Convert OIM single domain in a cluster domain

Hello All,
I have an OIM domain which was at first created as a single instance.
Can you provide high level steps to convert it to a cluster?
OIM 11.1.1.5
Weblogc 10.3.6
Thanks,
Adr

Hey Kevin,
What about if I bring my OIM non-cluster down.
Then I create another domain, a cluster this time, pointing to the same OIM database schema used by the non-cluster installation.
Then I'll bring the cluster domain up.
What are the chances this could work?
Thanks,
Adr

Similar Messages

OIM 11g installation failed: Error Restart domain step failed

Hi,
I'm stuck in OIM installation at the following point. Please help.
Here is the description of error:
Bootstrap Domain Configuration
Log
Config Action Bootstrap Domain Configuration started
Create Domain
Log
Create Domain
Step Create Domain started
Create Domain
Step Create Domain ended successfully
Create ODS Managed Server
Log
Create ODS Managed Server
Step Create ODS Managed Server started
Create ODS Managed Server
Step Create ODS Managed Server ended successfully
Create OIF Managed Server
Log
Step Create OIF Managed Server started
Step Create OIF Managed Server ended successfully
Stop Managed Server
Log
Stop Managed Server
Step Stop Managed Server started
Stop Managed Server
Step Stop Managed Server ended successfully
Apply Java Required Files
Log
Step Apply Java Required Files started
Step Apply Java Required Files ended successfully
Apply EM Template
Log
Step Apply EM Template started
Step Apply EM Template ended successfully
Restart Domain
Error
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Restart Domain failed
Log
Step Restart Domain started
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Restart Domain failed
Following is the description from the log file: C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-15_02-17-54AM.log
[2012-06-15T04:21:41.828-07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JVjWcgOFs1WFLz7U8A1FqjrQ00000A,0]
[2012-06-15T04:21:41.828-07:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JVjWcgOFs1WFLz7U8A1FqjrQ00000A,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startStopServersAndApps(WorkFlowExecutor.java:830)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:483)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:1105)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Thanks in advance for help.
Thanks,
Prasad Shinde

Your problem sounds somewhat like mine, although not exactly. In my case it seems as if my CD/DVD drive didn't like the hologram on my Windows XP install CD. I solved this by using Disk Utility to make a disk image of the Windows DVD and then burning the disk image onto a new DVD with an opaque "label". That solved that problem.
A further problem occurred after that. When I got to the screen that told me to hit "Enter" to start the installation process my keyboard was unresponsive. I solved this by buying a cheap Windows keyboard. That solved that problem and I now have Windows XP running just fine.
I think that you'll find that Apple tech support isn't very responsive to these sort of problems. I don't have Apple Care but was willing to pay my $49 for tech support. I ended up talking to a "Boot Camp specialist". He was polite but told me that it was "a windows problem" and that Apple didn't support Windows. I agree that Apple can't support windows but it seemed like my two problems were "Mac problems". Anyway, after tearing my hair out for 4 days I finally got it done. I have to admit that I'm not happy with apple tech support.

Cluster nodes discover peers outside cluster domain

All, cross-posted from the ColdFusion Server Administration
forum:
I've run into an issue with CFMX7 clustering on a subnet with
multicast disabled. In our configuration, we have two physical
Windows Server 2003 Enterprise Edition servers hosting nine
ColdFusion MX 7 Enterprise clusters. Each server hosts one of two
instances in a cluster. i.e.:
server1 [1.2.3.4] - instance1-1 <- cluster1 -> server2
[1.2.3.5] - instance1-2
server1 [1.2.3.4] - instance2-1 <- cluster2 -> server2
[1.2.3.5] - instance2-2
server1 [1.2.3.4] - instance3-1 <- cluster3 -> server2
[1.2.3.5] - instance3-2
server1 [1.2.3.4] - instance4-1 <- cluster4 -> server2
[1.2.3.5] - instance4-2
server1 [1.2.3.4] - instance5-1 <- cluster5 -> server2
[1.2.3.5] - instance5-2
server1 [1.2.3.4] - instance6-1 <- cluster6 -> server2
[1.2.3.5] - instance6-2
server1 [1.2.3.4] - instance7-1 <- cluster7 -> server2
[1.2.3.5] - instance7-2
server1 [1.2.3.4] - instance8-1 <- cluster8 -> server2
[1.2.3.5] - instance8-2
server1 [1.2.3.4] - instance9-1 <- cluster9 -> server2
[1.2.3.5] - instance9-2
My first step in enabling peer discovery was to add the
unicastPeer attribute to the ClusterManager service under each
instance.
e.g. jrun.xml on instance1-1:
<service class="jrunx.cluster.ClusterManager"
name="ClusterManager">
<attribute name="bindToJNDI">true</attribute>
<attribute name="enabled">true</attribute>
<attribute
name="clusterDomain">cluster1</attribute>




