Converting Poral Service to Web Service
Hi
Can any one help me in converting a portal service to a web service or point me to a link where i can get some documentation on the same.
Rgds
NagaKishore
Hi NagaKishore,
This following link has great tutorial on how to creat a webservice from portal service.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/how to create a web service from a portal service.mht
PS:Please reward points if this is any help to you .thank you.
Similar Messages
-
Converting process into a web service
I have create a simple HTTP >> XI >> R/3 process which just calls returns a Material description (XI SP16). Everything works fine when making a HTTP call to the process. I now need to convert this into a web service and ran the Web service wizard which created the WSDL. When I try to call the following URL I receive the error listed below:
http://<server>:50000/XISOAPAdapter/MessageServlet
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#11 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0
ModuleProcessorRemote not instantiated
Anyone have any ideasuser11131072 wrote:
It would have been helpful if the example covered 11.1.1.6 which is our standard for now.
"To follow the steps in this column, you’ll need the studio edition of Oracle JDeveloper 11g Release 2 (11.1.2.2) or later, ..."
PeeVeeThat's why you always need to state your JDev version at the beginning in your question.
https://forums.oracle.com/forums/ann.jspa?annID=56 -
Convert portal service to web service option in NWDS
Hi all,
I am using SAP NetWeaver Developer Studio (Version: 7.0.14), in this I couldn't find option to convert portal service to web service.
Please help me out, how to convert portal service to web service through NWDS or any other way to do it.
Helpful answer will appreciate.
Thanks,
Regards,
Kathiresan RHi
In NWDS go to New ->other -> portal application -> portal application object -> portal web services -> portal web services from portal services and select ur portal service.
Generate portal web service with PDK wizard by choosing Portal web service from portal service
Select the interfaces by clicking the browser button.
select the methods to be exposed to web service.
Now WSDL files are generated for portal services.
You can view the WSDL by going to
System administration->support->portal runtime -> soap admin -> web services.
Hope this works for you. Please excuse any small mistakes if I have made.
Regards,
Shitij -
SOAP to IDOC: Unable to convert sender service BS to an ALE logical system
Hello everyone,
I have this scenario where i receive web services calls and have to integrate the received xml messages (idocs) into SAP R3 system.
I allready reveive the message in my XI engine, but i'm getting this error (being BS the name of my Business Service included in my external party):
"Unable to convert sender service BS to an ALE logical system"
I allready tried everything that is specified in this blog:
The specified item was not found.
Probably it doesn' fit my requirements. I'm not sure...
Can anyone help ?
Thank you in advance for any help
Nuno- do u have the same logical name defined in the BS and in the Adapter specific attributes.
also check if u have defined the logical system (SALE ) with the same name. -
Unable to convert sender service IP_testScenario to an ALE logical system
i have a IDOC -> BPM--->File scenario,
the BPM is named as IP_testScenario
when IDOC is sent from R3 to BPM, in the MONI i can also see a Acknowledgement message saying
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>IP_MMWIS016_01</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service IP_testScenario to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
why this happens...........pls helpHi..
For Sender you have to create the TS of Type Web AS ABAP right..
While assigning your Bs in ID...Double click on your BS , Goto Service--> Adapter Specific Identifiers..
Hope it helps...
Kumar.S -
BPM - IDoc to SOAP problem (Unable to convert sender service)
Hi,
I have a BPM scenario where I'm sending an Idoc from r/3 to XI to SOAP. As part of my scenario I'm sending an acknowledgment (ALEAUD) back to R/3.
I'm getting Unable to convert sender service IP_BPEL_INBOUND_ORDER to an ALE logical system on the Ack back.
So I usually know what to do when I get this, I do the SLD settings on the r/3 service and I'm OK. But in this case, it's asking for those ALE settings on the Integration Process?
I tried adding a logical system on it but now I'm getting the error that this is already used by the r/3 service. So I'm not to sure what to do next???
Rgds,
YvesOk do one thing, in you mapping take one field at target side (may be u can create one or use which is not been used yet) just map the standard function called Sender to this field in target.
Now in Intergration Directory when you do the header mapping by using F4 do not map the business systems this time, just press the button "Etended Path" (m not sure abt the exact name of this button) not use the X-Path here and select that target field which you mapped with Sender function in mapping.
How To Handle Acknowledgments for IDoc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
I hope this will solve your problem.
