Control ALV: Problem with Fieldcat buffer
I have developed an ALV report using grid controls.
However when i change the fieldcatalog(moving coloumns order and so....) and run again i dont see the effect on the list. I tried logging off and in but still same problem. Also is passed below buffer parameters also.
What could be the issue with controls?
Any hint/ideas greatly appreciated.
Thanks.
CALL METHOD GRID_100->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BYPASSING_BUFFER = 'X'
I_BUFFER_ACTIVE = ' '
IS_VARIANT = gv_variant
I_SAVE = gv_save
IS_LAYOUT = x_layout
CHANGING
IT_OUTTAB = <gt_table>
IT_FIELDCATALOG = it_fieldcat[]
IT_SORT = it_sortcat[]
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
I just wanna let everyone know that <b>today</b> i suffered the same and exactly issue like in this entry. It was really causing me to bang my head -> wall like Rich....
I couldn't see my result after i insert a new column and move a column...
yeah, guys out there, when you move your ALV fieldcat... make sure you check your layout management tooo...
otherwise you go around the world to look what's going on!....
phew... thanks to this post... oh god!
william wilstroth
Similar Messages
-
ALV: Problem with toolbar event
Hi ALV-experts,
I have a dynpro with a header area where I display an ALV table. Below this I have a subscreen with a tabstrip control and two tabs.
In the ALV toolbar I defined an own button. This button gets deactivated after pressing this button. I achieved this by the option "disabled" in the structure stb_button within the event handler for the toolbar event.
This works all fine so far. If I start the dynpro and click on the button in the ALV-toolbar the buttons gets deactivated afterwards. But I have I jump between the tabs before I press the ALV-toolbar button, the button does not get deactivated.
The debugger does not go into the event handler of the toolbar event. I also did system debugging of the method SET_TOOLBAR of the CL_GUI_ALV_GRID-class. Here I pass in both cases the command
raise event toolbar e_object = m_cl_toolbar e_interactive = i_interactive.
but in the second case (when I change the tabs before I press the button) the event handler is not executed and I don't know why. I also tried to register the event handler for all instances of the ALV still with the same result.
The ALV method set_toolbar_interactive( ) did also not solve the problem.
I couldn't find any SAP note about an issue for this event.
Does anybody have an idea or a solution for this problem?
EDIT:
Problem solved, it was typo!
Thanks in advance and regards,
Martin
Edited by: Martin Fischer on Jul 7, 2010 4:53 PMThe problem was a typo!
-
SAP Gui 7.20 PLevel 3, ALV Problems with German Umlauts u00FCu00F6u00E4...
Hi,
we have updated our SAP Gui to version 7.20 lately and have some serious problems now with entering German Umlauts 'üöäÜÖÄß' into any editable ALV grid.
This means when typing in e.g. 'ü', the grid immediately removes this character and replaces it by, well, by nothing. It just ignores this character at all.
SAP Gui is currently at patch level 3 . The correct version is 7200.1.3.3190, build 1196830. Running German Windows XP clients with service pack 3. ERP is running SAP ECC 6.0.
Is this a known problem? Has sbdy. a workaround this?
Edit: Just found the release notes for SAP Gui 7.20 Lvl 3:
2010/09/02 Texts get garbled while typing umlaut character in ALVGrid, Note 1503081
This note, however, is not open for public view. OTH this means SAP was aware of this problem and tried to correct it to no avail so far.
Thanks,
Michael
Edited by: Michael Fritz on Nov 19, 2010 11:19 AMHi Martin,
where did you get this info? Any official SAP note available? Do you encounter similar problems?
We, too, noticed that uploading and downloading files from directories with German Umlauts, this fails now,too. There may be problems with files, too, however, we did not check this so far. The previous SAP Gui, I guess it was 7.10, didn't have any problems with this.
I start wondering if SAP Germany have ever tested this? Or do they not use Umlauts anyway -
Hi,
I have 2 applications that are connected to Tuxedo.
The first have a VB client and the second a java client (with WebLogic and jolt).
The first don't have any problems.
With the second, when I call a Tuxedo service that return a lot
of data, I have an error when the service fill the Tuxedo buffer.
I don't know exactly what is the problem.
What do you think of it ?David,
Where is the error reported (in the java client, in the JSH, in the server process?)
What is the error?
Is there anything in any of your ULOG files?
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
David Walczynski wrote:
Hi,
I have 2 applications that are connected to Tuxedo.
The first have a VB client and the second a java client (with WebLogic and jolt).
The first don't have any problems.
With the second, when I call a Tuxedo service that return a lot
of data, I have an error when the service fill the Tuxedo buffer.
I don't know exactly what is the problem.
What do you think of it ? -
Control surface problem with tracks assigned to Rewire channels
I'm using Logic 9 and Reason 4. My control surface is an M-Audio ProjectMix using Mackie emulation.
I have a simple project in Reason with 2 instruments, and a created a simple Logic project. I then created 2 external midi tracks, and then used the library tab to assign them to the Reason devices.
My problem is that, unless I set the control surface to Track, it always shows the rewire objects (and they don't have any controllable properties). This is annoying as they are taking up space on the control surface, and since they are not visible in the mixer in Arrage mode (unless I go to View>Show Other Tracks) I would not expect them to be visible on the control surface. And most annoyingly, whichever rewire object in the mixer is selected, all the rewire channels on the control surface will display that object's name (surely that's not supposed to happen).