<attribute name="unicastPeer">1.2.3.5</attribute>
<service class="jrunx.cluster.ClusterDeployerService"
name="ClusterDeployerService">
<attribute
name="deployDirectory">{jrun.server.rootdir}/SERVER-INF/cluster</attribute>
<attribute name="deactivated">false</attribute>
</service>
</service>
e.g. jrun.xml on instance1-2:
<service class="jrunx.cluster.ClusterManager"
name="ClusterManager">
<attribute name="bindToJNDI">true</attribute>
<attribute name="enabled">true</attribute>
<attribute
name="clusterDomain">cluster1</attribute>




<attribute name="unicastPeer">1.2.3.4</attribute>
<service class="jrunx.cluster.ClusterDeployerService"
name="ClusterDeployerService">
<attribute
name="deployDirectory">{jrun.server.rootdir}/SERVER-INF/cluster</attribute>
<attribute name="deactivated">false</attribute>
</service>
</service>
. . . and so on for each instance and cluster. This is where
the problem begins. When I start the instances, every instance
discovers every other instance as a cluster peer, regardless of
cluster domain.
Another forum user suggested using host:port, where port is
the JNDI listening port. That doesn't work. Using the Jini
listening port, however, does work, e.g.:
<attribute
name="unicastPeer">1.2.3.4:4160</attribute>
That presents another problem. The Jini listening port
defaults to 4160. If 4160 is taken, a port is chosen at random.
I can't find documentation on setting a static Jini listening
port, if that's even the correct action to take.
Thoughts?
From what I can tell, the version of Reggie (the Jini lookup
service) shipped with JRun only supports setting the unicast
listening port programmatically. Reggie is started by
jrunx.cluster.ClusterManager.init--actually, the private method
startLookupService--and JRun doesn't appear to ever call Reggie's
setUnicastPeer method.
Assuming we can't tweak Reggie, I guess a more appropriate
question is how do we get JRun's RMI service (?) to honor
groups/domains in a call to getPeers? I'll cross-post to the JRun
forums and investigate JRun Updater 6.
Trev

. . . and it appears I'm exposing my ignorance of Jini in
general. :-)
If I now understand the Jini discovery process correctly, a
multicast request includes one or more service IDs and one or more
groups. The registrar will respond if and only if its service ID is
not in the request and its group memberships exactly match one or
more of the groups in the request.
A unicast request includes nothing more than the protocol
version, and the registrar will respond as if a valid multicast
request had been received.
In both cases, the response packet includes a marshalled copy
of the ServiceRegistrar object and the names of all groups of which
the registrar is a member.
Without looking at more of JRun, I'm guessing that in some,
if not all cases, either JRun's discovery implementation assumes
that any response from a unicast query is valid, regardless of the
server IDs or group names received, or the logic that sorts out the
response isn't 100% correct.