Regards,
Sarvesh -
Unable to convert sender service(BPM) to an ALE logical system
Hi All,
I am working on simple File to File Scenario where XI picks the File and process thru BPM and sends the file to R/3 Application server and wait for SYSTAT STATUS IDoc for the acknowledgement from R/3 System.
My scenario is working fine by receiving the STATUS IDoc and closing the BPM instance.
But later I am getting System error message as below:
Unable to convert sender service (BPM) to an ALE logical system
Any clues in this case?
Thanks in Advance.
Regards
Sudha.Hi Rajesh,
1. I am receiving the file into BPM and after validation Iu2019m splitting the file into multiple files.
2. Each split file sent to R/3 Application Server(by activating the correlation with the filename)
3. BPM will wait for SYSTAT STATUS IDoc (by using correlation with the filename) from R/3 System
for acknowledgement purpose. After receiving the respective STATUS IDoc (with the filename) then
BPM will close the instance.
4. If the STATUS IDoc not received with in specified duration an alert will raise and close the BPM
instance.
So we are not sending the STATUS IDoc data to Sender system.
Regards
Sudha. -
Once again: Unable to convert sender service to an ALE logical system
Hi,
I know there's a lot of threads regarding that error but I didn't find one that fits to our current scenario:
IDoc -> XI -> File
We have checked if the logical system name in SALE (of sending system) fits to the one in the business system and it does now.
It didn't fit at first but we've changed it in the SLD and reimported the business system.
We still get the same message:
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
There is no logical system entered in the receiver business system. Do we need that? But of which logical system?
Thanks for any advice
KarstenHi,
Acknowledgments
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender.( Ex : Idoc----File). Here by default Idoc has the inbuilt feature of requesting the Ack.
Acknowledgments are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments.
Sender adapters of the Adapter Engine do not request any acknowledgments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Regards
Seshagiri -
Unable to convert sender service BPM_Name to an ALE logical System
Hello ,
While sending from BPM to R/3 ( IDOC) i am getting the following error :
"Unable to convert sender service <BPM_Name> to an ALE logical system"
Please kindly advice,
ReddyHi Bujji,
I just remembered that you have to maintain your adapter specific parameters for your business process. The side effect however is that you have to define the business process name as logical system in your receiving SAP system and that you have to maintain partner profile settings.
The answer to your question is there in this Blog:
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
If the above solution doesnot work.....
You can also try this, don't enter the "adapter specific settings" on the Integration Process. Instead enter a "Header Mapping" Sender Service in the Receiver Agreement. this should be the real sending system.
When you enter "adapter specific settings" in a BPM, the receiving SAP systems ALE layer thinks the sending system is your BPM - using the method discussed here we are overriding that so that ALE see's that its communicating with the real sending system.
I hope it helps....
Regards,
Abhy
Message was edited by: Abhy Thomas -
Getting error message ' Unable to convert sender service to an ALE logical
Hi,
I am using idoc to file.
and my xi system is working fine. at sudden when i process one idoc . I got this message.
Unable to convert sender service to an ALE logical system
Here in monitoring, i am able to see the success falg but in acknowledgement column, i see system error..
I did no change in configuration.
Your inputs will be appreciable.Hi,
Also, is it possible that the XI system was recently upgraded?
As you indicated that no config changes were done, therefore, such error should not just pop up with no reason.
In an earlier release of XI (sorry I cannot recall the SP level), IDOC ack was not provided. However, in a later release, it is the default.
Regards,
Bill -
IDOC Receiver - Unable to convert sender service to ALE
Hi!!!
I am trying to configure the following scenario: FILE - XI - IDoc to R/3.
A business service called IDOC_Demo recovers from the server the file, and after mapping it, it tries to send it to IBP, the R/3 system using a IDOC Receiver comunication channel.
IBP is configured in SLD.
I have in XI System the RFC conexion, and I have define the port via TCODE IDX1.
But it does not work, I am geting the following error:
"Unable to convert sender service IDOC_Demo to an ALE logical system"
I have checked the adapter specific identifiers, but I can not see anything wrong...
I do not know what can I check! Could someone help me?! What can I do?
Thank a lot!!
Araitz.Thank you very much, but I still get the error message! Of course, I read your blogs Michal before posting the question, and they have been very useful, but still...
In SLD I only have the R/3 system, the name is IBP and the business landscape and the logical system name (I do not know if this could cause a problem ).
The connexion is IBP, and it works, and in idx1 I have configured a port, and its name is SAPIBP, using the IBP connexion.
Design I have imported the CREMAS.CREMAS03 IDOC, and I have done a mapping interface, I have disabled the EDI_DC40, and set begin and segment to 1.
