Convert multiple rows of internal table into one row of internal table
Hi everyone,
I have an internal table of structure
Objid - Sobid
1 - A
1 - B
1 - C
1 - D
2 - a
2 - b
Now I have to show this in ALV format
Objid - Sobid1- Sobid2 -Sobid3 -Sobid4 -Sobid5
1 - A - B - C - D
2 - a - b
Kindly help me it's urgent.
bye
Hi sandip,
sorry i make a mistake. I have not seen that you will have it in ALV.
Try this an use itab1-txt in your alv:
DATA: BEGIN OF ITAB OCCURS 0,
OBJID(1),
DUMMY(1) VALUE '-',
SOBID(1),
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
txt(20),
END OF ITAB1.
ITAB-OBJID = '1'. ITAB-SOBID = 'A'. APPEND ITAB.
ITAB-OBJID = '1'. ITAB-SOBID = 'B'. APPEND ITAB.
ITAB-OBJID = '1'. ITAB-SOBID = 'C'. APPEND ITAB.
ITAB-OBJID = '1'. ITAB-SOBID = 'D'. APPEND ITAB.
ITAB-OBJID = '2'. ITAB-SOBID = 'a'. APPEND ITAB.
ITAB-OBJID = '2'. ITAB-SOBID = 'b'. APPEND ITAB.
LOOP AT ITAB.
AT NEW OBJID.
if sy-tabix <> 1. append itab1. clear itab1. endif.
itab1-txt = ITAB-OBJID.
ENDAT.
AT NEW SOBID.
concatenate itab1-txt ITAB-DUMMY ITAB-SOBID into itab1-txt.
ENDAT.
ENDLOOP.
append itab1.
loop at itab1. write: / itab1-txt. endloop.
Regards, Dieter
Similar Messages
-
Convert multiple rows in a table into one row based on the primary key
I have 2 tables
CREATE TABLE Files (FileID int, fileName varchar(20))
insert into Files values (1,'F1')
insert into Files values (2,'F2')
insert into Files values (3,'F3')
CREATE TABLE Versions (FileID int, VersionNum varchar(10))
insert into Versions values (1, 'V1')
insert into Versions values (1, 'V2')
insert into Versions values (1, 'V3')
insert into Versions values (2, 'V1')
The two tables join using FileID. I want a listing of the fileName and the all corresponding versions on one line. There may not be a version for a file or there may be multiple versions for the file. The output I want is
F1, V1, v2, v3
F2, V1
F3
Any help would be appreciated.
lggardner,
If you want them as different columns, you can PIVOT. However, this requires to know the max numebr of versions that may be there (here I have done with 3). If you dont have that info, then you might have to resort to dynamic SQL..
;with cte
as
select f.fileid,f.fileName,ISNULL(v.VersionNum,'') as VersionNum,row_number() over(partition by f.fileid order by f.filename,v.versionnum) rownum from #files f
left join #versions v
on f.fileid=v.fileid
select fileid,fileName,ISNULL([1],'') as [1],ISNULL([2],'') as [2],ISNULL([3],'') as [3]
from
select * from cte
) tab
PIVOT
Max(VersionNum) for rownum in ([1],[2],[3])
) pvt
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
How to join two internal table rows in alternative manner into one internal table?
How to join two internal table rows in alternative manner into one internal table?
two internal tables are suppose itab1 & itab2 & its data
Header 1
Header 2
Header 3
a
b
c
d
e
f
g
h
i
Header 1
Header 2
Header 3
1
2
3
4
5
6
7
8
9
INTO itab3 data
Header 1
Header 2
Header 3
a
b
c
1
2
3
d
e
f
4
5
6
g
h
i
7
8
9Hi Soubhik,
I have added two additional columns for each internal table.
Table_Count - It represents the Internal Table Number(ITAB1 -> 1, ITAB2 -> 2)
Row_Count - It represents the Row Count Number, increase the row count value 1 by one..
ITAB1:
Header 1
Header 2
Header 3
Table_Count
Row_Count
a
b
c
1
1
d
e
f
1
2
g
h
i
1
3
ITAB2:
Header 1
Header 2
Header 3
Table_Count
Row_Count
1
2
3
2
1
4
5
6
2
2
7
8
9
2
3
Create the Final Internal table as same as the ITAB1/ITAB2 structure.
