Converting crystel Reports DIA to Background

Hi All ,
I have issue with crystal report; we are created a crystal report through SAPBI, these reports are running In DIA (Dialogue) in SAP BI. I want to convert this reports to Background, Is there any way???
Praveen Yagnamurthy

Hi,
You can run scheduled reports in Crystal Enterprise using SAPu2019s batch mode. The
InfoSet and Open SQL drivers can run reports using SAPu2019s batch or background
mode when specific environment variables are set to 1. The relevant environment
variables are:
u2022 CRYSTAL_INFOSET_FORCE_BATCH_MODE (for the InfoSet driver)
u2022 CRYSTAL_OPENSQL_FORCE_BATCH_MODE (for the Open SQL driver)
However, it is recommended that you use this feature only when you have a
distributed installation of Crystal Enterprise. When these environment variables
are set to 1, the drivers run reports using SAPu2019s batch mode, regardless of the
reporting component that is actually running the report. Therefore, if you create
these environment variables as system environment variables on a machine that is
running a combination of Crystal Enterprise servers, the drivers run all reports in
batch mode (including on-demand report requests from the Page Server and the
Report Application Server).
Ingo

Similar Messages

  • How can I convert a report/ ALV in PDF format?

    Can you tell me how can I convert a report or ALV in PDF format?
    Regards,
    Subhasish

    hi ,
    check this..
    *& Report  ZSPOOLTOPDF                                                 *
    *& Converts spool request into PDF document and emails it to           *
    *& recipicant.                                                         *
    *& Execution                                                           *
    *& This program must be run as a background job in-order for the write *
    *& commands to create a Spool request rather than be displayed on      *
    *& screen                                                              *
    REPORT  zspooltopdf.
    PARAMETER: p_email1 LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_sender LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_delspl  AS CHECKBOX.
    *DATA DECLARATION
    DATA: gd_recsize TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i.
    DATA: gd_subject   LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Write statement to represent report output. Spool request is created
    if write statement is executed in background. This could also be an
    ALV grid which would be converted to PDF without any extra effort
      WRITE 'Hello World'.
      new-page.
      commit work.
      new-page print off.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
    Alternative way could be to submit another program and store spool
    id into memory, will be stored in sy-spono.
    *submit ZSPOOLTOPDF2
           to sap-spool
           spool parameters   %_print
           archive parameters %_print
           without spool dynpro
           and return.
    Get spool id from program called above
    IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
        PERFORM convert_spool_to_pdf.
        PERFORM process_email.
        if p_delspl EQ 'X'.
          PERFORM delete_spool.
        endif.
        IF sy-sysid = c_dev.
          wait up to 5 seconds.
          SUBMIT rsconn01 WITH mode   = 'INT'
                          WITH output = 'X'
                          AND RETURN.
        ENDIF.
      ELSE.
        SKIP.
        WRITE:/ 'Program must be executed in background in-order for spool',
                'request to be created.'.
      ENDIF.
          FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
          FORM get_job_details                                          *
    FORM get_job_details.
    Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
          FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
          FORM process_email                                            *
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      CHECK gd_recsize > 0.
      PERFORM send_email USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
          FORM send_email                                               *
    -->  p_email                                                       *
    FORM send_email USING p_email.
      CHECK NOT ( p_email IS INITIAL ).
      REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Message Body text, line 1'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Message Body text, line 2...'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.
          FORM delete_spool                                             *
    FORM delete_spool.
      DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
      ld_spool_nr = gd_spool_nr.
      CHECK p_delspl <> c_no.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                spoolid = ld_spool_nr.
    ENDFORM.
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    regards,
    venkat.

  • Why do I get a status of 'waiting' when I run a report in the background

    Happy new Year Experts!!
    I am working with Ad-hoc query and I run reports in the background.  When I go to System > Own Spool Requests the status is always waiting.  When I go to SM37 the status is complete.  I can open the report from my own spools requests and it is completed.
    Thanks.
    Regards,
    Jeanette

    Go to SM36-> Own jobs - double click the job - Select Edit-Steps - DOuble click the step and check print specifications.
    Moreover, if you wanna make the job printed on finish, make sure that there is a default printer defined in SU3 - Defaults - Output device field.
    Regards,
    Dilek

  • How to Convert Simple Report into ALV...

