Context at design time and run time

Hi,
Can anyone tell me what is the difference between context at design time and context at run time?
Regards
V. Suresh Kumar

The structure of context is usually defined at design time while context node and attributes are created at runtime based on the design. However, it is possible to modify the contents of context as well as to alter its structure at runtime too. To help understand it better, see these 2 online presentations.
1.  [The context at design time|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f059fe81-90f2-2a10-9593-cda1645f0020].
2. [The context at run time|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a015df6f-28f3-2a10-0291-e8e5c8aeb1bd].
Hope it helps,
Vishwas.

Similar Messages

  • Syncing design time and run time view in WPC

    Hi,
         We use WPC to develop web content. Especially when we use the table control provided in the Htmleditadvanced(advanced paragraph) component for creating web content the size of the font that is displayed in design time is very big. We do control the font size at run time by altering the font style available in the /etc/wpceditor/runtime/styles folder. But a the same time we are unable to alter the font style at designtime so that we can have the design time in sync with run time when the page is previewed. We did try exploring the css files available in /etc/wpceditor/designtime/styles folder, but was not of any use.
    Any pointers will be appreciated.

    Hi ulahoti,
    Welcome to our forum, I have downloaded your "Basic Project", I think it looks well after change
    <Border
    CornerRadius="20" Background="Black"
    Padding="8">
    <Border
    CornerRadius="20" Background="White"
    Padding="8">
    <GroupBox
    Header="Fading Mode" Background="White">
    <Grid>
    <Grid.RowDefinitions>
    <RowDefinition
    Height="*"/>
            <RowDefinition
    Height="Auto" />
    </Grid.RowDefinitions>
    to:
    <Border
    CornerRadius="20" Background="Black"
    Padding="8">
    <Border
    CornerRadius="20" Background="White"
    Padding="8">
    <GroupBox
    Header="Fading Mode" Background="White">
    <Grid>
    <Grid.RowDefinitions>
    <RowDefinition
    Height="Auto"/>
            <RowDefinition
    Height="Auto" />
    </Grid.RowDefinitions>
    If your issue persists, or I have misunderstood your concern, please let me know, and share your
    main concern
    with me, then I will do my best to resolve your issue.
    Best regards,
    Sheldon _Xiao [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Setting Property at design time and run time differ outputs

    On AI OCX Object I have set property in BUFFER>>Number of Scan to acquire = 600, Allocation Mode = Host Memory, Return data type = scaled data only And in Clock >> Clock=Scan, Clock Sourec Type = Internal,Scan/Second = 600 And in CONDITIONS>> Condition=Stop and Continuous..
    But when I want to set them at runtime I am not getting proper output
    I have defined at runtime...
    CWAI1.NScans = 600
    CWAI1.ScanClock.Frequency = 600
    CWAI1.AllocationMode = cwaiHostMemory
    CWAI1.ScanClock.InternalClockMode = cwaiFrequency
    CWAI1.ScanClock.ClockSourceType = cwaiInternalCS
    CWAI1.UseDefaultBufferSize = True
    CWAI1.Configure CWAI1.start
    Please guide me ... where I am gettin
    g wrong
    Best Regards"

    Hmmm, it looks like everything you have is correct. Except that it appears you haven't specified the channels you want to acquire from. I would expect to see something like this:
    CWAI1.Channels.RemoveAll
    CWAI1.Channels.Add "1,2,3"
    I have attached one of the shipping examples that also programatically specifies the properties. You might use it as a comparison to your code. I hope this helps.
    Regards,
    Russell
    Attachments:
    FiniteAcquisition.zip ‏4 KB

  • LTP run ignoring GR processing time and Lead time

    Hi,
    I am trying to find out way to create a planning scenario (MS31) and run LTP (MS01) which will ignore the GR processing times and Lead times from Material master.
    I would like to use MCEC report (after running MS70 valuation) which will show the values only in my new fiscal year - for budgeting purposes. Currently because of the long GR processing times and Lead times in material master (sometimes even 60 days) - some planned values show in MCEC report 2 or 3 months before the new fiscal year and the last two periods of new fiscla year are empty.
    I would be grateful if you could help me with getting rid of these additional Times and adjusting the periods only for Report purpose. The desired final output should be that S012 table for this specific planning scenario has the values only in periods of the Fiscal year - without hitting previous Fiscal year last periods (due to lead /GR processing times).
    Thank you,
    Karol
    Edited by: Karol on Oct 12, 2010 2:50 PM

    Dear,
    Master data is taken from normal MRP views. there is no other setting is available. you can create a different matrerial number for LTP planning.
    Raj

  • Big-Oh Notation,algorithm-analysis and running time - aagh headache!

