Continuous Wi-Fi drop out on iPad2

My iPad 2 loses Wi-fi connection every few minutes when I'm using it upstairs. Proper driving me mad.
Have tried all the usual re-setting the router nonsence and it still does it. Using a BT Home Hub 3.
Anyone know a solution please?
I've seen this, but these setting are not on my Hub:
http://bt.custhelp.com/app/answers/detail/a_id/44504/c/346,1887,6461

that link is for hh4/5 and you have a hh3
you can try downloading inssider3 (istumbler if MAC) and then run it. This will show the broadcasting networks round about you and their channels including your own. If you then enter your router and change your wireless channel to a free or less congested channel.
inssider3.1.2.1
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

My wifi continually drops out - it is not a router problem as other laptops and smartphones in the house have no problem. How can i fix this???

Can anyone help with this....I purchased a macbook pro 13" in Sep 2011 and since purchase, have had continual problems with internet dropping out. I have other wireless products in the house eg laptops, smartphones, and ipods and these all operate without issue. Thw wifi on the macbook will work at start up for a few minutes then drop out, I then turn ot back on and after a few more minutes it will drop out again - hugely frustrating.

since purchase, have had continual problems
Why didn't you call Apple tech support? You are still under warranty.
Solution may be found if you search in the "More Like This" section over in the right column.

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

While downloading the free trial for Final Cut Pro X my internet has dropped out many times. It does however seem to continue ok each time it reconnects. Will this affect the software when it finishes? Is this a problem? Any advice please?

This has happened to me with a few downloads without any upsets.
You should be OK.
As I recall the download is around 1.2 gig so it takes a bit of time and effort to get it to your system.
Al

I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer. Pc now says waiting for mac to connect and has is stuck at transferring information. How do I get the process to continue?

I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer. I started up migration assistant on the Pc again and now says waiting for mac to connect! New MacBook Air is stuck at transferring information. How do I get the process to reconnect and continue?

Whew, good luck!
What version of OSX is on the older one?

ADSL continual drop outs

Hi there,
I have had nothing but continual drop outs on my line over the past few months. Sometimes I can get up to 24hrs on connectivity, sometimes it's only 5 minutes.
I have tried to call technical support multiple times, but it doesn't get my anywhere. I have a new modem (technicolor TG797 V3) which replaced a modem of the same type which was only 2 months old.
The issues all started when I upgraded from one plan to another and my service was cut and removed from the exchange (god knows why) and now I am faced with the daily task of disconnecting the phone line, plug it back in and hoping it will connect on a daily basis. This is getting old pretty quick.
Is there anything that can be done to solve this issue?
Cheers in advance
Lance.

Good afternoon, The first thing to do is an Isolation Test (see link below) to determine if the issue is from within your premises or outside your premises eg pit, exchange etc).https://crowdsupport.telstra.com.au/t5/General-Internet-KB/How-to-perform-an-Isolation-Test/ta-p/55014 Is your telephone crackly?Does it happen more in wet weather?Regardless, it could be a bad/corroded/wet/moist connection in the street pit, or the external connection outside your house where the line connects. If you are positive it is not within your home, you should get Telstra to come and check the external connections.Technical support (or you can do yourself, see link) is to go on to a stability ADSL profile, which will slightly slow you down.https://support.telstra.com.au/t5/Manage/ADSL-Line-Profiles/ta-p/undefined PS Please be aware that if Telstra find the problem is within your premises, they will/can charge for the call-out, so be very sure !!! Ledt us know how you goHope that helps.

Continued Drop-outs--time for re-install?

I previously posted about a problem with drop-outs while running 10 or so tracks of EXS24 instruments (it's a dual-core intel machine, 2 gigs ram running snow leopard)...I was advised to check out several links to articles on the apple website & the one thing that helped somewhat is removing Audio-Unit Plug-in components (located in /Library/Audio/Plug-Ins/Components)...
...things have improved, however, I'm still getting some dropouts...looking at the meters, it seems to me that some of the softsynths are overloading one of the cpu cores...I think something is funky with my EXS24's.
...the question now is: Is IT TIME FOR A RE-INSTALL of LOGIC?
Do I re-install all of Logic? Just the main program & soft-synths...what is the best way to do a re-install?

