Contract renewal lead time in standard sap?

Hi,
I need a report which can tell me per material (contract based), what is the lead time to renew the contract? Average consumption in production taken into account!! Case:
contract quantity 1000 PC
average consumption in factory over the past 4 months : 50 PC.
contracl renewal lead time 4 months.
Actual stock level is 400.
I assume a lot of purchasing people like to have such a report, but does it exists in SAP or does any body have a clue where to look?
Does anybody have the same experience, that this report is missing in SAP? Or do I really need (as proposed solution) work with queries?
Best Regards,
Eric.

Dera Eric,
It seems like you combine between Purchasing data and inventory data, so you need to custom a report that meet your detail requirement for 1 preview.Or you can run several SAp standard report and combine it in excell or you can use SQVI.

Similar Messages

Slow running time of Standard SAP Reports

Hi Experts,
Standard PS reports (such as the one with the transaction code s_alr_87013558) are taking quite a lot of time to fetch the desired results. After further analysis we have found that the time in retrieving the data from certain standard tables is the root cause behind this issue.
Is there a way in which we can speed up the processing time for fetching the results?
Regards
Varun

Hi Varun,
Other than increasing the physical memory all other are standard SAP practices to increases the performance of the reports..
The standard reports will definitely fetch the data from COEP, COSP or RPSCO tables, and these are very heavy tables.
if you are taking help from ABAPer, he should be able to do some primary indexing on these tables to see the querying is faster..
On a lighter note.. wait for HANA upgrade..
Regards
Sammar

MULTIPLE LEAD TIME FUNCTIONALITY

Hi Guys,
can anyone explain about "Multiple lead time functionality in SAP".
whether its related to any particular modules.pls provide any inputs or send some link were i can get this requirements,

hi
please refer to this document
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0901cba-f49e-2910-748c-d7ce4c0c4c1c
you may find it helpful
regards
Aakash Banga

Positive lead time

Hello,
in PP customizing, Shop floor control - operations - scheduling - define scheduling parameters for production order:
In adjust dates, i have: do not adjust basic dates, dep.reqmts to order start.
I need a positive lead time too. SAP don't permit it. WHYYY???
In our plant we need to increase several days the requirements date of material to receive the material several days after the beginning of the operation.
How could i make this????
THANK YOU ALL.

Hi,
Generally the reqmts dates of the components is initially set to the order start date of the planned order to which the components are assigned.
--- if a component is reqd earlier or later we can shift the reqmts date using the lead time off set / operation related lead time off set in the Bom Item detail screen.
Lead time off set:
if we make an entry in this field the reqmts date which is initially set order start date is moved.
Only -ve values are allowed.
ie components must be available before the scheduled start date.
Lead time offset for an Operation:
if we make an entry in this field the reqmts date which is initially set to order start date of the operation to which the components are assigned is moved.
+ve value -
components can be available after the start date of the operation.
-ve value -
components must be available before the start date of the operation.
You need to maintain these fields in BOM Item details screen Basic data.
Regards,
nandha

PO Lead Time Standard report

Hi Experts,
Do we have Standard report to monitor PO Lead time. (Time taken by Vendor to fulfill the Order)
Regards,
Jackie

Hi,
You can use the report MC$K to check the delivery date vairance for the vendor with respect to material delivery.
The delivery date variance is calculated with respect to PO Delivery Date and GR Posting Date.
To execute the report, the delivery date variance needs to be defined in transaction code MCFC at Purchasing Org. level.
Regards,
Bijoy Kumar

Same standard SAP prog is taking longer time in new version than older ver?

Hello
The below scenario is as batch job.
IDOC processing standard SAP FM (which is designed and working on the Parallel processing technique) is taking 45 min, in release 3.1 SAP system and if we run the same variant (same amount of input data and rest of the stuff also same) in ECC6.0 verson, its taking 5 hours!
Actually, i do not have log on ID for 3.1 release, hence i can not debug it. Pls. let me know What is the good and best approach to analyse this bad perdformence? is it ST05? or i should debug the prog and watching EACH STEP by using F5/Single step debugging?
Thank you

Hello,
please refer to the blog of Hermann Gahm about ST12 transaction and use it to trace and analyze the results.
Here is the article how to trace a running batch job: /people/hermann.gahm/blog/2009/09/22/st12--the-workprocess-trace
But in order to really optimize something you'll need expert knowledge.
Kind regards,
Yuri

User exit or Badi for changing the lead time in ATP check in VA01/VA02

Hi All,
Currently, SAP standard functionality takes up the lead times maintained in material master to create the schedule lines in the sales order in VA01. I am looking for some user exiit/Badi/Enhancement point where I can change the lead time. This is somewhat urgent so any help in this regard is appreciated.
Regards,
Sandeep
Edited by: Sandeep Gaitonde on Sep 1, 2011 9:16 PM

Hi Sandeep,
These are the user exits will trigger in va01 .
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Please check this and post .
Regards,
Madhu.

