Controlling Remote Session Screen Resolution

Is there a way to turn off dynamic resolution update for rdp connections (outside of the checkbox on the connection itself)?
It would be best if we could either disable the client system form sending the resolution info to the connections, or manually set the parameters that are being sent to the client.
Thank you,

Hi Daniel,
Thank you for posting in Windows Server Forum.
You can control the remote session screen resolution by two ways. When you connect you “Remote Desktop connection” in Display Tab you can adjust the screen resolution. And apart from that you can edit the .RDP file of server (with Notepad) which you need to
take remote session by “Desktop Height and width” setting. Please refer following article for more information.
RDP Settings for Remote Desktop Services in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ff393699(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

Screen resolution problem in table control

when i was transfering data in BDC using table control,i got screen resolution problem.
how to rectify the problem?

Hi,
Check this coding.
WA_CTU_PARAMS type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronous update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM WA_CTU_PARAMS
MESSAGES INTO it_mesg.
Default size will play good role in terms of resolution. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resolution. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Hope this resolves your query.
Reward all the helpful answers.
Regards

BDC screen resolution

How to do screen resolution in BDC table control ?

so there so many threads for screen resolution check it
how to solve screen resolution in bdc
Screen Resolution in Bdc
How to make screen resolution independent in BDC
Re: Screen Resolution problem in BDC
screen resolution problem in table control
whats the screen resolution problem with bdc's how to solve it?
Screen Resolution Problem in Session Method

M92P Screen Resolution Reverts to 1024x768

We have an issue with our desktops where the screen resolution reverts to 1024x768 on an apparent screen refresh.
We are using Windows 7 M92P ThinkCentre desktops with dual displayport, extended display output on L2251X's (both at 1680x1050). The graphics driver/chip is on-board Intel HD 4000.
It all works fine until the screen refreshes, an example being when a UAC prompt appears. The monitors will flip (so the primary display will become display 2), display 1 will change to 1024x768 and display 2 will change to 800x600.
If you go into Control Panel > Display > Screen Resolution and try to drag display 2 back into it's correct position whilst setting the correct resolutions, clicking apply does nothing. If you try this multiple times (anywhere from 3-10 attempts) it will eventually apply.
Is this a memory issue? We have 4GB of memory installed.
Is it a driver issue? We have the latest Intel HD 4000 driver and latest BIOS (up to this post's timestamp).
Any help would be appreciated!

Hi, TheMagic89
Have you updated your machines to the latest BIOS, found here? Looking at the ReadMe of the BIOS update, it does provide some assistance with another resolution issue and it may help. Also, how long have you been facing this issue?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Another feature to allow users to change screen resolution to HD for gaming

I liked k3 Note, smartphone which is filled with lots of professional features. Can you add a control to change screen resolution to HD for games. Lots of people are there which are thinking that other phones' gpu are better and the Mali t760 m2 not so good.

Hi
In case someone else encounters the same problem, here is some more information.
The high refresh rate is quite visible in Device Manager. It would refresh every one or two seconds. The cause seems to be a conflict between a Fingerprint software installed during the Task sequence and the Validity Sensors Drivers.
I made a Scan for hardware change in Device manager and saw that a few devices were appearing as unknown. Right click, update drivers from local cache solved the problem.
I cancelled install of the fingerprint software and did not encounter the problem anymore.
Brgds
bruno

Unable to Change Screen Resolution in Remote Session - Windows Server 2012 R2

Does anybody know of a way to allow Remote Desktop users to adjust their own screen resolution in a remote session under Windows Server 2012 R2? We are struggling with this and can't seem to find a solution.
When users login to their RDP session and try to adjust their screen resolution this message is displayed in Control Panel:
"The display settings can't be changed from a remote session."
We don't want to use the "make text and other items larger or smaller" scaling feature, as this produces undesirable results with some of our applications. We also don't want to have to support multiple types of RDP clients or RDP shortcut
files.
We have looked at other posts but can't find an answer that applies to Windows Server 2012 R2. The closest thing we could find is KB2726399, but it only applies to Server 2008.
Does anybody have a solution for Server 2012?
Thanks

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

Screen resolution in remote connection

Hello.
I have several macs, both at home and at the office.
I like to use my MacBook Air on the go.
When at the office, I like to work from a mac mini with a full HD screen resolution.
The MacBook Air support this external screen.
In order to avoid connecting and deconnecting the screen all the time,
I would like to connect to the MacBook Air from the mac Mini,
and enjoy the full HD screen resolution, while working remotely on the MB Air.
Unfortunately, I only can access the native MB Air resolution of 1440*900.
Is there any way to solve this ?
Thanks for your support,
V.

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

How to handle screen resolution in bdc session method.

hi all,
how to handle screen resolution in bdc session method.

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

How to do screen resolution in session method

hi guru how to do screen resolution in session method.
please tell me.
regards
subhasis

Sometime back this is refered in SDN :
Check table <i>CTU_PARAMS</i> and field <i>DEFSIZE</i> for setting fixed line of table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Thanks!!

How to handle screen resolution in session method

how to handle screen resolution in session method without bdc_insert .

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

Screen resolution for remote client

I have used Windows remote desktop and it has the fuction of setting the display resolution of the target machine when you login. So if i am on using a small laptop with small screen resolution (1024 x 768) and connect to a remote machine with a high resolution i can set the remote machine to display at 1024x768 nativly (no stretching or scalling).
DOES APPLE REMOTE DESKTOP HAVE THIS FUNCTIONALITY?

