Control in Delivery and Billing Document

Dear Experts,
We are facing the following issue, Retun Order process (Ret.Order(reference of invoice)-DEL-CR) completed,
the user has cancelled the preceeding invoice and they have the reversed the delivery document,
how do we control the delivery document, because delivered qty has been reversed with return ordered process,PGR and Cr.Memo also happened,
kindly help me out, is there any control can we use if the preceeding delivered qty has been reversed with return order process, it should not allow the user to cancel the invoice and reverse the delivery.
Please help me on this
Earliest solution is highly appreciated,
Thanks and Best Regards,
Muralidharan S

Dear,
if you give the rights of cancellation to user then it is happen again and again. so, with the help of your basis team you just cancel the invoice cancellation right from user SAP ID and give the rights to authorize person who only have rights to cancel the invoice.
That's the standard way.
Hope it will help you.
Regards,
Sandip

Similar Messages

From which tables i would find the delivery and billing document field..??

I need to create an ALV report which displays the following details in the output.
Order No Item No     Material     Order Qty     Item Category     Plant     Delivery     Billing Document     Sales Org     Dist Channel     Division     Created By     Created On      Changed On
For(Order No Item No     Material     Order Qty     Item Category     Plant) i took the fields from vbap and
for(Sales Org     Dist Channel     Division     Created By     Created On      Changed On)i took the fields from vbak..
From which tables i would find the delivery and billing document field related to sales document.??
need help...
Moderator message : Requirements dumping not allowed, thread locked.
Edited by: Vinod Kumar on Mar 6, 2012 2:53 PM

