Control Buttons in message popup with Digital I/O

In my Test system the operator can use only the Start Stop Quit buttons on the Panel.
He aint have any mouse
That means I have to provide him wit all the control power thr' these 3 digital I/Ps
There are many message popups in the SequentialModel.seq file
The OPERATOR will respond to them with the 3 H/W buttons.
OK= Green
Terminate = Red
how can I assign my Buttons to all Popup messages on teststand Irrespective of their .(i.e handling them Individually)

My plan is to control the whole testsystem, with Hardware buttons (On off S/Ws for Operator) (operator wont be using mouse- it takes timeto scroll & prod is slow).
The H/W buttons r read thr Labview. The file is a member function of the class that I call In teststand seq.
I am trying to read and respond to Teststand dialogues thr' the Operator Interface using these 3 buttons

Similar Messages

Message popup with picture in CVI 7.1.1

I'm trying to figure out how to create a message popup that also has a picture in it. I'm using TS 3.1 as my sequence editor, and this version doesn't provide this feature (I know 4.0 and later do). Has anyone done this?

As Sean said, the easiest way is to create your own panel and use it as a popup. The new panel can be in the same UIR file as the parent panel. You can also display the new panel as a modal popup using the the LoadPanel InstallPopup function. Don't forget to create a callback for the panel (or a control on the panel) that handles the close event. You will want to call RemovePopup or DiscardPanel to close the popup.
National Instruments
Product Support Engineer

Satellite A300-1JH PSAGLE: Control buttons don't work with XP

Hello there.
I own a Toshiba Satellite A300 psagle.
It works beautifully, but there is a problem: the tactile music buttons don't work.
I am using Windows XP and I have installed all the drivers available.
Could some one please tell me what I should do.
P.s. how can I activate the "face recognition" option?
Please reply.
Regards.

Hi
Regarding the Toshiba Control Media buttons;
You have to install the Toshiba Controls from the Toshiba European driver page.
Check there the Satellite A300 PSAG8E series and download the Toshiba Controls
Regarding the face reorganization:
Check these threads:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127846&#127846
http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=131453
Bye

Message popup timeout reached or button pressed?

I have a Message Popup with one button. This button is also set up to be the Timeout Button. If I press the button, RunState.Sequence….Result.ButtonHit is set to 1. Alternately, if I allow the timeout to be reached, Result.ButtonHit is also set to 1. Is there a way to determine whether the timeout was reached or if the user pressed the button?

Hi Christine,
I have just played with Message Popup's timeout and i also do not see a way to check if a timeout has been occured.
The only way is to use a new button for timeout but you can not hide it ! Only changing the colour stuff and this is looking
terrible. And if the user is pressing this button you will not determine a timeout, too!
I think the "blue ones" should add this feature in next TS release.
Or they have some other suggestions.
Sorry that i have no solution.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Message Popup sizing TS 4.0

Hi,
Since moving to TestStand 4.0 from 3.0 we've noticed that a message popup with the buttons arranged to the right or left and with no message text has a big blank space where the message text would go if it were to be entered. For this particular project we use the text on the button to define the message. Any thoughts / sneaky tips on how to lose this unwanted whitespace?
Mike
Attachments:
message popup.JPG ‏16 KB

Hi Mike,
i see the problem and was able to reproduce it. Unfortunately i don't see a property for the Message Popup Step to define the space of the blank area.
One possible solution is to create your own Message Popup in LabVIEW or CVI and and use the output to decide which button was hit... I know that is a little bit more of work but it would solve your problem.
thanks,
cheggers
Sascha E.
Group Leader Applications Engineering
National Instruments Switzerland

Trouble getting banner rotator control buttons to line up. Please help!

Hi guys,
I had some help making a banner rotator and it all works fine but I can't get the control buttons to line up with each other properly.
You can check my example by clicking here.
Basically the left and right control arrows should align with the lights. Does anyone know how I can get them to line up?
Thank you,
S

Spindrift wrote:
I tried what you said and it kind of worked but I more want to bring the <ul> up to the level of the arrows, rather than giving the arrows a top margin to bring them down, if that makes sense. I want the black box to be a thin strip.
Any other ideas?
Add margin: 0; to your 'banner-rotation ul' css selector (as shown below)
.banner-rotation ul {
    float: left;
    padding: 1px 0 0;
    width: 148px;
height:11px;
margin: 0;

PresaveAction() Popup message box with save and cancel button

Hi,
I want to give user an option from popup box with the message "Are you sure to Save you record".
I got below javascript code but don't know how to show two buttons on popup if user wants to recheck before final saving then he should click CANCEL otherwise SAVE button.
<script type="text/javascript">
function PreSaveAction()
alert("Your request has been submitted");
return true;
</script>
Please advise in above code.