    Hey folks,
    I was reading about the Big-Oh Notation, algorithm-analysis and running time.
    Now, it's all probably very nice - if you get to understand it. Which I don't! Gives me headache! lol
    And we're having an exam soon. Hmm. Could someone please help to explain it a bit better please?
    Oh and by the way, one of the examples mention something about T(N), which I presume is running time for the size of a problem.
    So it said:
    "? Running time of a loop =
    time taken by the body statement * size of the loop
    ? Example
    for ( i = 1; i <= N; i ++)
    c = c + 1;
    ? body statement takes O(1), the size of the loop is N
    ? So, this loop has running time T(N) = N * O(1) = O (N).
    ? More precise ?
    ? i = 1 takes 1 time unit
    ? Body statement takes 2 time units
    ? i <= N takes 1 time unit, i ++ takes 1 time unit
    ? Totally T (N) = 1 + 1 * (N +1) + 2 * N + 1 * N = 4N + 2 = O(N)
    init condition body update
    Nested loops
    ? Nested loops: Analyze them inside out
    time take by body statement of innermost loop *
    product of the size of all the loops
    ? Example:
    line 1 for ( i = 1; i <= N; i ++)
    line 2 for ( j = 1; j <= N; j ++)
    line 3 k++;
    ? line 3 is the body statement in the innermost loop (for-j): takes
    O(1).
    ? size of for-j: N
    ? size of for-i: N
    ? So the running time for this nested loops: N*N*O(1) = O(N2 )"
    Please help me! I don't understand much of this.
    Best Wishes!

    Ok. I'll have a look about it - but the question I
    had was... like...
    what exactly is it that takes N steps? How do I know
    what takes O(1) steps
    and N steps?Depends on what you're doing. Example: adding an item to a linked list of N elements will always take the same effort: attach it to the end. Whether the list already has 0, 10 or 1000 elements doesn't matter. O(1).
    If you want to try and find the maximum value in an array of numbers, you need to look at each number in there. So an array with 1 number takes one look, an array with 100 numbers needs 100 looks and an array with N members needs N looks. O(N).
    Does the parametres themselves take a step each? How
    many steps does the body (as far as I've understood
    it, it's c = c + 1; which is the body) take? And how
    long time does it take?That body takes only one step. The question is whether you want to account for the repetition or not. If you don't, it's O(1) . There is no N to take into account. If you count in the repetitions too, you end up with an N - the number of times you call the body. So the effort O to run the body once is O(1), the effort to run it N times using the loop is O(N). It really depends on what the actual action is you want to look at.

  • MBP 17" Battery Capacity and Run Times : Survey

    I've had 2 MBP 17's so far, and I'd like to get a general idea from everyone about their battery capacity and run times they are experiencing.
    My first MBP17 had a Full Charge Capacity of ~5900mAh before calibration and PMU reset, and 6800mAh after. This translated to about 3:40 of run time under light load.
    My current MBP17 had a Full Charge Capacity of ~5899mAh before calibration and PMU reset, and 6942mAh after (currently). This translates to about 3:48 of runtime....still trying to get some more real-world run time numbers under different loads.
    This proves to me that it is quite critical to calibrate your battery and reset your PMU at least once to ensure that your battery is reporting it's correct capacity. I'd be interested to know what everyone else's batteries are reporting.

