Continued On Next Page in XMLP Report

Hi
I am able to get "cont on next page" using word property 1)PAGES<NUMPAGES and 2)SECTION PAGES concept using below except last xdo funtion calling in footer section:
<xdofo:inline-total display-condition="exceptlast" name="contd_footer"><?LB_CONTINUED1?></xdofo:inline-total>
I have header footer and sub header/sub footer being used in my template also Different First Page.
So whenever my report is of 2 pages and my Line Table completes in the first page itself and in the second page i only print Sub Header and Sub Footer with Total table. In this case ideally "cont on next page" should come in the 1st page but I dont see that.
The probable issue is as my Line Table is completing in the 1st page itself my exceptlast condition is not working.
Please help to resolve my issue or suggest me any other alternate solution to erradicate my issue.
Appreciate your early response.
Thanks and Regards
Mahadev

You can do this by issuing the NEW-PAGE command between the two headings. Here is a proof-of-concept code.
DATA: w_heading TYPE i.
TOP-OF-PAGE.
CASE w_heading.
    WHEN 1.
      WRITE:/ 'Heading1'.
    WHEN 2.
      WRITE:/ 'Heading2'.
    WHEN OTHERS.
ENDCASE.
WRITE:/ 'columnA',
          'columnB'.
START-OF-SELECTION.
w_heading = 1.
DO 10 TIMES.
    WRITE:/ sy-index.
ENDDO.
NEW-PAGE NO-TITLE. "Check further page-options and may be spool options too.
w_heading = 2.
DO 10 TIMES.
    WRITE:/ sy-index.
ENDDO.

Similar Messages

Continued to next page

Hi All,
I have a group and sub group in the report. If the sub group records continue to next page, i want to display 'Continued from next page' and also repeat the parent group record in the continued page . I have used the following function in rtf and it does not work. Did any one have face similar issue?
<xsl:attribute name="xdofo:rowspancell-repeat-nextpage" xdofo:ctx="block">true</xsl:attribute>
Thanks,
Sushil

Hi Sushil,
This can be achieved by doing the following .
InitPT
Empnum
Empname
Salary
F EMPNUM
EMPNAME
SALARY ET E
Footer PT
EET
The image above shows the template - standard table with employee data in it. Notice the last row of the table has most of the borders turned off.
I have got 'Show Gridlines' enabled so you can see it is another row in the table. There are some other fields in there too.
Walking through the more important fields:
InitPT - <?init-page-total: contd_footer?> - initializes a page total object 'contd_footer' - for more info on this check the user guides.
ET - <?add-page-total:contd_footer;1?> - within the table, adds the total into the page.
Footer - <?table-footer:?> - an undocumented command (we had other plans for the command for a later release - hence the lack of doc) to specify that this row is the table footer. MSWord does not have a concept of table footer so we need to mark it as such for the rendering engine to 'see'. Notice its in the last row of the table - no borders remember (thats optional)
PT - <xdofo:inline-total display-condition="exceptlast" name="contd_footer">Continued ...</xdofo:inline-total> - this is the cool piece. It is supposed to render the page total, but instead it will show the string 'Continued ...' on all but the last page of the table.
EET - <?end-page-total:contd_footer?> - this closes out the page total command.
Try it out and play with it here. This approach works with 5.6.3 and above.
If this helps you then please mark the answer as "correct" or else "helpful"
-Ragul

RDLC - Group Header Continued on next page...

Hi All,
I have a requirment in RDLC, if the group rows exceeds more than one page, I need to add a content at the bottom of page and next page first row, like below
Group
             ------Recrods-----------
             ------Recrods-----------
Group Continued on next page...
----------------------------------------------------------------Next Page-------------------------------
Group Continuing from Previous page...
           ------Recrods-----------
           ------Recrods-----------
Group
         ------Recrods-----------
         ------Recrods-----------
Could you please help me out on this?
Advance Thanks,
Nava Deeban S

Hi Nava,
In your case, I think that we can try to implement another solution to deal with this issue. For example, we can reset the page number based on group and add some information on the page header.
Please refer to the image below:
For more detail information about reset page number on group, please see:
http://blogs.msdn.com/b/robertbruckner/archive/2010/04/25/report-design-reset-page-number-on-group.aspx
Regards,
Bin Long
Bin Long
TechNet Community Support

To go to prev page and next page in interactive report

Hello,
I want to make two bottoms. One bottoms to go to prev page in interactive report and other bottoms to go to next page in interactive report.
Reggads,
Amparo

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

How to put 'Continue in next page' below the table.

