Problem with swap
Hi Guru's
I have a problem with teh buffer, appears me a swap overflow
Can you tell me, what is teh correct parameter for this objects?
Export/import 85.33 40,000 391 1.15 20,000 4,177 20.89 157,816
Efficiency HITRATIO % 85
HITS 10,604,365
REQUESTS 12,427,632
DB access quality % 100
DB access 0
DB access saved 0
Reorgs 0
Size Allocated KB 40,000
Available KB 34,059
Used KB 29,842
Free KB 391
Directory entries Available 20,000
Used 15,823
Free 4,177
Swaps Objects swapped 9,810
Frames swapped 157,816
Resets Total 0
My current parameters are:
rsdb/obj/buffersize 40000 kB
rsdb/obj/max_objects 20000
rsdb/obj/large_object_size 8192 Bytes
rsdb/obj/mutex_n 0
And I have other prameter wrong
Initial records 98.38 17,250 1,699 10.62 10,000 6,044 60.44 9,469
Efficiency HITRATIO % 98
HITS 816,105
REQUESTS 829,581
DB access quality % 98
DB access 13,428
DB access saved 816,103
Reorgs 0
Size Allocated KB 17,250
Available KB 16,000
Used KB 14,301
Free KB 1,699
Directory entries Available 10,000
Used 3,956
Free 6,044
Swaps Objects swapped 9,469
Frames swapped 0
Resets Total 0
And my curretn parameters are:
rsdb/ntab/irbdsize 16000 kB
rsdb/ntab/entrycount 40000
I hope, you can help me!!
THANKS!!
Hi Carlos,
From ST02 you can "current parameters" button, that will tell all current parameters per buffer.
You are bound to have swaps in some buffers altough ideally the number should be 0. Less than 10,000 a day is the maximum recommended by SAP.
Have a look at the history of the buffer and check when the swaps happened etc. Is it daily or a one off because something abnormal was running on the system a particular day.
Then check if the swaps happen because you're running out of space in the buffer or number of entries allowed. Then you can start thinking of tuning it.
Remenber that the swaps you see are since startup, so look at the history as well.
Let me know if you need any more help.
Pedro
Similar Messages
-
Problem with swap files after reboot.
Hello
I have installed Solaris 10 10/09 s10x_u8wos_08a on a Sun Fire X4140.
The file system is UFS.
I wish to add more swap space
I have created these two files under /export/home:
-rw------T 1 root root 5368709120 Jun 16 10:12 newswap
-rw------T 1 root root 2147483648 Jun 16 10:38 newswap2
When I enter swap -a /export/home/newswap, the command succeeds and I can see the additional swapspace with swap -l.
I have the following configuration in /etc/vfstab
# cat /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c1t5d0s1 - - swap - no -
/dev/dsk/c1t5d0s0 /dev/rdsk/c1t5d0s0 / ufs 1 no -
/dev/dsk/c1t5d0s7 /dev/rdsk/c1t5d0s7 /export/home ufs 2 yes -
/export/home/newswap - - swap - no -
/export/home/newswap2 - - swap - no -
/devices - /devices devfs - no -
sharefs - /etc/dfs/sharetab sharefs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
Although it is supposed to work, after reboot, the only mounted swap file is /dev/dsk/c1t5d0s1.
The two file under /export/home aren't mounted as swap. Why?
Can anybody give me some help on this issue?
ThanksActually you don't have to create a dedicated slice/filesystem for swap.
You can create files and then use them as swap.
Here is the link from the documentation of Solaris
http://docs.sun.com/app/docs/doc/817-5093/fsswap-59089?a=view
My issue is that although I have configured /etc/vfstab according to the documentation, the swap files aren't automatically mounted on boot. I can only mount them as swap manually with swap -a.
Can anybody help? -
Hi All,
Using Oracle 10gR1, Solaris 9.
prtconf | grep "Memory size"
Memory size: 16384 Megabytesswap space is 16g
Pga_aggregate_target = 2G and after checking the v$pga_target_advice, it shows optimal.
Currently we have a issue of swap space getting used up nearly 100%. The system was out of memory and can't run any application
Alert logs error;
ORA-07445: exception encountered: core dump [_aio_free_stack_unlocked()+72] [SIGBUS] [Object specific hardware error] [0xFFFFFFFF7B602000] [] []
ORA-00600: internal error code, arguments: [ksnpost:ksnigb], [], [], [], [], [], [], []
ORA-04030: out of process memory when trying to allocate 588408 bytes (pga heap,kco buffer)On checking Metalink note, it said its an unhandled Oracle exception; have to increase the swap space.
AWR excerpt;
Cache Sizes (end)
~~~~~~~~~~~~~~~~~
Buffer Cache: 4,848M Std Block Size: 8K
Shared Pool Size: 3,985M Log Buffer: 1,024K
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 63,328.92 2,116.68
Logical reads: 4,946.83 165.34
Block changes: 257.73 8.61
Physical reads: 1,267.50 42.36
Physical writes: 72.44 2.42
User calls: 385.83 12.90
Parses: 84.22 2.81
Hard parses: 0.04 0.00
Sorts: 10.53 0.35
Logons: 0.14 0.00
Executes: 211.35 7.06
Transactions: 29.92
% Blocks changed per Read: 5.21 Recursive Call %: 13.56
Rollback per transaction %: 0.29 Rows per Sort: 94.72
Top 5 Timed Events
~~~~~~~~~~~~~~~~~~ % Total
Event Waits Time (s) DB Time Wait Class
row cache lock 16,498 45,001 43.44 Concurrency
log file switch (checkpoint in 30,766 30,281 29.23 Configuration
db file sequential read 2,873,716 10,796 10.42 User I/O
buffer busy waits 8,870 8,718 8.42 Concurrency
db file parallel write 421 3,848 3.71 System I/O
-------------------------------------------------------------On increasing the swap space, and restarting the instance, the system was normal.
