Control Connector (15 pin) Checking the Dir(CW) Pin#4 and Dir(CCW) pin#12
Hi,
I want to check the output (digital 5V) from my Control Connector in the UMI-7774 on Axis#1.
The Control Connector (15 pin) has Dir(CW) Pin#4 and Dir(CCW) pin#12
which i need to connect to my Servo motor drive (Forward and Reverse inputs in the Motor Drive, Both 24VDC).
I connect these pins : Dir(CW) Pin#4 and Dir(CCW) pin#12 to the Forward and Reverse inputs in the Motor Drive,
I use a 24vdc relay with 5v coil (of the relay), and as i test it in Motion Assistant the Servo motor NOT MOVE !
So, i wanted to test if the Dir(CW) Pin#4 and Dir(CCW) pin#12 actually output 5v and i connect for each one led (with resistor).
The circuit i connect for testing that is this:
[pin#11 (Digital ground) ] ---- [LED] ---- [RESISTOR] ---- [pin#4 Dir(CW) ]
same for pin#12 Dir(CCW)
i start Motion assistant for Simple move. Straigh Line Move. I hit "Start" and Nothing.. The Servo Motor doest move.
Please Note that the encoder of the Servo Works Fine. When i move manualy(by hand) the Motor
I see in the MAX that the encoder position changes.
In Addition, When i input 24vdc into the Motor Drive,
(i connect the 24vdc common into the Forward Input of the Motor Drive, in order to set the Motor Drive to Move Always Forward)
and then use the MAX or other Sample Program For simple move on One-Axis its work,
The Servo Motor Run and stops, i get the values from the encoder, the servo move.
BUT, why i cant move the Servo when the Dir(CW) Pin#4 and Dir(CCW) pin#12 connected Directly (through 24vdc relay offcurse)
To the Motor drive as it should be.
attached image for my umi and motor drive, the way i connect it.
Thanks for any help.
Best Regards,
Moti Mor
Attachments:
umi7774_ServoMotor.jpg 63 KB
III:
I see no one has responded to your multiple posts over the past few days. I'll try to help but I have no experience with the UMI-7774.
1. Could you please edit your diagram to show exactly how the relay contacts and coils are wired up. My intuiation is that the signals coming out of the UMI are inadequate to turn on the relays. A clear wiring diagram will help me figure out what may be happening.
2. What is the manufacturer and model number of the relays used. Or also provide a web link to a data sheet if possible.
3. What is the manufacturer and model number of the 3rd party servo drive.
Thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~
Similar Messages
-
I keep getting this message, I decided to delete whatever I can to free up some space. Then I get my few GBs I have left on the startup disk. Then after a day, I get the message again. I check the startup disk size and notice I have "zero kb" left. ??????
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
Restart your Mac after freeing up disk space then check Stoage again.
Another way to view avialable space:
Control click the MacintoshHD icon on your Desktop then click Get Info.
In the Get Info panel you'll see: Available & Capacity
Again, make sure there's at least 15% free disk space. -
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
RakeshHi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
hello my name is vicky i have an ipod classic 160 gb when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod i even checked the number of reallocs and pending sectors so please help me......for this
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
rankiHi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com -
I just purchased a Canon 7D Mark II, new DellXPS and the Lightroom 5.2. The Lighthouse is not openinging the 7DMark II but does open the older 7D that I imported. I checked the Abode update page and do not see one for the 7D Mark II. Please say it is there - if not when. I am "on hold till its done. Thanks.
Update to the current release, which is Lightroom 5.7.1. You can do this from the Lightroom help menu and choosing updates.
-
I keep on running into this when I try to save a download file. Any help would be appreciated.
'The action "Copy Finder Items" encountered an error. Check the action's properties and try running the workflow again.'
