Control reason in Movement types.

Hi,
in Inventory Management and Physical Inventory, Movement Types, Record Reason for Goods Movements, Control reason what is the difference between the selection of "." = entry in this field is optional and "blank" = entry in this field is optional ?
The description is the same
Best regards

Hi,
When you enter a goods movement, you can only enter reasons which have
been defined for the movement type here.
The reason for the movement is stored in the material document.
Inventory Management, you can use a report to evaluate the mater
documents for which a reason for movement was specified.
If you want to use the Reason for movement report to determine the
reasons for which materials were returend to the vendor, it is a good
idea to maintain a reason for movement for movement types 122 (return
delivery to vendor) and 124 (return delivery from GR blocked stock)
only.
Thx
Raju

Similar Messages

  • How to post reason code/movement type from MM to FI document?

    Have had a request from our Finance guy here that when a movement is posted in MM (eg a scrapping), the reason code and movement type are to go onto the FI document when the movement is posted to the GL accounts. These values are to be viewed from FBL3N.
    He thinks it might need to be done with substitutions but I have had no experience in this area and he has no idea how to go about it. I have extended the COBL structure using OKX3 which has put the field into BSEG but have no idea how to go about doing the substitution or which exit to use. Inaddition in SAP standard, MSEG passes the movememnt type tyo COBL field BWART but then this seems to get voided.
    Can anyone help me?
    Regards
    Larissa Maryniuk

    Hi Larissa,
    Please go through with this below link. You can easily understand about Substitutions.
    http://techbays.files.wordpress.com/2008/08/sap-tip-how-to-use-substitutions-lakshman-tandra1.pdf
    Best Regards,
    Mohan.

  • Adding update control to new Movement Types

    Hello all;
    I have a requirement to create a movement to allow customer consignment receipt from a finished goods purchase order. So I used OMJJ to copy the 101 movement type to Y01 which seemed to work OK, but I need to make an entry in the section labeled "Update Conrol/WM movement types", I need to add a Y01 W entry for PO receivings for Consignment Customer however I do not see how to add entries from to this area.
    Any help is appreciated.
    Thanks and regards!

    Thanks for your detailed response, I appreciate it. Allow me to give the details as they stand at the moment.
    Considering that I would like to receive a PO into a customer consignment location I needed to utilize a 101 W movement however none exists in the SAP system. So I utilized OMJJ to copy 101 to Y01 (copy all). I then added entries via SM30 to V_156SC_VC and V_156X_VC for Y01 X X W B _ V, this is to allow the Y01 W to be done (I think). And so I create a PO for a finished goods item (type NB) and then go to receive it via MIGO I enter the PO number and the movement type Y01 and I am able to determine a customer partner and receive QTY with serials but when I save it I receive this message.
    NA M7001
    In table T156SY the entry 101 X X W B _ V is missing
    This is curious as I'm positive that the movement type entered in MIGO is Y01. I would assume that there is additional config missing.
    Any help would be appreciated and rewarded.
    Thanks!

  • Movement Type 124

    What would be the Reason Code for movement type 124 ( Returning the material from GR block Stocks).
    Note: i used movement type 103 to receipt material, I was also able to use 104 movement type for return GR block. But I can not do 124 MT, It was asking reason for movement, i used 0002, 0103, not a single one was working
    Edited by: Ehsan1234 on Oct 17, 2011 10:45 PM

    I am adding up....
    124 Return delivery to vendor from GR blocked stock
    Using movement type 124, you can return a goods receipt to GR blocked stock ( 103).
    Movement type 124 has the same effects as movement type 104.
    Due to some reasons like : Poor Quality,Package Damage, Qty Error, Wrong Material, Supporting Document Missed (Inspection sheet)
    So when you return the component you have to mention the reason, so that Vendor can understand what is the rework they have to do.. it will be printed in material document output also,,,
    Now in the config part in OMJJ,,Movement Tyoes
    Go OMJJ t-code. define reason for movement type 124 or remove required entry tick.
    OMJJ-Movement Type-From 124 in the field Control Reason if you maintain as Entry in this field is required- then you have to maintain the reason for the movements,,,
    Reason for the movements can be as per your Business scenarios,,
    Regards,
    Udaya.