Now why does oracle use up all the swap space and what can be the workaround to avoid this in future?Verma wrote:
Using Oracle 10gR1, Solaris 9.
swap space is 16gOracle 10gR2 swap space recommendations are:
- 1 GB - 2 GB = 1.5 times the size of RAM
- 2 GB - 8 GB = equal to the size of RAM
- Greater than 8GB = 0.75 times the size of RAM
Currently we have a issue of swap space getting used up nearly 100%. The system was out of memory and can't run any applicationThat is unusual and should not be happening when you have what seems to be an excess of memory available. This could mean some kind of bug (memory leakage for example), or it could mean plain old fashion abuse of memory. Like PL/SQL code that attempts to bulk fetch a few million rows from the database with a single go.
On checking Metalink note, it said its an unhandled Oracle exception; have to increase the swap space.Wrong IMO (unless you were not following the recommended swap size factor). If you have have a giant swap area..moving the wall a few meters away (by increasing swap) will only enable you to run faster into it - I doubt that this is the intent of that Metalink note.
On increasing the swap space, and restarting the instance, the system was normal.
Now why does oracle use up all the swap space and what can be the workaround to avoid this in future?Oracle only use what is needed to perform the client requests that it receives. If the client request a mountain of data to be moved/processed, Oracle will try to oblige. If that mountain topples and crushes server resources, it is not Oracle that is to blame for trying to do exactly what was requested from it. -
Having problems with swap image (roll over effect)
I am trying to do a roll over state (swap image) for a linked item on my mock up. I've done this for other pages in the same file, but for some reason on another page, when I build the second state, insert the slice, and create the swap image on the first state, it previews in the browser with just a white screen and the section that I sliced. How come it is showing a white page in lieu of my entire mock up with the roll over effect?
I am trying to do a roll over state (swap image) for a linked item on my mock up. I've done this for other pages in the same file, but for some reason on another page, when I build the second state, insert the slice, and create the swap image on the first state, it previews in the browser with just a white screen and the section that I sliced. How come it is showing a white page in lieu of my entire mock up with the roll over effect?
-
Problem with swap depths in Flash
I am attempting to swap depths on 9 items on a web page and
it does work and comes to the front but them it seems to get
confused and all of them form behind comes to the top...
the code I am attempting ot use is:
on (press, dragOver) {
startDrag(_root.btnb);
on (release, rollOut, dragOut) {
stopDrag();
on (rollOver) {
_root.x +=2;
_root.btnb.swapDepths(_root.x);
seen at:
http://clients.id8creative.com/wgp%5Fcompany/index_785.html
thanks in advance to anyoen who can hlp me with this..
jennyTwo things to try:
disable Hardware Acceleration (Flash Player Settings)
update the device drivers for your display adapter -
I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?
In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets. -
Macbook Pro 2011, Swap SSID against Multidrive. Problems with Bootcamp Installation.
Hi guys,
Whilst waiting for the release of drivers for Bootcamp to update to Windows 8 I thought I just tell you about my expieriencw with an SSID Upgrade I just purchased from GRAVIS in Germany for my MBP 2011. 13 inch I7.
I had originally a 750 GB Drive in my MBP but as I am working wiht Photshop and a have to store a lot of Photos on my HD I was absolutly fond of an offer I found recently in the latest GRAVIS Germany Flyer. ( Gravis is one of the biggest Apple Retailer in Germany)
They offered to swap `HD against a 50 GB SSID and built in the original HD in the Slot of the internal Multidrive. The Multidrive gets build in into a external case.
Wow. Everything done, including clone of HD to SSID for 399 Euros.
I called them on the phone, talked it through with them and took the Macbook there for the change.
The plan was that they do copy just the MAC OS Parition and I do a fresh Bootcamp Installation myself as I plned to update to Windows 8 anyway and for this I wanted to have a fresh Window 7 Intallation on Bootcamp.
So far so good.
I picked up my Mackbook, rebuildet in the way discribed and wanted to install bootcamp at home.
Done it several times on my own, have never had a problem but this time I had no chance. The problem was that in the moment the Windows installation should start the mashine looks for the internal drive and goes into Notebook Nirvana and thats it. And there is no easy work around.
My husband ( software engineer) and me tried a whole evening without success. Took my Macbooc back the next morning to Gravis. They laughed...of course, they are experts and know better...ha..ha.... than they tried everything what I told them we tried the night before ourselfs and in the end after hours they swapped the HD against the Multidrive back , installed Bootcamp and Windows 7 and rebuild again.
Anyway, I had my Bootcamp back but I I was no way satisfied with this solution as I have to say I dont imagine ever time I want to reinstall my Bootcamp from now first driving to Gravis and get my Hardware swapped, install it and swapp it back. I was really disapinonted as I expect as a customer that a Apple retailer knows about problems which could occure when you swap hardware on a macbook and tells you about this problem BEFORE and of course have an aceptable solution for this problem or tell you not to do it when you have got or plan at any time a bootcamp installation on your mashine.
I was totaly frustrated and called the Apple support about it.
I just could not accept this because there are so many other devices wihtout an internal drive in the Apple produkt range that I was sure there must be another solution for this problem.
The guy in the hotline was very helpful, As expected he never heard about a problem like hits before but he went to the back office at once and talked the problem through.