i am new to abap...so i dont have idea about sd table relationship.
so please reply how to add delivery and billing doc in my coding below..
*& Report ZINAA_SD
REPORT zinaa_sd.
TABLES: vbap, vbak, vbfa.
TYPE-POOLS: slis.
CONSTANTS: c_x TYPE char1 VALUE 'X'.
TYPES:
        BEGIN OF st_vbap,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
        END OF st_vbap,
        BEGIN OF st_vbak,
          vbeln TYPE vbak-vbeln,
          erdat TYPE vbak-erdat,
          ernam TYPE vbak-ernam,
          vkorg TYPE vbak-vkorg,
          vtweg TYPE vbak-vtweg,
          spart TYPE vbak-spart,
          aedat TYPE vbak-aedat,
        END OF st_vbak,
       BEGIN OF st_final,
         vbeln TYPE vbap-vbeln,
         posnr TYPE vbap-posnr,
         matnr TYPE vbap-matnr,
         pstyv TYPE vbap-pstyv,
         kwmeng TYPE vbap-kwmeng,
         werks TYPE vbap-werks,
         erdat TYPE vbak-erdat,
         ernam TYPE vbak-ernam,
         vkorg TYPE vbak-vkorg,
         vtweg TYPE vbak-vtweg,
         spart TYPE vbak-spart,
         aedat TYPE vbak-aedat,
       END OF st_final.
DATA:
      lt_vbap TYPE TABLE OF st_vbap,
      ls_vbap TYPE st_vbap,
      lt_vbak TYPE TABLE OF st_vbak,
      ls_vbak TYPE st_vbak,
      lt_final TYPE TABLE OF st_final,
      ls_final TYPE st_final,
      lt_fieldcat TYPE slis_t_fieldcat_alv,
      ls_fieldcat TYPE slis_fieldcat_alv,
      layout TYPE slis_layout_alv,
      lt_sort TYPE slis_t_sortinfo_alv,
      ls_sort TYPE slis_sortinfo_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln,
                s_erdat FOR vbap-erdat.
SELECTION-SCREEN END OF BLOCK b1.
PERFORM select_data.
PERFORM loop_final.
PERFORM sort.
PERFORM a USING:
      'VBELN' TEXT-002,
      'POSNR' TEXT-003,
      'MATNR' TEXT-004,
      'KWMENG' TEXT-005,
      'PSTYV' TEXT-006,
      'WERKS' TEXT-007,
      'VKORG' TEXT-008,
      'VTWEG' TEXT-009,
      'SPART' TEXT-010,
      'ERNAM' TEXT-011,
      'ERDAT' TEXT-012,
      'AEDAT' TEXT-013.
PERFORM display.
*&      Form SELECT_DATA
      text
FORM select_data.
SELECT
   vbeln
   vkorg
   vtweg
   spart
   ernam
   erdat
   aedat
   INTO CORRESPONDING FIELDS OF TABLE lt_vbak
   FROM vbak
   WHERE vbeln IN s_vbeln AND erdat IN s_erdat.
IF sy-subrc = 0.
    SORT lt_vbak by vbeln.
ENDIF.
SELECT
   vbeln
   posnr
   matnr
   kwmeng
   pstyv
   werks
   INTO CORRESPONDING FIELDS OF TABLE lt_vbap
   FROM vbap
   FOR ALL ENTRIES IN lt_vbak
   WHERE vbeln = lt_vbak-vbeln.
IF sy-subrc = 0.
    SORT lt_vbap by vbeln.
ENDIF.
ENDFORM.                    "SELECT_DATA
*&      Form LOOP_FINAL
      text
FORM loop_final.
LOOP AT lt_vbap INTO ls_vbap.
    ls_final-vbeln = ls_vbap-vbeln.
    ls_final-posnr = ls_vbap-posnr.
    ls_final-matnr = ls_vbap-matnr.
    ls_final-kwmeng = ls_vbap-kwmeng.
    ls_final-pstyv = ls_vbap-pstyv.
    ls_final-werks = ls_vbap-werks.
    READ TABLE lt_vbak INTO ls_vbak WITH KEY vbeln = ls_vbap-vbeln BINARY SEARCH.
    ls_final-vkorg = ls_vbak-vkorg.
    ls_final-vtweg = ls_vbak-vtweg.
    ls_final-spart = ls_vbak-spart.
    ls_final-ernam = ls_vbak-ernam.
    ls_final-erdat = ls_vbak-erdat.
    ls_final-aedat = ls_vbak-aedat.
    APPEND ls_final TO lt_final.
    CLEAR ls_final.
ENDLOOP.
ENDFORM.                    "LOOP_FINAL
*&      Form SORT
      text
FORM sort.
ls_sort-spos = '01' .
ls_sort-fieldname = 'VBELN'.
ls_sort-tabname = 'LT_FINAL'.
ls_sort-up = c_x.
ls_sort-subtot = c_x.
APPEND ls_sort TO lt_sort .
ENDFORM.                    "SORT
*&      Form A
      text
     -->FNAME      text
     -->SELTEXT    text
     -->EMPHA      text
FORM a USING fname TYPE string seltext TYPE string.
IF fname = 'KWMENG'.
    ls_fieldcat-do_sum = c_x.
ENDIF.
ls_fieldcat-fieldname = fname.
ls_fieldcat-seltext_m = seltext.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR ls_fieldcat.
ENDFORM.                    "A
*&      Form ALV
      text
FORM display.
layout-zebra = c_x.
layout-colwidth_optimize = c_x.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   i_callback_program                = sy-repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
    is_layout                         = layout
    it_fieldcat                       = lt_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
    it_sort                           = lt_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = C_X
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
    t_outtab                          = lt_final
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "ALV

How to create Automatic Delivery and Billing documents immediate

Hello,
I want to create Automatic delivery and billing documnets immediate once I create a sales order.
E.g I need to see in the Status Bar the delivery and billing document was created.
Thank you in advance
Your help is highly appreciated
Alfaid

Please search in sales forum. Many times this was discussed there.
thanks
G. Lakshmipathi

How send an outbound delivery and billing document by FAX

How send an outbound delivery and billing document by FAX

Hi,
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
You have to create an RFC user for the RFC interface, so that you can receive messages in your SAP system. For each external communications system, create an RFC destination and a Node.
You can add more systems, that is, create new nodes, even during operation. Since new Customizing settings may be necessary, you can branch directly from SAPconnect administration to Customizing (for example, to maintain the rules for recipient number adjustment).
Outgoing messages are first stored in a queue. You have to schedule send processes so that the messages are sent from the queue to the external communications system. You can distribute incoming messages with inbound distribution using the recipient addresses.
You can also change the default settings for confirmations of receipt in the Internet. You can specify a default domain to enable messages to be sent externally to users or objects to which no Internet address is assigned.
The tools for monitoring and error analysis are available for monitoring sending. You can check the operating status of the external communication components in the SAP System and evaluate the send status of the documents. If errors occur, you can configure a trace that logs the processing of messages.
An overview of the settings that you have to make in the SAP System in order to enable sending can be found in the documentation on External Sending in the SAP System.
Hope this will help.
Regards,
Naveen.

