Controlling area already used for org. unit problem

Hi people,
can you please help me with one problem, my customer is upgrading SAP HR from 4.6 to 6.0 and now we are testing QAS system.
When I create new or. unit in PPOME, I have Cost-centre inherited from the org.unit above, but when I want to put another Cost-centre it gives me the next error "Controlling area HR01 already used for organizational unit XXXXXXXX".
The same procedure worksin PRD system which is on version 4. 6. Could you please help me what is wrong because i am not able to change cost centre in the QAS system.
Thank you.
Romano
Edited by: Romano Cinotti on Oct 13, 2009 11:25 AM

Hi,
To which object u are going to change the cost center i.e, position, job, org.unit.
If you are changing the cost center to position, If it is not allowing to change the cost center then u have to check the parameters:
May be u already assigned cost center
May be u already assigned cost center to ur org, unit, which u assigned to ur position. If u already assigned diffrent cost center to ur org.unit, you may not change the cost center to ur position or job.
Regards
Devi.

Similar Messages

Repository A2 is already used for document area DATAARCH (Data Archiving].

Dear ALL,
Actually I am getting probelem Photo configuration in back end.
I am using Transaction SM31 maitaining the table TOAAR_C, here I am getting probelem 'Content Repository Identification' (A2), here i am getting below error.
Repository A2 is already used for document area DATAARCH (Data Archiving].
Please look in to issue.
Regards,
venkat

Jürgen - your answer was very helpful and I'm sure I'm now in the right direction!
However I still have an issue:
When the write job is finished and before deleting and storage, the archive file is not accessible - and then I am not able to continue with deletion and storage.
An example:
Filename: RMM_EKKO11180104855_CLL
Logical path: ARCHIVE_GLOBAL_PATH_WITH_ARCHIVE_LINK
Physical file name: E:SAPContRepZ5RMM_EKKO11180104855_CLL
E:SAPContRepZ5 is the root of the content repository and should according to the documentation contain the file during the delete phase and until final storage in the repository. But there is no file there.
In the log of the write job there are the following entries:
Job started
Step 001 started (program RM06EW70, variant Z_DEMO_7, user ID CLL)
Reading purchasing documents
Archiving session 000913 is being created
Path:
Name for new archive file: RMM_EKKO11180104855_CLL
1 of 1 purchasing documents processed
Job finished
I am a little concern about that no path is written to the job log - could maybe mean something.
Any ideas?
Thanks,
Claus.

Changing personnel area/subarea (IT1008) from org unit to position

We are live with PA and Org. Mgmt, but have been advised to change the infotype 1008 data - personnel area and subarea to be stored on the position instead of the org unit (where we have it now). A big reason for this is we have cases when we need to overwrite the personnel subarea at the position level. For example, a position belonging to an org unit with subarea ABCD, may really be in subarea WXYZ. Therefore, even though the org unit is ABCD, it will be overwritten at the position level to WXYZ. My understanding is that the RHINTE30 program will not work approrpiately if we are maintaining the data this way.
In transaction PPOME there is an account assignment tab on the org unit with cost center (filled in) and personnel area/subarea (which will be blank moving forward since that data won't be maintained on the org unit). Then, there is also an account assignment tab on the position with cost center inherited from the org unit (sometimes needing to be overwritten at the position level), and the personnel area/subarea data. My question is how should I handle the view of PPOME for this data? Can I hide the personnel area and subarea on the account assignment tab for the org units only so it is not confusing for the users? The problem with having it this way is that personnel area and subarea are blank on the org unit and filled on on the position. They are conflicting and both visable/maintainable to the User. Any advise please? Thanks!

