Converting from Apple Lossless to MP3: loss of quality?

Hi,
I have made the "mistake" of importing dozens and dozens of CD's using the Apple Lossless encoder. Nothing bad about the encoder, on the contrary. But my iPod is now full.
Is there a way I can convert all these tracks to MP3? Will there be a loss of quality from the re-conversion beside the one inherent to MP3? (since we are not starting from the original CD) And will I have to re-create my playlists?
Mmmhhh... doesn't sound too good, right?
Xavier.

Go to Preferences in iTunes. Then go to advanced and importing. In importing change the import using to MP3 encoder.
Quit out of this menu. On the top tool bar you have Advanced and under here you have convert option. If you select the songs that you want to convert and use this convert option they will go to MP3s

Similar Messages

Will my iphone 5(ios 7 installed) support Oscium's Wipry device if I buy 5pin ligtening to 30pin lightening converter from apple store?

Will my iphone 5(ios 7 installed) support Oscium's Wipry device if I buy 5pin lightening to 30pin lightening converter from apple store?

No idea ,why not ask them ??

Converting to Apple Lossless and making playlist?

I've noticed that in order to convert Wav files that are already on my computer to Apple Lossless I need to do this in the library and it can't be done in a playlist. The problem is that if I try and create a playlist from the new lossless files I can't. Itunes creates the playlist from the origonal WAV files. Is there now way to bring a wav playlist into Itunes and make it into a apple lossless playlist?
Gerry

Yes, Apple Lossless is roughly 45% smaller than pure WAV PCM files.
Once converted, iTunes will place the Apple Lossless files in your music directory, under the correct artist/album folder. There should be new entries in your library that refer to the Apple Lossless files, and the old ones that refer to the WAV files should remain untouched. If you check your "Added recently" playlist, or sort your library using the "Date Added" category, you should find the Apple Lossless entries.

Itunes with Apple Lossless and mp3

I have a Mac mini with iTunes.
How can I configure and the system such that:
- I want to play HD music in my living room so I will have Apple Lossless tracks for this purpose.
- I still want the same tracks in MP3 (because it takes much less space) and sync those on my iPhone.
Obviously I can have different playlists for the HD tracks and MP3 tracks.
Is there an application that can automatically discover newly imported HD tracks and convert them in MP3?
Is there a way to sync those MP3 (wired and wirelessly) to different iPhone/iPod without having them in iTunes?
Thanks in advance.
Paul

It doesn't do MP3, but iTunes has the abilty to automatically convert higher bit rate tracks, such as ALAC, to 128/192/256 AAC files on sync. There is no reason to keep multiple copies of the same track.
Just connect your iPhone and select it in iTunes. Click the Summary tab and select the option to "convert higher..." then select the bit rate you want.
Or, you can use one the new cloud syncing services such as iTunes Match, Google Music or Amazon Cloud Play. All these services will convert or "match" ALAC files to either 256 AAC/MP3.

CONVERTING FROM ITUNES MP4 TO MP3, WMA E.T.C. ....How do you do it?

How do i convert my MP4's to MP3, WMA e.t.c. with itunes, so i can play the music i purchase, on my Archos, or other MP3 player.
ps sorry for the capital letters,

No, with protected files the only thing you can do is use iTunes and iPods. Burning them to CDs doesn't erase the copy protection. Nor can you transfer them to SD cards and get them to play on a phone or anything. Protected files are just that, totally locked. There are programs out there that advertise being able to break that protection, but so far none of the ones I tried did anything except corrupt the file so that even iTunes wouldn't play it.

Converting from ALAC to AAC: A question of quality?

I'm trying to back up my music electronically. I have all of my CD's on a rack in my entertainment center. However, I'm upgrading to a flat panel TV (YES!!!) finally, and with my old tube TV, the entertainment center is going, and being replaced by something much smaller.
Anyways, I'd like to make copies of my CDs, so I can store them away in the attic. I was told Apple Lossless is essentially the same as having the actual CD on your computer (so no loss in fidelity at all). However, I was wondering if this is true.
And if it is true, does this mean that I can rip CD's to my external HD in ALAC, and then convert them to AAC without any additional loss of quality??? (i.e. Does converting a song in ALAC format to AAC have the same quality as converting from the actual CD to AAC?)

Any lossless format - Apple Lossless, FLAC, etc., - should be identical to the original in sound quality.
I have found this to be this case in listening tests on fairly high quality stereo equipment. However, the best way to answer your question is to test this yourself. Rip a cd to Apple Lossless, and, I would suggest, to 320 bit AAC, and then see if you can hear a difference between them. I'll bet that you would be hard pressed to hear a difference even at 320 bit. After ripping my cd's I now regard my cd's as my backup, and the digital copies my actual collection, since that's what I actually listen to. So in that sense you always have a perfect backup, as long as you still have the cd.
I frequently convert FLAC's to AAC with outstanding results, and would expect the same with Apple Lossless. I think the bit rate you choose to convert to will be much more significant than whether you
convert from CD or lossless. Again, try it and see if you can hear a difference. (If my memory is correct - not always the case - the lossless format will be decoded first and then will be recoded to AAC - meaning you are essentially creating the AAC files from cd's in either case. Can't find a source on this tho to point you to).
One last thing, is storing them in the attic your only alternative? I just remember storing records in the attic and, well, they just never were the same with the summer heat. Cd's are more durable but I'd still be worried (unless it was a finished attic).

