Controlling Order Of Selected Applications Run Order

I have a task sequence and I have static entries for all applications that are part of the default build. I have a list of optional applications that run when the "Install Applications" action is listed. I need to add a secure delete/format option.
I do not want it to run on every instance, but I want it available to select and if selected, run it before the formation/partition and OS installation.
Can this be done?

The MDT "Replace" task sequence has steps that support a secure delete/format option, you can start to look there.
Otherwise, I'm not 100% sure what you are trying to do. Are you trying to secure delete/format disk 0 or some other disks on the system?
If you are just trying to securely erase the old disk and install a new OS, all the while ensuring that no data is transferred over, I would just perform a "NewComputer" installation, with:
* ensure that bitlocker is enabled in the wizard.
* set BDEDisablePreProvisioning = YES
* Set BDEWaitForEncryption = TRUE
These steps will force a *COMPLETE* unrecoverable overwrite of the entire disk.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5. I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files. Is there a known procedure to do this? Any tips or feedback?

I have a 15" MacBook Pro 2.4 GHz Intel Core 2 Duo (Early 2008) running OSX Lion 10.7.5.
I want to erase the Hard Drive, install Mountain Lion, and manually restore select applications and files.
Is there a known procedure to do this? Any tips or feedback?

1. Make a backup, open App Store and purchase Mountain Lion. When its download finishes, close the installer and open Lion Diskmaker to create a bootable USB drive with Mountain Lion.
2. Press Option key while your Mac is starting, select the external drive and open Disk Utility.
3. Select Macintosh HD in the sidebar and erase the drive.
4. Close the window and install Mountain Lion

Not able to clear session of web application running inside wpf browser control

Hi,
I have used below code to clear session of web application running inside wpf browser control .
[DllImport("wininet.dll", SetLastError = true)]
private static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength);
InternetSetOption(IntPtr.Zero, INTERNET_OPTION_END_BROWSER_SESSION, IntPtr.Zero, 0);
This code is working in Windows 8 but it is not working in windows 7 and windows 8.1.
I want to know why it is not working and how to make it work in windows 7 and windows 8.1
Please help.
Thanks & Regards,
Pritesh

Hi,
I have used below code to clear session of web application running inside wpf browser control .
[DllImport("wininet.dll", SetLastError = true)]
private static extern bool InternetSetOption(IntPtr hInternet, int dwOption, IntPtr lpBuffer, int lpdwBufferLength);
InternetSetOption(IntPtr.Zero, INTERNET_OPTION_END_BROWSER_SESSION, IntPtr.Zero, 0);
This code is working in Windows 8 but it is not working in windows 7 and windows 8.1.
I want to know why it is not working and how to make it work in windows 7 and windows 8.1
Please help.
Thanks & Regards,
Pritesh

If I get an "Application.Run()" exception, how do I determine which control threw it?

I've inherited some code with less-than-perfect exception handling. Once in a while I get an unhandled exception. The debugger breaks at Application.Run(), which isn't very helpful. Putting a try()/catch() around Application.Run() lets me display the stack trace, but this isn't helpful either -- all I learn from it is that some NI control somewhere threw an exception.
Is there a way I can find the name of the control which threw the exception?
A simple test case is:
* project with one form, containing two NumericEdit controls
* each control is set to a range of 0 to 100, with "OutOfRangeMode" set to "ThrowException" (the default)
Run the program. Enter a value of -1 in one of the controls Without any exception handler provided, the excption appears at the Application.Run() level. How can I tell which control thew the exception? My actual application has dozens of controls and sometimes crashes at startup. If I knew which control were out of range it'd probably be easy to fix.
Thanks for ideas,
Kevin

You are not setting to default values at startup?

Confirmation Control & Order acknowledgment disappears for a returns order

Hi Friends,
I have a requirement where in I have to update order acknowlegment no in a returns PO.
But as soon as we check the returns indicator at the line item level the Conf Control & Order ack are greyed out. If I uncheck the returns indicatoe they are available for input.
Please let me know why this happens. I have checked in screen layout for ME21N & RL doc type and the fields are maintained as optional entries.
Thanks & Regards,
Narayan.

This is due to fact that Order acknowlegment is not possible in case of return PO.

How to use connection pool of datasource to make applications run faster?

Hi, erveryone
I prepare to implement a servlet that access database and do sync with client.
When I access database, I would like to configure a datasource in weblogic and use connection pool.
In order to make servlet application run significantly faster, my servet how to use connection poo is much moreresonable?
For example, my servlet has many times database access. Is it true that geting and close a connection whenever
one time database access finished?
If from the servlet begins, the db connection is hold till servlet finalize. Will the solution affect the servlet performance? Is there any official document to introduce connection pool program? I search some documents.
<The Java EE 6Tutorial> introduce some simple intruduction about connection pool.