    Hi All,
    i have developed Simple now  i want to convert this report in ALV grid Report.
    how can i do it please Help..
    my code is..
    REPORT  ZGSTT_YVENDORDTL_REPORT.
    Tables :ZMSEG,LFA1.
    DATA: BEGIN OF struct occurs 100,
    MBLNR Type ZMSEG-MBLNR,
    BLDAT Type ZMSEG-BLDAT,
    LIFNR Type ZMSEG-LIFNR,
    BOENR Type ZMSEG-BOENR,
    name1 type lfa1-name1,
    END OF struct.
    types: comm2(16) type c.
    data: itab like  LFA1 occurs 1 with header line.
    data: ind type i.
    selection-screen: begin of block b1 with frame title comm2.
       parameters: matno like ZMSEG-MBLNR.
    select-options: ORDERDAT for ZMSEG-BLDAT.
    selection-screen: end of block b1.
    INITIALIZATION.
    comm2 = 'Selection Screen'.
    start-of-selection.
    if matno is not initial and orderdat is not initial.
    select * from ZMSEG into corresponding fields of table struct where MBLNR = matno and bldat in orderdat.
    elseif matno is initial and orderdat is not initial.
    select * from ZMSEG into corresponding fields of table struct where  bldat in orderdat.
    elseif matno is not initial and orderdat is initial.
    select * from ZMSEG into corresponding fields of table struct where MBLNR = matno.
    else.
    select * from ZMSEG into corresponding fields of table struct.
    endif.
    select * from lfa1 into table itab.
    loop at struct.
      ind = sy-tabix.
      read table itab with key lifnr = struct-lifnr.
    if sy-subrc = 0.
       move itab-name1 to struct-name1.
      endif.
      modify struct index ind transporting  name1.
    endloop.
    SKIP TO LINE 5.
    WRITE:SY-VLINE,(5) 'NO',SY-VLINE,(12) 'Bill of Date',SY-VLINE,(30) 'Vendor Name',SY-VLINE,(20) 'Material Document No.',SY-VLINE,(10) 'Bill of No.',SY-VLINE.
    FORMAT COLOR OFF.
    loop at struct.
      write: / SY-VLINE,(5) count UNDER 'NO',SY-VLINE,(12) struct-BLDAT UNDER 'Bill of Date',SY-VLINE,(30) struct-name1 UNDER 'Vendor Name',SY-VLINE,(20) struct-MBLNR UNDER 'Material Document No.',SY-VLINE,(10) struct-BOENR UNDER 'Bill of No.',SY-VLINE.
    endloop.
    Thanks In Advance...
    Yunus

    Hi,
    You can write your ALV programs in 2 methods by making use of classes or by making use of reuse function modules.
    You can go through the following standard programs.
    BCALV_FULLSCREEN_DEMO
    BCALV_FULLSCREEN_DEMO_CLASSIC
    regards,
    Sangram