I tried clicking the button to change the save but that has no effect.Hi All,
I am having same issue too. Can anyone you advise? Thank you. -
Hi, I have Mac with Snow Leopard and was trying to purchase Lion , so I can move to I cloud, when trying to buy the app I get a message that a minimum 2gb of memory is required. I went check the hard disck info and it says available memory 20gb :-(
Apple Logo, left hand side of the menu bar, About this Mac. It should be right there. If not then More Info, Sys Info.
But it would seem you don't have 2GBs installed and more then likely both RAM slots are already filed. So you just need to buy more RAM in a pair. That could be 2 1GBs chips or if your Mac can have more then that then 2 2 GB chips or 2 4GB chips.
Get your model # and go to Crucial.com and use their memory search to find out how much your Mac can have installed and the price for it. I suggest you install as much as it can take. Cost is very low on RAM these days. -
I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
My daughters Ipod .7, the facetime keeps saying, Could not sign in, please check your network connection or try again. I checked the network on it, and it says connected. any other options?
FaceTime, Game Center, Messages: Troubleshooting sign in issues
-
Help-Task not found - Please check the Task Type, Name and Location are cor
HI all,
i have upgraded my owb from version 11gr1 to 11gr2. the installation is complete and all my mappings and objects are imported successfully.
i was able to execute the mappings using the sql code:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
by logging into sqlplus as the user in whose schema mappings are deployed.
hOwever, suddenly i am getting the error since sometime back - not sure what might have happened or what might have gone wrong. can someone please help me understand what might be wrong - how to decode this?
Here is my error:
@/oracle/product/11.2.0/owb/rtp/sql/sqlplus_exec_template.sql
Role set.
Enter value for 1: WSODS
Call completed.
Enter value for 2: ODS_SCHEMA
Enter value for 3: PLSQLMAP
Enter value for 4: MAPPING_1
Enter value for 6: ","
Enter value for 5: ","
Stage 1: Decoding Parameters
| location_name=ODS_SCHEMA
| task_type=PLSQLMAP
| task_name=MAPPING_1
Stage 2: Opening Task
begin
ERROR at line 1:
ORA-20001: Task not found - Please check the Task Type, Name and Location are
correct.
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 759
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 910
ORA-06512: at line 2When i execute this: i get the result as follows:
SELECT warehouse_object_id, store_id, object_type_id, object_type_name, object_name FROM owb$wb_rt_warehouse_objects
where object_name = 'MAPPING_1';
WAREHOUSE_OBJECT_ID STORE_ID OBJECT_TYPE_ID OBJECT_TYPE_NAME OBJECT_NAME
15947 15325 769 PLSQLMap MAPPING_1
1 rows selectedEdited by: Chaitanya on Mar 5, 2012 3:33 AMHi Chaitanya,
Did you get any resolution for this error? I'm facing the same error while trying to execute OWB mapping through this command.
Any help would be much appreciated. Thanks.
Regards,
Jagari -
When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either. Replying used to work fine, but all of my replies are sent to my inbox, instead of going to the recipient. I've made sure that the recipient's email address is in the send to box.
Read please this posted by Tanzim
Cause of the issue
Gmail webmail accounts do not have separate sent items and inbox folders. The Gmail account web page contains a Sent Mail link on the left side, but this is not a separate folder from the inbox. Gmail webmail messages are grouped into conversations, resulting in all sent messages and replies from others appearing as a single email message entry in the inbox. This allows for easy reading and viewing on the Gmail web page, but, when integrated with the BlackBerry Internet Service account, results in copies of sent email messages arriving on the BlackBerry smartphone as new email messages.
Resolution
To prevent sent messages from returning to the BlackBerry smartphone each time, create a filter in the BlackBerry Internet Service account to block the sending of those messages to the BlackBerry smartphone.
To create a filter, perform the following:
Log in to the BlackBerry Internet Service account. For instructions on how to log in to the BlackBerry Internet Service account, see KB03781.
Click the Filters icon next to the integrated Gmail account.