OIM 11g configuration failed. Create domain step failed

Hi,
I'am facing problem in OIM installation. Here is the description of error :
Create Domain step failed
Bootstrap Domain Configuration
Log
Config Action Bootstrap Domain Configuration started
Create Domain
Error
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
Log
Create Domain
Step Create Domain started
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
The log file (C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-07_03-49-05PM.log) showed the following message :
[2012-06-07T16:10:46.953+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->24938fb1-a72a-427a-b318-a098773c53f6 StatusMsg:Starting Domain.
[2012-06-07T16:10:46.953+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] reportStartConfigAction: EXIT........
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0]
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
[2012-06-07T17:49:23.328+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@8ae380
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
Thanks in advance for help.
Thanks and Regards,
Prasad
Edited by: 938380 on Jun 7, 2012 5:52 AM

actually when i restarted the configuration the test passed for create domain but it went on to fail in the apply java required file step
here is the link to the thread : OIM 11g configuration failed. Apply java required files step failed
Hoping for your help.. and thanks for the suggestions..
Regards,
Prasad

Trusted certificate expired when starting cluster domain

          I follow the instructions in doc to create one cluster domain with 2 managed servers,
          one proxyServer, then I found out the trusted certificate error, is that I must
          get the trusted certificate from BEA? I use the weblogic server 8.1 downloadable
          from bea site.


Hi,
Verify that the correct trusted CA certificate and keystore are being used.
http://e-docs.bea.com/wls/docs81/messages/Security.html#BEA-090088
Regards,
Prasanna Yalam

Change of domain for the cluster nodes

Hi,
We need to change our existing domain i.e. NT domain to windows 2003 domain for the SAP production server cluster nodes.
There are 2 nodes. They are in active active mode.
Windows 2000 advanced server is installed in the nodes.
Can anybody tell us that during the change of the domain what else we need to take care or what should be correct procedure for this so that database & application does not have any impact
Eagerly waiting for the reply
With best regards
Joydeep

I would NOT do that.
What immediately comes to my mind is:
- users need to be recreated in the new domain
- filesystem owners and permissions of all SAP and database directories must be changed
- permissions on registry keys must be changed
- owner/permissions of the files in the cluster filesystem must be changed
There is no easy way of doing this. Depending on the database that is used more things are necessary. If you don't exactly know, where which application has files, it will certainly be troublesome.
The safest way would be to use a different hardware and do a homogeneous system copy by reinstalling the cluster in the new domain.
Markus

Cluster domain config - newbie question

Hi,
I need to configure a clustered domain on Host1 and Host2 with one managed_server1 on Host1 and one managed_server2 on Host2.
I followed the steps outlined below but ended up with both managed servers running on Host1 rather then managed_server1 running on Host1 and managed_server2 running on Host2. Can someone please clarify the right procedure for me.
1. I installed the software on both Host1 and Host2.
2. From Host1 ran the config.sh to create a domain.
3. While creating a domain I created an admin server to run at Host1:7001 and one managed_server1 to run at Host1:7003.
At the same time I also did create a cluster with cluster address as Host1:7003,Host2:7003.
Also created machines Host1, Host2. Assigned admin server and managed_server1 to machine Host1.
Finished with the domain.
4. Started node managers on both servers, started the admin server, then from the admin server console
I created another managed_server2 which I assigned to Host2 and the cluster that I created in step 3,
started both managed servers from the console.
My question is - now both my managed servers are running on Host1 and on Host2 I only have the node manager process.
Is this correct? Because my domain directory under user_projects is located on Host1, nothing on Host2,
in fact I even don't have user_projects directory on Host2. Should I copy the directory structure (user_projects/domains/<my_domain>) to Host2 manually?
Thank you
Anatoliy

