How does one transfer from imovie to fce without loss of quality. Using a panasonic hdc-tm15 full hd 1920x1080

I am capturing my footage on a Panasonic hdc-tm15 full hd 1920x1080 avchd. The format recorded is not compatible with fce so i have to import to imovie first. what export settings do i need to use to ensure i dont lose quality when going from imovie to fce?

It is suggested to output MOV with AIC codec to keep the raw video quality at max.
Output like this: Share->Export Using QuickTime..
In pop-up windows, click Options->in Moive Settings pop-up window, click Settings button->In Compression Type box, choose Apple Intermediate Codec
Good luck.

Similar Messages

Hey Apple, How do you export from imovie to fce without losing quality?

I am capturing my footage on a Panasonic hdc-tm15 full hd 1920x1080 avchd. The format recorded is not compatible with fce so i have to import to imovie first. what export settings do i need to use to ensure i dont lose quality when going from imovie to fce?

If you shot Progressive it won't work directly, whereas Interlaed will with the suggested File>Log and Transfer method over USB.
You will also need to select the matching Easy Setup before starting a New Project and transfering clips.
That's usually an AVCHD 1920 x 1080i 50 or 60.
50 for PAL, 60 for NTSC.
Al

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

How does one update from iwork '09?

I followed blog advice to download iwork trial and try to upload from there, but no dice. how does one update from iwork /'09???

With all due respect ... I do not see how one can change the Subtemplate value from Yes to No. When I query the offending Template, the Subtemplate column is not displayed in bold, indicating to me that it can not be updated. Clicking on Edit Configuration, doe not provide an ability to change the value either.
As best I can determine, one needs to 1) query up the template
2) download the rtf file(s)
3) end date the template
4) create a new template and then set the Subtemplate value to No.
And the same steps appear to be required in order to add or update a template Description.
Which raises the question, Why can this not be done by editing the configuration?

How does one rearrange photos in an album without dragging?

How does one rearrange photos in an album without dragging?

View -> Sort Photos lists the various automatic options.

How does one transfer an app purchased on an iMac to an iPhone?

How does on transfer an app purchased via iMac to an iPhone or iPad and why isn't this info presented when the purchase is made?

On the left Sidebar, it's under Devices when you connect iPhone to computer iTunes.
If iPhone not recognise on Mac iTunes :
Mac: http://support.apple.com/kb/TS1591

HT4436 how does one print from cloudon?

I can work on the excel and word programs but can not print from it.
how does on do this?

From an iOS device you need either
1) an airprint printer -
http://support.apple.com/kb/HT4356?viewlocale=en_US&locale=en_US
2) If yours is not listed, then the only way to print is using a computer - for example, on a Mac, get Printopia for the mac. Then your ipad can print using airprint, Printopia intercepts the job and routes it to a printer that the Mac can connect go.

How does one transfer the songs from a classic ipod to an account and back?

I'm giving my sister my ipod classic because I got an ipod touch. We are trying to figure out how to put the music on ipod to her account. Any ideas?

You want to transfer the music from your iPod to her iTunes library or her account? If it's the latter (her Apple ID), then it's not possible as purchases made under one Apple ID are permanently attached to that ID.
If it's the former, see this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How does one transfer only 1 of 4 backups from an old TIme Capsule to a new one, such that the 1 on the old TC can be deleted to save space?

I have a 2-TB TC that currently backs up 4 Macs, which is full - no more space to backup, down to less than a year's worth of backup for one Mac, so I don't want any more old backups deleted.
I bought a new 3-TB Time Capsule, and wish to move only one of the the 4 backups to it, which is currently over 1 TB. The idea is to free space on the old TC for the other 3 Mac backups. Also the two TCs may end up in 2 different locations soon.
I read about how to do this at Apple and at pondini.
Upshot was that I copied over the one sparsebundle using Finder drag/drop from the old to the new TC.
When I go to Time Machine preferences to Select Disk, then click the new TC, and Use Disk, I get this dialog:
I don't want to Use Both.
I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
Tom