Standard SAP Reports

Hi MM friends
Could any suggest report for the below (is it possible or not)
The required reports & data from SAP :
u2022Vendor assessment
1.Creating Inspection inventory to receive all goods inside & deduct the rejected quantity (Quality: # of items rejected / # of items delivered) & creating report clarifying the rejection percentage for each supplier.
2.Creating report On- time Deliveries: Difference between the delivery date and the promise date
3.Price: Fluctuation of prices over the period of the contract
4.First Time Fill Rate: # of deliveries for every purchase order.
u2022 Other reports & information needed to be done through SAP
1.Consumption report /item / flexi period (From u2013to) allowing the buyers to sign a long term agreement with the suppliers.
2.Reorder point (safety stock) per item- the purchasing department must create the reorder point /each item according to u2013 consumption rate/item- storage area & the dimension of the item u2013 The expiration date /each item.
3.Reorder policy/each item. The purchasing department must create reorder policy /each item to maximize the efficiency.
The reorder policies as follows:
-(Lot for lot- minimum quantity- fixed quantity u2013 minimum lot size- maximum quantity )& all policies must be created according to the item nature & the supplieru2019s conditions and available discounts.
Regard
Senthil

go to SAP1 and SAP2 tcodes for standard reports
check the required standard reports

Replenishment lead time & Scheduling Agreements - Please help

Hi,
I have a few questions & issues in regards to Replenishment lead time & Scheduling Agreements.
1.     Where are stock requirements & Replenishment lead times configured?
2.     What is a stock/requirements list?
3.     What is Replenishment lead time in MD02/MD04?
4.     Why do negative supply values appear under replenishment lead time in MD02/MD04?
5.     What are the differences between MD02 & MD04?
6.     How do you get to the following screen, since I canu2019t get here from MD02 or MD04 (missing buttons and Replenishment lead time information):
http://i34.tinypic.com/9hl9hz.jpg
Please help. This is very important.
Thanks,
Laura

Hi Laura,
The RLT can be set in the Masters Materials.MMR and Also in the Documnet Type Configuration.
But as per SAP standard Procedure the Prority will be the document type.
That means the RLT given in the Order document will overseed the RLT given in the MMR.
Go to material master and select MRP3 view. There see what is maintained for "Strategy group". Now go to OVZG, select this Requirement Class and tick the field "Rq" against this.
Now go to OVZH, select your Requirement Type and ensure that the above Requirement Class is assigned to your Requirement Type.
Now create a sale order and check in MD04.
Hope ethis helps u..
Cheerzz..
subbzz..

Lead time reffering to open SO- - -***** URGENT ***

Hello
When we create a brand new PO, the materials due date should be automatically
calculated using the materials standard Lead Time. For example, if we are to create a PO on 10/1/07 for a part that has standard Lead Time 65 days, the materials due date shouldbe automatically calculated as 10/1/07 + 65 days = 12/5/07 and the PO shouldshow that the part's statistical due date and delivery date is 12/5/07.However, recently SAP has been checking a pending sales order's furthest duedate and stretch the PO's due date to match the sales order's due date. Forexample, in the previous example the PO's due date should be 12/5/07 but if there is a sales order that is not due till 3/7/08, SAP calculates that the part
on this PO is not due till 3/6/08. This new function is affecting our PO
creation and its due date. Could you advice so that POs automatically use a
part's standard LT to calculate the part's due date instead of using SO's due
date?
I checked planned delivery time in MMR ,INFO RECS,VENDOR Checked the availability check and checking rules what could be the reason...?????
Will AWARD FULL POINTS URGENT

If you used a remove personal settings option from Windows or Firefox,you may well have permanently lost those bookmarks.
* Undelete<br>If you did that then timely use of a file undelete utility and a good helping of luck are likely to be required to attempt recovery (probably best to stop using
the computer entirely, until you have such utility).
*Your Own Backups<br>You could have a backup system in place that backs up such files or the firefox profile, and you may be able to use that.
* Synced to another machine<br> you may have the bookmarks synced on another machine, or even on an external server
**see [[what is firefox sync?]]
See also [[lost bookmarks]] but I am not sure any of that applies in this case, it is worth reading it though
Normally

Bapi for Mass change of Purchasing Lead Time

Hi All,
Could you please suggest whether is there any BAPI to perform mass change of
purchasing Lead Time within the material master.
The field is Planned delivery time(marc-plifz) in MRP2. The changed value should reflect to all the Material numbers in the selection screen.
Thanks & Regards,
Rayudu.