Brian Breen wrote:
I previously posted about a problem with drop-outs while running 10 or so tracks of EXS24 instruments (it's a dual-core intel machine, 2 gigs ram running snow leopard)...I was advised to check out several links to articles on the apple website & the one thing that helped somewhat is removing Audio-Unit Plug-in components (located in /Library/Audio/Plug-Ins/Components)...
...things have improved, however, I'm still getting some dropouts...looking at the meters, it seems to me that some of the softsynths are overloading one of the cpu cores...I think something is funky with my EXS24's.
What is your *I/O Buffer Size* setting in *Logic Pro>Preferences>Audio>Devices*
...the question now is: Is IT TIME FOR A RE-INSTALL of LOGIC?
Do I re-install all of Logic? Just the main program & soft-synths...what is the best way to do a re-install?
No ,re-installing Logic won't help ,your problem it's not application related...unless you deleted something from the applications directory...which is not what happens here
For some reason your system can't handle what you are trying to do...
maybe add more RAM if your MBP can take it and make sure that your HD is not full as Eriksimon suggested in your previous post.
A

Audio drop outs and continuing problems- Apple Support informed again.

Hi All,
Have had various audio problems with iMovie transfer to iDVD 6. iMovie had the problems initially but a weird trick seems to be helping me.
Copy a random new audio track into my film, paste it, then cut it out then empty trash..... all of a sudden my audio is clean again and perfectly in time with the video. I have informed the iMovies people in Ireland and they are at a loss to explain why this is now ok.
BACK to the plot and iDVD 6.
When I try to export this project from iMovie in iDVD 6 it either becomes an audio garbled nightmare or if I try and import into iDVD 6 I get audio that gradually becomes out of sync with the video visual. I know that this project was recorded in 16 bit audio so no joy there.
I've told Apple in Ireland that there are major audio issues with iDVD 6's audio set up + something they were apparently unaware of. I was assured that the tech dept's would investigate and solve. I am really surprised that they hadn't seen this problem in this forum!!
In the meantime any advice is very gratefully received. I'm on an Intel G5 Imac with 1.83ghz 1Gb sdram and 250 GB HD. So Software is currently limited!! I desperately need to get this project to DVD!!!!
Many thanks,
GUY

SAME EXACT THING HERE. This is what I posted in a diff thread:
2013 iMac 1TB Flash Drive
OS 10.8.5
Constant audio drop outs using Apogee Duet. I have to unplug and replug several times to get the system to recognize it. Sometimes when it is connected, Audio Prefs doesn't even recognize it and it shows up as "Unknown". When I click Audio Prefs before I get in, I get the spinning beachball and it takes a while for it to open. I have been in touch with Apogee but to no avail. It seems to work on my 2013 Macbook Pro, but I haven't tested extensively. It seems to get tripped up if I'm working in Ableton and get a Facetime call or if I try to use Youtube / Soundcloud. The system gets noticebly slower. When I switch back to Ableton, Duet is recognized (sometimes not recognized at all) but I cannot play anything inside the project window.
Not sure what to do at this point

Audio drops out while video continues to play just after making a cut!

I've been using Adobe Premiere Pro for a few months now and I use it to edit my YouTube gameplay videos. Here is everything I am doing in Adobe Pr:
1. Create new project
2. import my raw gameplay video (m2ts file)
3. import my wave sound file (my commentary)
4. Put them on the time line and play the video (it works then)
5. make a cut somewhere and the GAMEPLAY audio drops out not the video or my commentary.
The same thing happens in Adobe Premiere Elements as well. Should I convert my m2ts files to MP4 or AVI or something??? Please help

Last week, this song played fine on the burned copy.
Is this problem now showing up in the iDVD preview mode? Or is it with subsequent burned DVD's?
Go back to your project in iDVD. Go to File>Save as disk image. This will create a file that can be viewed on your computer's DVD player. The disk image will show you how your project will appear when played on a standard DVD player. See if this problem is repeated. If everything is fine, go ahead and burn the DVD using Disk Utility.
I hope this helps.

Is anyone got problems with iPad 2 and iOS 8 ? My service provider keeps dropping out. I have to restart it everytime any way I can fix this

Has anyone upgraded to iOS 8 and have found that the service provider keeps dropping out? I have to restart my iPad to get my service back. Only happened after upgrading! Would love A fix for this.