Hi Anatolly
There are some discrepencies in the way you created cluster for the Env you want. Here are brief outline steps. Will give the full link at the bottom.
1. Install SAME version of Weblogic Server on both the machines Machine1 and Machine2. Note that it should be the same version absolutely.
2. On Machine1, Create a Cluster Domain. At the time of creation select customize option. Create 2 Managed Servers MS1 and MS2. Give the machine IP adddress or dns names for each ms1 and ms2 where they are gonna run. You can use the same port, since they are running on different machines. Ofcourse you will have one Admin Server assuming its on Machine1 itself. Create only ONE cluster and in next screen add both ms1 and ms2 to this cluster. You can have any number of clusters. Bur for your usecase, you need only one cluster with 2 managedservers. Admin server is NOT part of cluster.
3. Now you have a Clustered domain with AdminServer and MS1 on Machine1 and MS2 that should run on Machine2. MS1 and MS2 are part of cluster
4. Within Machine1, run a command called pack (see below link for details). This will create a .jar file with the name you specify during pack command.
5. copy the above .jar file to other Machine2. Run unpack command on this other machine. Now you will have MS2 created on other machine.
You can always start adminserver and ms1 (first managed server) on machine1 using normal startweblogic and startmanagedweblogic commands. On other machine run startmanagedweblogic and give that server name which is ms2.
You do not need Node manager by default. Incase if you want to start/stop ms2 server running on other machine from main master machine MS1, then you need to configure node manager etc.
http://download.oracle.com/docs/cd/E12840_01/common/docs103/confgwiz/examples.html#wp1089614 (Creating a Domain with Managed Servers and Clusters)
http://download.oracle.com/docs/cd/E12840_01/common/docs103/pack/tasks.html (How Do I Create and Start a Managed Server on a Remote Machine?)
HTH
Ravi Jegga

High Availability for Existing Single Exchange Server holding Multiple Domains

Hi,
I'm trying to implement solution for Backup/Redundancy/High-availability for the existing Exchange Server 2013.
Currently the Exchange Server 2013 deployed on 2012 Server is holding 4 Domains (1 internal domain & 3 public/published domains). The Exchange Server is hosted Internally & published to send & receive mails from the SMTP relay(Third party
resides on internet) server. Client Access & Mailbox Services are on the same server.
Please advice me which is the best scenario to implement a backup/redundancy/high-availability for the current server.
Thanks in advance.
Regards
Roopesh S

Hi,
The following links will help.
High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638137(v=exchg.150).aspx
Deploying High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638129(v=exchg.150).aspx
Planning for High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.150).aspx
Backup, Restore, and Disaster Recovery
http://technet.microsoft.com/en-us/library/dd876874(v=exchg.150).aspx
ecsword

