Controlli censura
Ciao,
sul mio MacBook Pro ho 4 account, due dei quali sono protetti dai controlli censura in quanto appartengono a minori; dopo aver aggiornato a Mountain Lion mi sono accorto che, dagli account con restrizine, l'accesso ad alcuni siti (in particolare la homepage di YouTube) non è più possibile: il browser (ho provato sia Safari che Firefox con lo stesso risultato) carica la pagina e mostra una schermata bianca.
Ho già provato ad aggiungere la home di YouTube ai siti consentiti senza sortire alcun effetto; tuttavia, disattivando i controlli della censura, la navigazione non presenta più problemi.
Consultando la console trovo questa segnalazione:
06/09/12 09:09:25,301 ReportCrash[925]:
DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
06/09/12 09:09:25,885 ReportCrash[925]:
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/09/12 09:09:25,885 ReportCrash[925]:
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/09/12 09:09:25,886 ReportCrash[925]:
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/09/12 09:09:25,886 ReportCrash[925]:
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/09/12 09:09:25,886 ReportCrash[925]:
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/09/12 09:09:25,886 ReportCrash[925]:
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/09/12 09:09:25,886 ReportCrash[925]:
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/09/12 09:09:25,886 ReportCrash[925]:
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/09/12 09:09:25,886 ReportCrash[925]:
failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
06/09/12 09:09:25,886 ReportCrash[925]:
LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
06/09/12 09:09:25,973 com.apple.launchd[1]: (com.apple.webcontentfilter.proxy[921]) Job appears to have crashed: Bus error: 10
06/09/12 09:09:26,394 ReportCrash[925]:
com.apple.message.domain: com.apple.crashreporter.writereport.crash
com.apple.message.signature: webfilterproxyd
com.apple.message.signature2: UNBUNDLED ||| 8
com.apple.message.signature3: 1247EC7AC4396F123F850481268B117C
com.apple.message.result: NO
com.apple.message.summarize: YES
Qualche suggerimento su come risolvere il problema?
I have this issue too, it seems to be a serious bug in OS X 10.8.1. I've temporary resolved it turning off parental control.
Similar Messages
-
FaceTime non funziona con Controlli Censura attivi ?
Ciao.
Ho creato un profilo AdHoc per mio figlio ed abilitato i Controlli Censura.
Quando però provo ad utilizzare FaceTime, fa lo squillo ma quando rispondo alla chiamata mi da l'errore "%@FaceTime non riuscito" indipendentemente dal chiamante.
Se invece lo imposto come Utente Standard, funziona ... ma così non è abbastanza sicuro ...
Qualcuno ha una soluzione per poter VideoChiamare mio figlio facendogli però utilizzare un profilo protetto ?
Inoltre, anche se gli abilito OpenOffice o Firefox, non lo trovo tra le sue applicazioni; sembra che controlli solo le applicazioni native Apple ... vero ?
Grazie
AlexI have this issue too, it seems to be a serious bug in OS X 10.8.1. I've temporary resolved it turning off parental control.
-
Unable to capture button event in pageLayout Controller
Hi Guys,
I have the following layout
pageLayout
pageLayoutCO (controller)
----header (Region)
----------messageComponentLayout (Region)
-----------------MessageLovInpurt
-----------------MessageChoice(Item)
-----------------MessageTextInput
-----------------MessageLayout
----------HideShow (Region)
-----------------MessageLovInpurt(Item)
-----------------MessageChoice(Item)
-----------------MessageTextInput(Item)
-----------MessageComponentLayout (Region)
-----------------MessageLayout
------------------------SubmitButton(ID:SearchBtn)
------------------------SubmitButton(ID:ClearBtn, fires partial action named clear)
-----------header(Region)
I am not able to capture the event fired by the button ClearBtn in the controller of the pagelayout.....
The two methods I used as follows aren't worked:
if ("clear".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
if (pageContext.getParameter("ClearBtn") != null) {
what should i do in order to capture the button event in the pageLayout Controller
Thanks in advance
Mandy
Edited by: user8898100 on 2011-8-2 上午7:49Mandy,
Its really strange that its not able to caputure the event in CO.
Below is the way in which we handle to Submit action at CO level.
/Check whether ClearBtn is same in case too.
if(pageContext.getParameter("ClearBtn")!=null){
System.out.println("Inside the Clear Btn Action");
Regards,
Gyan -
How can I use one motion controller to control two robotic independently?
the help document says :
Note Configuring and clearing buffers is a processor-intensive operation on the motion controller that requires the allocation and deallocation of memory. You should configure and clear buffers only when motors are not moving and onboard programs are not running. For example, if you wish to execute three simultaneous contouring operations on axis 1, axis 2, and vector space 1 (with axes 3 and 4), you should first configure all three buffers before starting any of the operations. You can start the contour operations independently, and at different times, but should wait until all operations are complete before clearing any of the buffers.
and i tried to conduct two contouring operation on two vector space. and tried to clear or configuring buffer for one vector when another one is still moving. so that i can start or end the movement at any time i want,and it is ok.no error. but when i tried add a buffer breakpoint output along with each vector movement. the bp doesn't work if the other vector is running . is there anyway to solve this problem.I think you've misunderstood what the dns attribute is for. The dns attribute returns the hostname of the client accessing your website, not the hostname of the website that linked to your website.
For example, when someone using the Comcast ISP goes to a malicious website at example.com that loads images from your website at www.amigoo.net, the dns attribute will be something like "c-1-2-3-4.ca.comcast.net", not "example.com". ACLs are used for authentication and authorization of clients (not the websites those clients chose to visit), and they don't provide the functionality you're looking for.
If I understand correctly, you want to prevent websites other than amigoo.net from linking to files in your d:/webserver/imat/pics_upload directory. You can achieve this adding the following lines to your obj.conf configuration file:
<Object ppath="d:/webserver/imat/pics_upload/*">
<Client referer="*~*amigoo.net">
PathCheck fn="deny-existence"
</Client>
</Object> -
Choosing a PXIe controller for streaming 200 MBps
Warning: This is a long post with several questions. My appologies in advance.
I am a physics professor at a small liberal-arts college, and will be replacing a very old multi-channel analyzer for doing basic gamma-ray spectroscopy. I would like to get a complete PXI system for maximum flexability. Hopefully this configuration could be used for a lot of other experiments such as pulsed NMR. But the most demanding role of the equipment would be gamma-ray spectroscopy, so I'll focus on that.
For this, I will need to be measuring either the maximum height of an electrical pulse, or (more often) the integrated voltage of the pulse. Pulses are typically 500 ns wide (at half maximum), and between roughly 2-200 mV without a preamp and up to 10V after the preamp. With the PXI-5122 I don't think I'll need a preamp (better timing information and simpler pedagogy). A 100 MHz sampling rate would give me at least 50 samples over the main portion of the peak, and about 300 samples over the entire range of integration. This should be plenty if not a bit of overkill.
My main questions are related to finding a long-term solution, and keeping up with the high data rate. I'm mostly convinced that I want the NI PXIe-5122 digitizer board, and the cheapest (8-slot) PXIe chassis. But I don't know what controller to use, or software environment (LabView / LabWindows / homebrew C++). This system will likely run about $15,000, which is more than my department's yearly budget. I have special funds to accomplish this now, but I want to minimize any future expenses in maintenance and updates.