    I've had 2 MBP 17's so far, and I'd like to get a
    general idea from everyone about their battery
    capacity and run times they are experiencing.
    My first MBP17 had a Full Charge Capacity of ~5900mAh
    before calibration and PMU reset, and 6800mAh after.
    This translated to about 3:40 of run time under light
    load.
    My current MBP17 had a Full Charge Capacity of
    ~5899mAh before calibration and PMU reset, and
    6942mAh after (currently). This translates to about
    3:48 of runtime....still trying to get some more
    real-world run time numbers under different loads.
    This proves to me that it is quite critical to
    calibrate your battery and reset your PMU at least
    once to ensure that your battery is reporting it's
    correct capacity. I'd be interested to know what
    everyone else's batteries are reporting.
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 6864
    Remaining Capacity (mAh): 6862
    Amperage (mA): -469
    Voltage (mV): 12436
    Cycle Count: 2
    William

  • In Material Master Screen,functionally what is Safety time and safety time

    In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

    Hi,
    The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
    The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
    Prerequisites
    ·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
    ·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
    ·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
    Regards,
    Vijay

  • Hide the start time and end time in ESS portal

    Experts,
    We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal.  I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
    Please Advise.
    Best Regards,
    Martin Weakley

    Hi Martin,
    you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
    maybe this helps or gives you a helpful alternative to the already stated measures in this thread
    regards, Lukas

  • How to know the process chain start time and end time

    Hi Experts,
                   How to know the process chain start time  and end time .
    Thanks in advance
    Regards
    Gutti
    Edited by: guttireddy on Feb 23, 2012 11:30 PM

    Hi Reddy,
    You may find the run time of a PC using below steps.
    1. Call SE38 > /SSA/BWT > Execute  > Enter your PC , choose the date and time > Execute. Here Run-time of a PC is displayed. (or)
    2. Call RSPC1 > Enter your PC > Execute > Goto Log view > Right click on the start Variant > Displaying Messages > Note down the start time in Chain Tab. Now Right click on the last Process type of the PC > Displaying Messages > Note down the End time in Chain Tab. The Difference b/w start time and end time gives the Run-time of your PC.
    Hope this helps.
    Regards
    Sai

  • I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

    I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

    I'm afraid not.    It's not rocket science but you need to do some coding. 
    You'll need to find a script (php) and save it to your local site folder.  Then reference the script in your form's action attribute like so.
         <form action="path/form-to-email-script.php" >
    The input fields in your HTML form need to exactly match the script variables. 
    I'm  assuming you're hosted on a Linux server which uses PHP code.  Linux servers are also case sensitive, so upper case names are not the same as lower case names.  It's usually best to use all lower case names in your form and script to avoid confusion.
    Related Links:
    Formm@ailer PHP from DB Masters
    http://dbmasters.net/index.php?id=4
    Tectite
    http://www.tectite.com/formmailpage.php
    If this is all a bit beyond your skill set, look at:
    Wufoo.com (on-line form service)
    http://wufoo.com/
    Nancy O.

  • ESS Working Time - Start Time  and End Time in Weekly View

    Hello,
    I'm having a problem with the business package ESS - functionality Working Time (cat2).
    I need that information to Start Time and End Time appear in the Weekly View of the portal.
    In Daily View that information are already visible, but In Weekly View that information does not appear.
    Does anyone have any suggestions?
    Thank you very much your attention.
    Att,
    Jair de Oliveira Junior

    Hi Bala
    You can have clock in and clock out in a weekly view.
    you have to change the data entry profile settings.
    In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
    And you can view the weekly entry in clock in and clock out.
    Ravee
    +91.99206.33669

  • I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read.  I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

    I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read.  I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

    I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read.  I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

  • If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

    My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

    As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
    tt2

  • Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

    Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

    Hi Glenn,
    Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
    Try Solution 2: Clean up cached user login information.
    Please share the results after performing the steps.
    Thanks,
    Atul Saini

  • How to track the login time and logout times of clients

    hai
    please give me the solution
    suppose there are 5 systems connected in LAN.
    how to track the login time and logout times of clients
    for a given time(may be one day or 1 hour) using any programming language.
    please give me the solution

    When the client logs in you write the client's ID and the current time to a database. Likewise when the client logs out. Assuming of course that you have a program that knows when those events occur.

Maybe you are looking for