Rconfig: converting a single instance to RAC instance

Hi,
I am trying to use the "rconfig" utility to convert a single instance to a RAC instance in an existing RAC cluster.
I have modified the .xml file, and am trying to run the conversion from the 1st node in the 2 node cluster (where the single instance resides).
The only error message i seem to be getting is below:
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
ORCL_DATA_ORCLCLN The specified diskgroup is not mounted.
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
Now I dont really understand why I would be getting that message as the instance is up and running and ASM disk group is mounted on node1 at the time i run the rconfig command, though its not clear to me if I also need to somehow mount the ASM disk group on the second node prior to running the rconfig command??
node1:
bash-3.00$ asmcmd -p
ASMCMD [+] > lsdg
State Type Rebal Unbal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Name
MOUNTED EXTERN N N 512 4096 1048576 10181 7442 0 7442 0 ORCL_DATA_ORCLCLN/
node2:
ASMCMD [+] > lsdg
State Type Rebal Unbal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Name
I have attached the output of the alert log during the rconfig conversion of the target database, but it all looks pretty standard to me (keep in mind i am an oracle novice!).
alert.log
Completed: ALTER DATABASE OPEN
Thu Jul 23 13:51:55 2009
Shutting down instance (abort)
License high water mark = 2
Instance terminated by USER, pid = 15030
Thu Jul 23 13:51:57 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 e1000g1 10.128.113.0 configured from OCR for use as a cluster interconnect
Interface type 1 e1000g0 10.128.113.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/10.2.0/db_1/dbs/arch
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 121634816
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 440401920
control_files = +ORCL_DATA_ORCLCLN/control01.ctl
db_block_size = 8192
__db_cache_size = 306184192
compatible = 10.2.0.2.0
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = FALSE
cluster_database_instances= 1
db_recovery_file_dest_size= 2147483648
norecovery_through_resetlogs= TRUE
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain = netapp.com
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/admin/orcldb/bdump/ORCLCLN
user_dump_dest = /u01/app/oracle/admin/orcldb/udump/ORCLCLN
core_dump_dest = /u01/app/oracle/admin/orcldb/cdump/ORCLCLN
db_name = ORCLCLN
open_cursors = 300
pga_aggregate_target = 145752064
Cluster communication is configured to use the following interface(s) for this instance
10.128.113.200
Thu Jul 23 13:51:59 2009
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=15085
DIAG started with pid=3, OS id=15091
PSP0 started with pid=4, OS id=15094
LMON started with pid=5, OS id=15097
LMD0 started with pid=6, OS id=15102
MMAN started with pid=7, OS id=15112
DBW0 started with pid=8, OS id=15114
LGWR started with pid=9, OS id=15116
CKPT started with pid=10, OS id=15125
SMON started with pid=11, OS id=15128
RECO started with pid=12, OS id=15130
CJQ0 started with pid=13, OS id=15134
MMON started with pid=14, OS id=15143
MMNL started with pid=15, OS id=15146
Thu Jul 23 13:52:03 2009
lmon registered with NM - instance id 1 (internal mem no 0)
Thu Jul 23 13:52:04 2009
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Thu Jul 23 13:52:04 2009
ALTER DATABASE MOUNT
Thu Jul 23 13:52:04 2009
Starting background process ASMB
ASMB started with pid=17, OS id=15157
Starting background process RBAL
RBAL started with pid=18, OS id=15169
Thu Jul 23 13:52:09 2009
SUCCESS: diskgroup ORCL_DATA_ORCLCLN was mounted
Thu Jul 23 13:52:13 2009
Setting recovery target incarnation to 2
Thu Jul 23 13:52:13 2009
Successful mount of redo thread 1, with mount id 4437636
Thu Jul 23 13:52:13 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Thu Jul 23 13:52:14 2009
ALTER DATABASE OPEN
Thu Jul 23 13:52:14 2009
Beginning crash recovery of 1 threads
Thu Jul 23 13:52:14 2009
Started redo scan
Thu Jul 23 13:52:14 2009
Completed redo scan
105 redo blocks read, 32 data blocks need recovery
Thu Jul 23 13:52:14 2009
Started redo application at
Thread 1: logseq 2, block 929
Thu Jul 23 13:52:15 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 2 Reading mem 0
Mem# 0 errs 0: +ORCL_DATA_ORCLCLN/redo_2_1.log
Mem# 1 errs 0: +ORCL_DATA_ORCLCLN/redo_2_0.log
Thu Jul 23 13:52:15 2009
Completed redo application
Thu Jul 23 13:52:15 2009
Completed crash recovery at
Thread 1: logseq 2, block 1034, scn 613579
32 data blocks read, 25 data blocks written, 105 redo blocks read
Thu Jul 23 13:52:15 2009
Thread 1 advanced to log sequence 3
Thread 1 opened at log sequence 3
Current log# 1 seq# 3 mem# 0: +ORCL_DATA_ORCLCLN/redo_1_1.log
Current log# 1 seq# 3 mem# 1: +ORCL_DATA_ORCLCLN/redo_1_0.log
Successful open of redo thread 1
Thu Jul 23 13:52:15 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Thu Jul 23 13:52:15 2009
SMON: enabling cache recovery
Thu Jul 23 13:52:17 2009
Successfully onlined Undo Tablespace 1.
Thu Jul 23 13:52:17 2009
SMON: enabling tx recovery
Thu Jul 23 13:52:17 2009
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=21, OS id=15328
Thu Jul 23 13:52:23 2009
Completed: ALTER DATABASE OPEN
Any help would be greatly appreciated!!!!

Ok,
So I managed to get the disk group mounted on the second node, and re-ran the rconfig process.
I got a little further, but encountered another error which is displayed below:
-bash-3.00$ rconfig racconv.xml
<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
/u01/app/oracle/product/10.2.0/db_1/dbs Data File is not shared across all nodes in the cluster
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
I am not using a shared oracle home, each node in the cluster has its own oracle installation residing on local disk. Is a shared oracle home a pre-requisite for usin rconfig?
I have provided the .xml file I am using below:
-bash-3.00$ cat racconv.xml
<?xml version="1.0" encoding="UTF-8"?>
<n:RConfig xmlns:n="http://www.oracle.com/rconfig"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/rconfig">
<n:ConvertToRAC>