1. Use WebLogic Servers Data Source for Database Connections.
2. Open and close the connections where you need it. Dont open it in begin and close in finalise. That is bad practice.
3. Even when you invoke Connection.close () webLogic will not close the connection. it will commit the transaction and return it back to the pool rather than physically closing the DB connection.
4. You can tune data source for minimum, maximum and increments of connections that you need based on your application requirement.

Which servers do web applications run on?

As far as I know, SharePoint runs IIS web sites for each web application on any server that has "SharePoint Foundation Web Application" running on it. And this is an "all or nothing" operation - you get all the web applications or none.
I've always been uneasy about this because you need the Web Application on the Central Admin server, but then that puts *all* your web apps on the server, which is unnecessary.
Is there a way to assign web apps to specific servers?
Philo Janus, MCP Bridging business & Technology: http://www.saintchad.org/ Telecommuter? http://www.homeofficesurvival.com/ Author: Pro InfoPath 2007 & Pro InfoPath 2010 Pro PerformancePoint 2007 Pro SQL Server Analysis Services 2008 Building Integrated
Business Intelligence Solutions

Hiya,
Out of the box, it's an all or nothing. Either the servers acts as WFE or it does not. This is part of the the streamlined topology strategy, and the same as any previous topology. This in order to reduce maintenance operation time/cost.

How to avoid of application running on Oracle 10g to be copied?

I am a newbie to the security issues, so I need your help, please, where to start / what to read:
I have an application running across many customers on Oracle 10g. I have faced lately that our users
can use their daily backups to establish a totaly new database on a same / different server
and point our application to use it as well.
Is there any way to avoid it? F.e. I thought to use SELECT * FROM v$instance; to get the server instance details, and
in result with some other function to obtain, let say, local server's (WIN2003) details,
such as HD Serial Number, MAC number or so and then to check these values each time user runs the application.
Is it the correct way? What are the basics here at all?
Many thanks in advance to all!

A lot of enterprises, however, actively avoid systems which are locked down to a particular server for very legitimate reasons. If my data center dies in the middle of the night, I sure don't want to have to call your mobile phone so that you can get to a computer, log in to the office network, and get me a new key so that I can finish my emergency failover. If I've got dozens of applications, I absolutely don't want to do that with dozens of different vendors.
It sounds like your problem, though, isn't that users are installing your software on multiple computers it's that they are accessing functionality they haven't licensed. That is generally a much easier problem to solve and doesn't require you to lock anything down to a particular machine. You can create a table LICENSED_CONTENT, for example,
CREATE TABLE licensed_content (
client_id NUMBER,
content_type VARCHAR2(30),
key RAW(128)
)In this case, KEY is, say, a hash (using the DBMS_CRYPTO or DBMS_OBFUSCATION_TOOLKIT packages if you'd like) of the client_id, content_type, and a bit of salt (i.e. a fixed string that only you know). When you sell a license to manage diamond content, you provide a script that inserts the appropriate row in the LICENSED_CONTENT table. When your application starts up, it reads the LICENSED_CONTENT table and verifies the hash before allowing users to access that type of content. This allows legitimate customers to move the software from one system to another but prevents them from accessing new functionality without a new license.
Justin

Is it possible to access Pages from an web application running in Safari in i-Pad?

Is it possible to access Pages application from an web application running on safari browser in iPad ?

Since you control the application AND the plugin - you can define ANY method of communication you want. Shared files, shared memory, IPC, named pipes, etc.

I had my screen sectioned with an application running permanently in it and have lost it, please can someone tell me how to get it to do that again? Thank you.

Hello,
At some point a while ago I somehow mistakenly must have clicked on something in error and suddenly my Google Analytics programme (which is shown in by bookmarks at the top of the screen) was displayed in a section of the browser window to the left - the browser screen was split into two sections, with the google analytics program running in the left section and the right section was my regular browser window where everything ran as normal.
I have no idea how this happened, but love it and have come to really appreciate it. However I've just changed computers, operating systems and allsorts and now I've got everything back on track that window has sadly gone and I cannot find how to get it back. I've searched through every option I can find and cannot figure out how to do that again!
Can anyone help please? :-)