"Data Declarations
DATA: IT_FINAL LIKE TABLE OF ITAB1. "Final Internal Table
FIELD-SYMBOLS: <FS_TAB1> TYPE TY_TAB1, "TAB1
<FS_TAB2> TYPE TY_TAB2. "TAB2
"Assign the values for the additional two column for ITAB1
LOOP AT ITAB1 ASSIGNING <FS_TAB1>.
<FS_TAB1>-TABLE_COUNT = 1. "Table value same for all row
<FS_TAB1>-ROW_COUNT = SY-TABIX. "Index value
ENDLOOP.
"Assign the values for the additional two column for ITAB2
LOOP AT ITAB2 ASSIGNING <FS_TAB2>.
<FS_TAB2>-TABLE_COUNT = 2. "Table value same for all row
<FS_TAB2>-ROW_COUNT = SY-TABIX. "Index value
ENDLOOP.
"Copy the First Internal Table 'ITAB1' to Final Table
IT_FINAL[] = ITAB1[].
"Copy the Second Internal Table 'ITAB2' to Final Table
APPEND IT
LOOP AT ITAB2 INTO WA_TAB2.
APPEND WA_TAB2 TO IT_FINAL.
ENDLOOP.
"Sort the Internal Table based on TABLE_COUNT & ROW_COUNT
SORT IT_FINAL BY ROW_COUNT TABLE_COUNT.
After sorting, check the output for IT_FINAL Table, you can find the required output as shown above.
Regards
Rajkumar Narasimman -
Best approach to join multiple statistics tables into one
I have read different approaches to join multiple statistics tables into one, they all have a column "productobjectid".
I want to get all data for each product and put it to excel and output a jpg statistic with cfchart.
How would you do this, the sql part?
Thanks.A couple suggestions:
1) when joining tables, its best to list both table/fields that you are joining in the FROM clause:
FROM shopproductbehaviour_views INNER JOIN shopproductbehaviour_sails ON shopproductbehaviour_views.productobjectid = shopproductbehaviour_sails.productobjectid
2) You add tables to a SQL join by placing another join statement after the SQL above:
SELECT *
FROM TableA INNER JOIN TableB on TableA.myField = TableB.myField
INNER JOIN TableC on TableA.anotherField = TableC.anotherField
3) If you have columns in the tables that are named the same, you can use column aliases to change the way they appear in your record set:
SELECT TableA.datetimecreated 'tablea_create_date', TableB.datetimecreated 'tableb_create_date'
4) Certainly not a requirement, but you might want to look into using <cfqueryparam> in your where clause:
WHERE shopproductbehaviour_sails.productobjectid = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#all.productobjectid#">
You might want to consider checking out one of the many tutorials on SQL available online. Many of the questions you posed in your post are covered in pretty much every basic SQL tutorial. Alternately, a good SQL book is worth its weight in gold for a beginning web applications developer. -
Export multiple tables into one flat file
I have data in multiple tables on a processing database that I need to move up to a production database. I want to export the data into a flat file, ftp it to the production server and have another job pick up the file and process it. I am looking for
design suggestions on how to get multiple tables into one flat file using SSIS?
Thank You.Hey,
Without a bit more detail, as per Russels response, its difficult to give an exact recommendation.
Essentially, you would first add a data flow task to your control flow. Create a source per table, then direct the output of each into an union all task. The output from the union all task would then be directed to a flat file destination.
Within the union all task you can map the various input columns into the appropriate outputs.
If the sources are different, it would probably be easiest to add a derived column task in-between the source and the union all, adding columns as appropriate and setting a default value that can be easily identified later (again depending on your requirements).
Hope that helps,
Jamie -
How can i add two table into one internal table
I WANT TO ADD THIS TWO DIFFERENT TABLE INTO ONE INTERNAL TABLE PLEASE HELP.
TABLES: J_1IEXCHDR, J_1IEXCDTL.
SELECT * FROM J_1IEXCHDR WHERE STATUS = 'P'.
WRITE: / J_1IEXCHDR-LIFNR,
J_1IEXCHDR-DOCNO,
J_1IEXCHDR-EXYEAR,
J_1IEXCHDR-BUDAT.
SELECT * FROM J_1IEXCDTL WHERE TRNTYP = J_1IEXCHDR-TRNTYP
AND DOCYR = J_1IEXCHDR-DOCYR
AND DOCNO = J_1IEXCHDR-DOCNO.