The pulses to be measured arrive at random intervals, so performance will be best when I can still measure the heights or areas of pulses arriving in short succession. Obviously if two pulses overlap, I have to get clever and probably ignore them both. But I want to minimize dead time - the time after one pulse arrives that I become receptive to the next one. Dead times of less than 2 or 3 microseconds would be nice.
I can imagine two general approaches. One is to trigger on a pulse and have about a 3 us (or longer) readout window. There could be a little bit of pileup inspection to tell if I happen to be seeing the beginning of a second pulse after the one responsible for the trigger. Then I probably have to wait for some kind of re-arming time of the digitizer before it's ready to trigger on another pulse. Hopefully this time is short, 1 or 2 us. Is it? I don't see this in the spec sheet unless it's equivalent to minimum holdoff (2 us). For experiments with low rates of pulses, this seems like the easiest approach.
The other possibility is to stream data to the host computer, and somehow process the data as it rolls in. For high rate experiments, this would be a better mode of operation if the computer can keep up. For several minutes of continuous data collection, I cannot rely on buffering the entire sample in memory. I could stream to a RAID, but it's too expensive and I want to get feedback in real time as pulses are collected.
With this in mind, what would you recommend for a controller? The three choices that seem most reasonable to me are getting an embedded controller running Windows (or Linux?), an embedded controller running Labview real-time OS, or a fast interface card like the PCIe8371 and a powerful desktop PC. If all options are workable, which one would give me the lowest cost of upgrades over the next decade or so? I like the idea of a real-time embedded controller because I believe any run-of-the-mill desktop PC (whatever IT gives us) could connect and run the user interface including data display and higher-level analysis. Is that correct? But I am unsure of the life-span of an embedded controller, and am a little wary of the increased cost and need for periodic updates. How are real-time OS upgrades handled? Are they necessary? Real-time sounds nice and all that, but in reality I do not need to process the data stream in a real-time environment. It's just the computer and the digitizer board (not a control system), and both should buffer data very nicely. Is there a raw performance difference between the two OSes available for embedded controllers?
As for live processing of the streaming data, is this even possible? I'm not thinking very precisely about this (would really have to just try and find out), but it seems like it could possibly work on a a 2 GHz dual-core system. It would have to handle 200 MBps, but the data processing is extremely simple. For example one thread could mark the beginnings and ends of pulses, and do simple pile-up inspection. Another thread could integrate the pulses (no curve fitting or interpolation necessary, just simple addition) and store results in a table or list. Naievely, I'd have not quite 20 clock cycles per sample. It would be tight. Maybe just getting the data into the CPU cache is prohibitively slow. I'm not really even knowledgeable enough to make a reasonable guess. If it were possible, I would imagine that I would need to code it in LabWindows CVI and not LabView. That's not a big problem, but does anyone else have a good read on this? I have experience with C/C++, and some with LabView, but not LabWindows (yet).
What are my options if this system doesn't work out? The return policy is somewhat unfriendly, as 30 days may pass quickly as I struggle with the system while teaching full time. I'll have some student help and eventually a few long days over the summer. An alternative system could be built around XIA's Pixie-4 digitizer, which should mostly just work out of the box. I prefer somewhat the NI PXI-5122 solution because it's cheaper, better performance, has much more flexability, and suffers less from vendor lock-in. XIA's software is proprietary and very costly. If support ends or XIA gets bought out, I could be left with yet another legacy system. Bad.
The Pixie-4 does the peak detection and integration in hardware (FPGAs I think) so computing requirements are minimal. But again I prefer the flexibility of the NI digitizers. I would, however, be very interested if data from something as fast as the 5122 could be streamed into an FPGA-based DSP module. I haven't been able to find such a module yet. Any suggestions?
Otherwise, am I on the right track in general on this kind of system, or badly mistaken about some issue? Just want some reassurance before taking the plunge.drnikitin,
The reason you did not find the spec for the rearm time for
the 5133 is because the USB-5133 is not capable of multi-record acquisition. The rearm time is a spec for the reference
trigger, and that trigger is used when fetching the next record. So every time you want to do another fetch
you will have to stop and restart your task.
To grab a lot of data increase your minimum record size. Keep in mind that you have 4MB of on board
memory per channel.
Since you will only be able to fetch 1 record at a time,
there really isn’t a way to use streaming.
When you call fetch, it will transfer the amount of data you specify to
PC memory through the USB port (up to 12 MB/s for USB 2.0 – Idealy).
Topher C,
We do have a Digitizer that has onboard signal processing
(OSP), which would be quicker than performing post processing. It is
the NI 5142
and can perform the following signal
processing functions. It is
essentially a 5122 but with built in OSP.
It may be a little out of your price range, but it may be worth a
look.
For more
information on streaming take a look at these two links (if you havn’t
already).
High-Speed
Data Streaming: Programming and Benchmarks
Streaming Options for PXI
Express
When dealing with different LabVIEW versions
it is important to note that previous versions will be compatible with new
versions; such as going from 8.0 to 8.5.
Keep in mind that if you go too far back then LabVIEW may complain, but
you still may be able to run your VI. If
you have a newer version going to an older version then we do have options in
LabVIEW to save your VI for older versions.
It’s usually just 1 version back, but in LabVIEW 8.5 you can save for
LabVIEW 8.2 and 8.0.
ESD,
Here is the link
I was referring to earlier about DMA transfers. DMA is actually done every time you call a
fetch or read function in LabVIEW or CVI (through NI-SCOPE).
Topher C and ESD,
LabVIEW is a combination of a compiled
language and an interpreted language.
Whenever you make a change to the block diagram LabVIEW compiles
itself. This way when you hit run, it is
ready to execute. During execution LabVIEW
uses the run-time engine to reference shared libraries (such as dll’s). Take a look at this DevZone article about
how LabVIEW compiles it’s block diagram (user code).
I hope all of this information helps!
Ryan N
National Instruments
Application Engineer
ni.com/support -
Sorry if my attempt to be thorough in my description may result in excessive and unnecessary information.
I'm running into some problems with a single server running WS 2012 R2 as a domain controller (AD and DNS) and I’m trying to figure out what the cause is.
The network has ~10 computers on it connected through a cable business gateway (running DHCP) which feeds 2 switches and a wireless router acting as a switch. (I also turned on remote services, but the end users aren’t using that until I get certificates
setup.)
For 6+ months everyone had access to the shared files and databases on each workstation without issue.
In the last month users would occasionally have to re-enter their credentials to get access to shared server folders despite being on a domain account already.
Last week one of the computers intermittently cannot gain access to the shared folders– entering the correct credentials just results in the credentials being requested again and again: There’s an error icon at the bottom saying that “there are currently
no logon servers available to service the logon request”. While access is rejected I’m still able to ping the DC both via its name and IPV4 address.
(Pinging via its name results in an IPv6 address in the response.)
Other network connectivity appears intact (able to browse the web, perform network discovery.)
Things that ‘seem’ to allow access on this computer until the next failure:
Entering a different domain username and password into the windows credentials request has allowed access a couple of times.
Disconnecting and reconnecting the network cable allowed the original username to be used to log on (at least once.)
After removing it from and then rejoining it to the domain (a few hours ago) it experienced the problem once more. Also, logging on with domain credentials created a TEMP user folder instead of the folder with the domain username.