Click Add a Filter to create a new filter.
Configure the filter so that email messages are not sent to the BlackBerry smartphone if the email message originates from the Gmail webmail account integration:
Type a name for the filter into the Filter Name field. For example, My sent Gmail email messages.
Set the Apply filter when field to "FROM" field.
Type the Gmail webmail address into the Contains field. For example, <user name>@gmail.com>.
Select the radio button beside Do not forward messages to device.
Click Add Filter.
Note: After creating this filter, email messages will not be received on the BlackBerry smartphone if sent from the Gmail webmail account.
Source: KB10332 (with graphical depiction)
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved. -
Checking the number Activations allowed and remaining on registered Adobe products
Where in Adobe do I go to verify remaining product activations. I have installed 2 registered Adobe programs but have download the final install for these versions. I have the links for download and I have valid keys. I have deactivated one product but before uninstalling and installing the correct updated version I wanted to check that the activation approval was returned to my program. I went to my adobe account and found the keys for each product, however the number of approved installs was not listed. Is there somewhere else on the site I can check for remaining approved installs or do I have to call Adobe by phone. I do not want to uninstall and reinstal them unless I am certain I have been credited when I deactivated the program
Thanks for looking and I hope to get an answer.FYI:
Both products had to be deactivated then uninstalled before they could be reinstalled.
Photoshop CS3 went fine however I had to download the 10.0.1 upgrade zip file as the download version was the same as my disk.
Acrobat 9 Pro is another story. The product would not completely uninstall using windows 7 control panel, as such, the install process would not work. After many attempts I finally had to download the removal tool version 2 which is also good for Acrobat 9. This tool cleaned all of 9. The install exe worked fine until I got to entering the serial number (copied and pasted from my account) the message back " this is an invalid serial number". I had 2 activations and have only activated on this machine and I deactivated before uninstall. I guess I'll have to call Adobe to get my activations back.
The who;le process has been very frustrating indeed. I hope this info helps you should you receive other questions regarding this issue with Adobe 9 Pro Extended and Photoshop CS3. -
Please check the below Cursor Procedure and correct that code Please
Hai Every One.
Please check the below code I have two issues in that code
1. Invalid cursor
2. Record must be enter
Please correct this code and send me pls its urgent.I cont understand where i done mistake
PROCEDURE fetch_detail_PROC IS
cursor c1 is select * from quota_mast where quota_mast.divn=:quota_mast.divn and quota_mast.QUOT_tyPE=:quota_mast.QUOT_tyPE and quota_mast.INQNO=:quota_mast.INQNO;
cursor c6 is select * from quota_det
where quota_det.divn=:quota_mast.divn AND quota_det.QUOT_TYPE=:quota_mast.QUOT_tyPE and quota_det.enq_num=:quota_mast.INQNO
ORDER BY quota_det.quot_no;
--cursor c5 is select * from acc_mst where cdp=:quota_mast.ccdp and divn=:quota_mast.divn;
--vn acc_mst%rowtype;
i quota_mast%rowtype;
detail1 quota_det%rowtype;
BEGIN
GO_BLOCK('quota_mast');
for i in c1 LOOP
:quota_mast.INQNO:=i.INQNO;
:quota_mast.DIVN:=i.DIVN;
:quota_mast.QUOT_NO:=i.QUOT_NO;
:quota_mast.quot_type:=i.quot_type;
:quota_mast.CCDP:=i.CCDP;
select nm into :QUOTA_MAST.PARTY_NAME from acc_mst where acc_mst.DIVN=:QUOTA_MAST.DIVN AND acc_mst.cdp=:ccdp;
:quota_mast.pak_for:=i.pack_for_PER;
:quota_mast.exc_duty:=i.exc_duty_PER;
:quota_mast.vat:=i.vat_PER;
:quota_mast.cst:=i.cst_PER;
:quota_mast.wct:=i.wct_PER;
:quota_mast.ser_tax:=i.ser_tax_PER;
:quota_mast.insu:=i.insu_PER;