WRITE: / J_1IEXCDTL-EXBAS,
J_1IEXCDTL-EXBED,
J_1IEXCDTL-RDOC1,
J_1IEXCDTL-ECS.
ENDSELECT.
ENDSELECT.
THANKS IN ADVANCED.U have to link these 2 tables like this
<b>SELECT
J_1IEXCHDR~DOCNO
FROM J_1IEXCHDR inner join J_1IEXCDTL
on J_1IEXCHDRDOCYR = J_1IEXCDTLDOCYR
WHERE STATUS = 'P'.</b>
this is sample code only, and u have to check the F.key relationship.
Regards
Prabhu -
Combining multiple rows into one row
Hi all.
My most humble apology for this question but solutions in previous threads did not seem to help much.
Apparently, my account has not been verified and I am currently at home with no access to the SQL code so i can't post the actual code.
We have this (mockup) of code
Select S.C1, AViewSS.Study, AViewSS.SlotName, IST.TakenByDate, IST.ScannedByTime, SE.TimepointCalculation
From IST
INNER JOIN
AViewSS ON IST.GroupID = AViewSS.GroupID and
IST.SlotID = AViewSS.SlotID
INNER JOIN
S ON AViewSS.StudyID = S.StudyID
INNER JOIN
SE ON IST.Line = SE.Line and IST.SubLine = SE.SubLine and
AViewSS.ScheduleID = SE.ScheduleID
WHERE
(IST.GroupID = 92) and (IST.SlotID between 1791 and 1795)
and (AViewSS.VisitID = 137)
The query currently returns this result set
Col 1 Col 2 Taken Date Date 1 Date 2 Date 3
Scanned DateTime
Data Data 3/12/2015 3/12/2015 7:22
3/12/2015 7:22
Data Data 3/12/2015 3/12/2015 8:47
3/12/2015 8:47
Data Data 3/12/2015
3/12/2015 9:27 3/12/2015 9:27
Data Data 3/22/2015 3/22/2015 7:27
3/22/2015 7:27
Data Data 3/22/2015
Data Data 4/12/2015
Data Data 4/12/2015
Data Data 4/12/2015
You’ll notice that rows 1, 2, 3 are related as are rows 4, 5 and rows 6, 7, 8.
This is what we ultimately want to see given the results above.
In the report, rows 1, 2, 3 from the results should roll into one row with the ScannedByTimeStamp from each row returned by the query populating the appropriate report time column based on the value of a column in the row.
Col 1 Col 2 Taken Date Date 1 Date 2
Date 3
Data Data 3/12/2015 3/12/2015 7:22 3/12/2015 8:47 3/12/2015 9:27
Data Data 3/22/2015 3/22/2015 7:27
Data Data 4/12/2015
We would appreciate any guidance.Hi Duane,
The table and matrix data regions can display complex data relationships by including nested tables,matrices, lists, charts and gauges. Tables and matrices have a tabular layout and their data comes from a single dataset, built on a single data source. The
key diference between tables and matrices is that tables can include only row groups, where as matrices have row groups and columns groups.
