Controlling volume in a Flash Slide Presentation

Hello,
I am working in Flash Slide Presentation mode. I have a
started a sound file playing on the "master" slide and I want it to
play throughout my entire presentation. However, on a couple of
slides, I want to play some short voice clips. How can I "turn down
the volume" a bit on the main sound file so as to hear the short
voice clips? And then turn it back up when the voice clip ends?
I understand basic Actionscript. Can anyone tell me the code
or point me to a tutorial which I can use to accomplish this?
Thanks in advance.

use a sound instance to create your background sound. and, how to control your flv sound depends on what you did to display your flv.

Similar Messages

Flash Slide Presentation...how to control volume?

Hello,
I am working in Flash Slide Presentation mode. I have a
started a sound file playing on the "master" slide and I want it to
play throughout my entire presentation. However, on a couple of
slides, I want to play some short voice clips. How can I "turn down
the volume" a bit on the main sound file so as to hear the short
voice clips? And then turn it back up when the voice clip ends?
I understand basic Actionscript. Can anyone tell me the code
or point me to a tutorial which I can use to accomplish this?
Thanks in advance.

Ah, I was tying the (unavailable ) controller number and I didn't see the pitch controller option spelled out in plain sight!

Flash Slide Presentation Format vs Flash File

I mistakenly made a fairly robust animation (15 layers about 5 min long with sound) in a Flash Slide Presentation document. The entire animation sits in slide number 1 (no other slides in this doucument). I need to take this animation out of the Slide Presentation mode an put it into a regular flash file because other applications are reading the presentation holder slide and not reading the animation. Is there a way to get rid of the "Presentation (parent) holder slide or do I need to copy the whole thing to another document? If so how do I do that? Thanks in advance for your help,

shift-click and drag across all the frames of your animation to select all the frames, then right click and click copy. go to a new swf and right click on a frame and click paste.

Flash Slide presentation and movieclip looping

Hi,
Im having a problem with the flash slide presentation. I have
on the main timeline of one of my slides a movieclip. When i play
the movie, the clip will loop endlessley. I would like the movie
clip to play just once. In a regular flash movie this would not be
a problem - i could put a stop action on the last frame of the
movieclip. but, doing that in the context of a flash slide freezes
the movieclip at the begining so it does not play at all..
help!

Ok, Ive managed to solve item 2. - if you set in the slide
component inspector - "playHidden=false" then the slide animation
will restart any time you reenter the slide. Im still lacking an
understanding of how to stop a motion tween from repeating itself
when it's contained within a movie clip as a motion tween timeline
cannot recieve fram actions apparently...

Flash Slide presentation - mouse wheel

Hi
Is it posible to custom flash slide presentation to respond to mouse wheel ?
can it move to next and previous scene by moving the mouse wheel?
Please advice

i am working in AS2

Please help -- Flash Slide Presentation

I've completed a Flash Slide Presentation (here at
work, which should be online right now). There are no nav buttons
displayed, but the left and right arrow buttons work when run
directly as a flash movie (test movie). As soon as I use the
published html file to load the movie, however, the arrow keys no
longer work, and I still see no nav buttons. Is the template bad?
I've read several tutorials on creating a slide presentation and
I've followed all the steps. I'm just beginning with action script,
so I'm obtuse about these things.
Thanks

It is hard to tell the problem by just your description. If
you could post your file it would be a great help. Only thing I can
suggest is looking for any stop(); actions in your timeline.
At the end of your movie if you don't use a stop(); action it
should loop forever.