Interestingly, if I create either 2 instruments or a multi in the environment, and wire them into the Rewire objects, then set the tracks to point to the instruments, the problem disappears.
This does not sound like correct behaviour to me; can anybody confirm that this is what you would expect?
Thanks,
Adam.
PS. I would guess that it's because Logic treats them, internally, as having the same channel, which is why they can't be individually controlled.Let's try "disable handshake" in the nucleus remote. You have to restart the nucleus for the change to take effect.
It worked for me!
Regards -
Dear All,
I have created an ALV Grid Control and have one column as a check box.
when i tick one checkbox in a line item i pop up a message saying "Do you wish to continue".
If the user selects NO then i automatically want to deselect the checkbox.
I tried clearing the work area of the internal table in the data change event.
But when the alv is refreshed the checkbox is still ticked.What should be done to avoid this.
Is freeing the custom container and creating it again everytime the user selects NO a good option?
Kindly suggest.
Regards,
VarunIn ALV you put check box like
X_FIELDCAT-FIELDNAME = 'CHK'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
X_FIELDCAT-INPUT = 'X'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-CHECKBOX = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
in between you put logic
IF CHK = 'X'
*---popup_to_continue_yes_no
PERFORM POPUP_TO_CONT_YES_NO.
endif.
FORM POPUP_TO_CONT_YES_NO .
CALL FUNCTION 'POPUP_CONTINUE_YES_NO'
EXPORTING
TEXTLINE1 = 'Click OK to leave program'
TITEL = 'POPUP_CONTINUE_YES_NO'
IMPORTING
ANSWER = ANS.
IF ANS = 'J'.
LEAVE PROGRAM.
ENDIF.
ENDFORM. " POPUP_TO_CONT_YES_NO -
The problem with the buffer in the Creative zen vison: M. gives problems to that at playing vid
I had a question concerning buffer of the CZV: M. I hear that there are problems after 0 a 5 minutes that he starts he slowly at reageren.is this really or I has found oneself understood?
to greet - Glenn-VUI had the exact same thing happen. I turned my player on one day not having dropped it and the screen is all distorted so to speak. In addition, now when i turn it on its not recognized by the creative media player.
-
Front end printing with control technology problem with Mac platforms
Hello,
We are looking into replacing Host Spool Access method "F: Printing on front end computer" with the newer "front end printing with control technology" but are running into an issue. Our Mac platforms cannot print duplex nor print multiple pages per side using the new technology. We have followed SAP's recommendation to use the POST2 device type but it still won't allow full printing functionality. Has anyone run into this and if so how did you overcome it?
Thanks and Regards,
RichHi Rich,
I've had success getting duplex printing through "front end printing with control technology" with the Mac SAPgui as follows:
In the Mac SAPgui, go to the Preferences window and select Printing (i.e. Preferences -> Desktop -> Printing).
In the "Media sides" pull-down menu, select one of the "two-sided" choices (such as "two-sided-long-edge").
Click the "Save" button at the bottom of the window (near the right hand side.
Print to a Front end printer.
I haven't figured out how to get n-up printing.
/David Rosenberg -
Hi all !!
When setting a filter on ALV grid (called with fm 'Reuse_alv_grid_display') after enter, the selection field are truncated at 10 bytes, also using a match code .
the result of the list is consequently mistaken.
Somebody know how to fix that ??
Regards , AndreaHi,
Can you explain a little more? How are you setting the filter, and F4 at what place, is this a editable field which is having this issue?
Regards,
Ravi -
Hi guys,
I have a problem in ALV. There is character field which is company code , whenever the value is '000'or 010' it is displaying as '0' or '10'. can you please help me on this. here is the field catelog for this... it is really urgent.
CLEAR e_fieldcat.
ADD 1 TO w_col_pos.
e_fieldcat-fieldname = 'AUFNR'.
e_fieldcat-seltext_m = 'Company Code'.
e_fieldcat-col_pos = w_col_pos.
e_fieldcat-no_zero = space.
e_fieldcat-lzero = 'X'.
e_fieldcat-edit_mask = '==ALPHA'.
APPEND e_fieldcat TO t_fieldcat.
thanks.Hi Lakshmi ,
wa_fieldcat-edit_mask = '==ALPHA'.
wa_fieldcat-edit_lzero = 'X'.
If this doesnt work.
<b>
Declare the field as type MARA-MATNR.
</b>
BCOZ conv routine for MATNR IS MATN1.
Usually, if all is well, this will be handled automatically, for example, if on a dynpro, all you need to do is set the conversion routine value to ALPHA, then the conversion will be automatic, nothing to code. If in a list display, the field should be TYPE MARA-MATNR, then the conversion will be automatic on the list display, as well as the ALV grid.
Reward points if helpful
Regards
Naresh -
Hi,
For some reason, whenever my circular buffer is filled and wraps around, right at that moment, my graph screws up for a split second by drawing a line across the graph. But for some reason, this doesn't happen all the time, only sometimes.
The picture is below:
Attachments:
graph jump.JPG 105 KBSorry, made a new thread since that one showed "Solved".
It seems the buffer works fine, something is wrong with the data being inserted in there. I don't know why it only messes up with that data.