  • Converting simple report output to PDF print layout issue

    Hi all,
    I am converted one report output to PDF format, it is working fine in one DEV sever, but when we moved it to other server the layout of output preview & font size  is not coming properly (as same in DEV server)  in the new server. I am using the below code, please check & correct me if anything is wrong.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            copies                 = '1'
            cover_page             = space
            destination            = 'LOCL'
            expiration             = '1'
            immediately            = space
            mode                   = space
            new_list_id            = 'X'
            no_dialog              = 'X'
            user                   = sy-uname
            line_size              = 200
            line_count             = 65
    *        layout                 = 'Z_65_230'
            layout                 = 'X_58_170'
            sap_cover_page         = 'X'
          IMPORTING
            out_parameters         = mstr_print_parms
            valid                  = mc_valid
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF sy-subrc EQ 0.
    **--Creating Spool Request.
          CALL FUNCTION 'JOB_OPEN'
            EXPORTING
              jobname          = lv_job_name
            IMPORTING
              jobcount         = lv_job_count
            EXCEPTIONS
              cant_create_job  = 1
              invalid_job_data = 2
              jobname_missing  = 3
              OTHERS           = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
    **--Submitting the Report & Get the Output.
            SUBMIT  zpsr_submit_prcng WITH SELECTION-TABLE t_ebeln TO SAP-SPOOL WITHOUT SPOOL DYNPRO
                                  SPOOL PARAMETERS mstr_print_parms
                                  USER             sy-uname         " User for runtime authorizations
                                  VIA JOB          lv_job_name
                                  NUMBER           lv_job_count
                                  AND RETURN.
            IF sy-subrc <> 0.
              MESSAGE ID    sy-msgid TYPE sy-msgty NUMBER sy-msgno
                      WITH  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ELSE.
              CALL FUNCTION 'JOB_CLOSE'
                EXPORTING
                  jobcount         = lv_job_count
                  jobname          = lv_job_name
                  strtimmed        = 'X'
                IMPORTING
                  job_was_released = lv_job_released.
              IF sy-subrc <> 0.
                MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
              ENDIF.
    Thanks & Regards
    Avish
    Moderator Message: Please use code tags when pasting code snippets. Also paste relevant portions of the code
    Edited by: Suhas Saha on Jul 13, 2011 3:05 PM

    Dear Alexander,
    Thanks for the reply.
    In this I am using the FM 'CONVERT_ABAPSPOOLJOB_2_PDF'. I have checked the settings from SPAD that is also same in both servers for particular output device. But the patches are diffrennt in both the servers, the server from which layout is not coming properly having the high level patches in compare to the other server(which is working fine).

  • How can i convert oracle report in excel format using 8i

    hi,
    I want to convert oracle report in excel format using 6i reports. please give the solution with emp table.
    millons of thanks in advance.

    You'll have to use the destype DELIMITEDDATA to render your Report in CSV format. Then set the mime type to Excel. I don't know the exact syntax, so please do a search in metalink for "reports excel" for examples and more info.
    Regards,
    Martin Malmstrom

  • Problem to export a report (to PDF) after converting my reports to CR13

    I have an old project with reports developped using Crystal Reports for Visual Studio 2003 (.NET 1.1). I want to convert them so I can now use Crystal Reports for Visual Studio 2010 (with .NET 3.5).
    I installed Crystal Reports for VS2010 and I converted my reports to the new format. Unfortunately, one of my reports is not working anymore.
    My ASP.NET application generate the report and export it as a PDF. I use CrystalDecisions.CrystalReports.Engine.ReportDocument.Export().
    Everytime I run this method, an exception is thrown...
    System.Exception was unhandled by user code
      Message=System.Runtime.InteropServices.COMException (0x80041004):
    Mémoire insuffisante pour l'opération.
       à CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
       à CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
       à CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
       à CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
       à CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
       à CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
       à
      Source=GSPRapport
      StackTrace:
    I also tried to export the report (using PDF format) at design time with the "Export Report" button in Preview mode. It didn't work. But, I can export the report at design time using another format type (like XML).
    The old version of te report (using .NET 1.1, CR9) work fine. As I said, other reports in that same project work perfectly.
    Is someone have an idea of what's wrong!
    Thanks!
    Max.

    The most common cause of this problem is having very large detailed images, or lots and lots of images in your report. The Crystal Report engine changed a lot from 9.1 to 13. The big change was from 9.1 to 10 though when we started using the RAS InProc engine.
    The Crystal reporting engine is not efficient at handling the images and it can cause memory issues like you are seeing. As a test, try suppressing the images that show up frequently in your report and retry your export. If it works you'll have your answer and you'll need a new creative way to design your report without so many images.