Configuration I have created a business service, IDOC_Demo, that has a communication channel, sender, file type.
And I have the IBP service. In adapter specific I can see: logical system IBP, and R/3 System IBP, client 100. If I push the Compare with SLD button, nothing happens what should happen?
IDOC_Demo receives the file, and via an Outbound, async interface, calls IBP, that receives the IDoc using a receiver IDoc type adapter
Now the receiver agreement has information in the header mapping, sender service, IDOC_Demo, receiver service, IBP.
And I do not know why, but it does not work any idea?
Than you!
Araitz. -
ERROR"Unable to convert sender service to an ALE logical system,(Urgent)
Hi All when i am not giving the sender service address in the Receiver Aggrement i am getting this perticular error .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
==========================================
And if i am giving this one then i am not getting any such error rather i am getting another error "Unable to convert sender service to an ALE logical system" for this also i have checked the LS system name in the Adapter specific Identifier and the logical name are exactly same. But still i am getting this error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
=============================================
Still i am getting this error can anyone please let me know what to do now..??
Please treat this as urgentHi,
This error is caused when Sender System name does not match the logical system name of partner. As you mentioned you have done all the steps to ensure that, here's a checklist that could be helpful:
1. Check adapter specific parameters for sender system.
2. Maintain header mapping in receiver agreement and ensure that sender service name provided is same as business partner name required in R3 and business partner type is LS.
3. This may sound very basic, but ensure that checkbox for 'Apply control record from payload' is not checked and if it is then the values passed through payload are appropriate.
Hope this would be helpful.
Thanks,
Bhavish -
ERROR" unable to convert the service as an ALE logical system"
Hello All,
In SOAP to IDOC scenario I tested the webservice with the client tool. Its hitting the integration engine but its throwing up an error" unable to convert the service as an ALE logical system". How can I maintain a logical system for a service as its outside our landscape. Can any one let me know how to proceed with this.
Looking forward to expert comments.
Thanks and regards,
NeelimaHi,
Check this blog by Michal.
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
Regards,
Sudheer. -
Error converting from service name
Hi,
While installing NW04 6.40 Java System > Distributed > Central Instance Host preparation, i found this error but the installation is still going well. I'm wondering whether it is an issue for my install.
WARNING[E] 2006-11-02 13:07:35 [syxxcnamrs.cpp:128]
PSyServicesEntry CSyIPNameResolverImpl::getServiceByName(const iastring& serviceName, const iastring& protocol) const
Error converting from service name=sapmsRDX/protocol=tcp to port number. SAPRETURN=12
Thanks,
TorpedoThere is an entry missing:
add in /etc/services
sapms<SID> 36<systemnumber>/tcp
Markus -
Hyperlinks not working correctly when converting word doc to Web Page, Filtered
I have created a word document (MS Word 2013) with Table of Contents and their links to particular sections and all the hyperlinks works fine in the word document. But when I convert this document into Web Page, Filtered then after a specific point
the hyperlinks not pointing to their respective sections instead they are pointed to the end of the page.
I have checked the page source of the HTML document and found that the table of contents have hyper links but the respective sections doesn't have the hyper link code and hence click on the a section didn't find the that section and go to the end
of the document.
I have tried to convert into PDF and hyperlinks worked fine.
Please advise me how to resolve this issue.
Thanks in advance
DeepakHi Deepak,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here
Maybe you are looking for
-
I have just re-installed itunes. The previous user is still listed. When I try to login in with my account, Apple says to view my account. When I do that, it reverts back to the other user. I want the other user totally off of my system. How do I
-
How do I backup a large music library to two smaller drives?
Does anyone know if it is possible to split a library in half, when backing up? I have an external 1000 gig lacie drive that is the home of my itunes media folder location. I also have two smaller lacie drives that put together could have enough spac
-
FM for BUPA_PRE_DA
Hi, anybody knows a fm for setting/unsetting archive flag for business partners, which does something like BUPA_PRE_DA transaction? I've created a bdc for bupa_pre_da but the popup (prog. 'SAPLSP01' , screen '0500' ) appears and can't be closed aut
-
Drop Shadow caused by light source (Motion 3)?
i am trying to create some drop shadows with objects in Motion, and i cannot seem to find a way to allow the 3D lights, to create a drop shadow for the object that is blocking the light. The object is also in a 3D group. I am aware that you can just
-
How to synchronize audio track and video when transmitting by RTP
since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?