  • Info Structure S031 - Information on movement type categories

    How can I find out the movement type categories for the S031 info structure? For instance what movement types add to the "Goods receipt" total or the "Goods issue" total.   Also, how do you "switch off the updating process for specific, individual movements" as mentioned in the SAP documentation below.
    The SAP documentation says:
    "Goods movements are divided into the following types:
    Goods receipt
    Goods issue
    Stock transfer
    Transfer posting
    Inventory differences
    You can switch off the updating process for specific, individual movement types in inventory management or in one of the subsequent applications in the logistics chain."

    Hi Sherry,
    I had similar requirement. You have two options:
    1. Just as you've known you can use the field "Statistically relevant".
    With this indicator, you control whether a movement type is statistically relevant for Inventory Controlling or not.
    In the standard system, all movement types are set in such a way that all material movements for the valuated stock and for the vendor consignment stock are updated.
    2. You can define by statistic group:
    As of Release 3.0C, there is a customer-specific enhancement that enables you to define a maximum of 4 statistics groups for each movement type. The name for the statistics group has four digits and is freely definable. With the help of the statistics group, you can individually update key figures of Inventory Controlling.
    Example: Key figure Consumption and Range of coverage
    In table T156, the movement types are characterized as relevant to consumption. Consumption is correspondingly updated in Inventory Controlling. In the information system, it can be useful for the user to interpret issue quantities (that is actually no consumption) as consumption in order to calculate the range of coverage of the material.
    Example: A material is always transported into another plant by stock transfer. In the issuing plant, no range of coverage can be calculated because the stock removal quantity is not affecting consumption (movement type 351).
    What is to be done in detail?
    a) Maintain table TMCA via Transaction SM31.
    b) Use SAP enhancement MCB10001 for Inventory Controlling.
    Here, you can change the field contents of communication structures MCBEST and MCBEST according to your requirements.
    In the above-mentioned example, the source code in the SAP enhancement would have to be as follows:
    LOOP AT XMCMSEG.
    * Kommunikationsstruktur Bestandscontrolling
    IF XMCMSEG-STGRP1 = '1234'.
    * Statistikgruppe 1234
    * Menge Gesamtverbrauch
    XMCMSEG-MGVBR = XMCMSEG-MENGE.
    MODIFY XMCMSEG.
    ENDIF.
    ENDLOOP.
    Please let me know if this helps you.
    Regards,
    Shawn.

  • MOVEMENT TYPES IN SD

    HI SAP GURUS,
    Movement types used in these activities and also STO ( PLANT TO DEPO), (DEPO TO PLANT )  WIT AND WITHIN  1 COMPANY CODES
    AT  PGI
    AT BILLING
    AT RETURNS
    all possible ways OR any short cuts
    points are to be rewarded for best relevent answer
    thanks in advance

    u can check the same in T-Code OMJJ
    there u can see the controls for each movement type.
    Reward if helps or revert
    Rgds

  • Return Delivery- Move type issue

    Hi frnds
    I have an issue i have not been able to resolve.
    The client wants to scrap the material when receiving the return delivery(LR) on a return order(RE). Initially 657 mov type was asssigned to DN schedule line category in VOV6, so i changed it to 551 but when i ran the return delivery i got error that the update control for this move type does not exist.
    I then copied the mov type 657 in OMJJ and renamed it (999) and in the update control kept the ref mov type as 551 but on running return delivery the stock is still going in the blocked area instead of getting scrapped.
    Does someone have any suggestions for me.... I think i am missing something but am not able to figure it out. I hope i can scrap the material form a return delivery.!!!!
    If i use move type 657(GR-blocked stock) and then use 555(GI-scrap from blocked stock) in Move type step 1 in transaction VOV6, will it work ?????
    Will award points..
    Message was edited by:
            Comes Naturally

    Hi
    The movement type for Return Delivery is 651. Pls make use of this movement type to first post the goods as Returns goods.
    Then using 453 you can post them into unrestricted stock.
    Reward if this helps.

  • Movement type post to COPA or not?

    Dear all,
    Can any one tell me how to control if a movement type posted to COPA or not?
    For example, movement type 201 (GI for cost center) only posted to cost center, movement type 901 (GI scrapping COPA) posting to COPA.
    Actually I want to set one movement type for writeoff that posting to Cost Center and COPA.
    Is it possible? And how?
    Thanks a lot.
    Kevin

    Hi AP,
    Yes, the COPA is active. Actually we already have posting to COPA.
    My question is, material document for some movement types can post to COPA, and for other movement types can post to Cost Center.
    I would like to know how to config the posting to COPA or Cost Center, and is it possible to post to COPA and Cost Center.
    Thanks.