Reverse/Cancel Outbound Delivery and Billing documents

Hi all,
My question is...How do you reverse/ Cancel Outbound delivery and billing documents and what will be the reversals in Accounting document and how are they updated.
Regards

Hi,
If billed delivery is to be reversed, Then
1. First cancel the billing with transaction code vf11
2.Then reverse the PGI with the transaction code VL09
3.Cancel or delete the Delivery in vl02n
4.Delete the sales order.
Accounting entries will be reversed by cancellation of the invoice and material movement will get reversed after doing VL09.
Reward points if it is helpful

Sales order, Delivery and Billing document creation

Hello Experts,
I am working on credit management and am in need of creating sales order, delivery and billing document.
Can some one send me the screen shots or any doc which outlines order,delivery and billing document creation.
Will award points definitely.
Also what are the t.codes for these creation?
Regards,
Sriram

Order Create:
Transaction VA01
Give the order type , If standard order use OR or ZOR, which ever is maintained
Then give the sold to and press enter
In the Items screen Give the material and quantity and press enter. This should be enough to create an order, if u need u can give order reasons...etc. Then save the Order. Note down the order number.
Go to VL01N-
and give the above order for which u are doing delivery, In the pick quantity enter the amount in the order and press enter. and make sure the delievry date should be the same in the Sales Order Schedule line- REquested delivery date. Save the document.Note down the document number
Go to VL02N - Open the above delivery document and click on PGI - done
Now go to VF01 and this should bring up the delivery document number., If it doesnt , give the delivery document number and hit enter. then save the document. Billing is done.
Regards
Sai

Incomplete Delivery and billing documents

Hi guys plz tell me
What is the Tcode to find out the incomplete Delivery and billing documents?

Dear Santosh
Incomplete deliveries can be seen by V_UC. There is no incompletion procedure in billing, it can only be blocked for credit or accounting. Release of block can be done by VFX3.
Thanks
Shuktiz

Gross Wight is not gettting copied between Delivery and Billing Document

Hello,
I´m trying to determine freight costs based on data from Delivery document (essentialy weight). Although, when I change manually the "Total weight" in the Delivery screen (which is actually the gross weight, I assume), this new weight is not copied to the billing document.
What am I missing in this one?
Useful answers will be rewarded...
Adriano Cardoso

Hi Adrino,
Please check the copying routines involed between your Delivery document and billing document.
Transaction VTFL
I hope it will help you,
Regards,
Murali.

Delivery and Billing documents

Hi
In transaction OVAZ one can see the Sales organization and the attached sales document type.
Is there a transaction that shows the link between Sales organization and Delivery document type and one for a link between Sales Organization and Billing Documents?
Thx
R

Hello,
I don't think the sales organisation is directly assigned to delivery type and billing type. So there is not transaction to see them.
Prase

Create Outbound Delivery and Billing documents

Hi Experts.!
Please I need your helps... I need create an Outbound Delivery Without Order Reference (similar to the tx vl01no) and a Billing Document (similar to tx vf01).. But I can't found the function or a bapi for it..
Thanks,
Gustavo

I'm trying create a bachinput for my requirement, while I found the correct BAPI or FM.

Stock Transport Order with Delivery and Billing Document/Invoice

Dear Experts,
We have implement the process in our system as required on SAP document:
http://help.sap.com/saphelp_47x200/HELPDATA/EN/4d/2b911d43ad11d189410000e829fbbd/frameset.htm
The problem is that when creation the PO the Shipping tab does not exist in the PO , and no delivery can be created .
We are using NB PO doc type,
Delivery type implemented as NLCC
Please advise where is the problem ?
Regards,
Moshe

>
Moshe Stein wrote:
> Hi Afshad Irani
> Thanks for your prompt reply,
> I have looked to all your pages , but could not find the problem why there is no Shipping Tab?
>
> Moshe
Shipping tab is related to shipping points. You need to maintain shipping points, then shipping points are linked to storage location, and once you enter storage location your shipping point is picked. One of the above links tell you how its done.
T-code OVL2
Path logisitc excution-->shipping>basic shipping function--->assing shipingpoint s
Shipping point
Edited by: Afshad Irani on May 30, 2010 7:44 PM

