only see the option File in the Message protocol for the Receiver Communication Channel and NOT File Content Conversion option.
However, I am able to see the option in the Message Protocol for the Sender Communication channel for the file adapter.
Regards,
Karan
Maybe you are looking for
-
Query-Paid Time Off (PTO)
Hi, I am working on Time Management. I have a query. I need to set the PTO (Paid Time Off) right wherein the Details given as under:- Scenario:- 1) Length of Service=0-0.99 Accrual hours per pay period=4.01 Yearly Equivalent= 96 Hours Maximum Hours o
-
I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.
-
Installing SAP R/3 4.6C SR 2 on Oracle 10.2 On HP-UX 11.31 Platform
Dear Expert, I want to migrate our old SAP system 4.6C from HP-UX 11.31 and using Oracle 10g. The export process has be done successfully. When I tried to install the central instance, the problem occur. After run command ./R3SETUP -f CENTRAL.R3S in
-
Every time I try and convert a document, I get an 'unexpected problem' error message
The files I am trying to convert are 60MB (less than the 100MB limit referred to in the troubleshooting), and have no security locks on them. When I try and convert a file with the online tool, it uploads quickly, then spends a few minutes trying to
-
Forgot login for Mavericks and had to use start up disc. Now can't access keychain
OK, somehow stupidly forgot my login and had no other way to access my iMac except satr up disc. Well, after successfully changing my login, I keep getting pop ups to use several keychains, yet the new password does not work. Half of my apps wont wor