He called me back about it a bit later. I did not try the solution which he sugested but I will do it next time. First at all he confirmed that its not possible for a Macbook Pro which gets delivered with an internal drive to install bootcamp from an external drive.
The Macbook Airs without internal drives getting delivered with a different version of bootcamp. As far as I undestood him you cant install this different Bootcampversion on your MBP.
This Bootcampversions have one more step in their installion routine and this is to create a bootable USB Stick within the installion from which than the MB starts when MY MBP was disappearing into the Nirvana because it could not find the internal drive.
The idea now is to go to an Apple shop with your Windows installation CD/ DVD, to ask a nice person there to allow you to use an MB Air and produce with this the bootable stick. And than go home and try it on your MBP.
Certainly not an easy solution and I dont even know if it would work but still better that rebuilding your Macbook for every new installion of Bootcamp.
Anybody ever tried this?
Maybe there are other possibilitie? Anybody found out something else?
Thought I let you know for the case anybody stumbles about the same problems after swapping his internal drive with a HD oder SSID.
Kind regards KattinkaHi guys,
Whilst waiting for the release of drivers for Bootcamp to update to Windows 8 I thought I just tell you about my expieriencw with an SSID Upgrade I just purchased from GRAVIS in Germany for my MBP 2011. 13 inch I7.
I had originally a 750 GB Drive in my MBP but as I am working wiht Photshop and a have to store a lot of Photos on my HD I was absolutly fond of an offer I found recently in the latest GRAVIS Germany Flyer. ( Gravis is one of the biggest Apple Retailer in Germany)
They offered to swap `HD against a 50 GB SSID and built in the original HD in the Slot of the internal Multidrive. The Multidrive gets build in into a external case.
Wow. Everything done, including clone of HD to SSID for 399 Euros.
I called them on the phone, talked it through with them and took the Macbook there for the change.
The plan was that they do copy just the MAC OS Parition and I do a fresh Bootcamp Installation myself as I plned to update to Windows 8 anyway and for this I wanted to have a fresh Window 7 Intallation on Bootcamp.
So far so good.
I picked up my Mackbook, rebuildet in the way discribed and wanted to install bootcamp at home.
Done it several times on my own, have never had a problem but this time I had no chance. The problem was that in the moment the Windows installation should start the mashine looks for the internal drive and goes into Notebook Nirvana and thats it. And there is no easy work around.
My husband ( software engineer) and me tried a whole evening without success. Took my Macbooc back the next morning to Gravis. They laughed...of course, they are experts and know better...ha..ha.... than they tried everything what I told them we tried the night before ourselfs and in the end after hours they swapped the HD against the Multidrive back , installed Bootcamp and Windows 7 and rebuild again.
Anyway, I had my Bootcamp back but I I was no way satisfied with this solution as I have to say I dont imagine ever time I want to reinstall my Bootcamp from now first driving to Gravis and get my Hardware swapped, install it and swapp it back. I was really disapinonted as I expect as a customer that a Apple retailer knows about problems which could occure when you swap hardware on a macbook and tells you about this problem BEFORE and of course have an aceptable solution for this problem or tell you not to do it when you have got or plan at any time a bootcamp installation on your mashine.
I was totaly frustrated and called the Apple support about it.
I just could not accept this because there are so many other devices wihtout an internal drive in the Apple produkt range that I was sure there must be another solution for this problem.
The guy in the hotline was very helpful, As expected he never heard about a problem like hits before but he went to the back office at once and talked the problem through.
He called me back about it a bit later. I did not try the solution which he sugested but I will do it next time. First at all he confirmed that its not possible for a Macbook Pro which gets delivered with an internal drive to install bootcamp from an external drive.
The Macbook Airs without internal drives getting delivered with a different version of bootcamp. As far as I undestood him you cant install this different Bootcampversion on your MBP.
This Bootcampversions have one more step in their installion routine and this is to create a bootable USB Stick within the installion from which than the MB starts when MY MBP was disappearing into the Nirvana because it could not find the internal drive.
The idea now is to go to an Apple shop with your Windows installation CD/ DVD, to ask a nice person there to allow you to use an MB Air and produce with this the bootable stick. And than go home and try it on your MBP.
Certainly not an easy solution and I dont even know if it would work but still better that rebuilding your Macbook for every new installion of Bootcamp.
Anybody ever tried this?
Maybe there are other possibilitie? Anybody found out something else?
Thought I let you know for the case anybody stumbles about the same problems after swapping his internal drive with a HD oder SSID.
Kind regards Kattinka -
Having Problems With The Neo2 ? Read This!!!!
Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :DOk.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world -
Java API, problem with secondary keys using multi key creator
Hi,
I'm developing an application that inserts a few 100k or so records into a Queue DB, then access them using one of four Hash SecondaryDatabases. Three of these secondary dbs use a SecondaryMultiKeyCreator to generate the keys, and one uses a SecondaryKeyCreator. As a test, I'm trying to iterate through each secondary key. When trying to iterate through the keys of any of the secondary databases that use a SecondaryMultiKeyCreator, I have problems. I'm attempting to iterate through the keys by:
1: creating a StoredMap of the SecondaryDatabase
2: getting a StoredKeySet from said map
3: getting a StoredIterator on said StoredKeySet
4: iterate
The first call to StoredIterator.next() fails at my key binding (TupleBinding) because it is only receiving 2 bytes of data for the key, when it should be getting more, so an Exception is thrown. I suspected a problem with my SecondaryMultiKeyCreator, so I added some debug code to check the size of the DatabaseEntries it creates immediately before adding them to the results key Set. It checks out right. I also checked my key binding like so:
1: use binding to convert the key object to a DatabaseEntry
2: use binding to convert the created DatabaseEntry back to a key object
3: check to see if the old object contains the same data as the new one
Everything checked out ok.