Looking at the event logs, I notice there are quite a few warnings and errors reported regarding DC access on many of the computers; maybe this is normal?
Most Problematic Computer:
Event ID 8016: System failed to register host A or AAAA resource records. (With an unknown Ipv6 and the server’s ipv4 address in the DNS server list.)
Event ID 131: NtpClient unable to set a domain peer to use as a time source because of DNS resolution error on ‘Server.domain.local’
‘No such host is known.”
Event ID 5719: NETLOGON. This computer was not able to setup a secure session with a domain controller in the domain due …..: there are currently no logon servers available to service the logon request.
And then pairs of: Event 1500: The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. & Event 1054:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
Event 1030: The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation
at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
On the server I’ve run DCDIAG and DCDIAG /test:DNS and those all appeared to pass.
Ipconfig/all from the server:
Connection-specific DNS Suffix
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-LM
Physical Address. . . . . . . . . : FC-4D-D4-F2-A1-83
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2601:8:a182:1100:b155:a0b0:892d:9ed5(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::b155:a0b0:892d:9ed5%13(Preferred)
IPv4 Address. . . . . . . . . . . : 10.1.10.42(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::abd:43ff:fe9a:ab47%13
10.1.10.1
DHCPv6 IAID . . . . . . . . . . . : 234638804
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-3F-7D-B9-68-05-CA-24-31-C4
DNS Servers . . . . . . . . . . . : ::1
127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ipconfig/all from the problematic computer:
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix
. : wp.comcast.net
Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 6150
Physical Address. . . . . . . . . : 40-25-C2-63-C2-B8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2601:8:a182:1100:8f5:1606:d0a8:6b25(Prefe
rred)
Temporary IPv6 Address. . . . . . : 2601:8:a182:1100:283e:f9e8:4841:6c50(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::8f5:1606:d0a8:6b25%3(Preferred)
IPv4 Address. . . . . . . . . . . : 10.1.10.31(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Tuesday, March 10, 2015 9:19:02 AM
Lease Expires . . . . . . . . . . : Tuesday, March 17, 2015 1:23:15 PM
Default Gateway . . . . . . . . . : fe80::abd:43ff:fe9a:ab47%3
10.1.10.1
DHCP Server . . . . . . . . . . . : 10.1.10.1
DHCPv6 IAID . . . . . . . . . . . : 54535618
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-6B-AA-F0-DE-F1-9C-07-D4
DNS Servers . . . . . . . . . . . : 2001:558:feed::1
2001:558:feed::2
10.1.10.42
NetBIOS over Tcpip. . . . . . . . : Enabled
Any thoughts? I was assuming it was a Domain Controller/DNS error, but I don't know where to check next. Could a failing piece of hardware be the culprit?
Thanks,
-JTHi,
According to the error you have posted.
A Netlogon 5719 event indicates that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against.
Most of the time this is caused by network issues or name resolution (DNS/WINS) issues, you could refer to:
Netlogon 5719 and the Disappearing Domain [Controller]
http://blogs.technet.com/b/instan/archive/2008/09/18/netlogon-5719-and-the-disappearing-domain.aspx
Did you refer to this KB article?
Event ID 5719 is logged when you start a Domain Member
http://support.microsoft.com/kb/938449
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hard drive array losing access - suspect controller - zfs
i am having a problem with one of my arrays, this is a zfs fielsystem. It consists of a 1x500GB, 2x750GB, and 1x2TB, linear array. the pool is named 'pool'. I have to mention here, i dont have enough hard drive to have a raidz (raid5) setup yet, so there is no actual redundancy to so the zfs cant auto repair itself from a copy because there is none, therefore all auto repair features can be thrown out the door in this equation meaning i believe its possible that the filesystem can easily be corrupted by the controller in this specific case which i suspect. Please keep that in mind while reading the following.
I just upgraded my binaries, therefore i removed zfs-fuse and installed archzfs. did i remove it completely? not sure. i wasnt able to get my array back up and running until i fiddled with the sata cables, moved around the sata connectors, tinkered with bios drive detect. after i got it running, i copied some files off of it from samba thinking it might not last long. the copy was succesfull, but problems began surfacing again shortly after. so now i suspect i have a bad controller on my gigabyte board. I round recently someone else who had this issue so im thinking its not the hard drive.
I did some smartmontools tests last night and found that ll drives are showing good on a short test, they all passed. today im not having so much luck with getting access. there is hangs on reboot, and the drive light stays on. when i try to run zfs and zpool commands its stating the system is hanging. i have been getting what appears as HD errors as well, ill have to manually type them in here since no copy and paste from the console to the maching im posting from, and the errors arent showing up via ssh or i would copy them from my terminal tha ti currently have open to here.
ata7: SRST failed (errno=-16)
reset failed, giving up,
end_request I/O error, dev sdc, sector 637543760
' ' ' ' '''' ' ' ''' sector 637543833
sd 6:0:0:0 got wrong page
' ' ' ' ' '' asking for cache data failed
' ' ' ' ' ' assuming drive cache: write through
info task txg_sync:348 blocked for more than 120 seconds
and so forth, and when i boot i see this each time which is making me feel that the HD is going bad, however i still want to believe its the controller.
Note, it seems only those two sectors show up, is it possible that the controller shot out those two sectors with bad data? {Note, i have had a windows system prior installed on this motherboard and after a few months of running lost a couple raid arrays of data as well.}
failed command: WRITE DMA EXT
... more stuff here...
ata7.00 error DRDY ERR
ICRC ABRT
blah blah blah.
so now i can give you some info from the diagnosis that im doing on it, copied from a shell terminal. Note the following metadata errors JUST appeared after i was trying to delete some files, copying didnt cause this, so it apears either something is currently degrading, or it just inevitably happened from a bad controller
[root@falcon wolfdogg]# zpool status -v
pool: pool
state: ONLINE
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
see: http://zfsonlinux.org/msg/ZFS-8000-HC
scan: resilvered 33K in 0h0m with 0 errors on Sun Jul 21 03:52:53 2013
config:
NAME STATE READ WRITE CKSUM
pool ONLINE 0 26 0
ata-ST2000DM001-9YN164_W1E07E0G ONLINE 6 41 0
ata-ST3750640AS_5QD03NB9 ONLINE 0 0 0
ata-ST3750640AS_3QD0AD6E ONLINE 0 0 0
ata-WDC_WD5000AADS-00S9B0_WD-WCAV93917591 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
<metadata>:<0x0>
<metadata>:<0x1>
<metadata>:<0x14>
<metadata>:<0x15>
<metadata>:<0x16d>
<metadata>:<0x171>
<metadata>:<0x277>
<metadata>:<0x179>
if one of the devices are faulted, then why are they all 4 stating online???