I'm not going to say that you won't find an easier solution than the one below, but I would recommend it as the "ultimate" solution.
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Apple TV and Drop Outs, Connection Issues

I use AppleTV to mirror my ipad 2. it's great. Love it Then I'll try it again and it may work but often the icon disappears. I then clear the password then re-enter it and that will bring it back or if that doesn't work I may have to shut down my ipad 2 at least once.
This happens almost every second or third time I try to use it.
I currently have an iphone 4s, ipad2, ipod touch and as someone has said before, this is the first time I've been deeply disappointed in an Apple product. I expect glitches every now and then but this continual drop out and connection issues I have is beyond the joke.
Does anyone have any solutions. Yes I have done all the updates, yes I am on the same network, yes airplay is turned on, yes home sharing is enabled.
As you can see I am peeved!

I too am having the same problem. I have a MB Pro running OS X 10.9.4 cannot see AirPlay option. Any solutions out there? Tried AirParrot but it is spotty at best.

Audio dropping out during playback in timeline

Hey everyone,
I've dug through these forums and unless I just completely overlooked it I have not found a solution to this issue. I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
Any ideas on what is happening would be greatly appreciated. This is incredibly frustrating have to export out a video just to be able to watch it through.

Having this annoying problem also. Using the Space Bar to play timeline it takes pressing and holding to a count of three or trying press play three time in a row using the space bar to get ungarbled audio, or any audio at all in a normal uncomplicated sequence on the timeline.
Really annoying. Audio used to be so simple and untaxing to a sequence.
Adobe Premiere Pro CC 2014.1 release
8.1.0(81) Build
OSX 10.8.4
40 GB RAM
G Raid G Speed Q w/ ESATA connection
1920x1080 29.97 Progressive Scan Sequence
48Khz
Apple PRoRes 422
12 channels of audio/ only 2 of 12 monitored.
1/2 resolution on Program monitor
ADOBE.....WISH THERE WAS A SOLUTION?

Airport Extreme dropping out and can't connect PC anymore

Hello
Suddenly, a couple of weeks ago, my internet connection dropped in the middle of surfing. I couldn't reconnect, Airport was only seeing the base station spasmodically and when I did try to connect I was being asked for a password which wasn't recognised. Hours later I called the support line and was advised to do a hard reset which I did, new name, same password. Now I'm reconnected most of the time, but it has dropped out a few times and the signal seems generally weaker. Something's not right.
I had not at that point done the July 1st update so it's not to do with that. I haven't a clue why it suddenly started playing up so strangely. (Though I have noticed a new unsecured wireless network in range and wondered if someone was 'hacking')
My main problem is that my business partner, who connects through a pc here (who remained connected incidentally when I first lost the connection) and continued to be able to connect until I did the hard reset. Now I can't connect that pc to the airport extreme. It sees it but gives an error message saying it's out of range and refresh the list when I try to connect. I fiddled about for hours. I've forgotten how the pc was set up in the first place and I'm going nuts. Can anyone help.
Thanks
Helen

Disappointed not to see any help on this one.
If it helps anyone out there to help me, I just uploaded the Airport Utility Software to the pc, typed in base station ID and password. Error message, check network connections. No help.
Try to connect the pc again the usual way from the list of available networks, it asks for password, I use it, then it says it needs to be 5 or 10 ASCII characters or 20 hexadecimal.
What I don't understand is that everything was working fine on both machines until two weeks ago when my base station went into spasm, dropped me but happy with pc, when I did the hard reset, keeps me, won't allow pc to connect.
I just don't know what to do now. Of course I suppose I could always make a call and pay £35 to have an apple technician tell me why their hardware suddenly screwed up for no apparent reason.
Seriously frustrated
Anyone?