What it boils down to is this: my key creator is adding DatabaseEntries of the correct size to the results set, but when the keys are being read back later on, my key binding is only receiving 2 bytes of data. For the one SecondaryDatabase that doesn't use a SecondaryMultiKeyCreator, but just a SecondaryKeyCreator, there are no issues and I am able to iterate through its secondary keys as expected.
EDIT: New discovery: if I only add ONE DatabaseEntry to the results set in my SecondaryMultiKeyCreator, I am able to iterate through the keys as I would like to.
Any ideas or suggestions?
Thank you for your attention,
-Justin
Message was edited by:
SteamrollerHi Justin,
Sorry about the delayed response here. I have created a patch that resolves the problem.
If you apply the patch to your 4.6.21 source tree, and then rebuild Berkeley DB, the improper behavior should be resolved.
Regards,
Alex
diff -rc db/db_am.c db/db_am.c
*** db/db_am.c Thu Jun 14 04:21:30 2007
--- db/db_am.c Fri Jun 13 11:20:28 2008
*** 331,338 ****
F_SET(dbc, DBC_TRANSIENT);
! switch (flags) {
! case DB_APPEND:
* If there is an append callback, the value stored in
* data->data may be replaced and then freed. To avoid
--- 331,337 ----
F_SET(dbc, DBC_TRANSIENT);
! if (flags == DB_APPEND && LIST_FIRST(&dbp->s_secondaries) == NULL) {
* If there is an append callback, the value stored in
* data->data may be replaced and then freed. To avoid
*** 367,388 ****
- * Secondary indices: since we've returned zero from an append
- * function, we've just put a record, and done so outside
- * __dbc_put. We know we're not a secondary-- the interface
- * prevents puts on them--but we may be a primary. If so,
- * update our secondary indices appropriately.
- * If the application is managing this key's data, we need a
- * copy of it here. It will be freed in __db_put_pp.
- DB_ASSERT(dbenv, !F_ISSET(dbp, DB_AM_SECONDARY));
- if (LIST_FIRST(&dbp->s_secondaries) != NULL &&
- (ret = __dbt_usercopy(dbenv, key)) == 0)
- ret = __db_append_primary(dbc, key, &tdata);
* The append callback, if one exists, may have allocated
* a new tdata.data buffer. If so, free it.
--- 366,371 ----
*** 390,401 ****
/* No need for a cursor put; we're done. */
goto done;
! default:
! /* Fall through to normal cursor put. */
! break;
! if (ret == 0)
ret = __dbc_put(dbc,
key, data, flags == 0 ? DB_KEYLAST : flags);
--- 373,379 ----
/* No need for a cursor put; we're done. */
goto done;
! } else
ret = __dbc_put(dbc,
key, data, flags == 0 ? DB_KEYLAST : flags);
diff -rc db/db_cam.c db/db_cam.c
*** db/db_cam.c Tue Jun 5 21:46:24 2007
--- db/db_cam.c Thu Jun 12 16:41:29 2008
*** 899,905 ****
DB_ENV *dbenv;
DB dbp, sdbp;
DBC dbc_n, oldopd, opd, sdbc, *pdbc;
! DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey;
DBT all_skeys, skeyp, *tskeyp;
db_pgno_t pgno;
int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
--- 899,905 ----
DB_ENV *dbenv;
DB dbp, sdbp;
DBC dbc_n, oldopd, opd, sdbc, *pdbc;
! DBT olddata, oldpkey, newdata, pkey, temppkey, tempskey, tdata;
DBT all_skeys, skeyp, *tskeyp;
db_pgno_t pgno;
int cmp, have_oldrec, ispartial, nodel, re_pad, ret, s_count, t_ret;
*** 1019,1026 ****
* should have been caught by the checking routine, but
* add a sprinkling of paranoia.
! DB_ASSERT(dbenv, flags == DB_CURRENT || flags == DB_KEYFIRST ||
! flags == DB_KEYLAST || flags == DB_NOOVERWRITE);
* We'll want to use DB_RMW in a few places, but it's only legal
--- 1019,1027 ----
* should have been caught by the checking routine, but
* add a sprinkling of paranoia.
! DB_ASSERT(dbenv, flags == DB_APPEND || flags == DB_CURRENT ||
! flags == DB_KEYFIRST || flags == DB_KEYLAST ||
! flags == DB_NOOVERWRITE);
* We'll want to use DB_RMW in a few places, but it's only legal
*** 1048,1053 ****
--- 1049,1107 ----
goto err;
have_oldrec = 1; /* We've looked for the old record. */
+ } else if (flags == DB_APPEND) {
+ /*
+ * With DB_APPEND, we need to do the insert to populate the
+ * key value. So we swap the 'normal' order of updating
+ * secondary / verifying foreign databases and inserting.
+ *
+ * If there is an append callback, the value stored in
+ * data->data may be replaced and then freed. To avoid
+ * passing a freed pointer back to the user, just operate
+ * on a copy of the data DBT.
+ */
+ tdata = *data;
+ /*
+ * If this cursor is going to be closed immediately, we don't
+ * need to take precautions to clean it up on error.
+ */
+ if (F_ISSET(dbc_arg, DBC_TRANSIENT))
+ dbc_n = dbc_arg;
+ else if ((ret = __dbc_idup(dbc_arg, &dbc_n, 0)) != 0)
+ goto err;
+
+ pgno = PGNO_INVALID;
+
+ /*
+ * Append isn't a normal put operation; call the appropriate
+ * access method's append function.