Hi Nish,
I gave you my input on your other related message and now will go for this one.
As I commented on the other message, RHINTE30 will not integrate infotypes 1008 and 1013. So you don't have to worry about using this functionality (first part of your message).
On the second part (personnel area / subarea on position rather than org unit): there are some considerations here that are more functional / process driven than technical. From a technical point of view, everything can be done. You can hide data from infotype 1008 on the tabstrip for your org. unit using dynpro handling, even via customizing. You can even transfer the data from infotype 1008 on the org. units to the positions or delimit it on the org units. There are some quite easy ways of achieving this using the LMSW tool (have you used it? I can forward some documentation).
But personally, I would not recommend to do this from a process point of view. Everything in SAP HR is about the inheritance concept, and I think this works very well when it comes to org. units and positions. It is normally advisable to record personnel area / subarea on the org. unit level. This will be inherited by positions (even if you cannot see it at position level in PPOME) and thus defaulted for the employee. At position level you should handle only the exceptions, which will be in turn also defaulted for the employee holding the position. In this way, data maintenance is minimized. If you delete (or do not use from now on) information about infotype 1008 on org. unit level, your HR department will have to maintain this every time a position is created, and even in cases in which a position is shifted from one org. unit to another one.
In my opinion, you should address this with your HR department and explain the concept and the consequences of maintaining all at position level. It would only be advisable to do it if the org. unit structure is very cross-personnel areas and subareas. If it is a matter of handling exceptions, again, I would recommend to continue recording this data at org. unit level. All in all, if the data is not recorded on the position and you need to see which is its personnel area, you just need to double-click on the org. unit above.
Just wanted to let you know my opinion, of course it's your decision. By the way, I'm of course not aware of other possible implications like home-developed reporting and so on.
Regards,
Rodrigo

Search help for org units

Hi,
I'm looking for a tree search help for org units without organisational controls.
Actually I'm using the search help 'RH_TYPE_STRUC_HELP' but the units are only the units directed by the user. For one of the specific infotype, I need to let the user select an unit that is not in his own structure... to save an information like "I don't want to work here".
Have you got some function that can help me ??
Thanks,
Christophe.

Hi
I want to know only the parent org units existed at company code level or Personnel area level for the position search hlep and not the org units and positions relationship

See which clips are already used in the sequence

hi there,
I am a complete newby for mac and fce
I started a project for my dive video in the Filippines.
I have like a 1000 clips in the browser.
Is there a way in fce to see which clips are already use in the sequence and which are not?
In pinacle studio they were marked with a red v

This is a way to solve your problem.
http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

Call items are not created for Org BP's when created from Campaigns

Hello All,
We are creating Campaigns for Org BP's and pushing them to channel Phone, which is creating call list but call items are not created for Org BP's.
Org BP's are maintained with Contact Person's, callling hours and phone number are maintained against contact person BP, but still call items are not created with in call list.
Please let me know if I miss any further steps.
Thanks,
Raj.

Hi Debasis,
You can delete the PDS by using /SAPAPO/CULL_RTO_DEL - Delete Production Data Structure . And recif the it to APO. You can use CURTO_CREATE for it.
For the error message /SAPAPO/OM_ERROR2 119 there are couple of OSS notes please check the same.
1648558 - CIF error: 'Mode linkage problem with primary resource'
1325227 - PDS-EXP: Mode linkage problem with primary resource
Regards,
RBrahmankar

CRMD_BUS2000108 - organizational unit and attributes for org. unit

Hi all!
As I'm customizing Lead creation (and in a second step lead generation)
I would like to receive tips about "selection of organizational unit and attributes for org. unit".
I expected that, by entering a BP number of a prospect or sold-to party, the organizational unit and its attributes would be displayed automatically on the tab "organization".
This is not the case. When I start the lead creation, there is a pop-up screen inviting me to choose the organizational unit. afterwards a pop-up screen for the attributes of the org unit. Only after setting a flag in both pop-ups, I see the actual "lead" transaction. When I enter a BP number, the sales assistant and sales rep are found automatically.
Could anybody please explain how to change the customizing?
I would like to see the lead transaction (create) first, enter a bp number and than have the org unit and its attributes, the sales rep and sales assistant found automatically.
Any usefull answer (would make my day ), will be rewarded.
Thank you very much for your suggestions and time in advance!
I. Van Acker

hi
this is happening because you have not done the org data determination in your transaction,just go to SPRO and there in org data determination ,you have many standard ORGMAN rules available which you can use which will pick the data according to the user ,BPs etc.
it will enable you to first give BP and then the org data will be driven automatically from the system according to the rule in org data determination.
so first go and use rule ,try using rule ORGMAN_12
then attach this rule to the org data profile and then add this org data profile to the transaction in basic settings in transaction where you have defined your lead transaction.
it will solve your purpose
best regards
ashish

Cannot start family sharing: Apple id is already used for shared purchases

I'm trying to set-up family sharing on multiple devices, but I'm informed that my mac.com address is "already used for shared purchases" and "accounts can only be part of one Family at a time" with a dialogue box of "OK". We are only one family, and all devices were recently under my iTunes/Apple account. How do I change that so that I can set up family sharing? I have an 11 year old itching for her own phone and want to be able to share, but also to manually approve purchases (which I think is the point of family sharing, especially with someone under 13.)