  • SUBMIT REPORT AS A BACKGROUND JOB

    Hi all,
       I am executing one report in foreground in that report i want to submit one report which should be executed in background only. how it is possible to execute 2nd report in <b>background mode</b> only.
    Regards
    deepak

    This is the Basic code to Achieve that.
    Call Function 'JOB_OPEN'
    SUBMIT RSBDCBTC
    via background Job <Job info>
    With QIE = <QID Returned by BDC_OPEN_Group FM>
    AND RETURN.
    Call Function 'JOB_CLOSE'
    2) Also go through this
    DATA: lv_job_name         LIKE tbtco-jobname,
    lv_job_nr           LIKE tbtco-jobcount,
    lv_job_released     TYPE c,
    lv_job_start_sofort TYPE c,
    lv_print_parameters TYPE pri_params.
    lv_job_name = 'Z_BGPROGRAM'.
      CALL FUNCTION 'JOB_OPEN'
        EXPORTING
          jobname          = lv_job_name
        IMPORTING
          jobcount         = lv_job_nr
        EXCEPTIONS
          cant_create_job  = 1
          invalid_job_data = 2
          jobname_missing  = 3
          OTHERS           = 4.
      IF syst-subrc = 0.
    " submit job with all the selection screen params...
        SUBMIT (lv_job_name)
            WITH applfile = applfile " these are the parameters of the background program
            WITH p_lines = p_lines
            USER syst-uname " you must use this
           VIA JOB lv_job_name NUMBER lv_job_nr AND RETURN.
        IF sy-subrc = 0.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = lv_job_nr
              jobname              = lv_job_name
              strtimmed            = 'X'
            IMPORTING
              job_was_released     = lv_job_released
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              OTHERS               = 8.
          IF syst-subrc <> 0.
            MESSAGE i162(00) WITH
            'An error occured while closing the background job.'.
            STOP.
          ENDIF.
        ENDIF.
      ENDIF.
      SKIP 1.
      WRITE: / 'Background process', lv_job_name , 'called successfully' NO-GAP.
      WRITE: / 'You can check the job in transaction SM37'.
    Thanks

  • Schedule measurement in SE30 - running a report in the background

    Dear experts,
    I have a long running ABAP report and I will need to analyze its runtime for performance improvements.
    How may I correctly run this ABAP report in the background from SE30 (runtime analysis tool)? The report has to be run using a specific variant for its selection screen inputs as well.
    This is what I have done:
    1. Go to SE30
    2. Click on "For User/Service" button under "Schedule"
    3. Create new Schedule Measurement with the following details:-
      - User (<my user name>),
      - Client (<properly specified>),
      - External Session (Any),
      - Processing Category (Background Processing),
      - Object Type (Report),
      - Object Name (<ABAP report program name>),
      - Max. No. of Scheduled Measurements (1),
      - Expiration Date & Time (<properly specified>)
    5. In the screen "Overview of Scheduled Measurements", I have the following displayed as well:-
      - Scheduled = 1
      - Started = 0
      - Errors = 0
      - Status = Being processed
    Am I still on the right track here? (Started = 0 and there was no way I could specify the variant for the selection screen input values too)
    Please help. Appreciate any inputs at all.
    Thanks.

    Hi,
    you can try it with ST12 and the <ALL Servers> Option for tasktype B.
    see this blog:
    /people/hermann.gahm/blog/2010/03/22/st12-150-tracing-user-requests-tasks-http
    ST12 uses SE30 / ST05 behind the covers. But here you can switch on
    the trace for all servers and therefore don't have to take care for that yourself.
    Kind regards,
    Hermann

  • Run the Report as a Background job and Get the Output in Excel in Local PC

    Hello Gurus,
    I have one following requirement.
    One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
    Please provide some solution.
    Any helpful answer get surely awarded.
    Thanks a lot,
    Varlanir

