Control ESS Open Enrollment to use adjustment reason instead of open offer

Hi :
We would like to control open benefit enrollment with adjustment reason instead of standard open offer. Plans are configured for adjustment reason 'OPEN', IT0378 created for the ee with this reason, and open enrollment period is configured . I use
'EMPLOYEE_OPEN_ENROLLMENT_SERVICE05' as my resource.
However, it keeps bringing up plans from standard open offer as versus to plan configured for adjustment reason 'OPEN'. Debugging through, I could see that it passes enrollment type 'O' (for open) instead of 'E' (for event) in 'SELECTED_ENROLL_REASON' to function 'HR_BEN_ESS_RFC_INIT_SELECTION' which in turn would cause it to select plans from standard open period instead of plans configured for 'OPEN' adjustment reason.
What could I do to force ESS to use 'E' instead of 'O' ? I try to avoid having to create an enhancement point for the above fucntion to alter the field.
Thanks.

Double-post - closed

Similar Messages

ESS Benefit Enrollment - No correct adjustment reasons specified

We are in ECC 60. When testing ESS benefit open enrollment (under Content Admin - Portal Content - Content Provided by SAP - End user content - ESS - Iviews - Benefit and Payment - then either test on 'Enrollment' or 'Flex Bens Enrollment)', we keep getting error 'No Correct adjustment reasons specified' .
I already configured 'Benefit Area Admin Paramenter' to have open enrollment period to be active for month of April (for testing), and also assigned proper role in 'URL of PCD Page' for resource key 'EMPLOYEE_GENERICENROLLMENT_SERVICE05', and yet still get the error message. Searching SDN for this issue, I see that some people also had similar issues before, but there doesn't seem to be a concrete / clear solution. Appreciate if someone can shed some light on what I'm still mising .
Thanks.

Hi Ted,
Not sure if this would help.
You can try the below thread..... It also has reference to an OSS Note.
[Adjustment Reason;
Good Luck !!!
Kumarpal Jain.

My Preview is open all my pics at time instead of open one by one. It occurs when I try to open any type of JPEG file. That's strange and I'm a new macbook user. I hope somebody can help me out. Thanks

My Preview opens all my pics at time instead of open one by one. It occurs when I open any JPG FILE. What should I do to fix it? Thanks

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

Open adobe reader file - read option - instead of open

When I try to open a adobe reader file by right clicking it I get " read" instead of "open " file.
please see attached file for an example of what I mean.
In the attahed printed screen file it says open - this is OK.
but in my other pc I have only "read" not open.
your help would be appreciated
Thanks
Omer

If I press Read the file opens OK with no problem.
The problem is that if I try to open the same file from a third party program it does not open .
The file looks like it does know what windows extension it is supposed to be.
I will try to post a screen shot from the other PC
thanks

Photoshop Elements12 - crashing when using Adjustment Layers. When opening the drop down menu there are 'boxes' for Black

Does anyone else have problems using the Channel Mixer?
This problem only started after the opening screen started to 'advertise' the advantages of moving to Cloud

Which operating system are you using?
Can you post a screenshot of what your seeing with the menus?
All adjustment layers cause pse 12 to crash or only certain ones?
The channel mixer adjustment layer isn't included with pse 12, so did you download an action for the channel mixer adjustment layer?
I never use the welcome screen since it seems to cause so many problems with the elements versions that have it, but rather make a shortcut to the editor and/or organizer and use those instead.

DWCC File:Open tries to use EVERY OTHER APPLICATION to open file

Hi
I'm on Dreamweaver CC and when I go to open a file it tried using my CS6, CS5.5, CS5 and finally CS4 versions of Dreamweaver to open the file (a .cfm file). I uninstalled ALL of those files and now, when in Dreamweaver CC I go to File: Open it automatically opens Apple Numbers, attempting to open the file.
Anyone know how to actually open a file with Dreamweaver and get Dreamweaver to actually open it?
Thanks in advance,
Rich

If you don't want to add the Legacy Extension or get the paid extensions from DMXZone, and you're a CC subscriber, you can have both DWCS6 (with database functionality by default) and DWCC installed at the same time under the same subscription (no additional cost). They just don't run at the same time.
Here's how you add DWCS6 through the Creative Cloud...
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
Maybe if enough people request that the database features get added back, Adobe would return them to the program? It's happened with other features.
Here's the official form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

I have Firefox pinned to the Task bar in Windows 7. After upgrading to Firefox 9 when I open firefox I get an extra firefox icon in my task bar while having firefox open. It used to show as being open on the icon that is pinned to the task bar.