How come querystring variables don't work with Flash Slide Presentations

How come querystring variables don't work with Flash Slide
Presentations
When I create a regular new Flash FLA and publish it I can
add a querystring to the file name in the object tag and get that
value back in the flash move like this:
myflashfile.swf?myname=andrew
But when I try the same thing using a new Flash Slide
Presentation with screen, it doesn't work.
Is there something I'm missing that I'm not aware of or does
the Flash Slide Presentation not support the use of querystrings?
I have tried this using a mix of PC and Mac with MX2004 Pro
and Flash 8 Pro.
Any reference links or ideas are much appreciated.
Thanks,
Andrew

Good info found here:
http://flashmx2004.com/forums/index.php?showtopic=971&hl=query

Flash slide presentation

Hey hi
I am trying to make a slideshow/movie with the slide
presentation feature. I use flash cs3 on a mac, but I don't think
that matters ?
I have put all my photos I am using onto into individual
slides. I have set cue points.
When i test it, nothing happens. It doesnt go to the next
slide.
I am trying to redo the opening on
mogullife.com but with more photos
and a different song. I have done exactly what I want done on a
keynote presentation, but when I export it to flash, the
transitions will not work, so I am here.
Can someone please point me in the right direction? You can
message me on here or on ichat or on myspace or email or call or
snailmail. Anything. I really wanted to do this soon.
Thank you in advance for any help.
samantha
myspace.com/samanthadarling

From your description, it sounds like you have each of these
5 screens
stacked one on top of the other, maybe each is in a different
layer,
maybe some other method.
It sounds like you are setting the alpha property of the
clips or the
individual elements to 0. If that's the case, then, yes, the
buttons
will remain active. If you change the visible property to
false, the
buttons will not be active.
Another method for showing this content would be to place
each screen's
content on a separate frame. So that you have only the
content that you
want on any given frame. Then you can navigate from frame to
frame
without concern for the other content.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

Navigating Flash Slide Show Presentation??

Hello,
I have an .SWF file which I created using the Flash Slide
Presentation document type. It consists of a number of screens. I
need to load this .SWF file into another Flash movie and control it
with actionscript, but I do not know the code. Could someone please
give me a hint at the code needed for simply getting this movie to
jump from one slide/screen to another? Or point me to a good
tutorial?
Thanks in advance.

was afraid of that... thanks you :-)
- greg
"Wolf van Ween" <[email protected]> wrote in
message
news:e6kg2k$qb5$[email protected]..
> Yes, would have been wiser. Slide show presentation
makes things a lot
> more complicated. Can be done, but requires a twisted
brain.

Flash CS4 - Slide presentation - instance name question

Is it possible to rename slides dynamically in a Flash presentation that is created using the Flash Slide Presentation template in Flash CS4. So, if I have a presentation with 50 slides and they are named 001 to 050 and I need to insert a slide between slide 010 and 011 is there a way to have Flash renumber them or do I have to just manually rename.

You might do better to use an array to manage the ordering of things--storing references to the slides in the array. That way you don't have to be chasing names to make them follow some scheme. You can still use names to help define where things go brain-wise, but having them listed in an array allows you to slip in new things without having to rename anything... just use the array/index to target the objects rather than the actual names.

How can I Access the Flash "Slide class" using flex and ActionScript 3?

Hi,
I hope someone can help me solve a problem...
I'm using the flex SwfLoader to load a flash side
presentation as follows...
<mx:SWFLoader id="ss_slides" source="ss_slides.swf"
width="320" height="240"/>
I would like to access the flash "Slide Class" using flex so
I can make the following call...
Slide.gotoNextSlide();
Anyone know how I can do that?
Would it be through the SwfLoader Object?
Is there another way?
F.Y.I. Here is a snippets about the Slide class from the
Flash 8 help...
Using the Slide class (Flash Professional only)
You use the methods and properties of the Slide class to
control slide
presentations you create using the Screen Outline pane for a
Flash Slide
Presentation, to get information about a slide presentation
(for example, to
determine the number of child slides contained by parent
slide), or to navigate
between slides in a slide presentation (for example, to
create "Next slide" and
"Previous slide" buttons).
You can also use the built-in behaviors that are available
in the Behaviors
panel to control slide presentations. For more information,
see Adding controls
to screens using behaviors (Flash Professional only) in Using
Flash.
Thanks,
Chris S.