+ */
+ switch (dbp->type) {
+ case DB_QUEUE:
+ if ((ret = __qam_append(dbc_n, key, &tdata)) != 0)
+ goto err;
+ break;
+ case DB_RECNO:
+ if ((ret = __ram_append(dbc_n, key, &tdata)) != 0)
+ goto err;
+ break;
+ default:
+ /* The interface should prevent this. */
+ DB_ASSERT(dbenv,
+ dbp->type == DB_QUEUE || dbp->type == DB_RECNO);
+
+ ret = __db_ferr(dbenv, "DBC->put", 0);
+ goto err;
+ }
+ /*
+ * The append callback, if one exists, may have allocated
+ * a new tdata.data buffer. If so, free it.
+ */
+ FREE_IF_NEEDED(dbenv, &tdata);
+ pkey.data = key->data;
+ pkey.size = key->size;
+ /* An append cannot be replacing an existing item. */
+ nodel = 1;
} else {
/* Set pkey so we can use &pkey everywhere instead of key. */
pkey.data = key->data;
*** 1400,1405 ****
--- 1454,1465 ----
skip_s_update:
+ * If this is an append operation, the insert was done prior to the
+ * secondary updates, so we are finished.
+ */
+ if (flags == DB_APPEND)
+ goto done;
+ /*
* If we have an off-page duplicates cursor, and the operation applies
* to it, perform the operation. Duplicate the cursor and call the
* underlying function. -
Problems with Steam - Dota2 and ETS2
Hello
I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
Lenovo Y580 - GTX660M
After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 1455 != 1454, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
[0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Using breakpad crash handler
Setting breakpad minidump AppID = 570
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system supports the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
GL_MAX_SAMPLES_EXT: 32
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
Did not detect any valid joysticks.
WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
WARNING: unable to link log_color and log_color because one or more is a ConCommand.
WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
WARNING: unable to link log_level and log_level because one or more is a ConCommand.
WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
Load a scaleform font provider?
Creating D3D9 device with D3DCREATE_MULTITHREADED
IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
GL sampler object usage: DISABLED
##### swap interval = 0 swap limit = 1 #####
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
!! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
Installing breakpad exception handler for appid(steam)/version(1405474565_client)
[0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Setting breakpad minidump AppID = 227300
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
X Error of failed request: GLXUnsupportedPrivateRequest
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 16 (X_GLXVendorPrivate)
Serial number of failed request: 80
Current serial number in output stream: 82
Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
sudo journalctl
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
sudo nano /var/log/Xorg.8.log
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 887.399] X Protocol Version 11, Revision 0
[ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
[ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
[ 887.399] Build Date: 27 June 2014 07:32:26PM
[ 887.399]
[ 887.399] Current version of pixman: 0.32.6
[ 887.399] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
[ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 887.400] (==) ServerLayout "Layout0"
[ 887.400] (==) No screen section available. Using defaults.
[ 887.400] (**) |-->Screen "Default Screen Section" (0)
[ 887.400] (**) | |-->Monitor "<default monitor>"
[ 887.400] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 887.400] (**) | |-->Device "DiscreteNvidia"
[ 887.400] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 887.400] (**) Option "AutoAddDevices" "false"
[ 887.400] (**) Option "AutoAddGPU" "false"
[ 887.400] (**) Not automatically adding devices
[ 887.400] (==) Automatically enabling devices
[ 887.400] (**) Not automatically adding GPU devices
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 887.401] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 887.401] (==) |-->Input Device "<default pointer>"
[ 887.401] (==) |-->Input Device "<default keyboard>"
[ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 887.401] (II) Loader magic: 0x811cc0
[ 887.401] (II) Module ABI versions:
[ 887.401] X.Org ANSI C Emulation: 0.4
[ 887.401] X.Org Video Driver: 15.0
[ 887.401] X.Org XInput driver : 20.0
[ 887.401] X.Org Server Extension : 8.0
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 887.401] setversion 1.4 failed: Permission denied
[ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 887.403] Initializing built-in extension Generic Event Extension
[ 887.404] Initializing built-in extension SHAPE
[ 887.404] Initializing built-in extension MIT-SHM
[ 887.404] Initializing built-in extension XInputExtension
[ 887.404] Initializing built-in extension XTEST
[ 887.404] Initializing built-in extension BIG-REQUESTS
[ 887.404] Initializing built-in extension SYNC
[ 887.404] Initializing built-in extension XKEYBOARD
[ 887.404] Initializing built-in extension XC-MISC
[ 887.404] Initializing built-in extension SECURITY
[ 887.404] Initializing built-in extension XINERAMA
[ 887.404] Initializing built-in extension XFIXES
[ 887.404] Initializing built-in extension RENDER
[ 887.404] Initializing built-in extension RANDR
[ 887.404] Initializing built-in extension COMPOSITE
[ 887.404] Initializing built-in extension DAMAGE
[ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
[ 887.404] Initializing built-in extension DOUBLE-BUFFER
[ 887.404] Initializing built-in extension RECORD
[ 887.404] Initializing built-in extension DPMS
[ 887.404] Initializing built-in extension Present
[ 887.404] Initializing built-in extension DRI3
[ 887.404] Initializing built-in extension X-Resource
[ 887.404] Initializing built-in extension XVideo
[ 887.404] Initializing built-in extension XVideo-MotionCompensation
[ 887.404] Initializing built-in extension XFree86-VidModeExtension
[ 887.404] Initializing built-in extension XFree86-DGA
[ 887.404] Initializing built-in extension XFree86-DRI
[ 887.404] Initializing built-in extension DRI2
[ 887.404] (II) "glx" will be loaded by default.