:quota_mast.tot_tax:=i.tot_tax;
:quota_mast.tot_val:=i.tot_val;
:quota_mast.value:=i.value;
next_record;
end loop;
first_record;
GO_BLOCK('quota_det');
for detail1 in c6
loop
:quota_det.quot_no:=detail1.quot_no;
:quota_det.ENQ_NUM:=detail1.enq_num;
:quota_det.item_code:=detail1.item_code;
SELECT ITNM into :NM FROM itm_MST WHERE DIVN=:quota_mast.DIVN AND iCDP=:ITEM_CODE;
:quota_det.price:=detail1.price;
:quota_det.qty:=detail1.qty;
:quota_det.DISC_PER:=detail1.DISC_PER;
next_record;
END LOOP;
first_record;
close c6;
--close c1;
exception
when others then
message(sqlerrm);
message(' ');
END;
Thank you..Oracle Forms is closely tied to the database meaning you can base your data blocks on your tables and Forms will handle fetching the data. I agree with Christian, your tables lend themselves to using a master - detail configuration and if you need to filter your block then you can use the Data Block WHERE Clause property.
Please correct this code and send me pls its urgent.As to the urgency of your request, the forum is a community of "Volunteers." Enough said.
Regarding your code, I see a several potential problems.
First, how are your QUOTA_MAST and QUOTA_DET blocks synchronized? Are you using a block relationship? Are you using a combination of triggers to synchonize the QUOTA_DET block when you user navigates to a different record in the QUOTA_MAST block?
Second, your Procedure name is "Fetch_Detail_Proc" but you are also fetching Master data as well. What is the purpose of your procedure and where do you call this procedure?
Third, you're using SELECT * in your cursor queries. You should always explicitly name each column. What happens when your table changes and you need to search your code for a column that was dropped?
Fourth, your cursor queries are referencing the same data blocks you are fetching data to populate. This gives the impression that you already have data in your block. This doesn't make sense - could you explain what you are trying to accomplish?
Fifth, with respects to your code, the "Invalid Cursor" error (is this really the error you're getting?) is most likely caused by your explicit call to close the C1 cursor. As Andreas stated, when using a CURSOR FOR LOOP, the cursor is automatically opened, fetched and closed using this construct. There is no need to explicitly close the cursor, in fact - doing so will result in an invalid cursor error.
As to the "Record must be entered" error, is sounds like you have required items in your block or your QUOTA_MAST block is not synchronized with your QUOTA_DET block, so when you attempt to navigate to a different block or record within your the same block the navigation cursor can't move because you haven't entered data that is required.
Please tell us what you are attempting to do with this code so we can tell you if you are using the correct method.
Craig...
Maybe you are looking for
-
I just downloaded the newest version of Itunes on my Windows 7 PC. I can't delete anything and I can't sync to my MP3 player. I tried deleting it and installing an earlier version of Itunes but it can't read the library. Please help.
-
Where is the syntax error in my Insert statement?
It says that there is a syntax error in my insert statement, pointing to the .ExecuteNonQuery() at the end: 'Defining the activity ID from the datatable Dim ActivityID As Integer = DataTableActivities.Rows(0).Item(0) 'Defining the calories from the d
-
k
-
Can we make the background of the graph transparent? The requirement is to superimpose two graphs on each other the way we do it in Xcelsius. Any help appreciated Env : BO XI 3.1 or BO XI R 2 both RTM with no Servcie Packs Thanks -P
-
Behavior of Folder shortcuts (right end of Dock) carried over from Tiger
I recently migrated from Tiger 10.4.11. Migration Assistant brought my account settings, including my Dock (thank you very much). I noticed that if I add a new Folder shortcut to my Dock, it behaves in std Leopard fashion, Fan/Grid/the works. If I cl