<n:Convert verify="YES">

<n:SourceDBHome>/u01/app/oracle/product/10.2.0/db_1</n:SourceDBHome>

<n:TargetDBHome>/u01/app/oracle/product/10.2.0/db_1</n:TargetDBHome>

<n:SourceDBInfo SID="ORCLCLN">
<n:Credentials>
<n:User>oracle</n:User>
<n:Password>password</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:SourceDBInfo>

<n:ASMInfo SID="+ASM1">
<n:Credentials>
<n:User>oracle</n:User>
<n:Password>password</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:ASMInfo>

<n:NodeList>
<n:Node name="sol002"/>
<n:Node name="sol003"/>
</n:NodeList>

<n:InstancePrefix>ORCLCLN</n:InstancePrefix>

<n:Listener port=""/>

<n:SharedStorage type="ASM">

<n:TargetDatabaseArea></n:TargetDatabaseArea>

<n:TargetFlashRecoveryArea></n:TargetFlashRecoveryArea>
</n:SharedStorage>
</n:Convert>
</n:ConvertToRAC>
</n:RConfig>

Best Practice when deploying a single mdb into a cluster

At a high level, we are converting all of our components to Weblogic processes that use Stateless Session Beans and Message Driven Beans. All of the weblogic processes will be clustered, and all of the topic queues will be distributed (Uniform Distributed Topics / Queues).
          We have one component that is a single MDB reading from a single queue on 1 machine. It is a requirement that the JMS messages on that queue be processed in order, and the processing of messages frequently requires that the same row in the DB be updated. Does anyone have any thoughts on the best design for that in our clustered environment?
          One possible solution we have come up with (not working):
          Possible Solution 1: Use a distributed topic and enforce a single client via client-id on the connection factory, causing a single consumer.
          1.Deploy a uniform-distributed Topic to the cluster.
          2.Create a connection factory with a client-id.
          3.Deploy a single FooMDB to the cluster.
          Problem with Solution 1: WL allows multiple consumers on Topic with same client-id
          1.Start (2) servers in cluster
          2.FooMDB running on Server_A connects to Topic
          3.FooMDB running on Server_B fails with unique id exception (yeah).
          4.Send messages - Messages are processed only once by FooMDB on Server_A (yeah).
          5.Stop Server_A.
          6.FooMDB running on Server_B connects automatically to Topic.
          7.Send messages - Messages are processed by FooMDB on Server_B (yeah).
          8.Start Server_A
          9.FooMDB successfully connects to Topic, even though FooMDB on Server_B is already connected (bad). Is this a WL bug or our config bug??
          10.Send messages - Messages are processed by both FooMDB on Server_A and Server_B (bad). Is this a WL bug or our config bug??
          Conclusion: Does anyone have any thoughts on the best design for that in our clustered environment? and if the above solution is doable, what mistake might we have made?
          Thank you in advance for your help!
          kb

Thanks for the helpful info Tom.
          Kevin - It seems that for both the MDB, and the JMS provider, there are (manual or scripted) actions to be taken during any failure event + failure probes possibly required to launch these actions...?
          In the case of the JMS provider, the JMS destination needs to be migrated in the event of managed-server or host failure; if this host is the one that also runs the Admin server then the Admin server also needs to be restarted on a new host too, in order that it can become available to receive the migration instructions and thus update the config of the managed server which is to be newly targetted to serve the JMS destination.
          In the case of the MDB, a deployment action of some sort would need to take place on another managed-server, in the event of a failure of the managed server or the host, where the original MDB had been initally deployed.
          The JMS Destination migration actions can be totally avoided by the use of another JMS implementation which has a design philosophy of "failover" built into it (for example, Tibco EMS has totally automatic JMS failover features) and could be accessed gracefully by using Weblogic foreign JMS. The sinlge MDB deployed on one of the Weblogic managed servers in the cluster would still need some kind of (possibly scripted) redeployment action, and on top of this, there would need to be some kind of health check process to establish if this re-deployment action was actually required to be launched. It is possible that the logic and actions required just to establish the true functional health of this MDB could themsevles be as difficult as the original design requirement :-)
          All of this suggests that for the given requirement; the BEA environment is not well suited; and if no other environment or JMS provider is available at your site, then a manipulation of process itself may be required to enable it to be handled in a highly-available way which can be gracefully administered in a Weblogic cluster.
          We have not discussed the message payload design and the reasons that message order must be respected - by changing the message payload design and possibly adding additional data, this requirement "can", "in certain circumstances", be avoided.
          If you can't do that, I suggest you buy a 2 node Sun Cluster with shared HA storage and use this to monitor a simple JMS client java program that periodically checks for items on the Queue. The Tibco EMS servers could also be configured on this platform and give totally automatic failover protection for both process and host failure scenarios. With the spare money we can go to the pub.
          P.S. I don't work for Tibco or Sun and am a BIG Weblogic fan :-)