Converting from format AAV to MP3

I would like to convert some of my music in my iTune library from format AAC to format MP3 and then load the new format on a memory car SD.
Is it possible? and if yes, can they be stored in the iTune library and later be transferred on the memory card?
In a few steps what is the procedure
Tank you in advance

Forget my question, I have found the answer.
What I had to do is select my pieces of music and right click and select convert to MP3
had previously change the parameters in the preferences/import

Problems with a MS Word doc that was converted from Apple Pages

Hello. I am writing a book and after completing most of the text in Apple Pages, I had to convert to MS Word to use the sidebar feature. The MS Word document that I am working with has some very strange attributes. Where quotation marks were used in Pages, the Word document substitutes material from a nearby page. Where sections are underlined, it again mixes some of the original material wtih material from elsewhere in the book. I have attempted to fix these issues by retyping the incorrect text, but when the document is saved, the next time I open it, more horrors lurk in the same places.
Has anyone experienced this? Any suggestions?
Thanks

I have done this, repeatedly, using OSX 10.7.6 & 10.9.2, Pages 4.3, and Word 14.1.0. I did not experience the hassles you report, but then, perhaps my docs were simpler than yours. But I did retain list features & outline structures from Pages to Word, and Word to Pages. In-line graphics remained as such and as I recall, underlines, italics, and section lines remained intact as well. Transferring both ways.
If you were doing your transfers using Pages 5.2, I recommend that you delete 5.2, revert to 4.3 if you possibly can (get an old .dmg copy from deep backup, a friend, whatever it takes)
I loved Pages 4.3. I have removed Pages 5.2 from my system, best I can.

Converting from Ogg Vorbis to mp3

I have some music files on my computer with the file ending .ogg and was wondering what the best way would be to change to .mp3 and to allow for it to burn to a disc. Is there certain software I need?

I haven't tried this, but maybe this will help you:
Xiph QuickTime Components

How does one transfer from imovie to fce without loss of quality. Using a panasonic hdc-tm15 full hd 1920x1080

I am capturing my footage on a Panasonic hdc-tm15 full hd 1920x1080 avchd. The format recorded is not compatible with fce so i have to import to imovie first. what export settings do i need to use to ensure i dont lose quality when going from imovie to fce?

It is suggested to output MOV with AIC codec to keep the raw video quality at max.
Output like this: Share->Export Using QuickTime..
In pop-up windows, click Options->in Moive Settings pop-up window, click Settings button->In Compression Type box, choose Apple Intermediate Codec
Good luck.

AAC, Apple lossless, Mp3,WAV

I used to use AAC now I use Mp3 at 320kbps. What is the best way to import for the best sound quality. I use Serrato Scratch so I usually have to convert some songs when their not in Mp3 format. If anyone has any insight I would greatly appreciate it

AAC and MP3 are comparable in terms of size and quality since AAC is basically the newer version of MP3. They are both lossy and compressed though AAC is a more efficient compression so you should get higher quality at the same bit rate/size when compared to MP3.
Apple Lossless is compressed but, as its name implies, it's lossless meaning it retains all the sound information, whereas AAC and MP3 discard data that is deemed unnecessary by the algorithm.
WAV is essentially a straight copy of the data from the CD.
If disk space is not a concern, Apple Lossless should be the best quality/MB.
If you are concerned about disk space-over absolute quality-go with either AAC or MP3. MP3 is older and more widespread, thus may offer better 3rd party compatibility. AAC, as stated above, is by the same MPE Group and is the new standard created to replace MP3.

How to convert WAV to Apple Lossless?

I just bought an Ipod and have all my music on my computer in WAV format. Could someone please describe how do I convert to Apple Lossless? It isn't descrtibed in the manual.
Gerry

Although the AAC format gives excellent audio reproduction with minimal compression a word of warning: if you have any other mp3 players (non ipod) it is unlikely that they will recognise and therefore be able to replay this fairly apple specific format. Further more if you wish to play these files on a pc which is not running itunes, it is likey that you will have to download an aac codec in order for them to be recognised. Although recognised as an "inferior" format mp3 (lame)is a much more portable compression and therefore will play on 99% of pc's/mac's/mp3 players. If you convert your wav files to a mp3 bit rate of >192kb/s I don't think you will notice a difference in audio quality. iTunes allows you to rip to an mp3 encode, just select it from the drop down list rather than the aac and select a bit rate of 192kb/s (or more) from the setting tab, the default is 128kb/s. Your mp3 encoded files will also take less space on your ipod.
Just thought you may like to know of further options...
MB67
Fujitsu Siemens Amilo 2.8GHz. 1GHz. RAM Windows XP 5G 60Gb
Fujitsu Siemens Amilo 2.8GHz. 1GHz. RAM Windows XP 5G 60Gb

Which is better: Rip from CD or Audio Apple Lossless file

Wich is better for ripping?? For example ripping AAC 320 kpbs, is it better from CD or is it the same from an Audio Apple Lossless File ??
Thanks

The quality you will get from ripping a CD or converting from an Apple Lossless file to 320kbps would be indistinguishable, at least without sophisticated spectrum analysis (if even then). So I would say to do whatever is most efficient for you.
Regards.