Apple TV & Homehub 3 Home Sharing Drop Out

Good morning all and my apologies for posting this in the BT Vision section but I didn't know where else to go.
I've had BT Infinity for a few months now and been generally happy with the service. I'm a Mac user and at the weekend I decided to purchase an Apple TV 3. One of the main things I wanted to do with the ATV3 was to be able to use Home Sharing from my iTunes on my Mac. I set everything up and it was all looking good, within minutes I was happily streaming video to my Apple TV. 5 minutes into playback however it dropped out. It said on the Apple TV that Home Sharing needed to be enabled, I went back to the Mac, Home Sharing was enabled but I reconnected it again and it started working again. 5 minutes later again it disconnected.
I'm no network/router expert but even then I knew something was wrong. I started to trawl the Apple forums looking for people with similar issues and found a LOT! Problem is that everyone has different routers, issues, fixes and none of the solutions I tried seem to work for me, such as changing the channel on the router, reboots etc.
Basically I'm just really stuck now. I'm not the most technical of people (but I do know some stuff) but I'd love some advice if anyone can help. At the moment the Apple TV is practically unusable for me and I really would love to be able to have this working as when it does work for those brief few minutes it works really well and does exactly what I want it to.
Many thanks in advance.
Solved!
Go to Solution.

I should add I found the following on the Apple forums although this seemed to be quite an old post (2 or 3 years) and was for an older Home Hub as when I checked I couldn't seem to add the Port Maps in the same way as this post and got confused
Solution:
1. Update the software on Apple TV (Settings | General | Update software)
2. Perform windows update (Start | All programs | Windows update)
3. Obtain the latest release of iTunes software. Run iTunes. From the iTunes menu select About | Check for updates. I am running version 9.1.1.12.
4. Check that you can view movie trailers from Apple TV. If you can't then you the apple TV has not connected to the BT home hub wireless network. You need to enter the BT home hub wireless key (which is found on the back of the bt home hub) as you password when you connect your apple TV to the wireless network. Check again that you can view Movie trailers. Don't proceed until you can.
5. Enter the BT home hub manager (Start | All Programs | BT Home Hub | Hub manager). Select Advanced. Enter admin as the username and your password to your hub. This is either a password you entered when you first set up the hub or the S/N number printed on the back of the BT Home Hub. Click continue to advanced. Select Application sharing. Select Create a new game or application.
Enter MyAppleTV against Name. Select Manual Entry of Port Maps.
Enter this Information one line at a time:
Protocol | Port range | Translate To ... | Trigger Protocol | Trigger Port
TCP | 123 | TCP | TCP | 1
TCP | 3689 | TCP | TCP | 1
UDP | 5353 | UDP | UDP | 1
TCP | 80 | TCP | TCP | 1
TCP | 443 | TCP | TCP | 1
TCP | 53 | TCP | TCP | 1
6. In BT home hub manager navigate to the devices menu, just above application sharing. And select MyAppleTV from the drop down menu and assign it.
7. Turn the power off on the Apple TV, BT home hub, and PC. You must turn the BT home hub off.
8. Turn on Home hub, PC. Wait for your network to return. When it has turn on apple TV.
9. Open up iTunes. In the menu select Edit | Preferences | Apple TV. Check that Check for Apple TVs is selected.
10. In iTunes under Library and Store, Devices should appear and within Devices Apple TV should appear.
11. If this does not work then phone Apple support and do not let them fob you off by offering you a replacement Apple TV.

3G connection keeps dropping out after 4.2.1 update

Hi, I'm wondering if anyone could help me.
I have the iPhone 4, and it was working perfectly... until I upgraded to iOS 4.2.1.
Ever since then, my 3G connection keeps dropping out, and I'm just left with vodafone UK (with usually 3-4 bar signal) but no 'o', 'E' or '3G' symbol.
After about 20 minutes of no cellular data, I'd get the 'o' symbol, then 10 seconds later it would change to '3G'. But then after 5 seconds it would lose it. The cycle would continue in this way.
Strangely, when at home, the 3G would stay connected. But when I go anywhere, I lose 3G.
When I turn 3G off, I get constant 'o' connection where ever I go. It doesn't drop out.
I've tried resetting the phone, and resetting network settings.
Does anyone have any ideas?
Thanks.