Hi,
For your requirement, you can use the JavaScript Confirm Box which will contains two buttons in a popup window.
Here is a demo about checking the value in the “Title” field, if it equals “asdf”, then a Confirm box will come out, then user will be able to choose whether to save or not.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script type="text/javascript">
var $j = jQuery.noConflict();
function PreSaveAction()
var txtStatus = $j(":input[title='Title']").val();
if(txtStatus == "asdf")
alert("Invalid Input");
var r=confirm("Are you sure to Save you record?");
if (r==false)
var statusfocus = $j(":input[title='Title']");
statusfocus .focus();
return false;
else
return true;
</script>
Feel free to reply if there still any questions about this.
Best regards
Patrick Liang
TechNet Community Support

How to create a popup with a messages in solaris 8?

I want to create a simple popup with a OK button when my users logon to the CDE environment informing them about some important stuff.
How can I do this the easiest way?
/C

If your messages are short enough, you can use the existing /usr/dt/bin/dterror.ds script to display the message you want:
/usr/dt/bin/dterror.ds "Message" "Title Bar" "OK Button Text"
If you need more than that, you could adapt that script to your needs. Here's the dtksh reference:
http://docs.sun.com/app/docs/doc/806-2912

Process message characteristic with more then ( ) 30 digits in PI-sheet

Dear all,
I am looking for a solution to populate a process message characteristic with more then 30 digits in the PI
sheet and not during control recipe generation.
I have defined a customer characteristic (with O27C) in the `Additional data for Process Instructions
and Messages` with a length of 40 Characters. Next to that in my process message i added a function
to retrieve the material master text (40 digits) and to put it into the customer characteristic as an output.
However in this set-up I get an sytax error that blocks the generation of the control recipe. The syntax
erro is due to the fact that the long text characteristic should have a value. Obviously it does not,
because I want to retrieve it from the material description. Note that the material number I use to retrieve
the text, is selected in the PI sheet itself an is unknown (unplanned Issue) at generation.
Please advise.
Cheers, Leo
Edited by: L. de Pee on Oct 6, 2009 3:08 PM

Hi.
Its BPM Standard cubeCube , 0BPM_C01 and we are populating 0fiscyear based on Instance-Id.
I have reloaded the cube and maintained Index, checked DB Stat, Roll up , compression all are done, but still facing the same issues.
Please provide me your inputs if you faced the similar issue.
Thanks in Advance.
Br
Alok

How do I prevent reporting Button Index line of Message Popup Result in TestStand report??

My Message Popup is reported as:
Verify that the Installed memory (RAM) is 1.96 GB: Passed
Button Index: 1
What is the best way to prevent reporting the Button Index line?

For your step in the sequence open Step.Result in Variables pane, right click on ButtonHit, select Advanced>Edit Flags and uncheck "Include in Report" property. It is checked by default for custom step types created as combined types with the Message Popup general type.
That should be done for all instances of these step. When I tried just to incheck the "Include in Report" property in my step type, somehow it is still checked for all newly created steps of this step type. Possible solutions (besides changing them all manually as I described above) are to modify them at drop time from OnNewStep custom substep or to create automated script and run it on your sequences after creation to modify the flag.
Let me know if you need help with these solutions.
Sergey Kolbunov
CLA, CTD

Popup with four buttons

Hi, I'm a newbie in ABAP and I want to create a popup with only four buttons (with my options), like a questionnaire, but without cancel button.
I see the function C102_POPUP_TO_CONFIRM, I want something similar but without cancel button.
can someone help me?
Thanks!!

Only a little doubt more
Why SPACE string don't work in this situation:
CALL FUNCTION 'C102_POPUP_TO_CONFIRM'
    EXPORTING
     titlebar                    = 'title'
      text_question               = 'question'
     text_button_1               = 'text1'
ICON_BUTTON_1               = ' '
I_ICON1_INFO                = ' '
     text_button_2               = 'text2'
ICON_BUTTON_2               = ' '
I_ICON2_INFO                = ' '
     text_button_3               = 'text3'
ICON_BUTTON_3               = ' '
I_ICON3_INFO                = ' '
     text_button_4               = 'text4'
ICON_BUTTON_4               = ' '
I_ICON4_INFO                = ' '
DEFAULT_BUTTON              = '1'
   DISPLAY_CANCEL_BUTTON       = SPACE
START_COLUMN                = 25
START_ROW                   = 6
IMPORTING
     answer                      = answer1.
Thanks for all!!

Popup with text area & ok/cancel button

Hi all,
My requirement is to display a popup with a text area in editable mode along with 'Confirm' and 'Cancel' button. If the user changes the text, and presses the 'CONFIRM' the text is to be saved in DB.
How do i implement this? Should i use a FM or modal dialog box?