I managed to capture some messed u p data. I will post it below.
Message Edited by Bilal_J on 04-12-2010 02:46 PM
Attachments:
Circular Buffer Debug.vi 17 KB
Circular Buffer.vi 39 KB
Circular Buffer Action Enum Typedef.ctl 5 KB -
Control unit problem with S750 speakers!
I just bought these things...
I installed everything as guided and specified, and I get sound for about 10 minutes perfectly without an issue. After, I flicked my sub "off", and back "on", and the control pod unit doesn't want to register when I press buttons on either the remote control or on the unit itself. I have no sound now and I'm very frustrated. Does anyone here think the control pod unit blew and I would need a replacement?The second fuse is not inside the plug. If you look at the back of the subwoofer, with the power cable disconnected from both the wall outlet and the subwoofer itself, you will see the socket where the power cable goes into. On the bottom part of the socket there is a cartridge with an indentation at the top. The words "use only with 250V fuse are etched on the front of this catridge and below the cartridge there is a printed triangle with the symbols 3.5A 250V. To access the fuse you need to insert a flat screw driver into the indentation at the top of the cartridge then using the top edge of the power socket as a leverage point, gently push the cartridge away from the subwoofer back panel. The fuse is located inside the cartridge. This fuse, if faulty, should be replaced with a time-lag 3.5A 250V fuse. But your fuse is ok because the green light on your subwoofer turns on.
-
Hi,
I just have executed a procedure and it did'nt work.
Instead of leaving the procedure i see lines numbers displayed without seing sql prompt.
I don't understand this and i would like to understand what happens exactly.
I would like even if the execution doesn't work to see the sql prompt after to work normally.
I have tried to write sql but it doesn't work.
How to do to success to see sql prompt after.
I have to say that all the modifications(updatings) i have done have disappeared.
Could you help me to arrange this.
Thanks to you.
NathalieNathalie,
Is this a question about HTML DB? What product are you using to execute the stored procedure? Can you explain the steps you used to execute the PL/SQL?
Sergio -
Hi Guru's
I have a problem with teh buffer, appears me a swap overflow
Can you tell me, what is teh correct parameter for this objects?
Export/import 85.33 40,000 391 1.15 20,000 4,177 20.89 157,816
Efficiency HITRATIO % 85
HITS 10,604,365
REQUESTS 12,427,632
DB access quality % 100
DB access 0
DB access saved 0
Reorgs 0
Size Allocated KB 40,000
Available KB 34,059
Used KB 29,842
Free KB 391
Directory entries Available 20,000
Used 15,823
Free 4,177
Swaps Objects swapped 9,810
Frames swapped 157,816
Resets Total 0
My current parameters are:
rsdb/obj/buffersize 40000 kB
rsdb/obj/max_objects 20000
rsdb/obj/large_object_size 8192 Bytes
rsdb/obj/mutex_n 0
And I have other prameter wrong
Initial records 98.38 17,250 1,699 10.62 10,000 6,044 60.44 9,469
Efficiency HITRATIO % 98
HITS 816,105
REQUESTS 829,581
DB access quality % 98
DB access 13,428
DB access saved 816,103
Reorgs 0
Size Allocated KB 17,250
Available KB 16,000
Used KB 14,301
Free KB 1,699
Directory entries Available 10,000
Used 3,956
Free 6,044
Swaps Objects swapped 9,469
Frames swapped 0
Resets Total 0
And my curretn parameters are:
rsdb/ntab/irbdsize 16000 kB
rsdb/ntab/entrycount 40000
I hope, you can help me!!
THANKS!!Hi Carlos,
From ST02 you can "current parameters" button, that will tell all current parameters per buffer.
You are bound to have swaps in some buffers altough ideally the number should be 0. Less than 10,000 a day is the maximum recommended by SAP.
Have a look at the history of the buffer and check when the swaps happened etc. Is it daily or a one off because something abnormal was running on the system a particular day.
Then check if the swaps happen because you're running out of space in the buffer or number of entries allowed. Then you can start thinking of tuning it.
Remenber that the swaps you see are since startup, so look at the history as well.
Let me know if you need any more help.
Pedro -
Multiple ALV Grid Controls per report - problem with default displ.variant
Hi,
I have a report with few screens called sequentialy. Each one of the screens has implemented own instance of ALV Grid Control within custom container, means:
- screen 100 has container Cont100 and grid control "grid100",
- screen 110 has container Cont110 and grid control "grid110"
- screen 120 has container Cont120 and grid control "grid120"
and so on...
Each one of the grid controls is initialized with own field catalog table, with own layout and variant structure definitions. My problem occurs when the user changes the display variant for some of the grid controls and save the layout variant using "default setting" checkbox. In this case next time the program is started all other grid controls behaves like they don't have their own variant definitions, but uses the default setting of the mentioned screen. This leads (usualy) to unsuable grid controls by default, because usualy different controls have no equal field-definition tables. I have the same behaviour even when there are more than 1 ALV grids on a single screen (for example - 2).
For now I don't provide variant variables at selection screen, but it seems there is no way to provide such variables for each one of the grid-controls.
Is anyone aware how to control this? Means no matter if there is default setting in use for some of the grid-controls, how to manipulate other grid-controls not to use this default setting?
Many thanks in advance.