[ 887.404] (II) LoadModule: "dri2"
[ 887.404] (II) Module "dri2" already built-in
[ 887.404] (II) LoadModule: "glamoregl"
[ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
[ 887.454] compiled for 1.15.0, module version = 0.6.0
[ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.454] (II) LoadModule: "glx"
[ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
[ 887.495] compiled for 4.0.2, module version = 1.0.0
[ 887.495] Module class: X.Org Server Extension
[ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 887.495] Loading extension GLX
[ 887.495] (II) LoadModule: "nvidia"
[ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 887.500] compiled for 4.0.2, module version = 1.0.0
[ 887.500] Module class: X.Org Video Driver
[ 887.500] (II) LoadModule: "mouse"
[ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 887.502] (II) Module mouse: vendor="X.Org Foundation"
[ 887.502] compiled for 1.15.0, module version = 1.9.0
[ 887.502] Module class: X.Org XInput Driver
[ 887.502] ABI class: X.Org XInput driver, version 20.0
[ 887.502] (II) LoadModule: "kbd"
[ 887.502] (WW) Warning, couldn't open module kbd
[ 887.502] (II) UnloadModule: "kbd"
[ 887.502] (II) Unloading kbd
[ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 887.502] (--) using VT number 1
[ 887.502] (II) Loading sub module "fb"
[ 887.502] (II) LoadModule: "fb"
[ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 887.504] (II) Module fb: vendor="X.Org Foundation"
[ 887.504] compiled for 1.15.2, module version = 1.0.0
[ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 887.504] (II) Loading sub module "wfb"
[ 887.504] (II) LoadModule: "wfb"
[ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 887.506] (II) Module wfb: vendor="X.Org Foundation"
[ 887.506] compiled for 1.15.2, module version = 1.0.0
[ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.506] (II) Loading sub module "ramdac"
[ 887.506] (II) LoadModule: "ramdac"
[ 887.506] (II) Module "ramdac" already built-in
[ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 887.506] (==) NVIDIA(0): RGB weight 888
[ 887.506] (==) NVIDIA(0): Default visual is TrueColor
[ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
[ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
[ 887.507] (**) NVIDIA(0): Ignoring EDIDs
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 887.507] (**) NVIDIA(0): mode
[ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
[ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
[ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
[ 891.008] (--) NVIDIA(0): none
[ 891.008] (II) NVIDIA(0): Validated MetaModes:
[ 891.008] (II) NVIDIA(0): "NULL"
[ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 891.008] (--) Depth 24 pixmap format is 32 bpp
[ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 891.008] (II) NVIDIA: access.
[ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 891.013] (II) NVIDIA(0): Config Options in the README.
[ 891.013] (II) NVIDIA(0): Setting mode "NULL"
[ 891.028] Loading extension NV-GLX
[ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 891.035] (==) NVIDIA(0): Backing store enabled
[ 891.035] (==) NVIDIA(0): Silken mouse enabled
[ 891.035] (==) NVIDIA(0): DPMS enabled
[ 891.035] Loading extension NV-CONTROL
[ 891.036] (II) Loading sub module "dri2"
[ 891.036] (II) LoadModule: "dri2"
[ 891.036] (II) Module "dri2" already built-in
[ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
[ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 891.036] (--) RandR disabled
[ 891.044] (II) Initializing extension GLX
[ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
[ 891.100] (**) Option "CorePointer" "on"
[ 891.100] (**) <default pointer>: always reports core events
[ 891.100] (WW) <default pointer>: No Device specified, looking for one...
[ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
[ 891.146] (==) <default pointer>: Protocol: "Auto"
[ 891.146] (**) <default pointer>: always reports core events
[ 891.146] (**) Option "Device" "/dev/input/mice"
[ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 891.200] (**) <default pointer>: Buttons: 9
[ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 891.200] (**) <default pointer>: (accel) acceleration profile 0
[ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
[ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 891.493] (II) LoadModule: "kbd"
[ 891.494] (WW) Warning, couldn't open module kbd
[ 891.494] (II) UnloadModule: "kbd"
[ 891.494] (II) Unloading kbd
[ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 891.494] (EE) No input driver matching `kbd'
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 891.499] setversion 1.4 failed: Permission denied
[ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[ 891.499] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 892.695] (II) UnloadModule: "mouse"
[ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 892.723] (EE) Server terminated successfully (0). Closing log file.
Last edited by Akikyo (2014-07-24 21:04:45)I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs. -
Minor Problem with MagSafe Power Adapter
I got my MBP almost a year ago now (partially why I'm asking the question) and I've noticed that my power adapter doesn't always show the charge light. Sometimes it is not on at all, and sometimes it is less bright in color (both green and amber).
If I remove it and put it back it usually corrects itself.
It if fully functional; even if the light is completely out and plugged in it still shows as charging.
So, is this normal? I never remember having this sort of problem with my PB G4.I would think the led light on my adapter cable was broken, but I discovered it works fine on a co-workers MBP. His adapter, which we know works, does NOT work (ie. the led does not come on) when attached to my computer. This indicate to me that the problem, whatever it is, can sometimes be with the computer and not the adapter.
I would be curious if others with apparently dead leds have tried their chargers on other MBPs.
Here's the long version of my story:
My 5W MagSafe completely fried after only 9 months.
The new adapter was fine for several days until this morning.
My "low battery" warning popped up, so so I plugged it in to recharge and immediately noticed the little led on the charger cord did not come on.