All Code in this sample are downloadable from
this URL
create procedure spMultiple
as
begin
declare @Mytable table ([Col 1] varchar(20),[Col 2] varchar(20),[Taken Date] varchar(20),[Date 1] varchar(20),[Date 2] varchar(20),[Date 3] varchar(20))
Insert into @Mytable ([Col 1],[Col 2],[Taken Date],[Date 1],[Date 2],[Date 3])
select * from
Select 'Data' as [Col 1],'Data' as [Col 2],'3/12/2015' as [Taken Date],'3/12/2015 7:22' as [Date 1],'' as [Date 2],'' as [Date 3]
union all
Select 'Data' as [Col 1],'Data' as [Col 2],'3/12/2015' as [Taken Date],'' as [Date 1],'3/12/2015 8:47' as [Date 2],'' as [Date 3]
union all
Select 'Data' as [Col 1],'Data' as [Col 2],'3/12/2015' as [Taken Date],'' as [Date 1],'' as [Date 2],'3/12/2015 9:27' as [Date 3]
union all
select 'Data' as [Col 1],'Data' as [Col 2],'3/22/2015' as [Taken Date],'' as [Date 1],'3/22/2015 7:27' as [Date 2],'' as [Date 3]
union all
select 'Data' as [Col 1],'Data' as [Col 2],'3/22/2015' as [Taken Date],'' as [Date 1],'' as [Date 2],'' as [Date 3]
union all
select 'Data' as [Col 1],'Data' as [Col 2],'4/12/2015' as [Taken Date],'' as [Date 1],'' as [Date 2],'' as [Date 3]
union all
select 'Data' as [Col 1],'Data' as [Col 2],'4/12/2015' as [Taken Date],'' as [Date 1],'' as [Date 2],'' as [Date 3]
union all
select 'Data' as [Col 1],'Data' as [Col 2],'4/12/2015' as [Taken Date],'' as [Date 1],'' as [Date 2],'' as [Date 3]
) as temp;
with Mytable2(
[Col 1],
[Col 2],
[Taken Date],
[Date],
[NameDate]
as
SELECT
[Col 1],
[Col 2],
[Taken Date],
[Date],
[NameDate]
FROM
(SELECT
[Col 1],
[Col 2],
[Taken Date],
[Date 1],
[Date 2],
[Date 3]
FROM
@MyTable) as p
UNPIVOT
[Date] FOR [NameDate] IN ([Date 1],[Date 2],[Date 3])
)AS unpvt
group by
[Col 1],
[Col 2],
[Taken Date],
[Date],
[NameDate]
Select * from Mytable2 t1 where [date]<>''
end
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Ricardo Lacerda -
How to consolidate 4 internal table into one
how can we consolidate data from
two or more internal tables into one
please help
its a bit uegent
thanks in advanceHi,
If you want to combine two internal table,you can follow 2 approaches.
Case1: If both the internal table are of same structure,
append lines of itab1 to itab2.
The above statement will append all the records in itab1 to itab2.
Case2:If both the internal table are of differnt structure,
you need one or more common fields in the two tables to connect.
loop at itab1.
move-corresponding itab1 to itab.
loop at itab2 where f1 = itab1-f1.
move-corresponding itab2 to itab.
append itab.
clear : itab2, itab.
endloop.
clear itab1.
endloop.
Now itab will hold the entries from itab1 and itab2. -
Importing 30 tables into one SQL Table (Help Required)
Dear Experts,
I am new in SQL server, actually i need to gather 30 different excel file in one sql server table and i have imported all excel file in different databases, all tables have 186 different columns and datatypes. I couldnt change data type while conversion.
Now all columns have different data type which are occupying extra space in my database.
Now the problem is that i need to convert all databases into one database or table. Although i have created a table but i dont have idea how to import all table into one table and defining datatype in new table while importing the old tables.
Please help me in this matter or if any body has skype or any other chatting id please do let me know so that i may explain it better.
Thanking you in advance.
Best Regards,
SQL_beginnerThere are several things you can try. If you have SSIS, take a look at this.
http://www.singhvikash.in/2013/06/ssis-how-to-load-multiple-excel-files.html
https://www.simple-talk.com/sql/ssis/importing-excel-data-into-sql-server-via-ssis-questions-you-were-too-shy-to-ask/
Also, if your files have virtually the same name, like files with dates in the name, you can loop through files in your folder, and increment the loop with each run through.
DECLARE @intFlag
INT
SET @intFlag
= 1
WHILE (@intFlag
<=30)
BEGIN
PRINT @intFlag
declare @fullpath1
varchar(1000)
select @fullpath1
= '''\\path to your files\'
+ convert(varchar,
getdate()- @intFlag
, 112)
+ '_your-text-file-name.txt'''
declare @cmd1
nvarchar(1000)
select @cmd1
= 'bulk insert [dbo].[your-table-name] from '
+ @fullpath1 +
' with (FIELDTERMINATOR = ''\t'', FIRSTROW = 2, ROWTERMINATOR=''0x0a'')'
exec (@cmd1)
SET @intFlag
= @intFlag + 1
END
GO
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Combining like results into one row
The statement below works. However when the results are returned there are multiple values returned for the same "Period" that I would like to see returned into one row.