Regards,
Ivaylo Mutafchievcheck this sample code which displays 4 grids in 4 different tabs and with 4 different handles
PROGRAM sapmzsdpp MESSAGE-ID z1.
Table Declarations *
TABLES:
vbpa, " Sales Document: Partner
kna1, " Customer Master
vbap. " Sales Document: Item Data
Tab Strip Declarations *
CONTROLS:
tabstrip_sdpp TYPE TABSTRIP. " Tabstrip
Constants declarations *
CONSTANTS:
c_rep_zm(2) TYPE c VALUE 'ZM', " Outside Sales Representative
c_rep_ve(2) TYPE c VALUE 'VE', " Inside Sales Representative
c_rep_zi(2) TYPE c VALUE 'ZI', " Sales Manager
c_abgru_08(2) TYPE c VALUE '08', " Reason for Rej: SO Not Closed
c_stock_ind_e TYPE c VALUE 'E', " Stock Idctr : Orders on hand
c_gauge(5) TYPE c VALUE 'GAUGE', " Characteristic Name - GAUGE
c_width(5) TYPE c VALUE 'WIDTH', " Characteristic Name - WIDTH
c_gauge_metric(12) " Character Name - GAUGE_METRIC
TYPE c VALUE 'GAUGE_METRIC',
c_width_metric(12) " Character Name - WIDTH_METRIC
TYPE c VALUE 'WIDTH_METRIC',
c_eng_metric(14) " Charac Value - ENGLISH_METRIC
TYPE c VALUE 'ENGLISH_METRIC',
c_coil(4) TYPE c VALUE 'COIL', " For Value COIL
c_spec_bf(7) TYPE c VALUE 'SPEC_BF'," Charac value SPEC_BF
c_wadat_ist(8) " Actual Goods Movement Date
TYPE c VALUE '00000000',
c_mcha(4) TYPE c VALUE 'MCHA', " Database Table 'MCHA'
c_classtype_022(3)
TYPE c VALUE '022', " Class Type : BATCH
c_pipe(2) TYPE c VALUE '06', " Material Pricing Group: Pipes
c_item_ctgry_ztam(4)
TYPE c VALUE 'ZTAM', " Item Cat:Certificate Mnfctr
c_lab_result(10) " Charac Value LAB_RESULT
TYPE n VALUE '0000001392',
c_none_reqd(10) " For Value NONE REQD
TYPE c VALUE 'NONE REQD.',
c_passed(6) TYPE c VALUE 'PASSED', " For Value PASSED
c_pending(12) TYPE c " For Value TEST PENDING
VALUE 'TEST PENDING',
c_bundling(13) " For Value TEST BUNDLING
TYPE c VALUE 'TEST BUNDLING',
c_normal(2) TYPE c VALUE '01'. " Priority: Normal
Internal Table Declarations *
DATA :
Internal table to hold common data for all reports
BEGIN OF t_common_data OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
vbeln LIKE vbap-vbeln, " Sales Document Number
posnr LIKE vbap-posnr, " Sales Document Item Number
ihrez_e LIKE vbkd-ihrez_e, " Mill Order Number
matnr LIKE vbap-matnr, " Material Number
pstyv LIKE vbap-pstyv, " Sales Document Item Category
kwmeng LIKE vbap-kwmeng, " Cumulative Order Quantity
lprio LIKE vbap-lprio, " Delivery Priority
werks LIKE vbap-werks, " Plant
kondm LIKE vbap-kondm, " Material Pricing Group
aedat LIKE vbap-aedat, " Date of Last Change
cuobj LIKE vbap-cuobj, " Configuration
saldata LIKE vbap-zzcust_req_avail,
" Required Availability Date
END OF t_common_data,
Internal table to hold Customer Number
BEGIN OF t_cust_temp OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
END OF t_cust_temp,
Internal table to hold stock details
BEGIN OF t_stock OCCURS 0,
vbeln LIKE mska-vbeln, " Sales Document Number
posnr LIKE mska-posnr, " Sales Document Item Number
matnr LIKE mska-matnr, " Material Number
werks LIKE mska-werks, " Plant
charg LIKE mska-charg, " Batch Number
kalab LIKE mska-kalab, " Valuated Stock
ersda LIKE mska-ersda,
END OF t_stock,
Internal table to hold deliveries
BEGIN OF t_delivery_data OCCURS 0,
vbeln LIKE lips-vbeln, " Delivery Document Number
vgbel LIKE lips-vgbel, " Document No of Ref Document
vgpos LIKE lips-vgpos, " Item No of Ref Item
END OF t_delivery_data,
Internal table to hold released tons & released days
BEGIN OF t_released_tons_days OCCURS 0,
vbeln LIKE likp-vbeln, " Delivery Document Number
btgew LIKE likp-btgew, " Total Weight
bldat LIKE likp-bldat, " Document Date in Document
END OF t_released_tons_days,
Internal table to hold Pre-Production-Pending Orders (Report-1)
BEGIN OF t_pre_prod_ord OCCURS 0,
sortl1 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e1 LIKE vbkd-ihrez_e, " Mill Order Number
salord1(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
days_entry LIKE zlgcyinfo-days_since_entry,
" Days Since Entry
dept LIKE zlgcyinfo-bklog, " Department
notes1 LIKE zcsimemo-text, " CSI File Memo Text
*/ Request No. DV2K904687
chng_date LIKE vbap-aedat, " Date of Last Change
END OF t_pre_prod_ord,
Internal table to hold Delinquent Orders (Report-2)
BEGIN OF t_delinquent_ord OCCURS 0,
sortl2 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e2 LIKE vbkd-ihrez_e, " Mill Order Number
salord2(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
schdate LIKE vbep-edatu, " Schedule Line Date