    GUI_* WS_* Function In Background, CSV Upload
    GUI_* and WS_* function modules do not work in background
    When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
    At anytime, a user can switch of the Personal Computers even though the job is still running in the background.  Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer  file.
    To choose the correct download method to used, you can check the value of SY-BATCH in your code,
    if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
    *-- Open dataset for reading
    DATA:
      dsn(20) VALUE '/usr/test.dat',
      rec(80).
    OPEN DATASET dsn FOR INPUT IN TEXT MODE.
    IF sy-subrc = 0.
      DO.
        READ DATASET dsn INTO rec.
        IF sy-subrc <> 0.
          EXIT.
        ELSE.
          WRITE / rec.
        ENDIF.
      ENDDO.
    ENDIF.
    CLOSE DATASET dsn.
    *-- Open dataset for writing
    DATA rec(80).
    OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
      TRANSFER rec TO '/usr/test.dat'.
    CLOSE DATASET dsn.
    What is the difference when we use upload, ws_upload, gui_upload function modules?
    UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts.  ie., Batch Data Communication.
    Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3.  So , in these various Function Modules are used.
    UPLOAD---  upload a file to the presentation server (PC)
    WS_UPLOAD----    Load Files from the Presentation Server to Internal ABAP Tables.
    WS means Work Station.
    This is used upto SAP 4.6 version.
    GUI_UPLOAD-------    Replaces WS_UPLOAD. Upoad file from presentation server to the app server.  From 4.7 SAP version it is replaced.
    How to Upload csv file to SAP?
    Common File Download Upload Questions:
    How  you upload the data from text file to sap internal table?  From my knowledge its by upload or gui_upload. 
    How you download the data from sap internal table to text file?
    How  you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
    You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
    Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
    Use function module GUI_UPLOAD
    The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = 'C:\test.csv'
       FILETYPE                      = 'ASC'
      TABLES
        DATA_TAB                      = itab
    EXCEPTIONS
       FILE_OPEN_ERROR               = 1
       FILE_READ_ERROR               = 2
       NO_BATCH                      = 3
       GUI_REFUSE_FILETRANSFER       = 4
       INVALID_TYPE                  = 5
       NO_AUTHORITY                  = 6
       UNKNOWN_ERROR                 = 7
       BAD_DATA_FORMAT               = 8
       HEADER_NOT_ALLOWED            = 9
       SEPARATOR_NOT_ALLOWED         = 10
       HEADER_TOO_LONG               = 11
       UNKNOWN_DP_ERROR              = 12
       ACCESS_DENIED                 = 13
       DP_OUT_OF_MEMORY              = 14
       DISK_FULL                     = 15
       DP_TIMEOUT                    = 16
       OTHERS                        = 17.

  • Database is Locking While Priview the PLD converted Crystal report

    Hi All
    I converted a Purchase Order PLD into Crystal Report to design a PO according to user requirement in a TEST company
    and save this report physically and again I use this Converted Crystal Report as a  Layout in the TEST1 company on the Purchase Order.While priview the Purchase Order document it is working fine
    when this same layout is used in TEST2 and preview the document it asking the login details and same thing is happening in the other database TEST1 (in which Report is working fine)  also and i came to know that the all the databases are locked
    unlock the database and remove that layout from TEST2 database and again add same layout in the same database and  now i just open this layout through REPORT LAYOUT MANAGER and click edit button the report is opened in edit mode then also total sql server with user sa is locked and i didnt saw the company list at the start of the sap business one
    Can any one give the solution for this issue
    Thank you

    You may keep all original fields and move or hide fields to meet your customer's need. System field should not be removed.
    Thanks,
    Gordon

  • Creation of Spool for a Report Output in background.

    Hi Gurus,
    I am working on a Report and my requirement is that a Spool should be Generated for the Report Output in background. Instead of generating the spool manually, I need it to be generated in background.
    Please let me know ASAP.
    Regards,
    Amit.

    Get print parameters using 'GET_PRINT_PARAMETERS'.
      DATA : rep LIKE pri_params-plist,
    w_title TYPE tsp01-rqtitle,
    mstr_print_parms LIKE pri_params.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING destination           = 'LP01'
                  copies                = 1
                  list_name             = rep
                  list_text             = w_title
                  immediately           = 'X'
                  release               = 'X'
                  new_list_id           = 'X'
                  expiration            = 1
                  line_size             = 132
                  line_count            = 65
                  layout                = 'X_65_132'
                  sap_cover_page        = 'X'
                  cover_page            = ' '
                  receiver              = sy-uname
                  department            = 'System'
                  no_dialog             = 'X'
        IMPORTING out_parameters        =  mstr_print_parms
      valid = mc_valid.
    and then use submit statement-
      SUBMIT
      zp1012_ar_rep_vendstat
      TO SAP-SPOOL
      WITHOUT SPOOL DYNPRO
              SPOOL PARAMETERS mstr_print_parms
      WITH s_lifnr IN s_lifnr
      WITH p_bukrs eq p_bukrs
      WITH s_gjahr eq p_gjahr SIGN 'I'
      WITH s_monat BETWEEN p_per-low AND p_per-high SIGN 'I'
                       AND RETURN.
      COMMIT WORK.
    Regards,
    Aparna Gaikwad