[root@falcon dev]# smartctl -a /dev/sdc
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.9.9-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: /6:0:0:0
Product:
User Capacity: 600,332,565,813,390,450 bytes [600 PB]
Logical block size: 774843950 bytes
scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46
scsiModePageOffset: response length too short, resp_len=47 offset=50 bd_len=46
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
my drive list
[root@falcon wolfdogg]# ls -lah /dev/disk/by-id/
total 0
drwxr-xr-x 2 root root 280 Jul 21 03:52 .
drwxr-xr-x 4 root root 80 Jul 21 03:52 ..
lrwxrwxrwx 1 root root 9 Jul 21 03:52 ata-_NEC_DVD_RW_ND-2510A -> ../../sr0
lrwxrwxrwx 1 root root 9 Jul 21 03:52 ata-ST2000DM001-9YN164_W1E07E0G -> ../../sdc
lrwxrwxrwx 1 root root 9 Jul 21 03:52 ata-ST3250823AS_5ND0MS6K -> ../../sdb
lrwxrwxrwx 1 root root 10 Jul 21 03:52 ata-ST3250823AS_5ND0MS6K-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jul 21 03:52 ata-ST3250823AS_5ND0MS6K-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jul 21 03:52 ata-ST3250823AS_5ND0MS6K-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jul 21 03:52 ata-ST3250823AS_5ND0MS6K-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 9 Jul 21 03:52 ata-ST3750640AS_3QD0AD6E -> ../../sde
lrwxrwxrwx 1 root root 9 Jul 21 03:52 ata-ST3750640AS_5QD03NB9 -> ../../sdd
lrwxrwxrwx 1 root root 9 Jul 21 03:52 ata-WDC_WD5000AADS-00S9B0_WD-WCAV93917591 -> ../../sda
lrwxrwxrwx 1 root root 9 Jul 21 03:52 wwn-0x5000c50045406de0 -> ../../sdc
lrwxrwxrwx 1 root root 9 Jul 21 03:52 wwn-0x50014ee1ad3cc907 -> ../../sda
and this one i dont get
[root@falcon dev]# zfs list
no datasets available
i remember creating a dataset last year, why is it reporting none, but still working
is anybody seeing any patterns here? im prepared to destroy the pool and recreate it just to see if its bad data.But what im thinking to do now is since the problem appears to only be happening on the 2TB drive, either the controller just cant handle it, or the drive is bad. So, to rule out the controller there might be hope. I have a scsi card (pci to sata) connected that one of the drives in the array is connected to since i only have 4 sata slots on the mobo, and i keep the 500GB connected to there and have not yet tried the 2tb there yet. So if i connect this 2TB drive to the scsi i should see the problems disappear, unless the drive got corrupted already.
Does any experience in the arch forums know whats going on here? did i mess up by not completely removing zfs-fuse, is my HD going bad, is my controller bad, or did ZFS just get misconfigured?
Last edited by wolfdogg (2013-07-21 19:38:51)ok, something interesting happened when i connected it (the badly reacting 2TB drive) to the scsi pci card. first of all no errors on boot.... then take a look at this, some clues to some remanants to the older zfs-fuse setup, and a working pool.
[root@falcon wolfdogg]# zfs list
NAME USED AVAIL REFER MOUNTPOINT
pool 2.95T 636G 23K /pool
pool/backup 2.95T 636G 3.49G /backup
pool/backup/falcon 27.0G 636G 27.0G /backup/falcon
pool/backup/redtail 2.92T 636G 2.92T /backup/redtail
[root@falcon wolfdogg]# zpool status
pool: pool
state: ONLINE
status: The pool is formatted using a legacy on-disk format. The pool can
still be used, but some features are unavailable.
action: Upgrade the pool using 'zpool upgrade'. Once this is done, the
pool will no longer be accessible on software that does not support
feature flags.
scan: resilvered 33K in 0h0m with 0 errors on Sun Jul 21 04:52:52 2013
config:
NAME STATE READ WRITE CKSUM
pool ONLINE 0 0 0
ata-ST2000DM001-9YN164_W1E07E0G ONLINE 0 0 0
ata-ST3750640AS_5QD03NB9 ONLINE 0 0 0
ata-ST3750640AS_3QD0AD6E ONLINE 0 0 0
ata-WDC_WD5000AADS-00S9B0_WD-WCAV93917591 ONLINE 0 0 0
errors: No known data errors
am i looking at a bios update needed here so the controller can talk to the 2TB properly?
Last edited by wolfdogg (2013-07-21 19:50:18) -
Convert PXIe-8135 controller to dual-boot Windows 7 and LabVIEW RT
Hello. I have a PXIe-8135 controller that originally was just running Windows 7. We are trying to convert it to a dual boot system to also run LabView Real Time. (There is host computer that will run LabVIEW 2014 with the RT module, and the controller will become a target).
I have created a FAT32 partition on the hard drive of the controller. Now, I’m trying to install the real-time OS with a USB flash drive made using the MAX utility, but I cannot boot using the USB drive for some reason. I keep getting the message “waiting for USB device to initialize”.
In BIOS, legacy USB support is [ENABLED] and boot configuration is set to [Windows/other OS]. I’ve tried removing the drive, waiting, and reinserting. I’ve tried two different USB drives (both 8 GB, different brands).
I’m not sure what to do next. Apart from the USB boot issue, is converting the PXIe-8135 even possible? I read about SATA/PATA hard drive issues with older controllers, but I don't know about this one.
Thanks, in advance, for your help!
-Jeff
Solved!
Go to Solution.Per Siana's licensing comment, more information on purchasing a deployment license if you do not have one for this target can be found here.
The RT Utility USB key is used to set up non-NI hardware with LabVIEW Real-Time, but you should not need it in this situation to convert to dual-boot (*). Try this:
1. Since you already have a FAT32 partion created, go into BIOS setup and change to booting 'LabVIEW RT'.
2. The system will attempt to boot LabVIEW RT, see that the partition is empty, and switch over into LabVIEW RT Safe Mode. (this safemode is built into the firmware, which is why you don't really need the USB key).
3. The system should come up correctly and be detectable from MAX, and you can proceed with installing software.
4. To switch back to Windows, go back to BIOS setup and choose 'Windows/Other OS'
(*) One area where the USB key is helpful on a dual boot system is with formatting the disk. If you want to convert from FAT32 to Reliance on the partition designated for LabVIEW RT, the USB key lets you attempt to format a single parition and leave the rest of the disk untouched. If you format from MAX, the standard behavior is to format only one RT partition if found, but if not found, it will format the entire disk. Formatting from MAX on a dual boot system is consequently riskier and you could lose your Windows partition. -
Error in starting domain controller !
I have installed on Windows 2000, Oracle 9i Database 9.0.1 and Oracle 9iFS release 9.0.1.
Configuration was OK, but the domain doesn't start.
I launch 'ifslaunchdc.bat', 'ifslaunchnode.bat', and when I launch 'ifsstartdomain.bat', I receive this error:
"An exception occurred while starting Domain controller - oracle.ifs.common.IfsException: IFS-40066: Remothed method threw exception java.lang.NoSuchFieldError: OCIEnvHandle"
OTHER WAY:
If I try in Oracle Management Server (from Oracle Enterprise Management Console), I go to Internet File Systems, I go to the domain picasso:53140 and it is launched (yellow light). I do right click and I choose 'Start Domain'. I receive the following message:
" The Domain Controller 'picasso:53140' is launched
Command failed:
IFS-40066: Remothed method threw exception java.lang.NoSuchFieldError: OCIEnvHandle"
So, the same error, and I don't find anywhere this exception !
What should be done? Thanks, JeaninaI am not sure how you got into this state, but to clear it up you can edit the boot.properties file to enter (clear text) the username and password for the server (entered when running the Configuration Wizard).
The boot.properties file is located in your domain at:
<domain root>/servers/AdminServer/security
Just enter the username and password in the file:
username=myUserName
password=myPassword
WebLogic Server will boot up using these values and immediately encrypt the username and password in the file.