Hi,
I have an invoice where all the lines are not fitting into one page. So some of the lines are getting printed in the second page. But in this case I wanted to put a message below the first page as "continue on next page"
Since Iam a newbie to XML/BI Publisher I kinda stuck here. Tons of thanks in advance.
This is how I need the output
--- PAge1 --
heading1
line1
line2
line3
line4
line5
line6
line7
line8
line9
line10
Continue on next page
-- page 2--
heading1
line11
line12
line13
line14
line15
line16
line17
_________

There are so many threads for this lately,..
Go here
http://winrichman.blogspot.com/...
Here is some of the thread people were desperately looking for answers :).
how can we get "Page Continued" at footer of page.
Re: How do I print the word "Continued" at the bottom of page in BI publisher?
How to Display 'Continued' in second& subsequent page but not in last page?
Re: Printing signature on footer section of every page
Re: How to put 'Continue in next page' below the table.
Re: How do I check the last page?
Help needed in XML Publisher rtf file
Re: Different value in footer
Changing header information within a document
Re: Invoice Page break
Re: Footer information in very page
Re: Check Printing
Oops, I initially thought , there would less number of threads,
Hope my blog helps them :)

Creating long articles that continue to next page

What is the best way to create a news page where the articles may be long and continue to "next page " or 1,2,3
within MUSE
I am trying to trick the blank composition, but wonder if Iframe would work better with a small sized frame?
or inserting a php which I'm not sure about......
Anyone else have articles that "continue" to next page within a frame/box/div/ without leaving the overall structure?
Thanx
David

Hey Dave,
What you can do is just fill a webpage with content until you want it to goto the next page, duplicate the page and add the rest of the content. Then at the bottom just add a number navigation or 'Back page / Next page' buttons. It is bascially what a blog does except you won't have database and PHP to automatically populate pages, you will just do it manually.

Pages 5 Document Endnotes doesn't allow text continuation onto next page?

For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is problematic from a formatting standpoint because it wastes page space, does anyone have a workaround or suggestions?
Example:
Citation 5 is long but I would like to keep it on the same page as Citation 4 and just let the text continue onto the next page. However Pages 5 doesn't allow me to adjust the endnote text box and just jumps to the next page. Rarely do you see endnotes arranged in this manner in high-level research reports and we can't have this.

I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

Memo data type displayed half page continued on next page

Post Author: j45c
CA Forum: Crystal Reports
I am currently using crystal report IX which the memo field only displayed half of the page and continued on the next page. I have set can grow = true, keep object together = false and close border on page break = true.Would like to know how should I solve this by having the memo to filled up the rest of the page before continue display on the next page? Thanks in advance.

Yes, you can't rely on getting the last entered ID on the next page as it may not be from the same person. I use the Insert-retrieve extension from Tom Muck which does this at the time of insert and stores it in a session variable. But backing up a bit, are 4 different forms really necessary. Most expense form are able to use a single form to capture all pertinent date. I would design a single form, submit it while using the retrieve ID extension, and direct to a summary page. That page would grab the just inserted records, and perform any monetary calculations needed. Also provide a link to an update page, basically a duplicate of the input page but with a recordset and fields Pre-populated. Once it's been input, reviewed and updated if needed, then it can be emailed, printed or exported to what the accounting people need to process it. Future enhancements may include a status indicator that defaults in incomplete. When in this mode, the user can log back in at a later time to complete it. Upon final submission, the record updates to Complete which prevents the user from making further changes. You could also build an admin section for various management tasks, and to enter the status of the request, that would appear in the users profile so they can see if and when they will get paid, or notices that require more info, like receipts.

Repeating frame(s) not continuing to next page

Here is what I have:
grp 1 r-frame 1
grp2 r-frame 2
grp3 r-frame 3
grp4 r-frame 4
r-frame 5
r-frame 6
r-frame 7
grp1 r-frame 1 will not continue to the next page when I have multiple grp3
r-frame3 records (there will be 1 record for 1 of the frames under that, the others are suppressed). grp 4 has page protect and contract, grp3, grp2 and grp1 has page protect and variable. I am trying everything to get it to continue to the next page and it won't. The example is it will produce only 12 of the grp3 and underlying records when there are 36 grp3 records. Is it something really stupid that I am missing or can I get a couple of hints as to why?
thanks in advance

Hi,
I tried to understand your question and you want to continue grp-3 to next page, and you are expecting to print one grp-4 on each page along with 1,2 and 3.
The way you set the properties look fine. but what I can suggest is:
Please set all frames properties to "Vertical Elasticity to Expand" and "Page Protect to NO".
Now start setting the two properties as you like from child (most detailed) frame to top most parent frame and keep checking output for every change.
Hope you can solve this.
Regards,
Gouri Sankar

SAPScript - add 'continued' in next page.