SELECT "Request ID", "External Customer", "Staff Prof Id", "Period", "Planned External", "Actual External", "Planned Internal", "Actual Internal", "Total Planned", "Actual Total"
FROM (
SELECT ppl.request_id "Request ID", ppl.mdpr_bds_ext_customer "External Customer", cells.staff_prof_id "Staff Prof Id", period.period_short_name "Period", CELLS.PLANNED_FTE/100 "Planned External", CELLS.actual_fte/100 "Actual External", 0 "Planned Internal", 0 "Actual Internal", /*skills.skill_name,*/ total.plan_total_fte/100 "Total Planned", total.actual_total_fte/100 "Actual Total"
FROM RML.MREQ_MDPR_PROJ PPL, knta.krsc_staff_prof_line_cells_v CELLS, knta.krsc_staff_prof_lines_v LINES, knta.knta_periods PERIOD, knta.krsc_skills_v SKILLS, knta.krsc_staff_prof_period_sum TOTAL
where PPL.MDPR_BDS_SUB_PROJ IS NOT NULL AND PPL.KNTA_STAFFING_PROFILE = CELLS.STAFF_PROF_ID(+) AND cells.staff_prof_line_id = lines.staff_prof_line_id AND ppl.knta_staffing_profile = total.staff_prof_id
AND cells.period_id = period.period_id AND lines.skill_id = skills.skill_id AND skills.skill_name like '%External%' AND total.period_id = period.period_id
UNION
SELECT ppl.request_id "Request ID", ppl.mdpr_bds_ext_customer "External Customer", cells2.staff_prof_id "Staff Prof Id", period.period_short_name "Period", 0 "Planned External", 0 "Actual External", CELLS2.planned_fte/100 "Planned Internal", CELLS2.actual_fte/100 "Actual Internal", /*skills.skill_name,*/ total.plan_total_fte/100 "Total Planned", total.actual_total_fte/100 "Actual Total"
FROM RML.MREQ_MDPR_PROJ PPL, knta.krsc_staff_prof_line_cells_v CELLS2, knta.krsc_staff_prof_lines_v LINES, knta.knta_periods PERIOD, knta.krsc_skills_v SKILLS, knta.krsc_staff_prof_period_sum TOTAL
where PPL.MDPR_BDS_SUB_PROJ IS NOT NULL AND PPL.KNTA_STAFFING_PROFILE = CELLS2.STAFF_PROF_ID(+) AND cells2.staff_prof_line_id = lines.staff_prof_line_id AND ppl.knta_staffing_profile = total.staff_prof_id
AND cells2.period_id = period.period_id AND lines.skill_id = skills.skill_id AND skills.skill_name not like '%External%' AND total.period_id = period.period_id)
ORDER BY "Request ID"Probably you are looking at something like GROUP BY "Request ID", "External Customer", "Staff Prof Id", "Period" and SUM () the other columns. As Enrico says, examples of actual and desired output would be helpful.
At a glance a UNION of...
AND skills.skill_name LIKE '%External%'...and...
AND skills.skill_name NOT LIKE '%External%'...seems a slightly strange approach. -
Merging (Joining) two tables into one
Is it possible to merge two adjacent tables into one table in Pages? Also, how can you split one table into multiple tables?
If we use the exact meaning of the words, the response is no and no.
If we play a bit with the meanings we may do the trick.
(1) I create a table with 6 columns and 5 rows.
(2) select cells D1 …F5, copy, paste in the document but out of the table. We get the right half of the table.
From the tool bar, reduce the number of columns of table 1 fom 6 to 3. Bingo we have the two halves of the original table.
(3)Select the first half and increase the number of rows from 5 to 10
(4) copy the entire second half, select cell D1 in the enlarged table, paste.
Bingo, we have the merged table.
For sure, a merge and a split tables features would be welcome but as the table tool is the one used in the spreadsheet, I would be surprised if these features where introduced one day.
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'11
Yvan KOENIG (VALLAURIS, France) jeudi 22 avril 2010 17:28:48 -
Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.
You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.
-
How to fill the data of two different tables into one?
Hi Experts,
I have two tables named CDHDR and CDSHW(structure). I have extracted the data from these two tables through two function modules named CHANGEDDOCUMENT_HEADER and CHANGEDOCUMENT_POSITION. Now I have the data in to different tables.
These two tables neither has relationship with each other through any field nor have any field which exist in both. Can anyone tell me in this case what should be the process to take the data of both the tables into one table. How can I match the record of one table to another?
thanks a ton in advance.