tomath2o wrote:
I assume that if I click Replace "Data" that the 1+ TB file that took 12 hours to copy will be lost.
I assume you selected the new Time Capsule? If in doubt, and for future clarification, you might want to rename the Data folder on one or both TCs via Airport Utility. Click it on the Disks panel to change the name; then that name will appear on the selection window, etc., so you'll always know which is which:
In any event, the prompt means "Replace (the old) "Data" as the destination for this Mac's backups." It will not touch either the new or old sparsebundle -- future backups will just be directed to the selected location(s). Do note, however, that when you change destinations, the TM Prefs window will show "None" for oldest and latest backups. Don't be alarmed -- that's just TM being lazy and not checking the actual backups yet. See #B3 in Time Machine - Troubleshooting.
See Time Machine - Frequently Asked Question #34 for details on backing-up to multiple destinations.
By the way, just for future reference, another option would have been to connect a USB drive to the existing TC (that's what "S.TM.Backups" is in the sample}.
How do I get Time Machine to just resume backing up to this sparsebundle, and not create a whole new backup, deleting the file that has the past year of backups?
Click Replace "Data".
Message was edited by: Pondini

How does one transfer publish services configuration to a older catalog?

Hello!
An early suggestion from LR gurus & advisors was to set up separate catalogs as to not create an overly large therefore slow catalog.
LR3 established the published services ability which surplanted previous plug-in services that I'd used from their onset. (Thanks again Jeffery and others!)
While there was a hill to climb with publish services - normal in most transitions -, having gotten there, publish services has helped work-flow.
Unfortunately, there seems to be a hitch as when one opens earlier catalogs the publish services have to be re-configured. There does not seem to be any discussion or instruction as to easily transferring the settings or configurations for publish services to other catalogs. Any thoughts other then configuring each different catalog?
I need to pull files from LR cats that go back to V1 (yes, I know how to update them - that's not the question.) and I have about 25 catalogs to visit and work which is a bit of updating for publish services. Btw, I keep a file card (written on a paper card no less!) to follow what is in each cat as there does not seem to be anyway to output an index of libraries. But the query here is publish services.
Thanks for your thoughts and interest.
Shutter On!
Dan

I frequently see this advise on the forums, and I would love to follow it, but it just doesn't seem realistic. I have LR 3.2 set to backup (and optimize) the catalog every time I quit. Since the catalog contains all the work I put into my images after I take them, I consider these backups as important, if not more so, than the separate backups I make of my raw images. The catalog backup takes several minutes on my existing big catalogs, I can only imagine how long it would take if everything was in one catalog.
I create a new catalog for each year, but I also have a "Processing" catalog, which is where I import new photos. I do all my processing in that catalog, which typically only has a few thousand image (even when I have a backlog to process). When I'm done developing a shoot and have complete my "standard" export tasks, I switch to my current year catalog, and use import-from-catalog to get the images into it. I switch back to the processing catalog and remove those images from it.
Am I missing something?
How long does it take to optimize/backup you 500k catalog?
Thanks.

HT5887 Air Drop does not transmit Contact info located in the Notes Section of the Contact. How does one transfer All Fields of a contact record?

Transferred a Contact from my iPhone 5S/ios7 to my iPad Air. Successfully transferred the Contact including all ph numbers, email addresses, and street addresses. But -- it did NOT transfer all the text in the "Notes" section of the original Contact. Why? Some of my Contacts also have a photo in the same Notes Section. I don't want to sync the devices via the cloud because I just want selected Contacts. Sharing via email does the same thing - no Notes. Only way I've found is to Sync with Outlook Contacts on my Windows XP and Windows7 PCs.