days_late LIKE zlgcyinfo-dayslate,
" Days Late
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
days_at_unit LIKE zlgcyinfo-daysatunit,
notes2 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_delinquent_ord,
Internal table to hold Processed Material Orders (Report-3)
BEGIN OF t_processed_ord OCCURS 0,
sortl3 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e3 LIKE vbkd-ihrez_e, " Mill Order Number
salord3(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
order_tons LIKE vbap-kwmeng, " Cumulative Order Quantity
fin_tons LIKE mska-kalab, " Val.Stock With Unres Usage
fin_days TYPE i, " Finished Days
rel_tons LIKE likp-btgew, " Total Weight
rel_days TYPE i, " No.of.Days Order is Released
status(15) TYPE c, " Status Of Stock
tb_tons LIKE zlgcyinfo-tons, " Tons
notes3 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_processed_ord,
Internal table to hold Flagged Orders (Report-4)
BEGIN OF t_flagged_ord OCCURS 0,
sortl4 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e4 LIKE vbkd-ihrez_e, " Mill Order Number
salord4(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
tons LIKE zlgcyinfo-tons, " Tons
priority LIKE vbap-lprio, " Delivery Priority
notes4 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_flagged_ord,
Internal table to hold CSI memo file data
BEGIN OF t_csi_memo_data OCCURS 0,
vbeln LIKE zcsimemo-vbeln, " Sales Document Number
posnr LIKE zcsimemo-posnr, " Sales Order line item
text LIKE zcsimemo-text, " CSI File Memo Text
END OF t_csi_memo_data,
Internal table to hold Customer Codes
BEGIN OF t_customer_code OCCURS 0,
sortl LIKE zcustcode-sortl, " Sort Field
kunnr LIKE zcustcode-kunnr, " Customer Number
END OF t_customer_code,
Internal table to hold schedule line dates
BEGIN OF t_schedule_line_date OCCURS 0,
vbeln LIKE vbep-vbeln, " Sales Document Number
posnr LIKE vbep-posnr, " Sales Document Item Number
edatu LIKE vbep-edatu, " Schedule line date
END OF t_schedule_line_date,
Internal table to hold Characteristic values
t_configuration
TYPE TABLE OF conf_out
WITH HEADER LINE,
Internal tables to hold legacy data
t_lgcyinfo TYPE TABLE OF zlgcyinfo
WITH HEADER LINE.
Work variables declarations *
DATA:
gv_parvw LIKE kupav-parvw, " Partner function
gv_abgru LIKE vbap-abgru, " Reason to eject sales order
gv_gauge LIKE conf_out-atwtb, " Charac Value Description
gv_width LIKE conf_out-atwtb, " Charac Value Description
gv_ok_code LIKE sy-ucomm, " Usercommand
gv_okcode LIKE sy-ucomm, " User Command
gv_number LIKE sy-dynnr
VALUE '0101', " Initial Sub Screen Number
gv_vbeln LIKE vbak-vbeln, " Sales Order
gv_posnr LIKE vbup-posnr, " Sales Item
*/ Request No. DV2K904687
gv_del_prio LIKE vbap-lprio, " Delivery Priority
gv_obj_key LIKE inob-objek, " Object Key
gv_config LIKE inob-cuobj, " Configuration
gv_lab_result LIKE ausp-atwrt, " Lab Result Value
gv_pass_stock LIKE mska-kalab, " Finished Stock
gv_fail_stock LIKE mska-kalab, " Failed Stock
gv_tp_tons LIKE mska-kalab, " Test Pending Tons
gv_csi_stock LIKE mbew-lbkum, " CSI Stock On Hand
gv_val_stock LIKE mska-kalab, " Valuated Stock
gv_fin_tons LIKE mska-kalab, " Finished Tons
gv_fin_days TYPE i, " Finished Days
gv_rel_tons LIKE likp-btgew, " Released Tons
gv_rel_days TYPE i, " Released Days
gv_no_delivery " Number of Delivery Documents
TYPE i,
gv_bund_tons LIKE zlgcyinfo-tons, " Bundling Tons
gv_net_weight LIKE mara-ntgew, " Net Weight
gv_tb_tons LIKE zlgcyinfo-tons, " Test/Bundling Tons
gv_date LIKE mska-ersda, " Date
gv_tabix LIKE sy-tabix, " Table Index
gv_flg TYPE c, " Flag Variable
gv_exit TYPE c. " For Parameter Exit
Constant declarations for ALV Grid *
CONSTANTS:
c_cont_pre_prod_ord
TYPE scrfname VALUE 'CUST_PPP',
" Custom Container for Report-1
c_cont_delinquent_ord
TYPE scrfname VALUE 'CUST_DIP',
" Custom Container for Report-2
c_cont_processed_ord
TYPE scrfname VALUE 'CUST_PMS',
" Custom Container for Report-3
c_cont_flagged_ord
TYPE scrfname VALUE 'CUST_FLGORD',
" Custom Container for Report-4
c_handle1(3) TYPE c VALUE 'G_1', " Handle for PPP rpt Grid
c_handle2(3) TYPE c VALUE 'G_2', " Handle for DIP rpt Grid
c_handle3(3) TYPE c VALUE 'G_3', " Handle for PMS rpt Grid
c_handle4(3) TYPE c VALUE 'G_4', " Handle for FLGORD rpt Grid
c_true TYPE c VALUE 'X', " For value 'X'
c_save TYPE c VALUE 'A'. " User-Defd & Global Variants
Selection Screen *
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-014.