An alternate approach would be to delete boot.properties in which case WLS will prompt you for the id/pw each time it is started/stopped.
Brad -
SAP Server Manager Error after BPC installation on domain controller
Hi, I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . I think that the application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users).
ThanksHi
I have the same issue that you had.
"I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . The application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users)."
Can you please let me know how you solved this ?
thanks & regards
Lokesh -
Config air-lap1041n-e-k9 with cisco 5500 (5508) series wireless controller. how to?
Hi!
I try to configure a Cisco 5508 Wireless controller and 25 Air-lap1041 to use as VoIP and data. I read documents, manuals, etc, but the AP doesn't charge the configuration, or not conect with the Wireless Controller, why? No Radius server present, only WPA security.howto, please...
I try to put a static ip in the LAP, with lwapp or capwap command, (LWAPP/CAPWAP ap ip address direccion mascara) and the AP returns "You should configure Domain and Name Server from controller CLI/GUI." and i can't change the name of the AP (Command is disabled).
Log from AP:
using ÿÿÿÿ ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x83000800, 0xc0000000
RQDC, RFDC : 0x80000037, 0x00000184
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is NOT up.
PCIE1 port 1 not initialize
PCIEx: initialization done
flashfs[0]: 6 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 2369024
flashfs[0]: Bytes available: 30016000
flashfs[0]: flashfs fsck took 21 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:2b:03:dc:09:25
Ethernet speed is 1000 Mb - FULL duplex
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...###########################
File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entr
y point: 0x4000
executing...
enet halted
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
SE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:53 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
flashfs[1]: 6 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32126976
flashfs[1]: Bytes used: 2369024
flashfs[1]: Bytes available: 29757952
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Ethernet speed is 1000 Mb - FULL duplex
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1041N-E-K9 (PowerPC405ex) processor (revision B0) with 98294K/32
768K bytes of memory.
Processor board ID FCZ1611W414
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from reload
LWAPP image version 7.0.94.21
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:2B:03:DC:09:25
Part Number : 73-14034-04
PCA Assembly Number : 800-34273-05
PCA Revision Number : A0
PCB Serial Number : FOC16075VZ3
Top Assembly Part Number : 800-34284-03
Top Assembly Serial Number : FCZ1611W414
Top Revision Number : A0
Product/Model Number : AIR-LAP1041N-E-K9
% Please define a domain-name first.
Press RETURN to get started!
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:09.574: *** CRASH_LOG = YES
Base Ethernet MAC address: 44:2B:03:DC:09:25
*Mar 1 00:00:09.838: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 1024 messages)
*Mar 1 00:00:11.848: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar 1 00:00:11.892: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
SE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:53 by prod_rel_team
*Mar 1 00:08:16.954: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
logging facility kern
^
% Invalid input detected at '^' marker.
*Mar 1 00:08:28.047: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 00:08:28.049: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:09:08.282: %CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASS
IC_NO_INJECTOR_CONFIGURED AIR-CT5508-K9 (c464.138f.9345)
*Mar 1 00:09:08.282: -Verify the required power-injector is installed on this
port: AIR-CT5508-K9(Gig 0/0/2).
*Mar 1 00:09:08.282: -If a power-injector is installed, issue the command:"pow
er inline negotiation injector installed"
*Mar 1 00:12:19.976: %CAPWAP-5-STATIC_TO_DHCP_IP: Could not discover WLC using
static IP. Forcing AP to use DHCP.
*Mar 1 00:12:29.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:39.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:49.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:59.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:13:09.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
Not in Bound state.
*Mar 1 00:13:19.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:13:19.993: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
logs from wireless controller:
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Gu
est
ap-manager 2 untagged 209.165.200.231 Dynamic Yes No
management 1 untagged 209.165.200.230 Static Yes No
service-port N/A N/A 192.168.1.157 Static No No
virtual N/A N/A 1.1.1.1 Static No No
(Cisco Controller) >
i conect with service-port ok and the management port works, i think.
AP442b.03dc.0925>ping 209.165.200.230
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 209.165.200.230, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
AP442b.03dc.0925>
Help, please!
i write in spanish:
Hola:
Tengo que configurar un cisco 5508 wireless controller con 25 air-lap1041n, para usarlo como acceso de datos y voz. ¿Cómo lo hago? He leído manuales, y seguido las instrucciones, pero el punto de acceso parace que no es capaz de cargar el perfil. No hay servidor radius, solo la configuración de una clave wpa. Alguién me puede indicar pasos, GraciasHi!
I buy a gigabit switch. I connect the service-port to gigabit switch, and laptop to gigabit switch. I used 192.168.1.x ip address (192.168.1.157 to service-port and 192.168.1.233 to wired port on laptop, well, the laptop has two ip adress, 192.168.1.233 and 209.165.200.2, and the laptop works ok. Ping to 209.165.200.230 -ip address of management interface- and ping to 209.165.200.203 -ip address for AP, is assigned by DHCP of WLC. And i connect the ap to gigabit switch, and the wlc assigns well an ip direction.
I post the run-config and sysinfo log. The gigabit switch is tp-link model tl-sg1005d, no configuration.
Before the logs, I see this message from AP:
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
Hola:
He comprado un switch gigabit. Conecto el service-port al switch gigabit y el portátil también (por cable). Uso como direcciones ip el rango 192.168.1.x (192.168.1.157 asignado al service-port y 192, 168.1.233 al portátil, bueno, el portátil tiene dos direcciones, la dicha anteriormente y la 209.165.200.2) El portátil funciona bien, hace ping al 209.165.200.230 - la ip de la management interface, y a 209.165.200.203 - ip asignada al AP por el DHCP del WLC. He conectado el AP al swtich gigabit, y el dhcp del wlc asigna correctamente una dirección ip.
Añado a continuación los resultados de los comandos "show run-config" y "show sysinfo". El switch es un TP-LINK modelo TL-S1005D, sin necesidad de configuración.
Antes de mostrar los resultados de los comandos, he visto el siguiente mensaje en el log del AP:
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
Un saludo
Antonio R.
(Cisco Controller) >show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco Wireless Controller"
PID: AIR-CT5508-K9, VID: V02, SN: FCW1608L05X
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.4
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
1.27
Build Type....................................... DATA + WPS
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 209.165.200.230
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 17 mins 45 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
Rome, Vienna
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... ES - Spain
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Network Information
RF-Network Name............................. hosp
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 0
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location
Port Country Priority
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Location
Site Name........................................ default-group
Site Description.................................