  • How to convert the Report Builder output to .xls

    Dear All,
    Let me please know how to convert the Report Builder output to Excel Format.
    As there are having the facility to convert the output in .PDF or .HTML format but i want to convert that into Excel Sheet......
    Please Guide me in this regards
    Thanks in advance
    Regards,
    Vishal......

    Hello,
    If your question is about the format spreadsheet, it is not possible from Reports Builder :
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/output/output_a_simpleexcel.htm
    Restrictions
    It is not possible to generate spreadsheet output directly from Reports Builder. Instead, on the command line, you can run the report using rwrun or Reports Server clients (rwservlet, rwclient, rwcgi), with DESFORMAT=SPREADSHEET. You cannot store DESFORMAT=SPREADSHEET as a system parameter value in the report definition (.rdf file).
    Regards

  • Convert Web Report to PDF

    Hi all,
    I need a possibility to <b>convert Web Reports</b> designed in WAD <b>into PDF</b>. SAP help portal says: 'You access BEx Web applications and reports in the portal. You can then convert these into PDF files and print them.' (http://help.sap.com/saphelp_nw04s/helpdata/en/03/d8c041a227ca17e10000000a155106/frameset.htm)
    But I haven't found any documentation how to do this...could anyone please help me? Thanks in advance.
    Best regards,
    Dominik

    Hi Dominik,
    You will need to add a URL or button group to your template and use the command wizard to create the command ("Export Web Template"). You should be able to find more information in the SAP Help documentation for SAP NetWeaver 2004s, which I know you already have a link to.
    If you are on a ramp-up project, you should have access also to the Ramp-up Knowledge Transfer (RKT) in the SAP Service Marketplace at service.sap.com/rkt-netweaver. This site contains materials that explain the new features, including the new web items and the command wizard. If you don't have access, check with your SAP consultant for assistance.
    Regards,
    Katie Beavers
    SAP NetWeaver Product Management

  • How do you create a macro for Acrobat Convert Multiple Reports action in Microsoft Access

    I have several reports in microsoft access and I've been able to combine them into a single PDF file using the Acrobat Convert Multiple Reports feature. Is there a way to create a macro for this action? I would like to create a time event for this procedure.
    Any help I get on this is greatly appreciated.
    Thanks

    CTPetEng,
    Since this question is not related to CreatePDF, but rather to Acrobat, I'm moving your question to the Acrobat forum.
    Dave

Maybe you are looking for

  • Standard Report for displaying reason for action

    Hi Expets, Is there a standard report which displays the action and its reason for the action. eg.. ACTION - Direct Highering       Reason- New Position Kaustubh.

  • Re-collecting and Transporting in ECC after system copy

    Dear Friends, I have a situation where i had enhanced a datasource with some Z fields in ECC DEV and had transported them to ECC QA a while ago . Now the basis did a system copy from ECC PRD to ECC QA recently and all my transports are no longer in t

  • After update all PDF files are added to iTunes

    After updating to OS X 10.10 iTunes started to add all my PDF documents to its library. Is this happening to anyone else? Does anyone know how I can stop this from happening?

  • Reinstall os x without install disk or recovery

    Hi guys! So I just got this imac g4 from my neighbor and thought I'd have some fun. os x was doing fine, but there isn't a computer in our house without linux on it. only installed linux on one other imac, but that was a differen't version with no de

  • Should i worry about calibrating my air

    I just got the macbook air a few days ago and have only had to charge it twice. I kept reading that i should calibrate my macbook air... is it too late to do it? If not, how do i do it? And is it necessary?