Hi jscher200,
Thank you for your reply, sorry for the VERY late late response, but I have just figured out how to control this separate 'panel'. I find it really useful for monitoring Google Analytics in as it can just sit there running. It does have its limitations, as it's a limited size (you can't expand it to full screen view), so you can only ever see a vertical section of a website and need to scroll to look to the right or left, but I have the live view of people accessing my website running on there and if the numbers start racking up at any time, I can scroll to look and see what pages they are accessing, where they've been referred from, etc.
To get it to work, you save a website address in the Bookmarks Toolbar and when you can see it sitting on the toolbar at the top of the screen with its little icon, right click on it then click 'properties', then tick the box 'Load this bookmark in the sidebar'. The next time you click on this bookmark to open the website, it will load in this sidebar, which looks like a separate 'window' but is immovable. You can only have one sidebar application running at a time, but can change it by right clicking on the bookmark you want to load in there and it will then change to that one next time you click on that bookmark.
I hope this might be useful to others, as I asked for help with this on loads of forums and not one person knew that this existed - even really skilled techies!

How can I debug a web application running on Weblogic 10.3

Hello,
I have inherited a NetUI Web Application developed using Weblogic Workshop and I can't manage to debug it. I have configure my server in Workshop and to debug it I right-click the project in Project Exporer and select Debug As -> Debug On Server, but this isn't working. The browser does open the application doesn't appear to be getting delpoyed.
Can anyone help me out? I am using Weblogic 10.3 and Java 1.6.
Thanks,
Sean

Hi Kal,
The application is an enterprise application packaged as an EAR. if I right click on the project and click Debug As -> Debug on Server, the application appears in the Server Tab, but it does not start automatically. If I then manually start the server the application runs, but it does not stop at break points and I can not debug it.
If I right-click on the web project that is packaged as part of the ear and select Debug As -> Debug On Server again the application is deployed, but I can't debug it. I don't get error messages, the application functions as normal but it does not stop at break points. When I attempt to debug the application via the Web Project, two browsers open automatically, both correctly displaying the application.
Regards,
Sean

Excel VBA: Getting error 1004 using APPLICATION.RUN to run a macro

I'm getting a 1004 error when my ADDIN tries to launch a macro already in a workbook .
The macro resides in a workbook (on disk before it was opened in this session) and the addin opened the workbook, updated some data fields in spreasheets in the workbook and now is trying to cause the macro, already in that workbook, to execute as though
the user had opened the workbook, made the changes, and clicked the button connected to that macro. What the addin copied into the workbook was data in cells that the macro uses for inputs to its calcualtions.
The error reads: "The macro may not be available in this workbook or all macros may be disabled"
The command in question is in an ADDIN and its code is effectively:
v2="Taxplan Template 1.17.xlsm!SUMMARIZEYEAR
Application.run v2
...etc
Immediately upon executing "Application.run " it jumps to the on error location.
Taxplan Template 1.17.xlsm is open and accessible (the addin has just copied data into it and the macro is to update a summary based on that updated data) and it contains the macro Summarizeyear which has no arguments and is not private.
If I set a breakpoint in the addin right before the "Application.run", stop the addin and manually run the macro it works fine. It begins like:
Sub SummarizeYear()
Sheets("Summary").Select
...etc
If I manually open the workbook Taxplan Template 1.17 I can run the macro SUMMARIZEYEAR without issue.
Macros are enabled in Excel.
Probably not pertinent but I've used the same style of code with .xls workbooks in the past without a hitch, this is the first instance where I used it with .xlsm format workbooks.
Excel 2007 SP3
Thanks

I'm getting a 1004 error when my ADDIN tries to launch a macro already in a workbook .
The macro resides in a workbook (on disk before it was opened in this session) and the addin opened the workbook, updated some data fields in spreasheets in the workbook and now is trying to cause the macro, already in that workbook, to execute as though
the user had opened the workbook, made the changes, and clicked the button connected to that macro. What the addin copied into the workbook was data in cells that the macro uses for inputs to its calcualtions.
The error reads: "The macro may not be available in this workbook or all macros may be disabled"
The command in question is in an ADDIN and its code is effectively:
v2="Taxplan Template 1.17.xlsm!SUMMARIZEYEAR
Application.run v2
...etc
Immediately upon executing "Application.run " it jumps to the on error location.
Taxplan Template 1.17.xlsm is open and accessible (the addin has just copied data into it and the macro is to update a summary based on that updated data) and it contains the macro Summarizeyear which has no arguments and is not private.
If I set a breakpoint in the addin right before the "Application.run", stop the addin and manually run the macro it works fine. It begins like:
Sub SummarizeYear()
Sheets("Summary").Select
...etc
If I manually open the workbook Taxplan Template 1.17 I can run the macro SUMMARIZEYEAR without issue.
Macros are enabled in Excel.
Probably not pertinent but I've used the same style of code with .xls workbooks in the past without a hitch, this is the first instance where I used it with .xlsm format workbooks.
Excel 2007 SP3
Thanks
This line is not quite correct,
v2="Taxplan Template 1.17.xlsm!SUMMARIZEYEAR
it is missing the closing double quote, also since your file name contains a space, I would also enclose it in single quotes.