Apple Lossless streaming on Apple TV

When streaming Apple Lossless files on on Apple TV, what is the maximum bitrate? I realize Apple TV can stream AAC and MP3 files at 320 kbps, but what about Apple Lossless file that can often provide up to 1,000 kbps? Does Apple TV support such high bitrates? (I know the sampling is always 16 bit / 48 kHz).

Hello. For some reason, your reply to my May 2 post, has disappeared, though I still have it in email. I've reposted in below.
First, let me thank you for taking the time to answer my questions. I'm confident that you've zeroed in on a solution. The clarity of your response is greatly appreciated.
Your points about compressed/lossy formats make sense. This explains the lower bitrates for those formats.
You also asked about the original source of my alac (Apple Lossless) files. As you may have guessed, the original files are typical itunes downloads, which I understand are usually MP3s at 256 kbps.
I had assumed that running them through the itunes converter would transform them into proper (16/44.1) lossless files with the associated bitrates ranging around 1,000 kbps -- with a much richer sound.
At first glance, it would appear that I was wrong. Merely upsampling the music has created larger files but without the added clarity, depth and soundstage. That's how I read your previous post. Again, correct me if I am wrong about this.
However, there is a twist.
As I mentioned, when I play these alac files through Apple TV -- through homesharing on my computer -- they sound no better than the 256k files. However, when I play the same files through the foobar2000 media streaming software, they sound much better and show the proper bitrates at around 1,000 kbps.
On this last question, my ears may be playing tricks on me, but I don't think so. I'm playing the files through a good system: an audiolab 8200CDQ pre-amp and 8200p power amp.
So, this has me stumped.
One last question: what is the point of having a program that upconverts MP3/AAC files to lossless if there is no improvement in sound quality. Why would you have a bigger file that sounds just as bad as the small one?
Regards
Here is your May 3 post, which has disappeared from the websit.
May 3
No problem. Sorry for the long reply.
I see what you mean about my equation. All 16/48 stereo signals would equate to 1536kbps. If you changed the sample rate to 44.1 (what CDs use) or something else, then the bitrate would change.
Now thats for uncompressed formats like WAV, AIFF, and PCM. And in the case of Airplay, the stream getting sent to the AppleTV is always uncompressed, no matter the the original format (aac, mp3, apple lossless, etc).
AAC files (and mp3, wma) are known as compressed formats: some fancy math equations are used to reduce the file size w/o your brain noticing the missing bits, so that initial stream (1536 kbps for instance) gets reduced to 320 kbps or lower in order to fit more songs on your device. the way this happens is really crazy but if you want to learn about it theres a magazine that did a good article. WARNING, its really technical!: http://www.soundonsound.com/sos/apr12/articles/lost-in-translation.htm
you seem to be able to hear the difference between compressed and uncompressed formats. many people do but many dont. It all depends on your hearing, sound equipment, etc. I was wondering if the reason your not hearing a difference btwn apple lossless and aac might be because of where the lossleess files came from. did you rip them from CD's or convert them from another format? If they didn't come from CD's, WAV, or AIFF files, you probably won't hear a difference, because you can't "upconvert" from something like AAC to Apple Lossless and get higher sound quality. If they came from CDs, then maybe the AAC versions are just really good quality to begin with and so you are having a hard time telling. That article has some examples of the same music in different formats, so you can test your ears and see if you notice a difference.
bE

Head Spinning on Creating a Apple Lossless and AAC libraries

I am contemplating archiving all my CDs to an Applelossless library using iTunes. Before doing so, I have some questions. We are in a WIN XP environment.
1) How do I convert an Apple Lossless album to AAC format with all the album info in tack to a separate iTunes library?
2) How do I give multiple WIN XP users access to this single AAC library via iTunes to load their iPod or buy music for this single AAC library?
3) If I add CDs to the Apple Lossless library using iTunes, is there a way to keep the AAC library automatically in sync?
Is there a better approach I should consider?
Thanks for the help experts!

To set up another library in the same Windows user account hold down the shift key when starting iTunes. In one library have your lossless files. In the other library have the AAC files. In the second library import the lossless files with settings set to convert to AAC. To allow multiple users access to the same file store the library where they both have access. Each library is independent, changes in one are not made in the other automatically. You will have to add to one in lossless, go to other library then import the files there.
Better approach. Maybe. I think it is a waste of space to use Apple lossless. My hearing can't tell from AAC 192k from CD. So I just use AAC at 192k or 160k. Even lower for audiobooks.

Converting from Apple Lossless to MP3: loss of quality?

Similar Messages

Maybe you are looking for