You can use simple modal dialog box ..
using below syntax :
CALL SCREEN 1100 STARTING AT 1 1.
Select modal dialog box ( Screen type).
Thanks
Seshu

Reg: Parameterized Popup with Button

Hi team,
I have a reuiqrement as below :
Table Region : Header Data For each header i have a link to PopUP.
In the PopUP user will enter all the line information.
To save the line information i have use normal button bean and i was able to save data.
When i close the popUP window, i get a message saying : "Data Entered will be lost, do you still want to close"-->it is a browser warning message.
How to get rid off the above warning.
Please suggest.
Regards
Sridhar

Can you use a submit button instead? Popup will be automatically closed once you hit the submit button.
Thanks
Shree

Sort up and sort Down push buttons in module pool with table control wizard

hi,
i have created 2 buttons for Sort up and sort Down push buttons in module pool with table control wizard
please any one can help me.
regards

Hi
Following code is to enable and disable the tbl control using two buttons. Just alter the code and for each button write the sort code.
REPORT YJAN27_SCREEN                                               .
TABLES: SFLIGHT, YFLIGHT_28.
TYPES: BEGIN OF struct1,
      carrid like sflight-carrid,
      connid like sflight-connid,
      fldate like sflight-fldate,
       END OF struct1.
CONTROLS TBL1 TYPE TABLEVIEW USING SCREEN 2700.
DATA: OK_CODE LIKE SY-UCOMM,
      CARRID LIKE SFLIGHT-CARRID,                                    "cols in tbl ctrl
      CONNID LIKE SFLIGHT-CONNID,
      FLDATE LIKE SFLIGHT-FLDATE,
      itab TYPE TABLE OF STRUCT1 WITH HEADER LINE,
      cols like line of TBL1-COLS,
      FLAG TYPE I.
FLAG = 1.
CALL SCREEN 2700.
*&      Module STATUS_2700 OUTPUT
*       text
MODULE STATUS_2700 OUTPUT.
SET PF-STATUS 'BACK'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_2700 OUTPUT
*&      Module USER_COMMAND_2700 INPUT
*       text
MODULE USER_COMMAND_2700 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'BACK'.
    LEAVE PROGRAM.
WHEN 'DIS'.                                                         "write code for sort up
    loop AT TBL1-COLS INTO COLS.
       COLS-SCREEN-INPUT = 0.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 2.
WHEN 'ENA'.                                                       "write code for sort down
    loop AT TBL1-COLS INTO COLS.
        COLS-SCREEN-INPUT = 1.
        MODIFY TBL1-COLS FROM COLS.
    ENDLOOP.
    FLAG = 1.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_2700 INPUT
*&      Module GET_DATA OUTPUT
*       text
MODULE GET_DATA OUTPUT.
select carrid connid fldate from SFLIGHT into table itab.
ENDMODULE.                 " GET_DATA OUTPUT
*&      Module POPULATE_TBL OUTPUT
*       text
MODULE POPULATE_TBL OUTPUT.
    MOVE-CORRESPONDING ITAB TO SFLIGHT.
ENDMODULE.                 " POPULATE_TBL OUTPUT
*&      Module CHANGE_SCREEN OUTPUT
*       text
MODULE CHANGE_SCREEN OUTPUT.    " use this module if you want to hide the other button
CASE FLAG.
WHEN 1.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 1.
         MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
WHEN 2.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_DIS'.
        SCREEN-INVISIBLE = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    LOOP AT SCREEN.
      IF SCREEN-NAME = 'B_ENA'.
        SCREEN-INVISIBLE = 0.
         MODIFY SCREEN.
      ENDIF.
   ENDLOOP.
ENDCASE.
ENDMODULE.                 " CHANGE_SCREEN OUTPUT
PROCESS BEFORE OUTPUT.
MODULE STATUS_2700.
MODULE CHANGE_SCREEN.     " use this if you want to display one button at a time
MODULE GET_DATA.
loop at itab WITH control TBL1.
    MODULE POPULATE_TBL.       " populate tbl ctrl
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_2700.    " do the sort operations
loop at itab.
endloop.
Hope this helps
Regards,
Jayanthi.K

Message control buttons in Japaneese

My galaxy s5 messaging buttons are in Japaneese. I can sent messages in english but all the control buttons - such as the send button - are all in japaneese. it is driving me crazy.....anyone have any ideas. I have looked at my setting and all of them seem to have english as the default language.

thacky710,
Oh my! I'm sorry to hear that. I know it's important to have the correct language for your phone and this is certainly odd. Let's go to Settings>Language & Input>Language should be set to English. Then, scroll to the keyboard sectiona and tap on the gear icon. In each one, switch the "Input Language" to English and delete any other options you see there.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Control Buttons in message popup with Digital I/O

Similar Messages

Maybe you are looking for