PARAMETERS :
p_osr RADIOBUTTON GROUP g1
DEFAULT 'X', " Outside Sales Representative
p_isr RADIOBUTTON GROUP g1, " Inside Sales Representative
p_s_mgr RADIOBUTTON GROUP g1. " Sales Manager
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-005.
SELECT-OPTIONS:
s_pernr FOR vbpa-pernr
OBLIGATORY, " Employee Number
s_kunnr FOR kna1-kunnr, " Customer Number
s_sortl FOR kna1-sortl, " Customer Search Term
s_kondm FOR vbap-kondm. " Material Pricing Group
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-006.
PARAMETERS:
p_open RADIOBUTTON GROUP g2
DEFAULT 'X', " Open Orders
p_closed RADIOBUTTON GROUP g2. " Closed Orders
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-007.
PARAMETERS:
p_var1 LIKE disvariant-variant, " Variant For Report-1
p_var2 LIKE disvariant-variant, " Variant For Report-2
p_var3 LIKE disvariant-variant, " Variant For Report-3
p_var4 LIKE disvariant-variant. " Varinat For Report-3
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF SCREEN 500.
*/ Begin of Modification - Request No. DV2K904687
Selection Screen for Changing Sales Order Priority
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b5 WITH FRAME TITLE text-044.
PARAMETERS p_sonum LIKE vbap-vbeln." Sales Order Number
SELECT-OPTIONS s_item FOR vbap-posnr." Sales Order Item
PARAMETERS p_delpr LIKE vbap-lprio." Delivery Priority
SELECTION-SCREEN END OF BLOCK b5.
SELECTION-SCREEN END OF SCREEN 1100.
*/ End of Modification - Request No. DV2K904687
CLASS lcl_gv_event_receiveriver DEFINITION *
CLASS lcl_event_receiver DEFINITION DEFERRED.
ALV Grid - Work Variables Declarations *
DATA:
gv_cont_pre_prod_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-1
gv_cont_delinquent_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-2
gv_cont_processed_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-3
gv_cont_flagged_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-4
gv_grid_pre_prod_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-1
gv_grid_delinquent_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-2
gv_grid_processed_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-3
gv_grid_flagged_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-4
gv_event_receiver TYPE REF
TO lcl_event_receiver,
" Object For Local Class
gs_lay_pre_prod_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_delinquent_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_processed_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_flagged_ord TYPE lvc_s_layo,
" Work Area for Grid Layout
gs_var_pre_prod_ord TYPE disvariant,
" Layout Structure
gs_var_delinquent_ord TYPE disvariant,
" Layout Structure
gs_var_processed_ord TYPE disvariant,
" Layout Structure
gs_var_flagged_ord TYPE disvariant,
" Layout Structure
t_fcat_pre_prod_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-1
t_fcat_delinquent_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-2
t_fcat_processed_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-3
t_fcat_flagged_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-4
t_exclude TYPE ui_functions,
" Function Code Table
gs_exclude TYPE ui_func. " Function Code Structure
CLASS lcl_gv_event_receiver DEFINITION *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_top_of_page
FOR EVENT print_top_of_page OF cl_gui_alv_grid,
*/ Begin of Modification - Request No. DV2K904687
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER DEFINITION
CLASS IMPLEMENTATION *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_hotspot.
CASE e_column_id-fieldname.
WHEN 'SALORD1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_pre_prod_ord-salord1.
WHEN 'SALORD2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_delinquent_ord-salord2.
WHEN 'SALORD3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_processed_ord-salord3.
WHEN 'SALORD4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_flagged_ord-salord4.
WHEN 'SORTL1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_pre_prod_ord-sortl1.
WHEN 'SORTL2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_delinquent_ord-sortl2.
WHEN 'SORTL3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_processed_ord-sortl3.
WHEN 'SORTL4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_flagged_ord-sortl4.
WHEN 'IHREZ_E1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_pre_prod_ord-ihrez_e1.
WHEN 'IHREZ_E2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_delinquent_ord-ihrez_e2.
WHEN 'IHREZ_E3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_processed_ord-ihrez_e3.
WHEN 'IHREZ_E4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_flagged_ord-ihrez_e4.
WHEN 'NOTES1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_pre_prod_ord-salord1.
WHEN 'NOTES2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_delinquent_ord-salord2.
WHEN 'NOTES3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_processed_ord-salord3.
WHEN 'NOTES4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_flagged_ord-salord4.
ENDCASE. " CASE E_COLUMN_ID ...
ENDMETHOD. " HANDLE_HOTSPOT
METHOD handle_top_of_page.
PERFORM write_report_header.