WLAN ID Interface Network Admission Control
1 management Disabled
AP Name Slots AP Model Ethernet MAC Location
Port Country Priority GroupName
Press Enter to continue or to abort
AP Config
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Airewave Director Configuration
Press Enter to continue or to abort
802.11a Configuration
802.11a Network.................................. Disabled
11nSupport....................................... Enabled
802.11a Low Band........................... Enabled
802.11a Mid Band........................... Enabled
802.11a High Band.......................... Enabled
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
MCS 5........................................ Supported
MCS 6........................................ Supported
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Fragmentation Threshold.......................... 2346
TI Threshold..................................... -50
Legacy Tx Beamforming setting.................... Disabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admision Control (CAC) configuration
Voice AC:
Voice AC - Admission control (ACM)............ Disabled
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Video AC:
Video AC - Admission control (ACM)............ Disabled
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
Video max RF bandwidth........................ Infinite
Video reserved roaming bandwidth.............. 0
Press Enter to continue or to abort
802.11a Advanced Configuration
Press Enter to continue or to abort
802.11a Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
TxPower Update Logging......................... Off
Default 802.11a AP performance profiles
802.11a Global Interference threshold.......... 10 %
802.11a Global noise threshold................. -70 dBm
802.11a Global RF utilization threshold........ 80 %
802.11a Global throughput threshold............ 1000000 bps
802.11a Global clients threshold............... 12 clients
Default 802.11a AP monitoring
802.11a Monitor Mode........................... enable
802.11a Monitor Mode for Mesh AP Backhaul...... disable
802.11a Monitor Channels....................... Country channels
802.11a AP Coverage Interval................... 180 seconds
802.11a AP Load Interval....................... 60 seconds
802.11a AP Noise Interval...................... 180 seconds
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
802.11a AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -10 dBm
Max Transmit Power............................. 30 dBm
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... c4:64:13:8f:93:40
Last Run....................................... 75 seconds ago
Coverage Hole Detection
802.11a Coverage Hole Detection Mode........... Enabled
802.11a Coverage Voice Packet Count............ 100 packets
802.11a Coverage Voice Packet Percentage....... 50%
802.11a Coverage Voice RSSI Threshold.......... -80 dBm
802.11a Coverage Data Packet Count............. 50 packets
802.11a Coverage Data Packet Percentage........ 50%
802.11a Coverage Data RSSI Threshold........... -80 dBm
802.11a Global coverage exception level........ 25 %
802.11a Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
--More or (q)uit current module or to abort
Channel Update Interval........................ 600 seconds [startup]
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... c4:64:13:8f:93:40
Last Run....................................... 75 seconds ago
DCA Sensitivity Level.......................... STARTUP (5 dB)
DCA 802.11n Channel Width...................... 20 MHz
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11a 5 GHz Auto-RF Channel List
Allowed Channel List......................... 36,40,44,48,52,56,60,64
Unused Channel List.......................... 100,104,108,112,116,120,124,
128,132,136,140
DCA Outdoor AP option.......................... Disabled
Radio RF Grouping
802.11a Group Mode............................. AUTO
--More or (q)uit current module or to abort
802.11a Group Update Interval.................. 600 seconds
802.11a Group Leader........................... c4:64:13:8f:93:40
802.11a Group Member......................... c4:64:13:8f:93:40
802.11a Last Run............................... 75 seconds ago
802.11b Configuration
802.11b Network.................................. Enabled
11gSupport....................................... Enabled
11nSupport....................................... Enabled
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Mandatory
802.11b/g 2M Rate............................ Mandatory
802.11b/g 5.5M Rate.......................... Mandatory
802.11b/g 11M Rate........................... Mandatory
802.11g 6M Rate.............................. Supported
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Supported
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
--More or (q)uit current module or to abort
MCS 5........................................ Supported
MCS 6........................................ Supported
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Beacon Interval.................................. 100
CF Pollable mode................................. Disabled
--More or (q)uit current module or to abort
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 1
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Call Admission Limit ........................... 105
G711 CU Quantum ................................. 15
ED Threshold..................................... -50
Fragmentation Threshold.......................... 2346
PBCC mandatory................................... Disabled
RTS Threshold.................................... 2347
Short Preamble mandatory......................... Enabled
Short Retry Limit................................ 7
Legacy Tx Beamforming setting.................... Enabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
Faster Carrier Tracking Loop..................... Disabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admision Control (CAC) configuration
Voice AC - Admission control (ACM)............ Disabled
--More or (q)uit current module or to abort
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Video AC - Admission control (ACM)............ Disabled
Video max RF bandwidth........................ 50
Video reserved roaming bandwidth.............. 0
802.11b Advanced Configuration
Press Enter to continue or to abort
802.11b Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
Transmit Power Update Logging.................. Off
Default 802.11b AP performance profiles
802.11b Global Interference threshold.......... 10 %
802.11b Global noise threshold................. -70 dBm
802.11b Global RF utilization threshold........ 80 %
802.11b Global throughput threshold............ 1000000 bps
802.11b Global clients threshold............... 12 clients
Default 802.11b AP monitoring
802.11b Monitor Mode........................... enable
802.11b Monitor Channels....................... Country channels
802.11b AP Coverage Interval................... 180 seconds
802.11b AP Load Interval....................... 60 seconds
802.11b AP Noise Interval...................... 180 seconds
802.11b AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -10 dBm
Max Transmit Power............................. 30 dBm
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... c4:64:13:8f:93:40
Last Run....................................... 213 seconds ago
Coverage Hole Detection
802.11b Coverage Hole Detection Mode........... Enabled
802.11b Coverage Voice Packet Count............ 100 packets
802.11b Coverage Voice Packet Percentage....... 50%
802.11b Coverage Voice RSSI Threshold.......... -80 dBm
802.11b Coverage Data Packet Count............. 50 packets
802.11b Coverage Data Packet Percentage........ 50%
802.11b Coverage Data RSSI Threshold........... -80 dBm
802.11b Global coverage exception level........ 25 %
802.11b Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 600 seconds [startup]
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... c4:64:13:8f:93:40
Last Run....................................... 213 seconds ago
DCA Sensitivity Level: ...................... STARTUP (5 dB)
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11b Auto-RF Allowed Channel List........... 1,6,11
Auto-RF Unused Channel List.................... 2,3,4,5,7,8,9,10,12,13
Radio RF Grouping
802.11b Group Mode............................. AUTO
802.11b Group Update Interval.................. 600 seconds
802.11b Group Leader........................... c4:64:13:8f:93:40
802.11b Group Member......................... c4:64:13:8f:93:40
802.11b Last Run............................... 213 seconds ago
Mobility Configuration
Symmetric Mobility Tunneling (current) .......... Enabled
Symmetric Mobility Tunneling (after reboot) ..... Enabled
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... hosp
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0x97e2
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 1
Mobility Control Message DSCP Value.............. 0
Controllers configured in the Mobility Group
MAC Address IP Address Group Name Multicast
IP Status
c4:64:13:8f:93:40 209.165.200.230 hosp 0.0.0.0
Up
Advanced Configuration
Probe request filtering.......................... Enabled
Probes fwd to controller per client per radio.... 0
Probe request rate-limiting interval............. 500 msec
EAP-Identity-Request Timeout (seconds)........... 30
EAP-Identity-Request Max Retries................. 2
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 30
EAP-Request Max Retries.......................... 2
EAPOL-Key Timeout (milliseconds)................. 1000
EAPOL-Key Max Retries............................ 2
dot11-padding.................................... Disabled
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1200
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Local mode Fast Heartbeat (seconds)........... disable
AP Hreap mode Fast Heartbeat (seconds)........... disable
AP Primary Discovery Timeout (seconds)........... 120
AP Primed Join Timeout (seconds)................. 0
Packet Forwarding watchdog timer (seconds)....... 240 (enable)
Location Configuration