I found it hard to believe that I had another bad adapter, so before making the trip back to the store, I went into the studio where there are some other MBP users.
I plugged my adapter into another laptop and the led came on. It appeared to function completely normally. I tried MagSafe adapters from two other MBPs, but the led did not come on on either of them while attached to my computer.
This made me think there was some sort of problem with the connector on the computer itself. Just visually, it appears to be clean and corrosion free.
The next obvious step, it seemed, would have been to try swapping batteries with the other laptops, but mine is a 17" and everyone else here has 15"... and so we have different battery sizes.
One of the people here at the studio had a little utility called "Coconut Battery", that reports information about the battery health. When I ran it on my laptop, I got what I thought were rather surprising results.
It showed the usual things like current charge (21%), battery capacity and so on. But under "Additional Info" it said "Charger connected: Yes" and "Battery is charging: No".
I figured this narrowed it down to a problem with the battery. But as I was showing these results to my co-worker, the "Current Battery Charge" changed from 21 to 22%. Huh? We left it plugged in and it continued to show a steady climb in the charge, as if it is working normally. Except there is no led light, and the software still says it is not charging. Odd.
I then noticed that the built-in battery level indicator on the status bar was also showing the same increases. The led lights on the back of the battery are indicating an increase as well.
Just out of curiosity, I ran a second battery health analyzer program and again got these conflicting results. This one reported the same battery charge and capacity and so on as the previous one. It also recognized that the laptop was running off of AC power, that there was a battery, but it said "Not Chargeable."
So now I am going to let it continue until I have a full charge and then see if the computer will run as usual from the battery.
I don't think the store here is going to give me another adapter since this one appears to work just fine on the other computers.
Any thoughts on why the led would work on other laptops but not mine?
Why the battery health monitors report that the battery is being charged, but also that it is "not chargeable"? -
Problem with out of memory and reservation of memory
Hi,
we are running a very simple java program on HP-UX that do some text substitution - replacing special characters with other characters.
The files that are converted are sometimes very large, and now we have come to a point where the java server doing the work crashes with "Out of memory" message. (no stack) when it process one single 500MB large file.
I have encountered this error before(with smaller files) and then I have made the maximum Heap larger, but now when I try to set it to 4000M
i get the message:
"Error occurred during initialization of VM
Could not reserve enough space for old generation heap"
When it crash with this message, my settings are:
-XX:NewSize=500m -XX:MaxNewSize=1000m -XX:SurvivorRatio=
8 -Xms1000m -Xmx4000m
If I run with Xmx3000m instead the java program starts but I get Out of memory error like:
java.lang.OutOfMemoryError
<<no stack trace available>>
The GC log file created when it crashes looks like:
<GC: -1 31.547669 1 218103808 32 219735744 0 419430400 0 945040 52428800 0 109051904 524288000 877008 877008 1048576 0.934021
>
<GC: -1 62.579563 2 436207616 32 218103808 0 419430400 945040 944592 52428800 109051904 327155712 524288000 877008 877008 1048
576 2.517598 >
<GC: 1 65.097909 1 436207616 32 0 0 419430400 944592 0 52428800 327155712 219048400 524288000 877008 877008 1048576 2.061976 >
<GC: 1 67.160178 2 436207616 32 0 0 419430400 0 0 52428800 219048400 219048400 524288000 877008 877008 1048576 0.041408 >
<GC: -1 128.133097 3 872415232 32 0 0 419430400 0 0 52428800 655256016 655256016 960495616 877008 877008 1048576 0.029950 >
<GC: 1 128.163584 3 872415232 32 0 0 419430400 0 0 52428800 655256016 437152208 960495616 877008 877008 1048576 3.971305 >
<GC: 1 132.135106 4 872415232 32 0 0 419430400 0 0 52428800 437152208 437152208 960495616 877008 876656 1048576 0.064635 >
<GC: -1 256.378152 4 1744830464 32 0 0 419430400 0 0 52428800 1309567440 1309567440 1832910848 876656 876656 1048576 0.058970
>
<GC: 1 256.437652 5 1744830464 32 0 0 733282304 0 0 91619328 1309567440 873359824 1832910848 876656 876656 1048576 8.255321 >
<GC: 1 264.693275 6 1744830464 32 0 0 733282304 0 0 91619328 873359824 873359824 1832910848 876656 876656 1048576 0.103764 >
We are running:
java version "1.3.1.02"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1.02-011206-02:17)
Java HotSpot(TM) Server VM (build 1.3.1 1.3.1.02-JPSE_1.3.1.02_20011206 PA2.0, mixed mode)
We have 132GB of physical memory and a lot of not used Swap space, so I cant imagine we have a problem with that.
Can anyone please suggest what to do proceed troubleshooting or to change some settings? I'm not into this Java really so I really need some help.
Usually the java program handles thousands of smaller files (around 500 KB - 1 MB sized files).
Thanks!You have a one to one mapping? Where one character is replaced with another?
And all you do is read the file, replace and then write?
Then there is no reason to have the entire file in memory.
Other than that you need to determine if the VM (which is not a Sun VM) has an upper memory bound. That would be the limit that the VM will not go beyond regardless of memory in the system.
We have 132GB of physical memory and a lot of not used Swap spaceOne would wonder why you have swap space at all. -
Problem with NIC and Firewire on MSI 865PE NEO2-PFISR
Hi, I have lots of trouble getting the network adapter on the MSI 865PE NEO2-PFISR to work.
The NIC's LED indicators doesnt even light up when I plug in a network cable,
and in windows (win 2003 server) it doesnt find the adapter at all.