ENDMETHOD. " METHOD HANDLE_TOP_OF_PAGE
*/ Begin of Modification - Request No. DV2K904687
METHOD handle_toolbar.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
append a button for Change Delivery Priority
MOVE 'CHNG_PRIO' TO ls_toolbar-function.
MOVE 'Change SO Delivery Priority'(048)
TO ls_toolbar-quickinfo.
MOVE 'Change SO Priority'(049) TO ls_toolbar-text.
MOVE 0 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " handle_toolbar
METHOD handle_user_command.
DATA: t_sel_row TYPE lvc_t_roid,
gs_sel_row TYPE lvc_s_roid,
gs_flagged_ord LIKE t_flagged_ord,
lv_lines TYPE i.
CASE e_ucomm.
WHEN 'CHNG_PRIO'.
REFRESH t_sel_row.
CLEAR e_ucomm.
CALL METHOD gv_grid_flagged_ord->get_selected_rows
IMPORTING
et_row_no = t_sel_row.
CLEAR: t_flagged_ord,
gv_vbeln,
gv_posnr,
gv_del_prio.
DESCRIBE TABLE t_sel_row LINES lv_lines.
IF lv_lines GT 1.
MESSAGE i001 WITH 'Select only one row'(043).
ELSEIF lv_lines EQ 1.
READ TABLE t_sel_row INTO gs_sel_row INDEX 1.
READ TABLE t_flagged_ord INTO gs_flagged_ord
INDEX gs_sel_row-row_id.
IF sy-subrc EQ 0.
SPLIT gs_flagged_ord-salord4 AT '-' INTO gv_vbeln gv_posnr.
gv_del_prio = gs_flagged_ord-priority.
CLEAR: s_item, s_item[].
p_sonum = gv_vbeln.
p_delpr = gv_del_prio.
s_item-low = gv_posnr.
APPEND s_item TO s_item.
CLEAR s_item.
ENDIF. " IF sy-subrc EQ 0
ENDIF. " IF lv_lines GT 1
IF lv_lines LE 1.
CALL SELECTION-SCREEN '1100' STARTING AT 30 2
ENDING AT 110 7.
LEAVE TO SCREEN 100.
ENDIF.
ENDCASE. " CASE e_ucomm
ENDMETHOD. " handle_user_command
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER
" IMPLEMENTATION
Form WRITE_REPORT_HEADER *
This subroutine displays Report Header which includes *
Report Name, Executed by, Execution date, Execution Time *
There are no parameters to be passed to this subroutine *
FORM write_report_header.
DATA lv_rep_tit(72) TYPE c.
FORMAT COLOR COL_KEY.
MOVE sy-title TO lv_rep_tit.
CONDENSE lv_rep_tit.
SKIP 1.
WRITE: /3 sy-repid,
25 'California Steel Industries, Inc.'(040),
75 'Page'(041),
80(4) sy-pagno.
WRITE: /3 sy-uzeit,
25 lv_rep_tit,
75 sy-datum.
FORMAT RESET.
ENDFORM. " WRITE_REPORT_HEADER
At selection-output *
AT SELECTION-SCREEN OUTPUT.
CLEAR sy-ucomm.
IF sy-dynnr EQ '0500'.
Initialize layout variant for report-1
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM initialize_layoutvariant CHANGING gs_var_pre_prod_ord.
p_var1 = gs_var_pre_prod_ord-variant.
Initialize layout variant for report-2
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM initialize_layoutvariant CHANGING gs_var_delinquent_ord.
p_var2 = gs_var_delinquent_ord-variant.
Initialize layout variant for report-3
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM initialize_layoutvariant CHANGING gs_var_processed_ord.
p_var3 = gs_var_processed_ord-variant.
Initialize layout variant for report-4
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM initialize_layoutvariant CHANGING gs_var_flagged_ord.
p_var4 = gs_var_flagged_ord-variant.
*/ Begin of Modification - Request No. DV2K904687
ELSEIF sy-dynnr EQ '1100'.
DATA t_exclude TYPE TABLE OF sy-ucomm.
SET PF-STATUS 'MENU_1100'.
To use your own GUI status for a selection screen
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = 'MENU_1100'
TABLES
p_exclude = t_exclude.
ENDIF. " IF sy-dynnr EQ '0500'
*/ End of Modification - Request No. DV2K904687
At Selection Screen *
AT SELECTION-SCREEN.
*/ Begin of Modification - Request No. DV2K904687
CASE sy-dynnr.
WHEN '1100'.
IF sy-ucomm IS INITIAL.
CLEAR sy-ucomm.
LEAVE TO SCREEN 1100.
ENDIF. " IF sy-ucomm IS INITIAL
CASE sy-ucomm.
WHEN 'SAVE'.
CLEAR sy-ucomm.
Change Delivery Priority using BAPI method
PERFORM change_del_priority.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
ENDCASE. " CASE sy-ucomm
WHEN '0500'.
IF sy-ucomm EQ 'CRET'.
LEAVE TO SCREEN 100.
ELSEIF sy-ucomm IS INITIAL.
LEAVE TO SCREEN 500.
ENDIF. " IF SY-UCOMM EQ 'CRET'
ENDCASE. " CASE sy-dynnr
*/ End of Modification - Request No. DV2K904687
Selection Screen: Validations *
AT SELECTION-SCREEN ON s_pernr.
