Message popup with picture in CVI 7.1.1

I'm trying to figure out how to create a message popup that also has a picture in it. I'm using TS 3.1 as my sequence editor, and this version doesn't provide this feature (I know 4.0 and later do). Has anyone done this?

As Sean said, the easiest way is to create your own panel and use it as a popup. The new panel can be in the same UIR file as the parent panel. You can also display the new panel as a modal popup using the the LoadPanel InstallPopup function. Don't forget to create a callback for the panel (or a control on the panel) that handles the close event. You will want to call RemovePopup or DiscardPanel to close the popup.
National Instruments
Product Support Engineer

Similar Messages

Control Buttons in message popup with Digital I/O

In my Test system the   operator can use only the Start Stop Quit buttons on the Panel.
He aint have any mouse
That means I have to provide him wit all the control power thr' these 3 digital I/Ps
There are many message popups in the SequentialModel.seq file
The OPERATOR will respond to them with the 3 H/W buttons.
OK= Green
Terminate = Red
how can I assign my Buttons to all Popup messages on teststand Irrespective of their .(i.e handling them Individually)

My plan is to control the whole testsystem, with Hardware buttons (On off S/Ws for Operator) (operator wont be using mouse- it takes timeto scroll & prod is slow).
The H/W buttons r read thr   Labview. The file is a member function of the class that I call In teststand seq.
I am trying to  read and respond to Teststand dialogues thr' the Operator Interface using these 3   buttons

Message Popup sizing TS 4.0

Hi,
Since moving to TestStand 4.0 from 3.0 we've noticed that a message popup with the buttons arranged to the right or left and with no message text has a big blank space where the message text would go if it were to be entered. For this particular project we use the text on the button to define the message. Any thoughts / sneaky tips on how to lose this unwanted whitespace?
Mike
Attachments:
message popup.JPG ‏16 KB

Hi Mike,
i see the problem and was able to reproduce it. Unfortunately i don't see a property for the Message Popup Step to define the space of the blank area.
One possible solution is to create your own Message Popup in LabVIEW or CVI and and use the output to decide which button was hit... I know that is a little bit more of work but it would solve your problem.
thanks,
cheggers
Sascha E.
Group Leader Applications Engineering
National Instruments Switzerland

Message popup not appearing

I created a dll that had a message popup (userint.h) using Cvi version 6 on Windows XP, then using the Cvi runtime module and everything was good. I am now using Windows 7 (32 bit) and the latest Cvi runtime module and the dll partly works, does not give any errors, but the message popup does not appear.
My guess is the new Cvi runtime module maybe does not support the older message popup, but really dont know, could be the Windows version; anyone know about this?

Hi,
I don't believe MessagePopup has changed since CVI 3.0 as stated here: http://zone.ni.com/reference/en-XX/help/370051V-01/cvi/uiref/cvimessagepopup/
I would recommend stripping it down to the barebones and see if you can get it functioning that way.

Message popup timeout reached or button pressed?

I have a Message Popup with one button. This button is also set up to be the Timeout Button. If I press the button, RunState.Sequence….Result.ButtonHit is set to 1. Alternately, if I allow the timeout to be reached, Result.ButtonHit is also set to 1. Is there a way to determine whether the timeout was reached or if the user pressed the button?

Hi Christine,
I have just played with Message Popup's timeout and i also do not see a way to check if a timeout has been occured.
The only way is to use a new button for timeout but you can not hide it ! Only changing the colour stuff and this is looking
terrible. And if the user is pressing this button you will not determine a timeout, too!
I think the "blue ones" should add this feature in next TS release.
Or they have some other suggestions.
Sorry that i have no solution.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

How to create a popup with a messages in solaris 8?