The NIC is displayed in the bios, and I have the option to disable it,
but it is enabled.
I have even reinstalled windows 2003 server to try to get the NIC to work.
I have upgraded the bios to v3.8 via live update, with no problems, although the
firewire-option on the same page in the bios is still gone, it doesnt detect the
firewire at all(!).
I have also tried several other NIC's (a 3COM 3C905B TX and a 3C905B TX XL
PCI adapter). The 3C905B TX worked fine for a while, and then it started saying in
windows that a network cable was unplugged, and began to try 10mbit, 100mbit
lots of retries, now it doesnt work at all.
I swapped tp-cables and changed the ports on the network switch (which there is
also other computers attached to which doesnt have any problems) and that didnt
made any difference.
It seems that the whole pci bus is long gone, and maybe the onboard NIC is
attached to this same pci bus?
Strange also about the firewire-controller which isnt detected anymore.
The USB devices work, and even a 3com usb wlan adapter works well.
I have tried to reset the bios several times without that making a difference.
Anybody have a clue to point out here?
Cheers!Quote
Originally posted by Raven
you could try and flash to an older bios
I tried most anything on flashing bios, both to a lower and a higher version.
I returned the motherboard to the reseller and got a new motherboard as a replacement. This doesnt have all the same problems. At first it didnt post at all, indicating to red lights on the diagnosis.
Then I was so pissed I hadnt touched the computer in a week, and just tried to use it a few days ago, and it seemed to work all ok. I used it for a few hours, and then it locked up.
When I powered it up again, the lights on the integrated adapter was out. At first it seemed to work to take the agp card a little out of its slot, as if it was unaligned or something. Used it for a few more hours.
Then I plugged in the sound cables (5.1 sound with 3 cables), and with the last cable, the network darkened out AGAIN!!
In the bios it still indicates that the network is enabled, firewire is enabled etc.
I twisted the network cable, and for a few microseconds I get a orange light, not the usual green light. Now this has stopped too.
I see other also have problems with these symptoms so I guess I've got another black monday card.
I will return this card too, and ask the reseller to get a card of another brand. -
Problem with keyboard and mouse pm8m-v
I have gotten this pm8m-v from a freind who knew nothing about computers. He had problems with the keyboard and mouse not responding at start up or just freeze on him. So I check it out, called MSI and even sent it to them, they claimed that there was nothing wrong with the board. So here are the specs of the computer now:
pm8m-v motherboard
2-256MB memory PC-2700 DDR 333Mhz
intel P4 2.6GHz
codegen power supply 300W
gateway CDW
western digital 40 harddrive
the rest is on board stuff
the problem is still there and it is driving me crazy, can you please help?I had the same problem with the PM8M-V, today as a matter of fact, and I kept getting locked up at the point where I had to hit enter to load the WinXP CD to setup the system. After finding this topic I tried a different keyboard. The one that was being used was a Kennsiington PS2 cheapo, I swapped it for a Microsoft (one of those ergonomic styles and I've had it for a long time) Keyboard PS2, and the problem went away. I'm typing on the Kennsington right now, so it's fine just wasn't liked by the PM8M-V for some reason.
-
Hotspot appear always to search and never stop
internet is not working without internet APN data
Tethering APN never save the data
Vodafone carrier checked and mentioned that the no problem with the SIM
Tradeline checked and the IOS was latest 6.1, but asked to reinstall from scratch
Please adviceI have this _same_ issue, exactly. Initial backup goes just fine, but incremental backups fail. And like you, I replaced the internal drive.
The failures didn't start occuring long after the original drive was replaced--which was about 1 year ago. The new drive was non-Apple and worked fine--and tests fine now as well when outside the TC. But suddenly incremental backups started failing when the TC firmware and utility app were updated about 2-3 months ago. I even swapped the internal non-Apple drive for another known-working non-Apple drive, and same results.
I strongly suspect Apple added something to the firmware to check if it's an Apple or non-Apple drive in the TC and, if the latter, maybe causes incremental backups to fail. This is only speculation and, obviously, the initial backup still works, so any checksum like this would have to be only during the incremental backup process.
I'll be checking into this thred to see if others have the same issue, or if a solution is found. Hopefully my hypothesis is just para-apple-noia and it's some small, easy-to-fix issue.
-Gizm0d0
Maybe you are looking for
-
[solved] Arch linux access point with multiple interfaces for the NAT
Hi, I have a router running Arch linux. It is connected via LAN (let's call it eth0) to the internet. It has a second LAN interface, eth1, and a wireless interface in master mode, wlan0. Now, Everything works perfectly except providing network connec
-
As of 2 months ago, I cannot fully access Facebook using either Safari or Firefox browsers. I have a Mac G5 running OSX 10.5.8, Safari 5.0.6 and Firefox 3.6.28. Does anyone have any suggestions on how I can resolve this?
-
Blank Screen after 703HP3 (Linux)
Hi, after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to HP703HP3 I got a blank screen after starting the machine. All logs look got but I can't login in. Only a blank web page. No login. No picture. Nothing. Any idea? Have anybo
-
I have 4 internal HDD and an External. No matter where I assign Media Cache Files or Media Cache Database Premiere crashes within 100-300 frames in a Nested sequence. I am trying to move the caches around, deleting them, restarting a fresh nested seq
-
ICal issue with entering email addresses for invitees
Hi all, I am using 10.6.2 and I've got a very annoying issue with iCal (started on 10.5 still, and survived an upgrade to 10.6 and even a fresh reinstall, although I did restore from TM). Anyway, what happens is that when I am entering email addresse