Validate Employee Number
PERFORM validate_employee_number.
AT SELECTION-SCREEN ON s_kunnr.
Validate Customer Number
IF NOT s_kunnr IS INITIAL.
PERFORM validate_customer_number.
ENDIF. " IF NOT S_KUNNR IS INITIAL
AT SELECTION-SCREEN ON s_sortl.
Validate Search Term
IF NOT s_sortl IS INITIAL.
PERFORM validate_search_term.
ENDIF. " IF NOT S_SORTL IS INITIAL
AT SELECTION-SCREEN ON s_kondm.
Validate Product
IF NOT s_kondm IS INITIAL.
PERFORM validate_product.
ENDIF. " IF NOT S_KONDM IS INITIAL
Validate p_var1
AT SELECTION-SCREEN ON p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
gs_var_pre_prod_ord-variant = p_var1.
IF p_var1 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_pre_prod_ord.
ENDIF. " IF P_VAR1 IS NOT INITIAL
Validate p_var2
AT SELECTION-SCREEN ON p_var2.
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
gs_var_delinquent_ord-variant = p_var2.
IF p_var2 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_delinquent_ord.
ENDIF. " IF P_VAR2 IS NOT INITIAL
Validate p_var3
AT SELECTION-SCREEN ON p_var3.
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
gs_var_processed_ord-variant = p_var3.
IF p_var3 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_processed_ord.
ENDIF. " IF P_VAR3 IS NOT INITIAL
Validate p_var4
AT SELECTION-SCREEN ON p_var4.
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
gs_var_flagged_ord-variant = p_var4.
IF p_var4 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_flagged_ord.
ENDIF. " IF P_VAR4 IS NOT INITIAL
Selection Screen: Value Request for ALV GRID Variants *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM f4_variant CHANGING gs_var_pre_prod_ord
gv_exit.
IF gv_exit NE c_true.
p_var1 = gs_var_pre_prod_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var2
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var2.
CLEAR:
gs_var_delinquent_ord,
gv_exit.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM f4_variant CHANGING gs_var_delinquent_ord
gv_exit.
IF gv_exit NE c_true.
p_var2 = gs_var_delinquent_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var3
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var3.
CLEAR:
gs_var_processed_ord,
gv_exit.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM f4_variant CHANGING gs_var_processed_ord
gv_exit.
IF gv_exit NE c_true.
p_var3 = gs_var_processed_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var4
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var4.
CLEAR:
gs_var_flagged_ord,
gv_exit.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM f4_variant CHANGING gs_var_flagged_ord
gv_exit.
IF gv_exit NE c_true.
p_var4 = gs_var_flagged_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
Form validate_employee_number *
This subroutine validates Employee Number *
There are no parameters to need be passed to this subroutine *
FORM validate_employee_number.
DATA lv_pernr LIKE vbpa-pernr.
SELECT SINGLE pernr
INTO lv_pernr
FROM vbpa
WHERE pernr IN s_pernr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-010.
ENDIF. " IF SY-SUBRC NE 0
CLEAR lv_pernr.
ENDFORM. " VALIDATE_EMPLOYEE_NUMBER
Form validate_customer_number *
This subroutine validates Customer Number *
There are no parameters need to be passed to this subroutine *
FORM validate_customer_number.
SELECT SINGLE kunnr
INTO t_common_data-kunnr
FROM kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-011.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_common_data-kunnr.
ENDFORM. " VALIDATE_CUSTOMER_NUMBER
Form validate_search_term *
This subroutine validates Search Term *
There are no parameters need to be passed to this subroutine *
FORM validate_search_term.
SELECT SINGLE sortl
INTO t_customer_code-sortl
FROM kna1
WHERE sortl IN s_sortl.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-012.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_customer_code-sortl.
ENDFORM. " VALIDATE_SEARCH_TERM
Form validate_product *
This subroutine validates Product *
There are no parameters need to be passed to this subroutine *
FORM validate_product.
SELECT SINGLE kondm
INTO t_
Maybe you are looking for
-
Hello, I am using the Table Group component for displaying data in my application designed in Java Studio Creator. I have enabled paging on the component. I use CachedRowSet on the bean for the page for getting the data. This works very well at the m
-
Language Conversion : Getting junk character in excel file
Hi Experts, I am getting one issue while sending data in form of email. I have certain data in ALV output & I am sending that data through email using one custom function module. This function module is sending data as ZIPPED file. If we open the ZIP
-
Convert from SQL server to Oracle?
How do I do this query in Oracle? In SQL Server, it looks like this. select SELECT top 1 t1.mpm FROM TblMtk T1 where t1.wc = '34819' and t1.ValidFrom <= '2012-09-12' order by t1.ValidFrom desc ) R1 SELECT top 1 t2.mpm FROM TblMtk T2 where t2.wc = '34
-
I am looking for Mac OS X programmer for AppStore
Hi I am looking for a programmer for one interesting project. All additional details in person contact. <Edited by Host> Alex.
-
Ultiboard 9 won't export separate Gerber layers
I just modified a circuit that I had built earlier (this is revision 2) and when I tried to export it, each layer gave me the same file "xxx.gbr". I tried all kinds of things, but always the same. I finally changed the ending of each layer file to