Ok so the solution was to user a different VNC client in Ubuntu. "Vinagre" allows you to view your remote session scaled to any size you like. It will however retain the dimentions of your MacBook screen.
One thing to be aware of is that when authentication your VNC session (entering your username and password) Vinagre only allows you to enter a password of 8 characters max. So if your password is longer then 8 characters you will have to shorten it to user Vinagre... A bit annoying but at least it works.
Techy notes:
It is actially the VNC server Vino that Vinagre uses that is enforcing the password length limit. So if using an alternative client that uses Vino as it's VNC server this limit will apply for that client also.
Even though you are scaling the client session down VNC sends the host's full resolution so you will still transfer a lot of data over the network.

Unix Command to change remote screen resolution

greetings,
well the topic pretty much says it all :
I'm running ARD 2,2 on a 10.2.8 Server , from my remote admin box I get a recurring "attempt to reconnect" to the machine when controlling or observing the screen.
I ran a report which list the servers screen resolution as 1600x1200 (holy smokes bullwinkle). This setting is not correct. I can fully interact with the server (thru the menus of ARD) and all services are running. The server is at the login screen ( as per ARD "current app").
thank you

First, you need to install a utility called cscreen (freeware) on the server (or any other workstation you want to control).
Once you have that installed, here is the syntax for the Send Unix Command:
Usage: cscreen [-d <depth>] [-x <width>] [-y <height>] [-r <refresh>] [-s <display>] [-v] [-m] [-f] [-l] [-h]
[-d <depth>] : specifies the bit depth (bits per pixel)
[-x <width>] : specifies the width in pixels
[-y <height>] : specifies the height in pixels
[-r <refresh>] : specifies the refresh rate in Hz
[-s <display>] : specifies which display to use (defaults to main display)
use a as the option to -s to specify the action on all displays
[-v] : display valid modes (use -s to specify display or nothing for the default)
[-m] : require an exact match
[-f] : forces settings (ignores safety mechanisms; USE AT YOUR OWN RISK)
[-l] : lists the current displays and modes
[-p] : sets the requested display to have the menu bar
[-h] : displays the usage
Note: Using -p will change the display index so you will likely want to use -l again to show the current displays if you wish to use -p a second time.
For example, to set to 1024x768:
/pathtoutility/cscreen -x 1024 -y 768

BDC Session method : Screen Resolution Problem

Hi all,
I have created a BDC for Sales Order(VA01) and Call Transaction method working perfectly but when Iam creating a session and running in background then the session is ending up with errors.When I processed it in foreground mode I observed that the screen resolution is smaller.I tried checikng the checkbox 'Display standard size' but it is not working.Any Idea how to resolve this issue?
Thanks & Regards,
Rock.

hi...
These kind of problem come into picture when you go for filling values in table control....
like filling in 20 number of lines on the screen when you can fill only 10 on the scrren.
so in such casees what you can do is
start recoding using SHDB
do operations and when it come to filling of table control
fill the first line with value and then use some option on the application tool bar to go to the next line
then fill the another line.
I was getting same problem as your but this way it was done perfectly and u can apply it at number of places.
or if you dont want to go for the lengthy process just record again and use option on tool bar of SHDB to generate a report for that
Edited by: Mohit Kumar on Feb 6, 2009 7:40 AM

RDP connection to remote host displays smaller resolution than the screen resolution

Having a problem with a surface with 8.1 installed. When connecting via Remote Desktop Connection to a remote host, the display is smaller than the display settings set for the desktop on the surface. If I change the Display settings for the
Surface, the display in the RDP session is still smaller.
I've tried changing the resolution settings for the connections under the display section of Remote Desktop Connection, but all that does is change the session to a window instead of full screen and does nothing to change the actual display size of the remote
session.
I believe this may be a function of DPI Scaling, but changing settings on the local surface display does nothing to change the behavior in the remote session.

Hi,
Sorry for my dilatory reply. Actually acctually to your descriptioin, I doubt whether this problem caused by Surface itself problem. It would be better to contact Surface Forum for further
assistance:
Surface Support:
http://answers.microsoft.com/en-us/surface
Roger Lu
TechNet Community Support

Screen Resolution in table control bdc

Hi ,
Im working on bdc table control using call transaction method for vk11 and mek1.While uploading data for vk11 for the first time it is taking all the records of the input file and if i do the same for the second time by changing the amount value it is taking only 24 records .(i.e if the input file contains only 24 records it wil update else if it has 25 records or more it not updating even single record and it is showing error " No batch input data for screen sapmv13A ..)...this issue is with the production server......................whereas in development and quality servers there is no problem....................
what migh be the problem and how to solve it?
can anyone plz help me on this

if its a problem in screen resolution then while recording through SHDB mark the check box default size
or
to make the bdc execute in standard screen size check the code below
data x_ctuparams type ctu_params.
x_ctuparams-defsize = 'X'. " This would freeze the resolution in any system
x_ctuparams-dismode = 'N'.
x_ctuparams-updmode = 'S'.
call transaction <TCODE> using it_bdcdata options from x_ctuparams.
So whatever is the screen size of the users front-end, the BDC will execute in standard screen size

Controlling Remote Session Screen Resolution

Similar Messages

Maybe you are looking for