I want to create a simple popup with a OK button when my users logon to the CDE environment informing them about some important stuff.
How can I do this the easiest way?
/C

If your messages are short enough, you can use the existing /usr/dt/bin/dterror.ds script to display the message you want:
/usr/dt/bin/dterror.ds "Message" "Title Bar" "OK Button Text"
If you need more than that, you could adapt that script to your needs. Here's the dtksh reference:
http://docs.sun.com/app/docs/doc/806-2912

I bought an unlocked iphone 4s and it is not sending messages or emails with pictures taken with it. What do I have to do?

How do I send messages and emails with pictures attached from my iphone 4 s?

Contact your Carrier and check you MMS enabled on your Plan.

IPhone 4S 5.0.1, messages with pictures crash message app 50% of time and doesn't send or save, any ideas?about 50% of time, iPhone 4S 5.0.1, messages with pictures crash message app 50% of time and doesn't send or save, any ideas?

My iPhone 4S 5.0.1, messages with pictures crash message app 50% of time and doesn't send or save the message. It usually works after a full reboot, any ideas how to fix?

My iPhone 4S 5.0.1, messages with pictures crash message app 50% of time and doesn't send or save the message. It usually works after a full reboot, any ideas how to fix?

How do you forward a text message with pictures to another mobile user

How do you forward a text message with pictures to another mobile device?

Howdy Greg,
It sounds like you have some texts with images attached you would like to forward to another device. If the it can receive text messages, use these steps:
Send messages with your iPhone, iPad, or iPod touch
How do I forward a message?
To forward a message, tap and hold the message bubble, then tap More.
Tap to select the message you want to forward, then tap and select the person to send it to.
If the receiving device does not have the ability to receive text messages, you can also email them to an account setup on it by first saving the message to your phone:
How do I save a photo from a message?
Tap the photo, then tap .
Then emailing it to an account setup on the device from the Photos app:
Other ways to share photos and videos - iPhone
Save or share a photo or video you receive.
Email: Tap to download it if necessary, then touch and hold the item to see sharing and other options.
Thank you for using Apple Support Communities.
Regards,
Sterling

Anyone notice iMessanger and regular messages disappearing? Ihad several iMessages with pictures There is about a 2-3 week section of messages missing. I also see the same things with my phone regular messages.i have iPhone 5s with IOS 7

anyone notice iMessanger and regular phone messages disappearing? Ihad several iMessages with pictures There is about a 2-3 week section of messages missing. I also see the same things with my phone regular messages.i have iPhone 5s w/32 GB RAM and also ipad 4th generation 64GB memory. I have not updated either device with IOS 8 - they are both on IOS 7

anyone notice iMessanger and regular phone messages disappearing? Ihad several iMessages with pictures There is about a 2-3 week section of messages missing. I also see the same things with my phone regular messages.i have iPhone 5s w/32 GB RAM and also ipad 4th generation 64GB memory. I have not updated either device with IOS 8 - they are both on IOS 7

A message tells me that my hard drive is overloaded with pictures. How do I get rid of them?

A message tells me that my hard drive is overloaded with pictures. How do I get rid of them?

That is on your iPad??

Deal with teststand message popup

when I add a message popup in my sequence,I need two button: Ok(button1) and Cancel(Button2).and set timeout.
My question is like this; I need get the status when execute,if uesr click ok,the sequence should go to next step,the other stauts,the sequence should abort executing.
example:
Message Popup
if(RunState.Sequence.Main["Message Popup"].Button1Label=="OK")
call sequence //this action need execute when click "OK"
else
break //this is a action ,without any connection of message popup
end
but no matter what button I click ,the sequence always execute break,that's means the if condition can't get the status of message,where is my error.
any one help me ,thanks very much

duplicate post see the following link
http://forums.ni.com/ni/board/message?board.id=330&message.id=21602&jump=true
Regards
Ray Farmer

Message popup timeout - time left

Can we get from the sequence context the time left (or time elapsed) of a timeout enabled message popup.
For example,
If the message popup is set to timeout after 120 sec and the operator responded when there are 50sec left for the step to timeout,
does any built-in variable have the value 50 (seconds left) or 70 (seconds elapsed)?
I know there are workarounds like calling Seconds() function in pre- and post-expressions and taking the difference but I wonder if it is already implemented or not.
Thanks.
S. Eren BALCI
www.aselsan.com.tr

