Conversion used for displaying trade mark symbol in abap reports

One issue came Trademark symbolu2122 I have to print in that labelu2026. itu2019s a report. I want to know the hexadecimal value (conversion value) to print that symbol in reportu2026.using zebra printer I donu2019t know abt the zebra printer ,I have to give the correct conversion value in that prgu2026u2026u2026..i gave the value 2122 and later 99 I used but they r telling that stil v didnu2019t getting that TM symbol in their outputu2026u2026u2026..
Could anyone help me out . please

Thanks for your reply
The version is JRC
It would not be feasible to upgrade at this moment, we are already in production and need a solution for showing infinity in PDF.
Can you suggest something using crystal formulas could be possible or any other solution please .

Similar Messages

  • Interaction enabled on dimensional columns though not marked as Use for display

    I am facing issue with few of the dimensional columns in OBI 11g. Drill down property is enabled for few columns which are not marked as Use for Display or added to any hierarchy level.
    Clicking on these columns is drilling down to the next lower lever. we can avoid this by setting a system wide defaults but not allowed to do that.
    Any other suggestions to overcome the issue?

    Any dimensional attribute column residing on a higher level of aggregation will automatically render the drill-down to its next lower-level child.
    "Use for display" defines the attribute(s) displayed by default after a drill and is used to populate the property of the (default) displayed presentation column in a presentation hierarchy.
    So you are experiencing standard, desired behaviour. Removing that interaction will necessitate setting system-wide defaults.

  • Need to have Trade mark symbol in email's subject line

    Hi All,
    We need to have a trade mark symbol like Googleu2122 in the subject line for an email. I am generating the subject line by using plain text.
    could you please let me know, how to insert trade mark symbol in the subject line

    Hi Satya,
    Please go through this link.
    Handle Trade Mark Sign in message
    trademark character
    Check whether it helps you or not.
    Edited by: Lakshman N on Nov 26, 2009 2:39 PM

  • How to get the material list displayed in CU50 transaction into ABAP report

    How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
    I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
    But I want only the material list displayed in CU50.

    Could you please tell us how you found a solution to your problem?
    Thanks & regards

  • Table used for displaying print/program name of smartforms

    Hi All,
    I need the table name which is used to display the print/program name for smartforms.
    Thanks & Regards,

    check TNAPR , or tcode NACE .

  • Which add-on should I use for displaying Page Rank?

    Please tell me the add-ons that I can use for letting me know the Page Rank of a website.
    Google PR and Alexa PR is needed.
    Thank You

    Have you tried [ SEO Status PageRank/Alexa Toolbar] ? I don't know of Google PR...sorry!

  • Reg : trade mark symbol(TM) in SAP Script output

    Hi gurus,
    i am using SAP Script to print a material description , when i tried to run the sript in debugging mode it is showing as trandemark symbol as(TM) but in output ( i.e in printing ) i am getting this value as # . for example if i material description is xxx(TM) , then in debugging it is showing as xxx(TM) , but while printing it is showing the value as xxx(#).how to overcome this . please help me on this.
    Thanks and regards,

    [Double Byte Characters in SAP |]

  • Can Mavericks be used for display xwindows

    I have virtual machine with linux. Need to install  oracle SW which requires xwindows. Can you use mavericks like I use exceed, Humming bird in windows
    If yes please let me know how can I do it.

    Thanks for your reply. I have installed it, but do not know how to use with linux.  Basically X11 output of linux needs to be displayed.   In linux i can set the DISPLAY parameter and output is shown in remote machine with exceed  sw.
    I have no idea what to do in apple.

  • Can I choose which season artwork is used for display over the whole TV show?

    I have a TV show with multiple seasons and multiple album covers, but iTunes chooses one to display over the whole show list that I don't like. Is there some way to choose which season cover is displayed over my whole show, you know, WITHOUT changing all the album artworks of all the episodes?

    LaunchPad-Control was very useful to do exactly what you want on OS X Lion the developer has stated that there are problems when running on Mountain Lion and will not provide any support.
    Your only option now is to create folders with related applications.  Click on an application in Launchpad then drop it onto another thus creating a folder then rename the folder to something meaningful.

  • What are people using for displays?

    I just got my MacPro a couple of days ago. I'm currently surviving with a 4+ year old Dell 2001 FP monitor that can do at max 1600x1200.
    I have a MacBookPro 17 which can do 1920x1200. I'd like to at some point upgrade this older Dell monitor to something a little crisper that has a bit more resolution.
    I don't think I need a gigantic cinema type display either. I'd just like a little more resolution. I also went with ONLY the ATI Radeon HT 2600 XT.
    So what can I get which would look a little better and have a few more pixels? Recommendations?