Hi Guys,
I would like to ask on how to write 'continued' at the new page?
My SAPScript form is depend on the data that will output. When the data is exceeded from the MAIN window, it will automatically break the data to pages. So may i know how i want to write 'continued' when it breaks the data to the new page?

Thanks for the answer.
But how if i want to write 'continued' in the main window?
For example:
in my main window the output will be like this:
data 1
data 2
data 3
......(and so on)
if the 'data 2' has reach the end of the page, 'data 3' will be print in next page. I want to know how to write 'continued' before the 'data 3' be printed?
i tried to put this coding in the text element,
/E 101
/: if new page
/: continued
/: endif
&symbol&
but the out put will be like this:
continued
data 3
continued
data 4
continued
data 5
...(and so on)
The 'continued' statement will be repeating on each line of data.
Edited by: BobKur on Jun 19, 2009 9:43 AM

Next page on ACS Report = Page not found

Hi,
I have ACS Appliance Release 3.3(3) Build 11.
Everything works fine, except in the TACACS+ Accounting and TACACS+ Administration, in the Report menu.
When I try to click on the next page, it says "Page not found".
The other reports work fine.
Is there any patch that I should apply?
TIA

Sounds like an issue with CSAdmin. Could be there is some text in the 2nd page of the CSV file that is corrupt or contains HTML like stuff.
CSAdmin does its best to escape the data contained in the CSV files, but its still possible to get messed up.
Download the CSV file and check it to see it looks OK.
BTW, you can use extraxi csvsync to download CSVs via HTTP direct from the ACS to your desktop!
Darran

Pages - Table won't continue to next page

I'm new to using "Pages" and I can't seem to get the rows on the table I inserted into the page to continue to the next page despite the fact that i have no more room on that one page. Instead, if I continued to type, the information would disappear behind the footer as the row would get larger. Am I doing something wrong or is there no way for the row to continue to the next page?

Quick question before I give up on this. Can I only add tables in this manner. I am trying a simple file right now untill I understand how to do it. I create a file that contains a button (which will be used for adding an extra drop down list) and a drop down list. I did not include a second button to remove the section.
I then select the button and in the Script window add the:
// Invoke the Instance Manager to add one instance of the detail subform.
subform1._DropDownList1.addInstance(1);
//Invoke the recalculate method to include the field values from the added row in calculations.
xfa.form.recalculate(1);
So my subform is called "subform1" while my element I want to duplicate with the button is called "DropDownList1"
At this point I get confused and not sure what I need to do.

Last Line Item in Report Repeating on Next Page

The last line of data of every page is also the first line on the next page. I have not encountered this before and I cannot see how it is happening or how to correct it.
The report has three groups and the 3rd group has 3 details lines. It is the 2nd detail line that repeats. The repeating line has not encountered a group change, nor has the 3rd detail line been triggered. It is a simple report that lists a line of data and prints it onto the report.
The SQL is grouped by the same grouping of the report. Yes, data does repeat in the SQL, which would be expected for the grouping. However, the data does not repeat in a group of the data returned by the SQL statement, so there is no reason for this data repetition.
It is not restricted to any one piece of data in the report. The line that repeats is the last line on a page. Clicking on the next page of the report shows the last line of the previous page is the first line of the new page. This is true whether the report is viewed or printed.
Does anybody have any suggestions?
Thank you.

I was able to resolve this. The detail section did not have the Keep Together checked. Once this was checked, the repeating line issue was resolved.

Continuation of line item data to next page in SmartForm

Hi,
Currently i had a requirement in SmartForm. Iam displaying the line items from bseg table in main window and totals of credit and debit in the total window which comes under the main window.
If the line items are more and it continues to next page i want to display the total window and created by window only after all the line items.
Please try to send ASAP.

You can print total by reading page numbers.
Ex: IF <current page> EQ < next page number>
Print total.
ENDIF
Regards,
Sairam

Clicking Export or Next Page button blanks out report

We are having an intermittent issue where a report loads fine with several pages or data but, when a user clicks the export or next page button, the report blanks out the data and shows the page count as 1/1 where it was 1/250 previously.
This does not occur every time, but seems to be happening to all users and some point and with multiple reports.
Has anyone else experienced this issue? We have tried restarting the page server and republishing the reports.

We are having an intermittent issue where a report loads fine with several pages or data but, when a user clicks the export or next page button, the report blanks out the data and shows the page count as 1/1 where it was 1/250 previously.
This does not occur every time, but seems to be happening to all users and some point and with multiple reports.
Has anyone else experienced this issue? We have tried restarting the page server and republishing the reports.

Continued On Next Page in XMLP Report

Similar Messages

Maybe you are looking for