* Installed Firefox 9
* I am running Windows 7 64-bit
* I have Firefox pinned to the task bar.
* When Firefox opens, there is a new icon that opens up on the task bar. Normally, Firefox would open within the icon that is pinned to the task bar.
* When I close Firefox, the extra icon goes away.
* Firefox is acting like the icon that is pinned to the task bar is not even there.

Before attempting the steps below, I would highly suggest you visit the latest known issues for the current version, specifically FF 9 release notes.
See:
[[Latest Firefox issues]]
1. Unpin the old firefox icon
2. Go to c:\Program File (x86)\Mozilla Firefox\
3. Double click on "firefox.exe" (FF window & icon will appear in supertaskbar)
4. Pin this new icon by right clicking > Pin to Taskbar (Firefox Icon turns into whitebox)
5. Make sure that you see the hidden folders
[[windows.microsoft.com/en-US/windows7/Show-hidden-files]]
6. Go to C:\Users\%yourusername%\AppData\Local
7. Delete "IconCache.db"
8. Open the taskmanager
9. Kill explorer.exe by clicking on End Process
10. In the taskmanager, File -> New Task (Run...) --> write "explorer.exe" without the quotation mark, press ok

Hello, how can i modifie in the options, aplications, Adobe acrobat document, open with Adobe acrobat (in Firefox) instead of open with portable document format (default). Thanks

I can'T open pdf links in another page, because in options, aplications i have in Adobe acrobat documents open with portable document format (default) and i must put open with Adobe Acrobat (in firefox) default.
Where can i change the default?
Tnaks

All you now have to do is use that variable to the value property of your text field... So add this at the end of your code:
this.getField("Conference_Option").value = ConferenceOpportunity;
Also, I would use MouseUp, not MouseDown.

How can I force the browser to prompt user to open or save a pdf document instead of opening it in the browser window?

Change the MIME type for pdf from application/pdf to something else, such as application/octet-stream.
You can change MIME types through the administration server or by editing the mime.types configuration file. The Administrator's Guide at http://docs.iplanet.com has more information.

Enrollment Form Not Visible for Adjustment Reasons

Hi Experts,
I am having an issue with the Benefits enrollment not being displayed in the ESS portals. We are using an adjustment reason based open enrollment . The link is visible if give the event name as BENP_EVENT = OPEN which points to the form with standard open enrollment form listing all plans but we want to use 'OPN' (custom reason) instead of 'OPEN'. If i change the event to BEN_EVENT= OPN, it is displaying the link but not unable to read the employee and throwing an error saying, "infotype IT0171 doesnot exist for 00000'. Listed below is my configuration.Your help is much appreciated.
Adjustment Reason:
Form Setup:
Launchpad Link:
Launchpad Config:
Ess Page:
Thanks,
Vishnu

Hi Shankar,
Thanks!! for the reply. The application is in active mode only. The system is only taking the event name(BENP_EVENT = OPEN). I have to create another adjustment reason with 'OPEN' name just for form purpose and keeping my 'OPN' as is for my enrollment purpose. The problem is with 'OPEN' it lists out all the plans , even the ones that we don't want to show.
Thanks,
Vishnu

Open Enrollment Form, adding new coverage level

Hi All
We have recently added Domestic partner level as an option in our Health Insurance Plans. I believe I have correctly added the new plans etc because they are showing up on the open enrollment form. The problem is the new plan is only showing up with the old coverage options (i.e. single, ee & spouse, family etc) and is missing the new Domestic Partner and Spouse coverage option that I added. Please advise on how to get it to show up on the form.
Thanks in advance

Hi Ken,
What i understand is... you have done the following
Health Plans: IMG ->Personal Management->Benefits- >Plans->Health Plans
1. You have setup the config in Define Health Plan General Data.
2. IMG >> Personal Management->Benefits- >Plans->Health Plans->Define Dependent Coverage Options
Set up your Domestic Partner option here i.e. E+DP (Min: 1 / Max: 1)
3. Setup the Cost Variants in the node IMG->Personal Management->Benefits- >Plans->Health Plans->Define Cost Variant
4. Setup the Cost Rules in the node IMG->Personal Management->Benefits- >Plans->Health Plans->Define Cost Rule
5. Assign the health plan attriubtes in the node IMG >>Personal Management->Benefits- >Plans->Health Plans->Assign Health Plan Attributes. I guess this is what you missed.
One question here......are you using Adjustment reasons for adding new coverage???
Kumarpal Jain.

Open Enrollment form

I was just tasked with creating an open enrollment form for courses my company would be offering to the general public.
What would the best way to do this be?
My employer would like to be able to see the dates of the courses, people choose a day(s) and enroll.
What would be the best way to do this?
I was thinking of just something like a contact form and then we get back to them (payment isn't going to be collected via the online enrollment form)
However, this method would not allow immediate feedback on if that course was full.
Can someone help me or point me in the right direction on how to pursue this project?