Edited by: Moni Bindal on Apr 28, 2008 4:16 PM
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:42 PMHye Bindal,
without a relation, it is not possible to club the data of 2 internal tables. More over it depends on the requirement as to y u should club to non related quantities in an internal table.
if you wish to do so, one thing is it has internal table which includes the strucute of the 2.
data: begin of ty_out,
first type first_structure,
second type second_structure,
end of ty_out.
data: itab type standard table of ty_out.
data: wa type ty_out.
loop into it1 into wa1.
move corresponding wa to wa1.
append wa to itab.
endloop.
loop into it2 into wa2.
move corresponding wa to wa2.
append wa to itab.
endloop.
now the internal table itab will have all the contents of it1 and it2.
<REMOVED BY MODERATOR>
Thanks,
Imran.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:43 PM -
How to combine many rows into one row
Hi all,
I have a question regarding to how to combine many rows into one row?
My result set is like that:
ITEM_NO NAME1
11 abc
11 cde
11 fg
Want to combine them into
ITEM_NO NAME1
11 abc;cde;fg
would anybody can tell me how to do that? Thanks
RayYou can check this --
satyaki>
satyaki>
satyaki>create table t
2 as
3 select 11 ITEM_NO, 'abc' NAME1 from dual
4 union all
5 select 11 ITEM_NO, 'cde' NAME1 from dual
6 union all
7 select 11 ITEM_NO, 'fg' NAME1 from dual;
Table created.
satyaki>
satyaki>
satyaki>
satyaki>set lin 10
satyaki>
satyaki>desc t;
Name Null? Type
ITEM_NO NUMBER
NAME1 VARCHAR2(3)
satyaki>
satyaki>
satyaki>set lin 1000
satyaki>
satyaki>
satyaki>
satyaki>SELECT ITEM_NO,
2 LTRIM(MAX(SYS_CONNECT_BY_PATH(NAME1,';'))
3 KEEP (DENSE_RANK LAST ORDER BY curr),';') AS NAME1_DET
4 FROM (SELECT ITEM_NO,
5 NAME1,
6 ROW_NUMBER() OVER (PARTITION BY ITEM_NO ORDER BY NAME1) AS curr,
7 ROW_NUMBER() OVER (PARTITION BY ITEM_NO ORDER BY NAME1) -1 AS prev
8 FROM t)
9 GROUP BY ITEM_NO
10 CONNECT BY prev = PRIOR curr AND ITEM_NO = PRIOR ITEM_NO
11 START WITH curr = 1;
ITEM_NO NAME1_DET
11 abc;cde;fgRegards.
Satyaki De. -
Convert the all the quantity units into one Unit of measure that is 'CSE'.
Hi all,
I want to convert the all the quantity units into one Unit of measure that is 'CSE'.
would anybody tell me what is the FM that converts all the quantity units into one Unit.
Thanks in advance,
MythilyHi Mythily,
You can check the following function module - -
FCO_CONVERT_FROM_BASE_UNIT
MD_CONVERT_MATERIAL_UNIT
MS_CONVERT_UNIT_TO_TIME
RV_CONDITION_CONVERT_UNITS
VHUMISC_CONVERT_TO_ALTERN_UNIT
VHUMISC_CONVERT_TO_BASEUNIT
WALL_QUANTITY_CONVERT_UNIT
WALL_QUANTITY_CONVERT_UNIT_RND
WSTP_CONVERT_UNIT
Regards
Pinaki
Maybe you are looking for
-
ADS : Soap runtime exception when using MEDRUCK_PO
Hello, I want to use standard PDF form MEDRUCK_PO instead of Sapscript MEDRUCK for editing PO for output type NEU. I have make changes in NACE for Application EF/Output type NEU : Program : SAPFM06P FORM routine : ADOBE_ENTRY_NEU PDF Form : MEDRUCK_
-
HELP!!
-
If I have only a day/month to insert under birthday in Address Book, I notice that appears the current year which I don't want, mainly people give a day not the year. How to go about it ? Can I use iCal for that or only Address Book and then is syncr
-
I have 17,000 photos that I view and use in iPhoto on my MacBook Pro. I would like to trade up to a MacBook Air. How do I handle my photos and keep adding to them?
-
We've made some changes to our home page in a quest to simplify it and to help you find things easier. If you encounter any difficulties, please do let us know. Thanks and back to your regularly scheduled programming :-) Al Sparber - PVII http://www.