Convert from Evaluation Mode to Production (Cluster) Mode

Is there any documentation on how you can convert a single server VDI 3 evaluation mode server, to a clustered VDI environment.
Is it just doing a backup of the database in evaluation mode, and then doing a restore into the cluster once its up? Are there any other configuration files that need to be maintained as well?
Thanks

Hi,
Yes thats doable.
While configuring multihost setup.Run vda-config on all hosts(1 Primary(once) and two secondary) .On one of the secondary host you may restore the data.
In evaluation host
Execute /opt/SUNWvda/mysql/bin/ndb_mgm
at ndb_mgm prompt execute START BACKUP
Check if a directory "BACKUP" got created at the location "/var/opt/SUNWvda/mysql-cluster
Perform vda-conig -u,it should ask for restoring this backup
Run vda-config on all hosts(1 Primary(once) and two secondary)
Save the backup as /var/opt/SUNWvda/mysql-cluster/BACKUP in the secondary server.
Execute /opt/SUNWvda/mysql/bin/ndb_restore -b <backup #> -n <nodeid #> -r - - backup_path=<path> on the same host.
This should work.
AFAIR there are some known issues here.So you may also want to have a look at
http://wikis.sun.com/display/VDI3/Backing+Up+the+VDI+Configuration
--Chirag

How to convert from single instance to RAC?

Hi, I have one environment it is version is 10.2.0.4 in linux SUSE.
I decided to move this environment to 10.2.0.4 Real applicaiton cluster has two nodes in linux red-hat.
Firstly,
I install 10.2.0.1 rac on two new machine in linux red hat.
Then I upgrade my rac to 10.2.0.4 from 10.2.0.
Now I want to move the single instance to RAC,
Is there an anathoer way that different from export , import?

Besides the obvious Export-Import which do not want to consider (although it would be the neatest method !), look the 4th conversion scenario under paragraph D.3.2 "Single-Instance to RAC Conversion Scenarios" at
http://download.oracle.com/docs/cd/B19306_01/install.102/b14203/cvrt2rac.htm#BABFCAHF
The 4th conversion scenario is "Converting a single-instance Oracle Database 10g Release 2 (10.2) to an 10g Release 2 (10.2) RAC database, running out of a different Oracle home, and where the host where the single-instance database is running is not one of the nodes of the RAC database".
Reference section D of the "Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide 10g Release 2 (10.2) for Linux"
http://download.oracle.com/docs/cd/B19306_01/install.102/b14203/toc.htm

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

I recently signed up for a one month trial of adobe pro. I logged in. I cannot convert a single page of PDF file to word or Excel with this trial. I just get the request to sign up for a year. What good is the trial if I can't try it?

I recently signed up for a one month trial of adobe pro. I logged in. I cannot convert a single page of PDF file to word or Excel with this trial. I just get the request to sign up for a year. What good is the trial if I can't try it?

Hey vcomfort6,
Please ensure that you are using Adobe Acrobat and not Reader to convert PDF file to word or excel.
Could you tell me whether it is a scanned document? Does this happen with all PDFs or any specific one?
Do you get any error message? What exactly happens when you try doing the same?
Hope to hear from you.
Regards,
Anubha

Convert OIM single domain in a cluster domain

Similar Messages

Maybe you are looking for