Hi Chris,
You cannot access the methods of the Flash 8 movie from Flex.
And you can't do it the other way around either.
The only way to communicate is to create a LocalConnection on
each side.
M.

CS3 bug? Copy and paste to Slide Presentation

Using CS3 in a standard AS2 Flash file,
When doing:
Select all;
Copy Frames;
Then pasting in a new empty Flash Slide Presentation, with
the exact same stage size, in Frame 1 of Slide 1using:
Paste Frames;
All of the newly pasted contents are offset, as if the center
is at the top left of the Stage. This
Is this a bug, or am I missing something?
- C

Report issues here:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
<--check this
*Must Read*
http://www.smithmediafusion.com/blog
"Cadevous" <[email protected]> wrote in
message
news:f3h9l0$l4f$[email protected]..
> Using CS3 in a standard AS2 Flash file,
>
> When doing:
> Select all;
> Copy Frames;
>
> Then pasting in a new empty Flash Slide Presentation,
with the exact same
> stage size, in Frame 1 of Slide 1using:
> Paste Frames;
>
> All of the newly pasted contents are offset, as if the
center is at the
> top
> left of the Stage. This
>
> Is this a bug, or am I missing something?
>
> - C
>

Auto numbering a slide presentation

I have a slide presentation created and I am trying to figure
out how to auto number the slides and display on the presentation.
I am new to actionscript and have hit a roadblock, i.e.,
can't find any tutorials etc.
Does anyone have any suggestions on how to accomplish this?
thanks

Well, I created the presentation using the Flash Slide
Presentation document.
What I had envisioned was creating a dynamic text field on
the parent slide that would display the page number. Then I wanted
to use some actionscript that would increment the page number
up/down when the user clicks on the next page/previous page
navigation buttons.
I have not had any luck finding examples other than how to
create bookmarks that are SCORM compliant. I am not at that point
yet, just want a simple page number scheme.
thanks

Cs3 slide presentation convert to html5 in cs6

I've made several websites in Flash CS3 with a Flash slide presentation on a Windows 7 platform. Now i wish to convert them in Flash CS6 to html5 with toolkit for createJS. I recieve the following notice: Documents with slides and forms by this Flash version is not supported. Open this document in an earlier version. Is there anyone who can help me with this problem because i really want to convert my slide presentation to html5 , otherwise the sites are not visable on a Apple i-phone or i-pad. Thank you. Nikolien from the Netherlands

Thank you for your answer. Is there any way to publish my cs3 slide presentation with actionscript 3?
I've manage to convert such a slide presentation to html 5 with toolkit for createJS but that file contained only one slide.
Maybe is there a possibility to create one slide from a file that contains several slides?
Or are you saying that there is no way to convert this slide presentation to html5 at all?
With regards
Nikolien

Problem controlling Flash Slide Show

I would like to use a static image to control a flash slide
show; in which clicking the image would start the preloader and the
slide show at the same time. I have just inserted a flash slide
show which immediately preloads and starts the slide show when the
webpage is loaded. I have inserted a large play button image and
assigned the proper behavior attributes to try and control the
slide show without any success. Here is the webpage:
http://www.ronusa.com/buick_grand_national.htm
Please see the attached code for the slide show. Any help
would be greatly appreciated.

Thanks Ned. When I say slide I mean instead of a scene. There is a presentation and then the slide under it. If I click on the presentation it has one key frame and I think that is what's playing when I try to import the swf into a video editing program or try to export to a quicktime movie. Its like it never plays the slide, just the presentation which has nothing but the one key frame. When I play just the swf it does fine, but I can't export it to a quicktime movie.
The design of the slide is just text, jpgs and music transitioning in and out.
My intention is to import a movie into youtube. For some reason a swf does not import very well. So that is why I wanted to convert the swf to a movie. Thanks again for your help.
Mike.

Controlling volume in a Flash Slide Presentation

Similar Messages

Maybe you are looking for