Hi Lakshmi,
From ECC 6.0, SAP has got the functionality of Mass cahnge of contract,
using the tcode MEMASSCONTRACT. from which u can maintain it.
Hope it wud have answered ur question
Reward if useful
Aasif

Lead Time - Customizatiou0131n steps: Shipping point, route, and loading group

It says about delivery scheduling that "The lead time considers the shipping point, route, and loading group". Can anybody explain me briefly the customization menu steps about this sentence?
Thanks in advance.

Please go through this document it will help you
1) Maintain transportation planning point through Menu as follows:
IMG Maintain Logistic Execution  Definition Enterprise Structure  transportation planning point.
Create your own like BP01 enter the general data¡¯s required
2) Defining modes of transport:
IMG RoutesBasic Transportation Functions  Transportation Logistic Execution Define modes of transportDefine routes
Use the standard like:
Shipping type: 01
Description: Road
3) Define shipping types :
Basic Transportation Transportation Logistic ExecutionIMG Define shipping types Route Functions
Or through T-code: SM30
PT: 01
Description: Truck
Mdtr: 01
STPG: 0001
4) Define transportation connecting point :
LogisticIMG DefineRoutes  Basic Transportation Functions  Transportation Execution Define transportation connection pointsroutes
Copy the std point and make it FB01 as departure zone and FB02 as destination zone
5) Define routes and stages.
 Logistic Execution IMG Define Define routes Routes  Basic Transportation Functions Transportation routes and stages
Use the standard route and copy it as FB0001 and enter the departure zone and destination as what we created.
6) Defining Transportation Zone:
Basic Transportation Logistic Execution IMG Define transportation Router determination  Route Transportation Functions zones
Use the standard transportation zone depending on the route so as for the example use 0000000003 - Southern Region
7) Maintain country or transportation zone for shipping points
 Logistic Execution IMG  Route determination  Route  Basic Transportation Functions Transportation Maintain country and transportation zone for shipping point
Shipping point be ASH1 and route as 0000000003 which is assigned to country India
8) Maintain route determination:
Logistic ExecutionIMG Route determination Route  Basic Transportation Functions  Transportation  Maintain route determination
Country of departure: India
Departure Zone: 0000000003
Country of destination: India
Destination Zone: 0000000003
And enter the datas needed like shipping condition 01, etc.
Maintain Transportation relevance for shipping point, sales document type and delivery types.
9) Now create shipping types
IMG Define shipment Shipments  Transportation Logistic Execution types
Copy the standard 0001 and make it to AFIL
10) Define and assign traffic zones through T-Code: T_76 (or) thru menu as follows
IMG Define Basic functions  Shipments cost  Transportation Logistic Execution and assign tariff zones
Copy the standard and make it to FABTARIFF and assign our transportation planning point as ATP1, ATP2 assign tariff zone to every particular transportation planning point
11) Define and assign pricing procedures
Shipments Transportation  Logistic Execution IMG define and assign pricing Price control  Pricing cost procedures
Copy the standard shipping cost pricing procedure SDFC00 to FBSC01
12) Assign purchasing data:
 Logistic Execution IMG Assign purchasing data Settlement  Shipments cost Transportation
13) Assign transportation planning point to shipping condition, purchase organization, purchasing group and to plants.
14) Define Automatic G/L account determination:
 Transportation  Logistics Execution IMG Automatic G/L Account Determination Settlement Shipment Costs
Or through T-code: OMWB
Use G/L account 614000 as used in standard
15) Automatic determination of CO assignments:
IMG Automatic Settlement  Shipment Costs  Transportation Logistics Execution Determination of CO Assignments
Or T-code: OKB9
16) Maintain shipping point address.
 Logistics Execution  Definition Enterprise Structure Define, copy, delete, check shipping point
17) Creating G/L account centrally.
Financial AccountingAccounting  Master Records  General Ledger 
Individual Processing Centrally
Or through T-Code: FS00
18) Enter the G/L account 614000 to the company code AFIL
19) Create transportation condition records:
 Shipment cost  Transportation  Master data Logistic Execution createPrices
Or thru T-code: TK11
Enter condition type FB00 that is freight condition type, which is used as standard in the shipping cost pricing procedure.
Enter the price and save it
Process:
1. The system determines the pricing procedure for the shipment cost item-using transportation planning point, service agent and shipment cost item category
2. Calculation Basis
3. Condition Record
4. Access sequence.
For the sales order, create a delivery using VL01N and pick the goods. Now create a shipment using VT01N and assign the delivery to the shipment document. Make sure to enter the carrier and other details before performing the transportation planning and execution. Save the shipment document and PGI for the delivery would be done automatically.
A shipment represents a physical goods movement between two or more locations.
For the system to create a shipment, shipping-relevant deliveries must exist.
You use Transportation Planning to group pending deliveries into shipments and then to perform the shipments.
The outbound delivery documents contain routes that the system calculates in route determination, and a transportation planning date for the delivery.
Dynamic transportation planning is responsible for grouping together outbound deliveries into shipments that have at least the same route, visit plan type and the same transportation planning date.
The following restrictions can be taken into account for a shipment in Dynamic Transportation Planning:
Weight
Volume
Variable capacity
Number of stops
Maximum duration
Loading units
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Transportation Create Single document Logistics Logistic Execution  TransportationPlanning
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
 Transportation Planning  Create Single document Logistics Logistic Execution Transportation
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Single document Logistics Logistic Execution  Transportation Shipment cost Create
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select the line item and double click it.
Go as main menu: Item --> Acc. assignment, you enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Generally process is-
1) VL01N
2) VT01
3) VL02N - PGI
4) VI01
5) ML81N Service Entry Sheet
6) MIRO Invoice Verification
Shipping docs (VT01) are created before PGI...
You cannot carry out transportation planning or creation of shipment after the goods issue has been executed. Once goods issue is done it means that the material has left your premises so there is no need for a transportation planning after it.
In case you need carry out the shipment documents at the end of the day you could just create the delivery documents during the day and at end of the day create the shipment documents and the goods issue
This link is also usseful:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LETRA/SDTRA.pdf
Hope this helps you.
Regards
nitin