If your server supports PHP & MySql, you should look for a PHP booking/reservation system.
https://www.google.com/search?q=php+booking+systems&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla :en-US:official&client=firefox-a
If your server doesn't support PHP & MySql, find out which programming languages you can use and search accordingly.
Nancy O.

Renaming a plan for open enrollment - plan name doesn't seem to date track

Hi,
Has anyone ever renamed a plan. here is our situation.
for 2012 we currently have 3 medical plans to choose from, to keep it simple... plan A, plan B, Plan C. The approach we thought would be the easiest would be rename plan A to be Plan X for then 2013 open enrollment. to see Plan X for the open enrollment period (nov 1 - nov 30) we changed the plan name on Oct 31. In addition we would end the eligibility for the other two plans on 31-dec-2012.
so on Jan 1st Plan X is eligible, Plan B and Plan C are not. for the 2013 open enrollment Plan X (formally plan A) is the only plan available to select. which is what we want and open enrollment looks ok.
The issue we see is with any new hire or other life events that allows enrollment for 2012. they see plan x, plan b, and plan c as option. We still need to show Plan A, plan B, and plan C as options for the remainder of 2012.
I tried to rename the plan effective 01-jan-2013, but then the open enrollment still shows the same 2012 (plan A) during the enrollment period.
i expected the open enrollment to use the plan name that for the date tracked time 01-jan-2014, even though the enrollment period for 2013 is nov1 - nov30...
thought any one?

Hi,
Has anyone ever renamed a plan. here is our situation.
for 2012 we currently have 3 medical plans to choose from, to keep it simple... plan A, plan B, Plan C. The approach we thought would be the easiest would be rename plan A to be Plan X for then 2013 open enrollment. to see Plan X for the open enrollment period (nov 1 - nov 30) we changed the plan name on Oct 31. In addition we would end the eligibility for the other two plans on 31-dec-2012.
so on Jan 1st Plan X is eligible, Plan B and Plan C are not. for the 2013 open enrollment Plan X (formally plan A) is the only plan available to select. which is what we want and open enrollment looks ok.
The issue we see is with any new hire or other life events that allows enrollment for 2012. they see plan x, plan b, and plan c as option. We still need to show Plan A, plan B, and plan C as options for the remainder of 2012.
I tried to rename the plan effective 01-jan-2013, but then the open enrollment still shows the same 2012 (plan A) during the enrollment period.
i expected the open enrollment to use the plan name that for the date tracked time 01-jan-2014, even though the enrollment period for 2013 is nov1 - nov30...
thought any one?

"File is already open or in use by another application"

I get "File is already open or in use by another application" when opening a PDF in Acrobat and Reader. Only happens intermittently.Files are on a network share.
It doesn't seem to happen as often if Acrobat/Reader are already running. Sometimes it works on the 2nd try, other times it takes upwards of 7 or 8. Not entirely sure if this is an Adobe issue as I've completely reinstalled both programs.
Any help would be appreciated. Thanks.
Ben

Jenifer,
I've been dealing with this problem for a year, and it is a big time waster. Here is a solution someone gave me which resolves the problem. However, there is a tradeoff- one problem for another.
There is a file named aiicon.dll in Program Files > Common Files > Adobe > Shell. If you rename this file to aiiconold.dll (don't delete it), the problem with saving and deleting files will be resolved. However, the tradeoff is that you will lose your Illustrator thumbnails for your AI files. See for yourself. I've been doing it this way for a month or two, and I can live without the thumbnails most of the time. The nice thing about renaming the aiicon.dll file is that you can go back to the original name anytime, and everything will be as it was in the beginning.
I guess Illustrator has an incompatibility issue with the new operating systems. I don't think there are any perfect solutions. But I keep looking. I am as frustrated with AI as you are.

U/tube videos open when using Safari but will not open when using Firefox.

u/tube videos open fine when using Safari but will not open when using Firefox. With Firefox I get the unhighlighted Quicktime symbol with a question mark in the center. WHY?? Any help appreciated --- Toroya

Hmmmm, strange you view YouTube in Safari & not FF. Which version of FF are you using?
Try the following:
Repair permissions & restart.
Make sure you have the latest versions of Adobe Flash Player Software
QuickTime Preferences > Advanced > MIME Stettings > Miscellaneous.
Deactivate the "Flash Media" option.

Control ESS Open Enrollment to use adjustment reason instead of open offer

Similar Messages

Maybe you are looking for