This information is not stored in the step properties. It is possible to change the step type to get this information. The source code for MessagePopup is included with TestStand at <TestStand>/Components/NI/StepTypes/MsgBox/ if you have Labwindows/CVI.
Your suggestion of using Seconds() is much easier to implement and be accurate enough for your use cases.
Allen P.
NI

Can't edit the Message Popup in TestStand 3.5

I'm using TestStand 3.5/Labview 8, and when I inserted a Message Popup in my sequence, I found that I'm unable to edit it.
I started with a new sequence file, right click->Insert Step->Message Popup, then right clicked the message popup and select Edit Message Settings. I then get the following error (see err1.jpg attachment for actual error popup):
     SeqEdit.exe
     Error in call to LoadPanelEx.
     Parent Panel Handle: 1
     UIR File Name: editmsg.uir
     Panel Resource ID: 1
     hInstance: 0x597F0000, D:\...\TestStand 3.5\Components\NI\StepTypes\MsgBox\msgbox.dll
     Error Code: -143
     ActiveX control error
Then when I click OK in that error I get another error (see err2.jpg attachment for actual error popup):
Sequence Editor
Program Error.
Error Code: -17001
I verified that the msgbox.dll file exists, and from reading some posts on the forum thought it wasn't properly registered. When I tried to register it using regsvr32 I got the following message: "msgbox.dll was loaded, but the DllRegisterServer entry point was not found. This file can not be registered." See err3.jpg attachement for actual error popup.
Any ideas what is going on here and what I need to do to correct it?
Thanks,
-Bill
Attachments:
err3.JPG ‏15 KB
err1.JPG ‏20 KB
err2.JPG ‏11 KB

Unfortunately that didn't work. I went to Start->Programs->National Instruments->TestStand 3.5->Operator Interfaces->LabWindows-CVI and got the following error message:
Test Executive
Error in call to LoadPanelEx
   Parent Panel Handle: 0
   UIR File Name: TestExec.uir
   Panel Resource ID: 4
   Hinstance: 0x00400000, D:\...\OperatorInterfaces\NI\Full-Featured\CVI\TestExec.exe
Error Code: -143
Active X control error
The actual error window is attached. Looks like my installation has other problems? With the way our IT department operates, if there is a way to fix this without reinstalling, that would really be helpful... :-)
Attachments:
err4.JPG ‏20 KB

Modal message popup hangs parallel model in Teststand 4?

Hi:
I'm having a problem using the 'Make Modal' option on message popups. It is hanging the user interface.
Here is what I've done:
* created a sequence with just a message popup in it (using Teststand 4.0 editor)
* set the popup to be modal
* set the sequence to use the parallel model
* recompiled Full Featured CVI User interface for teststand 4.0 (using CVI 8.0.1)
* run sequence in the recompiled user interface
* popup is displayed
* after acknowledging the popup, the popup and the user interface freeze
If I change the sequence to use the batch model, everything works.
If I don't recompile the user interface project that came with Teststand and just run the exe, everything works.
What am I missing? Sequence file attached.
Thanks,
Dave
Attachments:
modalpopup.seq ‏6 KB

Hi dseel,
After I copied over your version of modelsupport2.dll, I see the attached error message for every test socket, basically saying that TestStand can't find a certain function in modelsupport2.dll.
What modifications did you make to the dll?
One thing though, I notice the same error message even with the Simple OI... Where are you putting modelsupport2.dll? In the same folder as the CVI Executable, or in <TestStand>\Components\NI\Models\TestStandModels?
Jervin Justin
NI TestStand Product Manager
Attachments:
TSErrorMessage.jpg ‏56 KB

Message popup with picture in CVI 7.1.1

Similar Messages

Maybe you are looking for