I FIGURED THIS ONE OUT!!! What happened was initially I had set up a Family Sharing account under my wife's old iCloud login (old email address) . I had set her up as the administrator of the account. We used MY credit card info to handle any purchases made.
Some time later we decided to share MY iCloud account rather than having separate accounts (thus, same email for iCloud login). While switching her out of her old iCloud login over to sharing my login, it never crossed my mind that I had used her old iCloud login to set up Family Sharing. Since her old iCloud login was set up as the administrator of the account, all I had to do was sign into iCloud with her old email address and password that she had used before. Once logged in, I went to Family Sharing and chose an option to stop Family Sharing. As soon as I did that, I re-logged in with the new shared iCloud account and was able to immediately set up Family Sharing. Phew!!!
Hope this helps

Screen or Report that shows all Responsibilities for Org Unit

How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
Regards,
Kumar

HAI..
External number assignment
If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
Number assignment for plan version 10 / object type S: Subgroup 10S

Remove Actions for Org Unit & Positiin in Succession Planning.

Hi,
We are in process of implementing Nakisa 3.0 SP1.
In succession planning, we want to remove few actions for org units & position. I tried to look for the configuration of the same in admin console in detailed configuration for my positions & my org units, but could not find it. Please help.
Thanks
Prashant

Hi Prashant,
Do you mean the items in the Actions drop-down menu on the OrgUnit/Positions details panels? This cannot be done in the AdminConsole. You need to go to the <build>\AppResource\linkconfiguration folder and copy the files you want to change to <build>\.detla\AppResource\linkconfiguration folder and then change them.
I believe the files you want are SAPOrgUnitDetailsConfiguration.xml and SAPPositionDetailsConfiguration.xml. Just delete or comment out the lines for the actions you want to remove.
Best regards,
Luke

No entries for org unit, job or position in T5KWB

Hi Experts,
I am running payroll for canada , i am getting this error for 2 employees for whom the org assignment been chaged recently -
now they are giving , kindly help me - i have checked this table T5KWB and it dosnet hold value maintained for org unit
50737186
KTXDM Canadian Tax Infotypes Data Management
Input
P0461
P0462
P0463
P0464
Processing
No entries for org unit, job or position in T5KWB
Search in organization structure failed
Check T5KWB for org unit 50737186 or higher-level org unit for 20101031
Thanks
Jay

Hi Jay
Get the position of the employees for whom you are getting the error message and maintain infotype "Canada Groups for WCB" for those positions. This should solve your issue.
You may want to go through below link:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/WCB
Hope this helps
Best Regards
Reddy

Infotype for org.unit

hallow
i wont to buield infotype for org.unit
i thihnk i have to use ppci or ppcj but i dont now how
please help
regards

Hi Antonio,
Why you want to separetly create Infotype for Organizational Units???
Once you create them through simple maintainince by default 1000 & 1001 will be maintained. If you create Org Unit through Expert Mode you need to maintain them mannually. And select from the Infotype Menu which ever Infotype you want to maintain.
Regards
Pavani
<b>Remainder: Points to be given on Answers</b>

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

BP number is missing for org units in org model

Hi Guys,
I have created org model in PPOCA_CRM and saved it CRM7.0. But BP numbers did not get generated for org units which I have created.
Can any one suggest me what is the reason and what needs to be done in order to get BP numbers for already created org units in PPOCA_ CRM or PPOMA_CRM.
Thanks for you help,
JM

Go to CRM IMG->Cross Application components->SAP Business partner->Business Partner->Number Ranges and Groupings->Define Groupings and Assign number ranges.
There check if any number range is defined with the "Int Std grouping" . If it is not define it.
and in SM30 for "T77S0" for entries HRALX/OSUBG assign a number range.

Controlling area already used for org. unit problem

Similar Messages

Maybe you are looking for