Open Files in selected application

As with the files in "Finder" I click on them and they open in a particular application (default) or one of my choosing. Is there a way to transfer files to the iPad and them open them with the application of my choice?

It is just that I would like to have a system like "Finder" available so I could see all my various documents in one list.
This is not possible.
Because apps are sandboxed, which prevents data or files from being accessed by other apps. Helps to prevent data corruption and malware.
From the iOS Application Programming Guide
Security
An important job of iOS is to ensure the security of the user’s device and the applications running on it. To this end, iOS implements several features to protect the integrity of the user’s data and to ensure that applications do not interfere with one another or the system.
*The Application Sandbox*For security reasons, iOS restricts each application (including its preferences and data) to a unique location in the file system. This restriction is part of the security feature known as the application’s sandbox. The sandbox is a set of fine-grained controls limiting an application’s access to files, preferences, network resources, hardware, and so on. Each application has access to the contents of its own sandbox but cannot access other applications’ sandboxes."

Help!: Control reference seamingly "lost" in run-time execution mode

Hi!
The Facts:
LabView 6.1 PC under NT.
I've been using "Vi loader" technique since a few month s to distribute a LabView application on severals PCs without having to re-compile it each time. My application uses more than 500 VIs so I can't build it directly. The directories/Vis of the application are simply copied on the target PC and run through the Vi loader technique instead of using the development environnement.
The problem:
Since the last release of the my application, differences between the application running in development mode or run-time mode have appeared:
One VI reading a .ini file does not act the same way if runned in the developpment environnment or
runned in the run-time environnment. This VI uses control-references from its front-panel and passes them to sub vis. In run-time execution those references seems to be perverted: the sub-vis get them but can't access their properties like Label Name, Values,...
All works perfectly fine if the VI is runned in the environnment developpment.
Moreover the same sub-vis called with other control references in other VIs work fine.
Question:
Has anyone seen any behavioral difference between run-time execution and development environnement execution?
Are there any differences in the linkage process between those 2 execution ways?
Is there any labview Feature that would automaticaly "de-allocate" references at run time and would do so "too early"?
Is there any know problem with poly-morphique VIS in run-time execution mode.
That's all, any idea, lead, wellcome!

Hi Andrew!
I've allready had a look at the "Problem with VI Loader technique". It only deals with top vis not working (ie broken) when called from loader in Run-Time mode because of ill declared vi.lib path.
It's "unfortunately" not my problem: My VI is not broken, it's kind'a working, but not as it does in development environment execution mode.
If NI people are reading this, I would like to send them the VI and it sub-VIs to understand if something has been perverted .
The problem is seen on all three target PCs.
Moreover, a new one has appeared: in run-time mode, the standard "file dialog" vi called to prompt the user for a file with a given extension pattern sends back the file name with the extension "double dotted" (exemple: anything..data
instead of anything.data).
About the first problem, does any know why a Ctrl Refnum would loose its parent information (name, value...) in run-time execution mode?
Bye!

Error clicking select application on Application Diagnostics Diagnose

Login as sysadmin
Application Diagnostics >Diagnose > Select Application
An error has occurred!
Error handle request; Root exception is: java.lang.StackOverflowError
N.B :- There are no traces generated in apache error logs even after debug is enabled
what could be the issue related to ?
How to generate more traces for framework issues ?
Navigation path
==========
Application Diagnostics >Diagnose > Select Application [Gives Error]
Recent Changes
===========
Upgraded E-Business Suite 12.1.2 from 11.510.2
Issue was noticed when wanted to run diagnostics test for certain application.
There are no invalid objects related to FND,ICX,AD etc
There are no database alert log too
Please help to debug this issue

Hi user;
Please check below and see its helpful:
How to debug OA Framework errors [ID 263642.1]
How To Debug The Java Stack/Framework Error [ID 833055.1]
How to Get FND Debug Log File for Framework Page? [ID 733273.1]
Oracle Application Framework Developer's Guide Release 12.1.2 [ID 972774.1]
Regard
Helios

Controlling Order Of Selected Applications Run Order

Similar Messages

Maybe you are looking for