Checking the number Activations allowed and remaining on registered Adobe products

Where in Adobe do I go to verify remaining product activations. I have installed 2 registered Adobe programs but have download the final install for these versions. I have the links for download and I have valid keys. I have deactivated one product but before uninstalling and installing the correct updated version I wanted to check that the activation approval was returned to my program. I went to my adobe account and found the keys for each product, however the number of approved installs was not listed. Is there somewhere else on the site I can check for remaining approved installs or do I have to call Adobe by phone. I do not want to uninstall and reinstal them unless I am certain I have been credited when I deactivated the program
Thanks for looking and I hope to get an answer.

FYI:
Both products had to be deactivated then uninstalled before they could be reinstalled.
Photoshop CS3 went fine however I had to download the 10.0.1 upgrade zip file as the download version was the same as my disk.
Acrobat 9 Pro is another story. The product would not completely uninstall using windows 7 control panel, as such, the install process would not work. After many attempts I finally had to download the removal tool version 2 which is also good for Acrobat 9. This tool cleaned all of 9. The install exe worked fine until I got to entering the serial number (copied and pasted from my account) the message back " this is an invalid serial number". I had 2 activations and have only activated on this machine and I deactivated before uninstall. I guess I'll have to call Adobe to get my activations back.
The who;le process has been very frustrating indeed. I hope this info helps you should you receive other questions regarding this issue with Adobe 9 Pro Extended and Photoshop CS3.

Similar Messages

Hello my name is vicky i have an ipod classic 160 gb when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod i even checked the number of reallocs and pending sectors so please help me......for t

hello my name is vicky i have an ipod classic 160 gb when im syncing songs to ipod classic it is get stucked and a small noise is coming from back endof the ipod i even checked the number of reallocs and pending sectors so please help me......for this

Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away.

How to check the number of remaining downloads on DPS dashboard?

I think that after the renewal of Adobe DPS,
Professionl/ Enterprise Edition users can chek the number of remaining downloads on DPS dashboard.
How to check the number of remaining downloads on DPS dashboard?
shimoawazu

Is there a way to determine how many downloads have occurred on a professional account? We have multiple apps on the Apple and Android app stores and would like to know how many downloads from our first 5,000 have been used. Is there a way to view analytics from all of our apps at one time instead of having to log in to digitalpublishing.acrobat.com separately for each app?
Andrew

How to check the number of contacts with segment level 'food and beverage' in the segment builder?

How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.

How to check the number of contacts with segment level 'food and beverage' in the segment builder?
Do we have any table to check this.

Where do i go to check the age of a site and their SEO strength? Am i able to check the number and quality of links to their sites?

I would like to check the age of a site in an industry I am thinking of going into.
I would like to check the strength of their on page SEO.
I wold like to check the number of links they have on their site and the strength of those links.

Not a Firefox question.

Check next number (activity code)

Good day experts.
This is the issue we are currently importing a SFC into the system or using the supplier barcode for the SFC inside visprise. We unfortnately use two diferent product types from the same supplier where the two don't really have any differeneces. The products are hard drives one is 40 gig and the other is a 80 gig, but inside visprise we are having troubles keeping the product seperated.
We are wanting a way to check the barcode, because the part number is inside this barcode from the supplier to seperate the two inside visprise.
I thought about using check next number activity code, but unfortnately this isn't getting the job done. I was wondering if I was doing something wrong. As of right now I have the acitivity codes create SFC as Pre-start and check next number as a pre-validate start. I have tried changing the hook point, but nothing seems to work. I can force it to not work at all or work for everything.
I have a setup the next number maintenance and I can print out the correct barcode for this material, but I can't prevent us importing a incorrect barcode.

Basically this is what is happening. We are 'importing' Barcodes into the data base. Problem lies we have two materials that are very close to each other (both hard drives) they are getting mixed inside the test equipment causing us to much down time. I was reading up on the activity codes and was wondering how next number maintenance or mask valiation was working inside SAP ME. To try and prevent the confusion.
The biggest differences between the materials, that concerns SAP ME, is the barcode format. The two different part numbers are inside the the supplier barcode that is given to us, which we are currently using for our SFC in SAP ME.
It isn't a requirement for me to use SAP ME, but I was exploring every avenue. If it is true that these only work at the specific points that the help site is suggesting i will try a different avenue, this is looking very possible right now. I have tried using the activity codes with no luck in succeeding in the goal.

The table name or tcode to count the number of Dimensions and Key Figures

Hi all,
Do you have an idea about the table name or tcode to count the number of Dimensions and Key Figures of an Infocube WITHOUT installing the cube from Business Content?
Thanks in adv.
Ajay

Hi,
You can't do that because there's no active table in the system for the Business Content since it hasn't been installed yet...
One thing you could do is go to the Business Content Tab, select "Infoproviders by InfoArea" on the left side, look for the Cube or DSO you want to check, right click on it and select "Display Description".
On the window that opens you'll have a list of all InfoObjects and Key Figures. You also have the option to Display it as Start Schema, where you can see the Dimensions, etc.
Hope this helps.
Luis

Visio 2010 Validation for Checking the number of a specific type of shape.

I have written a rule for flowchart for checking the number of Start/End Shapes in a document.
The FilterExpression is as follows:
AGGCOUNT(FILTERSET(SHAPESONPAGE(), HASCATEGORY("Start/End"))) > 0
The TestExpression is as follows:
AGGCOUNT(FILTERSET(SHAPESONPAGE(),HASCATEGORY("Start/End"))) = 2
(Since totally there are 2 shapes: 1 Start and 1 End Shape)
However, it is not working. Can anybody tell me what is wrong in the expressions.