Copy control problem : Delivery to Billing

Hi Guys,
I am facing a strange problem regarding copy control between delivery and billing document. The case is as below:
When I am creating an F2 Invoice from LF Delivery the header texts from the LF Delivery is getting copied into the header taxt of F2 Invoice but this is not working when I am creating a F8 Proforma Invoice from a LF Delivery. The thing is like this LF-F8 copy control was working fine before couple of days and now it's not at all working. I am bit surprised to see this as these document types are Standard SAP document types !!!
Can anyone advice regarding this particular issue?
Hrishi

Hi,
Check your Copy Control Settings for
Taget Doc.: F8
Source Doc.: LF
in T. Code: VTFL
For Header Settings:
Maintain Field: Copying requirement - 009 - (DlvRel.pro forma hdr)
and Check Box: Copy Item Number
For Item Settings:
Select your Item Category (say, TAN - Standard Item)
Maintain Fields:
Copying requirements   010 DlvRel.pro forma itm
Data VBRK/VBRP         000
Billing quantity     D
Pricing type         G
Hope, this may Help.
Best Regards,
Amit.

Pricing date in delivery document and billing document

Hi All,
Pricing date in billing document can be controlled by copy control between order and billing document. This config is done in the field Pricing source. If i its set as "order", then my pricing date in billing doc will be same as that of order document pricing date. Tell me if i am right???
Where can i maintain the setting for determining the pricing date in delivery document.???

Hi Tushar
Where do you find Pricing date in Delivery and Billing ?
Pricing date is in Sales order, system takes rate of the pricing conditions valid on this date, from their condition record.
Are you talking of Pricing in Billing document, whether it will be copied from sales order, or delivery document etc , Right?
It is controlled from the "Pricing source" field (D- delivery, Blank- order,E - delivery/order etc.) in the copy control table at item level (VTFL).
Suppose, the value is E, that means Pricing data will be copied from order aswell as delivery(if any).
The copied will be copied as it is or Tax will be redermined or Freight will be redetermined etc will be decided from the "Pricing type "field.

Different value in sales order and billing document for one line item

Hi Experts,
User created a sales order with three line items say line item 10, line item 20, line30 and he did the delivery and billing also. Line item 10 value is 5024.26 EUR in Sales order
At the time of billing the value of a line item 10 is increased by 0.02 i.e. 5024.28
I asked the user cancel that invoice and the post goods issue. He cancelled the invoice and post goods issue. Then he created the PGI and billing now the value of line item decrease by 0.01(5024.27) again he cancelled the invoice and post goods issue. he created the post goods issue and billing. Now the value is correct i.e. 5024.26.
User is asking me the reason can any one help me in this
Note: price is copying from delivery to billing

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Difference amount in sales order and billing document (For one line item)

Hi Experts,
User created sales order with 3 line items and billing document. but problem is that there is difference in value of sale order and billing only for line item 10. The remaining items values are same in sales order & billing doc.if I check in sales order condition I found that VPRS condition is used and the value is 692.13and the amount is 3245.26in sales order. But if suppose I check the same value in billing doc the value is 0.69 and the amount is 3245.28. Can u suggest me which configuration I have to check for this.
I also checked change lock but there is no change in sales and billing document & Material
Regards
Sunina agarwal

Morning Sunina
Now consider this scenario
Item a - 10
Item b - 20
Item c - 30
and the validity of condition rec for item C is 31st of Jan
after 31st JAN the record changes or there isn't any.
In Copy control the pricing type is 'B' i.e., carry out new pricing.
Now if the document is created in January it will take all the above prices. and this document is then billed in Feb. Now the copycontrol, whilst copying the prices, will predetermine the same.
Now your task is to check if there was user intervention, check the pricing in order and check what condition types got affected in order and in billing.
If your scenario is still not amongst the above cases...
I don't know what to do, if you figure out please let us also know, god know when we would face the same scenario....
Take care

Control in Delivery and Billing Document

Similar Messages

Maybe you are looking for