RFID Tag data Collection......................... Enabled
RFID timeout.................................... 1200 seconds
RFID mobility.................................... Oui:00:14:7e : Vendor:pango S
tate:Disabled
Interface Configuration
Interface Name................................... management
MAC Address...................................... c4:64:13:8f:93:40
IP Address....................................... 209.165.200.230
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 209.165.200.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 192.168.1.1
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 209.165.200.230
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
Interface Name................................... service-port
MAC Address...................................... c4:64:13:8f:93:41
IP Address....................................... 192.168.1.157
IP Netmask....................................... 255.255.255.0
DHCP Option 82................................... Disabled
DHCP Protocol.................................... Disabled
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... virtual
MAC Address...................................... c4:64:13:8f:93:40
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
WLAN Configuration
WLAN Identifier.................................. 1
Profile Name..................................... HOSP3C
Network Name (SSID).............................. HOSP3C
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
NAC-State...................................... Disabled
Quarantine VLAN................................ 0
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
WLAN ACL......................................... unconfigured
DHCP Server...................................... 209.165.200.230
DHCP Address Assignment Required................. Enabled
Quality of Service............................... Platinum (voice)
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... 802.11b and 802.11g only
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
H-REAP Local Switching........................ Disabled
H-REAP Learn IP Address....................... Enabled
Infrastructure MFP protection................. Enabled
Client MFP.................................... Optional
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Band Select...................................... Enabled
Load Balancing................................... Enabled
Mobility Anchor List
WLAN ID IP Address Status
Press Enter to continue or to abort
Press Enter to continue or to abort
ACL Configuration
Press Enter to continue or to abort
CPU ACL Configuration
CPU Acl Name................................ NOT CONFIGURED
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
RADIUS Configuration
Vendor Id Backward Compatibility................. Disabled
Call Station Id Case............................. lower
Call Station Id Type............................. IP Address
Aggressive Failover.............................. Enabled
Keywrap.......................................... Disabled
Fallback Test:
Test Mode.................................... Off
Probe User Name.............................. cisco-probe
Interval (in seconds)........................ 300
MAC Delimiter for Authentication Messages........ hyphen
MAC Delimiter for Accounting Messages............ hyphen
Authentication Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/P
hase1/Group/Lifetime/Auth/Encr
Accounting Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/P
hase1/Group/Lifetime/Auth/Encr
--More or (q)uit current module or to abort
TACACS Configuration
Authentication Servers
Idx Server Address Port State Tout
Authorization Servers
Idx Server Address Port State Tout
Accounting Servers
Idx Server Address Port State Tout
LDAP Configuration
Press Enter to continue or to abort
Local EAP Configuration
User credentials database search order:
Primary ..................................... Local DB
Timer:
Active timeout .............................. 300
Configured EAP profiles:
EAP Method configuration:
EAP-FAST:
Server key ................................
TTL for the PAC ........................... 10
Anonymous provision allowed ............... Yes
Authority ID .............................. 436973636f00000000000000000000
00
Authority Information ..................... Cisco A-ID
Press Enter to continue or to abort
HREAP Group Summary
HREAP Group Summary: Count: 0
Group Name # Aps
Press Enter to continue or to abort
HREAP Group Detail
Press Enter to continue or to abort
Route Info
Number of Routes................................. 0
Destination Network Netmask Gateway
Press Enter to continue or to abort
Qos Queue Length Info
Platinum queue length............................ 100
Gold queue length................................ 75
Silver queue length.............................. 50
Bronze queue length.............................. 25
Press Enter to continue or to abort
Mac Filter Info
Press Enter to continue or to abort
Authorization List
Authorize MIC APs against AAA ................... disabled
Authorize LSC APs against Auth-List ............. disabled
Allow APs with MIC - Manufactured Installed C.... disabled
Allow APs with SSC - Self-Signed Certificate..... disabled
Allow APs with LSC - Locally Significant Cert.... disabled
Load Balancing Info
Aggressive Load Balancing........................ Disabled
Aggressive Load Balancing Window................. 5 clients
Aggressive Load Balancing Denial Count........... 3
Statistics
Total Denied Count............................... 0 clients
Total Denial Sent................................ 0 messages
Exceeded Denial Max Limit Count.................. 0 times
None 5G Candidate Count.......................... 0 times
None 2.4G Candidate Count........................ 0 times
Press Enter to continue or to abort
Dhcp Scope Info
Scope: PUNTOSAP
Enabled.......................................... Yes
Lease Time....................................... 86400 (1 day )
Pool Start....................................... 209.165.200.201
Pool End......................................... 209.165.200.229
Network.......................................... 209.165.200.0
Netmask.......................................... 255.255.255.0
Default Routers.................................. 0.0.0.0 0.0.0.0 0.0.0.0
DNS Domain.......................................
DNS.............................................. 0.0.0.0 0.0.0.0 0.0.0.0
Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0
Press Enter to continue or to abort
Exclusion List ConfigurationUnable to retrieve exclusion-list entry
Press Enter to continue or to abort
CDP Configuration
Press Enter to continue or to abort
Country Channels Configuration
Configured Country............................. ES - Spain
KEY: * = Channel is legal in this country and may be configured manually.
A = Channel is the Auto-RF default in this country.
. = Channel is not legal in this country.
C = Channel has been configured for use by Auto-RF.
x = Channel is available to be configured for use by Auto-RF.
(-,-) = (indoor, outdoor) regulatory doamin allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11bg :
Channels : 1 1 1 1 1
: 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
ES (-E ,-E ): A * * * * A * * * * A * * .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11a : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
: 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
ES (-E ,-E ): . A . A . A . A A A A A * * * * * * * * * * * . . . . .
Press Enter to continue or to abort
WPS Configuration Summary
Auto-Immune
Auto-Immune.................................... Disabled
Client Exclusion Policy
Excessive 802.11-association failures.......... Enabled
Excessive 802.11-authentication failures....... Enabled
Excessive 802.1x-authentication................ Enabled
IP-theft....................................... Enabled
Excessive Web authentication failure........... Enabled
Signature Policy
Signature Processing........................... Enabled
Press Enter to continue or to abort
Custom Web Configuration
Radius Authentication Method..................... PAP
Cisco Logo....................................... Enabled
CustomLogo....................................... None
Custom Title..................................... None
Custom Message................................... None
Custom Redirect URL.............................. None
Web Authentication Type.......................... Internal Default
External Web Authentication URL.................. None
Configuration Per Profile:
Rogue AP Configuration
Rogue Location Discovery Protocol................ Disabled
Rogue on wire Auto-Contain....................... Disabled
Rogue using our SSID Auto-Contain................ Disabled
Valid client on rogue AP Auto-Contain............ Disabled
Rogue AP timeout................................. 1200
MAC Address Classification # APs # Clients Last Heard
Adhoc Rogue Configuration
Detect and report Ad-Hoc Networks................ Enabled
Auto-Contain Ad-Hoc Networks..................... Disabled
Client MAC Address Adhoc BSSID State # APs Last Heard
Rogue Client Configuration
Validate rogue clients against AAA............... Disabled
Rogue Client Configuration
Validate rogue clients against AAA............... Disabled
--More-- or (q)uit
MAC Address State # APs Last Heard
Ignore List Configuration
MAC Address
Rogue Rule Configuration
Priority Rule Name State Type Match Hit Count
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.4
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
1.27
Build Type....................................... DATA + WPS
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 209.165.200.230
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 41 mins 2 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
Rome, Vienna
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... ES - Spain
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +39 C
External Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
(Cisco Controller) >
The AP log
AP442b.03dc.0925>
*Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Selected MWAR 'CISCO-CAPWAP-CONTROLLER
'(index 0).
*Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Go join a capwap controller
logging facility kern
^
% Invalid input detected at '^' marker.
logging facility kern
^
% Invalid input detected at '^' marker.
*Apr 19 23:10:19.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 209.165.200.230 peer_port: 5246
*Apr 19 23:10:19.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 19 23:10:20.200: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 209.165.200.230 peer_port: 5246
*Apr 19 23:10:20.201: %CAPWAP-5-SENDJOIN: sending Join Request to 209.165.200.23
0
*Apr 19 23:10:20.201: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
*Apr 19 23:10:20.354: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Apr 19 23:10:20.355: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 209
.165.200.230:5246
*Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 19 23:10:20.412: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
not established -
Unable to capture onClick event of htmlb:image in a controller
Hi,
I am trying to capture onClick event of an htmlb:image (which is present in my view) in DO_HANDLE_EVENT method of my controller.
Surprisingly, when I click the image, page does refreshes. But the event in not captured in do_handle_event method. Control never reaches that method. Whereas if I put onClick event of a button, it is easily captured in do_handle_event method.
Ex. code in my view is:
<%@page language="abap"%>
<%@extension name="bsp" prefix="bsp" %>
<%@extension name="htmlb" prefix="htmlb"%>
<htmlb:image id = "searchimg"
src = "consvalue.jpg"
onClick = "search" />
<htmlb:button id="searchbutton" onClick="search"
text="Event Test"/>
Now, the button event is captured, but not the image event.
Any idea why this might be happening?
Regards,
KaushalHi Kaushal,
are image and button enclosed by <htmlb:form> ?
Please post your of do_handle_event, where you look for the event.
Regards,
Sebastian -
How to fire event in view controller from component controller.
I have a component usage that fires an event wich i have subscribed in the component controller.
iv_usage->subscribe_event( iv_event_name = 'TAKE_IT'
iv_handler = me ).
After the event the method IF_BSP_WD_EVENT_HANDLER~HANDLE_EVENT in the component controller is called.
method if_bsp_wd_event_handler~handle_event.
endmethod.
The usage component is opened as a popup window. After pressing a button, the data is transfered via context node binding to the calling component. But now i want to close the popup.
My intension is to fire a event for the view controller in the IF_BSP_WD_EVENT_HANDLER~HANDLE_EVENT method that closes the popup.
Is this possible?
Or let me explain it this way:
I want to close a popup after a button in the popup is pressed.
best regards
JürgenHello Juergen
I am assuming your target pop-up is of type ref to IF_BSP_WD_POPUP.
1.Make this a view controller class attribute.
2. After the code to create the pop-up, you can add the following block :
gv_target_popup->set_on_close_event( iv_view = me iv_event_name = 'CLOSEPOPUP').
3. Now define event handler EH_ONCLOSEPOPUP where you can write the logic for on_close.
You can access the same reference gv_target_popup at the event handler level as well.
Hope this helps.
Regards
Nisha -
Unable to get parameter by using a controller in OAF
Hi!
I'm new using OAF and will appreciate your help a lot!!
FYI:
Basically I have to add 2 descriptive flexfields in a page (by creating a VO) and I have to update the table with the information registered on those dff (I've done all the logic already).
I created a Controller (CO) which calls a method declared in an Application module (AM) that executes a store procedure (the CO and AM have been created by me and they extend a standard CO and AM).
Problem:
However, just before updating.. I'm having a problem because I'm unable to get a parameter by using paramContext.getParameter("reqHeaderId"); that will help me to identify which row I need to update.
Since the instruction is not capturing the value, it returns null and I got the following error when I try to convert it to Number: oracle.apps.fnd.framework.OAException: java.lang.NumberFormatException: null
It's really important to mention that before getting to the page where I click the submit button that does the logic mentioned.. there are 2 pages before the one where I'm trying to capture the parameter and the parameter needed is set on the 1st page. I've been checking each standard CO of the 3 pages and they use the instruction pageContext.putParameter("reqHeaderId"); to pass it between the 3 pages (As far as I know, if not please correct me). On the 3rd and last standard CO it uses pageContext.getParameter("reqHeaderId"); to get the value and do some other logic.
So why Im not getting the value if I do the same thing (pageContext.getParameter("reqHeaderId");) on my xxController (which extends the standard CO)?
Here is the code of the controller:
public class xxController extends standardController {
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
String str;
str = pageContext.getParameter("_FORM_SUBMIT_BUTTON");
if ((str != null) && (str.equals("SubmitButton")))
String ReqHeaderId = pageContext.getParameter("reqHeaderId");
String ReqLineId = pageContext.getParameter("reqLindId");
Serializable[] parameters1 =
ReqHeaderId
,ReqLineId
,pageContext.getParameter("xxavtBienServicio") //dff
,pageContext.getParameter("xxavtAttribute3") //dff
String var = (String)am.invokeMethod("updateAttributes", parameters1); // updateAttributes is the method that converts ReqHeaderId to number and executes my store procedure
thank you for your help in advance!You need to verify that the parameter is being added to the pageContext from the first page to the last. You can do this by downloading the pages and all the class files to your development environment and put them into the myClasses directory. Then once you get it so it can be run in JDeveloper, you can actually invoke the debugger and do a watch on the page context for that parameter. It is important to note that you may need to download more than just those specific pages depending upon the setups of the supporting pages. I generally find it easier to just download everything for a particular application to my classes directory so I am not forever trying to find missing class files. Even then if they call some utility classes, you will need to download them to the JDevelper on your PC into the classes directory. But once you are able to run the pages in JDeveloper you will be able to do a lot more with the debugger.
Kristofer -
Not able to capture button event in extended controller
Hi Gurus,
I am not able to capture the button event (of seeded controller) in extended controller.
I have written code in extended controller like below:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean){
String str = pageContext.getParameter("event"); // copied from seeded controller for the button event //
if ("editLines".equals(str)) {
//cutom validation
super.processFormRequest(pageContext, webBean);
Please help me in resolving the issue.
Thanks,
Srinivas
///my cutom validateionHi Bm,
Thanks for your response.
I have tried the same but no luck.
Please help in getting this resolved.
Thanks,
Srinivas
Maybe you are looking for
-
I just upgraded to Yosemite from Maverick overnight on my mid 2012 MacBook air via app store. On first boot up this morning, I did NOT choose to encrypt my hard drive or use iCloud during set-up. I was proceeding thru the set-up steps, then got an u
-
How to design a particular screen?
Hi All, In my apllication i am working on oracle forms using manually. I would to design a particular page with the following attributes as shown below? How to design sunch kind of pages. Column names Expir Reocrd Y
-
Using Disk Utility From Recovery Partition
Is there an advantage to repairing permissions after booting into Recovery disk? (Hold Option key as restart) I realize that Repair disk will be available if needed & it is not available when using Disk Utility from Mac HD partition.
-
Hi experts, I have question regarding Route Plan - Route Pattern. We have variable numbering plan and problem is interdigit timeout T302. If its short - lets say less then 5 seconds, customer has to hurry up to dial - otherwise he will wait to long a
-
Adobe Application Manager removed my creative suite
I accidentally updated Adobe Application Manager and all my creative suite is gone from my computer. What to do?