  • 542 movement type copy to new movement type

    Hai Experts,
    I have one issue. As per standard SAP, Material return from sub-contracting vendor will go to unrestricted use only. as per client requirement stock should go to quality so i thought to create new movement type.
    For creating new movement type, i have copied 542 MOVEMENT TYPE.. but there i couldn't be able to put  " Movement Type/Update Control/Inspection Lot Origin " With out this control for that movement type. stock willnot move to quality
    please suggest me how to solve this problem
    answers will be rewarded.

    Hi
    542 movemnt will not allow you to post to inspections stock.
    Even copying the same & creating new one will not help you.
    Better transfer the Stock using movment 322 O in transaction MB1B
    this will transfer the stock from Vendor Unrestricted use to QI stock.
    Now perform the 542 movment this will transfer the Stock into QI stock in the Plant.
    If you need to do this using 542 or a copy of 542 then its not possible as The inspection lot origin for a movement type is defined by SAP and cannot be changed.
    Thanks & Regards
    Kishore

  • QA32 - for 102 -- mvt we want to add Reason for Movement

    Dear all,
    How to add  user defined reason codes ( there r 100 reasons for QC inspection in our case )  while doing QA32 - 102 reverse movement.
    e.g. we have reasons for varience in CO11.

    Dear,
    In OMJJ transaction
    For a given movement type,
    In the Change view - Movement type screen
    Double click on "reason for mov type" option
    here you define the reason for mov type
    Save,
    It will do the job for you.
    And you can do it in SPRO-MMInventory Management-Goods Receipt-Record reason for movent for diffent mvt type..
    Regards,
    R.Brahmankar

  • Movement type configuration

    Dear All,
    Can anybody tell me the significace of each field of
    entry,updation and internal control of a movement type.
    Thanks in advance
    Shuva

    not got

  • MC.A Consumption Movement Types

    Hi,
    Where can I see the movement types which are considered for material consumption value in the report MC.A?
    Is there a way I can exclude some movement types?
    Sincerely,
    Puja

    Consumption posting is controlled through table T156, field KZVBU (consumption posting) and KZSTR (statistics relevance). KZVBU controlled whether a movement type is considered planned or unplanned withdrawal. You can configure these fields through transaction OMJJ and double click on specific movement type.
    Please note that the once you made the configuration change, the rule will be applied on future posting. It will not recalculate existing material document, unless you rebuild the info structure S031.
    Revi

  • Restriction of Selecting Reason for movement based on the movement type

    HI,
    Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
    So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
    But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
    Example:
    Defined the Reason for movements 0001 & 0002 for the movement type 561.
    Defined the Reason for movements 0003 & 0004 for the movement type 563.
    During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
    it needs to be controlled w.r.to the movement type.
    that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
    Is it possible to control, the selection of "reason for movement" based on the movement type ?
    thanks in advance for your help.

    Hi Sundar,
    Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
    Hope this help.
    Regards
    Ankush

  • During MI07 Post Differnce, can we control Movement Type authorisation?

    Dear all
    During the MI07 to post difference during physical inventory, users are asked to choose  the  Movement Type with Reason Code:
    (a) If it is a gain, use the reason code for movement type u2018701u2019.
    (b) If it is a loss, use the reason code for the movement type u2018702u2019.
    However, in the MVT reason code list, there are many many MVT Reason Codes available for users to choose.
    I have checked in PFCF for Tcode: Mi07, there is no authorisation to control MVT.
    How do we do that?
    Please advise as I do not want user to choose from the wrong MVT.
    Thanks for everyone in SDN!!
    Edited by: Daimos on Jul 22, 2009 3:42 AM

    Hello,
    Are you saying that you were able to restrict the pop up for reason codes to show only 701, 702 even thought you had other reason codes maintained for 101 etc ?
    If yes, can you please tell me how you achieved that. Im in a similar situation.
    Thanks

  • Movement type 122 Error while GI" Update control of movement type is incorr

    Hai Gurus,
             I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
    I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
    warm regards.
    mahesh.

    Hi
    Mov type 122 is return to vendor if the qualtiy of Goods  is Poor / Quality
    Regatds
    AKM

Maybe you are looking for