Need Automatic Lead-time scheduling in Planned Order using MD11

All,
Our users have a requirement that when they create a planned order using MD11, they would like system to do automatic lead-time scheduling based on the "basic finish date" entered by the user. Currently the system is taking 3 days from the in-house time maintained in material master to calculate the basic start date. But users want to use the 100 days that have been maintained in the routing.
Currently users have to click on "manual scheduling" on the planned order for system to pick up 100 days from routing which is an additional step for the users. Hence users want an automatic way in which system would do lead-time schedule when they enter the basic finish date.
Thanks,
Swapnil

Dear Swapnil,
In my understanding it is the standard SAP behaviour even if you have made the necessary settings in OPU5 for the planned
order type.
If my understanding is correct, then as per this setting the MRP behaves for the particular plant and order type combination.
Whenever you create a planned order manually you have to do a detailed scheduling and then you get the production dates
for the planned order.(This might be because generally when a planned order is converted into production order the system
carries out a lead time scheduling.- Check the same and correct me if I'm wrong)
Even if you update the material master through CA97,you will not get the detailed scheduling done along with the production
dates.So you have to perform this manual activity during MD11.
What is the reason of setting the in-house production time as 3 days,if the exact production time is going to be more?
Check and revert
Regards
S Mangalraj

Total Relenishment Lead Time vs. Routings Lead Time ( very urgent)

Hello PP Champs
Need urgent help
I am facing a scenario in current project -
My Customer service quotes for delivery to an customer with in 3 days for a stock item by seeing the availability check with Total Replenishment Lead time in MAterial Master , but when production order is created SAP schedules the same on routing Lead time basis with a date after 7 days. this seems technically correct as per Std.SAP settings
1=but How to avoid this business conflict in SAP PP module?
2=another thing we are nt using the capacity planning with this client ,but incase we get 2-3 orders with same start date and same requirement date for a single work center " how to priortise the selection of production orders" w/o capacity planning
pl consider first query as most urgent and help me
Could somebody put a thought on this and help me out.. I'll reward full points any helping hand for the same
Thx in advance
BR
Sumit

Hi,
you can define via define the checking scope opjj whether to include the RLT
in availability check or not.
Note:
Items for which the delivery date falls within the replenishment lead time, but for which there is no inventory, are confirmed for delivery after the replenishment lead time. In the case of items for which the delivery date falls after the end of the replenishment lead time, the system assumes that everything can be confirmed.
In the standard version, leave this field blank if you want the system to check the replenishment lead time.
Dependencies
If you want the system to check the replenishment lead time, you should make sure that you have entered a value in at least one of the following three fields in the material master:
GR (goods receipt) processing time (Purchasing view)
Planned delivery time (MRP I view)
GR processing time (MRP II view)
Otherwise, the system confirms every requirement
Regards,
nandha

Intercompany STO lead time

Hi Guys,
We have an issue - i.e. when we create STO manually in ECC 6.0 it always add extra one day to the good issue lead time. I have checked and we have no plan delivery date on the material master, 'pick & load' at the shipping point is standard 1 hr, no lead time on the route. Also as this is intercompany STO so we do not use PIR.
Any ideas where can this one day extra lead time comes from?
Thank you.

Thanks girang. I have checked the Shipping point configuration and it is standard 1 hr for 'pick & load'. The funny thing was we tried creating STO from the same supplying plant to existing plants in SAP and they worked fine; but this problem occured when we created STO to the newly added plants into SAP. Can't figure out what is the problem...

Contract renewal lead time in standard sap?

Similar Messages

Maybe you are looking for