So far it appears Microsoft's Outlook program is the only contact manager capable of "Forwarding" a Contact record that is all inclusive of all the data in the Contact including the Notes data.
While some may use the Notes field to store "secret or confidential" information...I've used it to store more mundane Notes that are not NOT confidential or sensitive in any way. Moreover....only want to "Share" (Microsoft calls it "Forward") with my own multiple devices. The "Notes" data might include a picture, another type of image, a map, a URL, etc. I and the rest of the MS Windows user world began building Contacts in Outlook so long ago it is not practical to switch to iOS-based personal info management software unless it allows complete conversions or "Sharing" as Apple calls it.
Microsoft figured this out years ago by allowing the user to choose whether to include Notes or not when "Forwarding" any individual Outlook Contact Record. It sounds like we need Microsoft Outlook for iOS like we have MS Outlook for MAC. With thousands of Contacts in MS Outlook 2010 I can't do without the Notes data in my files. And it isn't practical to use a syncing function when I only need 10-20% of my overall contacts on some of my iOS devices.

How does one recover from Downloader:OSX/Flashback.C?

Hi All,
I am pretty sure I dowloaded and installed it on one or more of my machines...
It seems that a re-install of Lion is the only way to bring back Lion's XProtectUpdater functions...
Is there a thread for fixing this dumb mistake?
Cheers,
Adam

After giving this additional thought, I realize that you seem to be the first to report having been infected by this version, so I don't think any of us can offer an exact solution yet. If you don't mind taking your time, I'd like walk you through this slowly so we can all learn more about it.
It would seem that this version was served up for a short time around Oct 11. Do you know if you used it that long ago or was it more recently? Do you still have the installer? If so, hang on to it for now as we may need you to provide it to some sample sites.
Go ahead and test to see if XProtect has been compromised by opening your Terminal app (in the Utilities folder) then copy and paste the following into a new window after the "$" prompt:
sudo launchctl list
hit return and when prompted, enter your admin password (you won't see any typing) and hit return again.
The list should include "com.apple.xprotectupdater.plist" if it's working.
If it's not working, then inspect either of the following two files:
/System/Library/LaunchDaemons/com.apple.xprotectupdater.plist
/usr/libexec/XProtectUpdater
If either are blank, then you have been infected. Restore from backup or reinstall Lion.
Next you will need to fix Safari and/or FireFox. F-Secure has these instructions:
Disinfection
Manual Removal Instructions
In Terminal, convert the affected PLIST files to XML:
plutil -convert xml1 /Applications/Safari.app/Contents/Info.plist
plutil -convert xml1 /Applications/Firefox.app/Contents/Info.plist
Remove the following entry from the PLIST files:
<key>LSEnvironment</key>
<dict>
<key>DYLD_INSERT_LIBRARIES</key>
<string>%malware_path%</string>
</dict>
Delete the file specified in %malware_path%
Intego explains concerning Safari:
...it adds the actual backdoor module at /Applications/Safari.app/Contents/Resources/UnHackMeBuild.
What I don't know is whether or not any of the other files are still installed. They were:
.MacOSX/environment.plist
Library/LaunchAgents/com.apple.SystemUI.plist
Library/Preferences/perflib
Library/Preferences/Preferences.dylib
Library/Logs/softwareupdate.log
and Intego said that #4 is not installed. If you find any of them please move them all at once and hold on to them and let us know. The first is a hidden folder, so if you need help looking into that let me know. If that one is not moved at the same time as the others you will probably be unable to log back into your account.

How i can transfer from Imovie to idvd with excellent quality

I compose my video in Imovie but when i transfer to idvd this movie lost quality, especially when i burned the quality is really bad

I compose my video in Imovie but when i transfer to idvd this movie lost quality, especially when i burned the quality is really bad

How does one print from Adobe Reader (I have windows 8)?

I have adobe reader with my windows * and I just don't have a glue as to what to do.

See FAQ: Printing from Adobe Reader for Windows 8 Tablets.

HT1766 When I turn on my iPad am confronted with the message "iPad Not Backed Up. This iPad hasn't beern backed up. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi." How does one proceed from this message?

How do I overcome this impasse?

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How does one transfer from imovie to fce without loss of quality. Using a panasonic hdc-tm15 full hd 1920x1080

Similar Messages

Maybe you are looking for