    I use a Dell 2408WFP, which is one of the Ultrasharp models. It's good, but not great. If money was no object I would've picked an Eizo of similar dimensions. But it is very crisp and bright, so much so I set it to 0/100 brightness, and 60/100 contrast - according to the directions given by my Colormunki calibrator software. I couldn't get the Dell calibrated using my previous GretagMacbeth i1 Display (v.1), which was giving me neon colors instead of accuracy. It (i1 Display) had worked just fine with my CRTs, but not the 2408WFP.

  • Trade Mark symbol

    Hey everyone,
    We are transforming from an IDOC to a XML, we have suddenly faced an issue with the TM symbol. It doesnt seem to parse the symbol the way it is suppossed to be. In the MFL file we have the codepage for that field as UTF-8. I am a little confused as to how should i continue with this going forward.
    Any assistance regarding this and at the earliest will be highly appreciated.

    Edited by: 3360 on Apr 21, 2010 1:45 PM

  • How can I restore the background color Firefox 13 used for displaying images?

    I preferred the darker background color introduced in Firefox 13 for when images were displayed standalone, as opposed to the glaring white. How can I restore that behavior?

    That should still happen.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    You can also check for a userChrome.css file with code to change the background color.
    The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.

  • Which iView should be used for displaying XML forms?

    Hi All,
      I have created 3 xml forms.
       1.Edit form
       2.RenderList form
       3.Show form
    So How do I embedd them into iViews?
    Thanks in advance,

    HI Jasmine,
    I am not sure if this will help u but u can try this :
    Go to :-
    System Administration -> System Configuration -> Knowledge Management (This is on the left hand side pane) -> Content Management -> Form Based Publishing -> Forms Availability.
    Here in the list of all the Forms that u will see,double click on the form App_All_Public(its a hypelink).
    This will open up the Form details below the list.
    Click on the Edit Button.
    In the textBox for "Forms to Include", enter the project name of the form that u created in XML Form Builder.
    Click on SAVE button to save ur change.
    Now go to ur page and check the links.
    It should show u only the link of the form u want to include for ur user.

  • The TADIR entry for Program name is missing in ABAP report

    I created an  User group , Infoset  & ABAP query, generated a report with the help of ABAP Query.
    However when I did the extended syntax check for the same i got the fatal error.
    "The TADIR entry for <Program name> is missing
    (Message cannot be hidden using comment)"
    Could you please let me know why the above error is being given & how we can remove the same.
    Vinay Pasalkar

    Moved to ABAP General, thanks for pointing this out. In the future you can use the yellow triangle on the top right of each message to report such cases, they will be taken care of.

  • How to open a Trade Promotion from an ABAP report/program?

    Hello SDN Community,
    i try to open a spezific Trade Promotion to read an addional customized time_period field in a a badi. I have the promotion guid and i played around with mkt_element_read but the additional time fields are not included/transfered.
    How can i do that?
    Thanks in advance, tom

    Hi Tom.
    Did you get something on this?
    Can anybody help to solve this issue?
    Thanks in advance!!

Maybe you are looking for

  • HT3702 how to cancelled a purchased order because of negligence?

    To whom it may concern. I have a problema with this transaction in apple iTunes store. Here is the problem I have my iPhone and its with my wife and my son in the Philppines. I dont know if he purchase accidentally all this games and apps without kno

  • SOAP sync to RFC - Multiple lines in the RFC 'input'

    Hello everyone! I need a little 'insight help'/opinion. I had a cenario that was working just fine, SOAP Async to iDoc. In the cenario I received 1:n lines and send it to the iDoc. No problem at all. Now,  the analyst asked us to change this cenario

  • Since 10.0.9 FCPX crashes at "Import Media"

    Hi, it never happend before, the problem has shown up after i updated fcpx. I tried to import my footage, it´s from a panasonic hmc 151. 1080/50i, AVCHD. I never had a problem before. It was always the some work around. Open FCPX, insert SD-Card into

  • How do you host your external videos for good interactive PDF playback? Recommendation needed.

    I'm trying to find out a good solution for adding externally hosted video content to an interactive PDF. I understand that Vimeo/YouTube is out so I'm hoping to host content with a dedicated (payed service) video host. Does anyone have a recommendati

  • F4 Search option not available through webgui / Tr. iView

    We have NW Portal 7.31 and ECC 6 ehp 6 in our Landscape. We have created a transaction iview so that some portal users can create sales order (VA01) using Portal. This tr. iview uses webgui in the backend. But pressing F4 to choose values in various