I'm having a similar issue with my new iPhone 4 (w/ 4.2.1)... It continually cycles through the following sequence:
AT&T / 3G
AT&T / No Data
Searching…
Searching… 3G
AT&T / 3G
(loops…)
Here is a video of the cycling. Note the iPhone 4 is just sitting on a coffee table in my house.
http://dl.dropbox.com/u/7186070/ip4fw421searching.mov
Also worth noting, I just got the iPhone 4 and I updated it to 4.2.1 right away. Previously, I had a 3GS which did not exhibit any of this behavior in the same location in my house. Also, my girlfriend still has a 3GS and has FW 4.2.1 without these issues. I have a video of her phone in the exact same location taken just after the clip above and her phone maintains 3-bars / AT&T / 3G the entire time.
I picked up the iPhone 4 while out of state over the holiday weekend and did not observe any of these connectivity issues, in fact the 3G throughput of the iPhone 4 was significantly better (consistently got >4 Mbps down / >800 Kbps up) than what my family members were seeing with their 3GS models.
I believe it is a baseband issue introduced with the 4.2.1 update for iPhone 4, but I also strongly believe there is some tower component to this problem (ie, software revision at the tower or configuration).
Like others here, I also performed a restore to 4.2.1 through iTunes and setup my phone as "New" and I continue to see the behavior. The phone is unusable in my house unless I manually disable 3G. As a final data point, when I'm able to maintain a 3G connection long enough in my house I get the following throughput from Speedtest.net: 1863 Kbps down / 543 Kbps up.

Midi / USB drop out since Lion upgrade!

Hi all, i have had great responses and success in the past with this forum, i really really hope this will continue.
I have been gigging using mainstage 2 and a M-Audio Oxygen midi keyboard controller for a few years now and until lately it's been fantastic. I will never go back to a stand alone manufactured synth. I am using a macbook pro, 2.93ghz with 8 gb ram. I initially upgraded from snow leopard to lion when it was launched but had to go back as Creative hadn't any lion drivers for use with my emu 0202 audio interface. Last month i found that they had done them and i re-upgraded to Lion. Since the upgrade i am experiencing Midi drop outs. This is to say that whilst performing i get an error message saying something like midi input device no longer available. This has happened a few times now but last night (new years eve!!), not only did i get this message which i sorted with a reboot but a few minutes later i had a midi note hang and i noticed that there was no longer any usb supplied power to my keyboard. The answer again at this stage was a reboot.
I would ideally not like to reinstall snow leopard as there are quite a few great things in lion which i would miss, but obviously if i can't resolve these issues i don't see that i have any other choice.
Any possible suggestions as to what may be causing these problems will be very much appreciated.
Thanking you in advance
Mark
PS Happy New Year

My experience with Lion was great for a while, it was effortless, everything I had attached still worked with no problems aside from needing occasional drivers. Once Lion 10.7.2 was released, I updated my system and again, no problems. If I recall correctly, 10.7.2 was released in October. Suddenly in December, I began having random software and midi issues all around my system. I do not use Mainstage but I have noticed others have had similar problems with various software and USB midi controllers, and have not seen a fix.
I regularly use Pro Tools 8, Ableton Live 8 and occasionally Reason 5. I also have an M-Audio Axiom 61 and Korg padKontrol attached via USB. After about 2 months of trouble-free operation, Live and Reason would not open and the accompanying software for my padKontrol no longer would either. These apps would just "hang" and I would eventually have to force quit them. In addition, Audio Midi Setup would also hang when attempting to switch to the midi preferences page. Pro Tools still worked, but I could no longer receive midi signals. I also use a wireless USB stick to connect to my home wifi signal and that no longer worked and neither did the accompanying software.
It's possible that there are deeper issues in your system as well as mine and the others having similar problems.
At times, I wonder if there is some kernel errors embedded in my computer. I got my MacPro when Snow Leopard was fairly new and had numerous kernel errors resulting in many applications not functioning. I eventually sorted them out but ran into similar USB related issues with the Snow Leopard 10.6.8 update, so I remained on 10.6.7 until Lion was released.
The only successful fix I've had is switching from Lion back to Snow Leopard 10.6.7 after erasing my entire hard drive. I've tried reinstalling Lion through both upgrading from Snow Leopard and a clean install of 10.7.2 after erasing my hard drive again.
I believe my USB and midi problems stem from kernel errors somewhere but cannot find them (I have used Disk Utility many times). I really liked using Lion but I lose so much functionality and my internet connection so I have determined that I will not be using it. I may try Lion again when 10.7.3 is released but am wary. If anyone has ideas on how to fix these issues, I would love to hear them.

Continuous Wi-Fi drop out on iPad2

Similar Messages

Maybe you are looking for