Well, it worked for me, so I want to check that you modified the Start/End master to have the User.msvShapeCategories row with the value "Start/End", as I did?
A Category is not a Master
David J Parker MVP (Visio) http://blog.bvisual.net

HT1338 My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds. Can you help me?

My MacBook Air is very slow. Every time I click the mouse, the spinning wheel appears and remains for up to 30 seconds before the screen changes. This has been happening the past 24 hours. Any ideas?

First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Every time I get to the stage "uploading artwork and remaining songs" I get the following error : "ITunes as stopped working"

I have an issue with ITunes match. Every time I get to the stage "uploading artwork and remaining songs" after 5-10 items have been uploaded I get the following error message :
"ITunes as stopped working. a problem caused the program to stop working correctly."
_ Windows 7 (up to date)
_ ITunes => up to date => 11.0.2.26
_ I've already re-installed ITunes and all his components => same issue
_ this error only appear at the stage "uploading artwork and remaining songs"
errors found in Windows logs :
1/ Bonjour Service :
Client application bug: DNSServiceResolve(d8:d1:cb:e8:f5:14@fe80::dad1:cbff:fee8:f514._apple-mobdev._tc p.local.) active for over two minutes. This places considerable burden on the network.
2/ Application error:
"Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b83b16
Exception code: 0x80000003
Fault offset: 0x0003491e
Faulting process id: 0xf34
Faulting application start time: 0x01ce2bc093c6d4b0
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 5e7e1edc-97ba-11e2-9678-00123f3961ed

Hope that the following can help some of you having the same issue :
When I run the Network Diagnostics in iTunes. And I got the following error :
"Secure link to iTunes Store failed".
So I followed this tread and this is what I tried so far :
https://discussions.apple.com/thread/3911927?start=0&tstart=0
ipconfig /flushdns         => same issue
netsh winsock reset       => same issue
Followed the kb TS4123 => no other Winsock Providers that Bonjour
SFC /SCANNOW    => same issue
ipconfig /release    => same issue
ipconfig /renew         => same issue
netsh winsock reset catalog   => same issue
After doing all this tests when I run the Network Diagnostics I still get the same error :
"Secure link to iTunes Store failed".
The strange thing is that I tried to start again the ITunes match and it's seems to work so far. 41 items uploaded and no crash so far (before it was always crashing before I could reach 10 upload).

How check the number range buffers in bw..

can any one tell me the procedure...
how to check the number range buffers in sap bw,,,,can any one help me on this???
regards

Please follow the steps mentioned below for checking the number ranges:
TCODE: /nse37
FUNCTION MODULE: RSD_CUBE_GET
Then click F8
From there I_INFOCUBE : Cube name(Here we can give the cube names from /nrsa1(click on infoprovider on leftside menu)
I_INFOCUBE                      Cubename
I_OBJVERS                       A
I_BYPASS_BUFFER                 x
I_WITH_ATR_NAV
Click on F8
In Export Parameters : select below one
E_T_DIME
There we will get the Time stamp and number range
Regards.
Message was edited by:
        cnu babu

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How to check the number of licences for ODI

Hi,
I would like to know , how to check the number of licences exists for my current OID.
ODI Version: 11.1.1

ODI licensing is similar to Oracle DB licensing. Its licensed by the number of cores in your target database.
So, count the number of CPUs in your target box. Multiply them by the core factor (x86 vs sparc, etc) and then match with the paperwork you have :D

When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either.

When I reply to an email, instead of sending it to the recipient, it sends it back to me. I've checked the sent mail folder and the reply is not there either. Replying used to work fine, but all of my replies are sent to my inbox, instead of going to the recipient. I've made sure that the recipient's email address is in the send to box.

Read please this posted by Tanzim
Cause of the issue
Gmail webmail accounts do not have separate sent items and inbox folders. The Gmail account web page contains a Sent Mail link on the left side, but this is not a separate folder from the inbox. Gmail webmail messages are grouped into conversations, resulting in all sent messages and replies from others appearing as a single email message entry in the inbox. This allows for easy reading and viewing on the Gmail web page, but, when integrated with the BlackBerry Internet Service account, results in copies of sent email messages arriving on the BlackBerry smartphone as new email messages.
Resolution
To prevent sent messages from returning to the BlackBerry smartphone each time, create a filter in the BlackBerry Internet Service account to block the sending of those messages to the BlackBerry smartphone.
To create a filter, perform the following:
Log in to the BlackBerry Internet Service account. For instructions on how to log in to the BlackBerry Internet Service account, see KB03781.
Click the Filters icon next to the integrated Gmail account.
Click Add a Filter to create a new filter.
Configure the filter so that email messages are not sent to the BlackBerry smartphone if the email message originates from the Gmail webmail account integration:
Type a name for the filter into the Filter Name field. For example, My sent Gmail email messages.
Set the Apply filter when field to "FROM" field.
Type the Gmail webmail address into the Contains field. For example, <user name>@gmail.com>.
Select the radio button beside Do not forward messages to device.
Click Add Filter.
Note: After creating this filter, email messages will not be received on the BlackBerry smartphone if sent from the Gmail webmail account.
Source: KB10332 (with graphical depiction)
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

When I try to FaceTime on my ipad it says face time failed please check the number but it says this on every number

When I try to FaceTime on my ipad it says face time failed please check the number but it says this on every number and I know thier correct

Read this
http://support.apple.com/kb/TS5419
As of april 16 every device that uses facetime must be updated to acertain level or it won't work. And the 'catch' is that it applies to your device and the person you're calling.

Checking the number Activations allowed and remaining on registered Adobe products

Similar Messages

Maybe you are looking for