Converting Warning Message 06434 into Error message

Hi Experts,
While creating PO with ref to RFQ systems gives warning message 06434. Kindly any one guide me how to convert this warning message to error message.
Thnxs
Harish

Hi,
To change the message category from Warning to Error,please follow the below path in SPRO:
Materials ManagementPurchasingEnvironment-- Define Attributes of System Messages------System Messages
Edited by: Manish Kumar Agarwal on Jun 15, 2009 12:59 PM

Similar Messages

  • Converting Warning Message to Error Message in Benefits Enrollment Screen

    Hello SAP,
    How to convert Warning Message to Error Message in Benefits Enrollment Annual Enrollment Screen.
    Warning Message: No beneficiaries selected for plan XXXX.
    As per my requriement, there is one warning message which is popping up when all the plans total donot count to 100 %. At that time we need to show a Error message instead of Warning Message. Now warning message is displayed.
    Reason: Insurance plans require error message when beneficiaries donot total to 100%
    My question is in which message class or in which Table these messages are maintained and how to modify it.
    Thanks,
    Sankar Narayana

    which badi you are using?
    You cant use all methods to raise a error message
    for example
    Error_table of the method CHECK_DEPENDENTS of user exit PBEN0032 should
    olny be used to raise configuration errors. Please use
    CONSISTENCY_ERRORS to display any error message[move the content of
    error_table to consistency_errors and clear the error_table inside the
    method CHECK_DEPENDENTS].

  • How to convert warning message MM071 into error message

    Hello All,
    I have flag deletion indicator for 1 material thru tcode MM06
    Now i have to convert that error message into warning message..
    For the same i went to path--spro - Mat mgmt-purchasing-Environmentdata-define attributes of System messages,but it didnt solved my purpose..
    How to solve it...Helpful answers will be highly appreciated
    Regards
    NanoSAP

    dear sir.
    pl check message number ME-051 this message for Material & flagged for deletion.
    regards
    jrp

  • How to convert Warning message Appl.Area V1 mess.No 428 to Error Message

    Hi,
    Can any one please tell me how to make a warning message to error message in Scheduling Agreement, message no is 428 and application area is V1, this message comes when the user exceeds the target Qty in Schedule line.

    If a message is a custom message, then by changing the message type from W
    (warning) to E(Error) we can convert the message type into error message. This is done with the help of development guy. A change in the code is needed.
    If it is a standard message, then it depends on w hether we have teh access to change the message type. If access is there, then it is possible to change the message from Warning to Error. i.e. If we are capturing std SAP message in our code and displaying then we can change it, else if SAP message is displayed directly, we cant change it.
    So, to change it, capture the error message from SAP in some Zcode and then convert that message into a custom message of message type E.
    The whole change needs ABAP support.
    Reward if it helps.

  • How to convert Warning Message ME495 to Error Message?

    Hi,
    Can someone please tell how can the Warning (W) Message no. ME495 i.e. "New release strategy determined due to changes in requisition" can be converted to Error (E) Message. This message no. does not appear in SPRO -> MM -> Purchasing -> Environment Data -> Define Attributes of System Messages and also it does not make any difference if it is added here manually as Warning message.
    Just FYI - this message "New release strategy determined due to changes in requisition", appears when changes are made in the existing PR having Release Strategy in effect.
    Thanks.

    Hi Mauro,
    Thanks for your reply. However, I checked that earlier and I think since this an SAP standard program and therefore, changes could not be made to change it to an Error message. Is not there any setting or way of to convert this Warning message into an Error message?
    Regards.

  • Want to convert warning message in error message.

    Hi..
      In transaction code F-47, one warning msg has come 'Purchasing Document belongs to another supplier'.
    So, now i want this should be an error msg. I checked at configuration level, but it not possible.
    I got the include where this msg has come.
    I searched for User Exist and BADI, but not able to find.
    If any one can give me the solution for this.
    Thanks in advance....!!
    Thanks & Regards,
    Poonam.

    - Some message are customizables (look via SM30 at V_T100C)
    - You may use FI [validations|http://help.sap.com/erp2005_ehp_04/helpdata/EN/5b/d2315a43c611d182b30000e829fbfe/frameset.htm] for that (Wiki [Validations & Substitutions |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=51687], OSS [ Note 842318 - Frequently asked questions about validations + substitutions|https://service.sap.com/sap/support/notes/842318])
    Regards,
    Raymond

  • Convert Warning message to error message in counter updation(Not for CTM)

    Dear Experts
    When counter reaading is enterd as previous counter reading then system,gives message of counter overflow,i want to change this message as error message inly ctm login will punch the measuring reading incase there is counter overflow.Please guide how to do this.
    When i clicked on message follwoing pop is shown
    The counter reading entered will lead to a counter overflow                                                                               
    Message no. IR036
                                                                                    Diagnosis
                                                                                    You have entered a current counter reading for measuring point 113 that
        is lower than the current counter reading in the previous measurement
        document ('higher' than in the case of counters that run backwards).
                                                                                    System Response
                                                                                    The system defines this as a counter overflow so that the counter
        reading can continue to increase, or decrease in the case of counters
        that run backwards.
                                                                                    Procedure
                                                                                    Check whether a counter overflow has actually occurred under the
        circumstances.
    Regrds
    Raj

    Hi
    Check in ur customization...
    Plant Maintenance and Customer Service
    Master Data in Plant Maintenance and Customer Service
    Basic Settings
    Measuring Points, Counters and Measurement Documents
    Define Measuring Point Categories
    Select ur category and double click it...
    there u have to maintain wat type message u require.. MeasRge message - W or E
    Check it out
    - Pithan

  • How to convert Warning message CK758 to Information message.

    Hi,
    While executing sales order cost estimte, I am getting following message as "warning" but want to convert it to "Information". Can you plz suggest where to do this change. T-code OBA5 is not helping.
    Message:
    Valuation in costing variant is not the same as operational valuation
    Message no. CK758
    Diagnosis
    The costing variant KPC2 chosen has a different valuation to the operational valuation in plant FI05.
    Regards,
    Bijay

    Hi Bijay,
    Message CK758 cannot be switched off via OPR4_CK, that's the standard system.
    As a suggestion, you may change the code of MODULE (PAI) CHECK_VALUATION_I0C. Of course this would be a modification.
    Regards,
    Raghu Ram Thatavarthy

  • Warning Message Converted into Error Message

    Hi,
    I have converted warning message into error and I am checking the results of the same...it is giving me the desired result, but the in the dialog box instead of 'E' (error), it is showing 'I' (information) and the instead of Red signal, it is showing Yellow signal, why it is so? And how to correct it?
    -Saleel Kulkarni

    Hi,
    Message No. 06152
    Material Master > Purchasing > Enviorment Data > Define Attributes of System Messages , here I added one entry which I found by executing transaction code (Message Maintenance) SE91.
    I was searching in forum... Jurgen has replied to same query....he suggesting SAP Note (521174), what you suggest?
    -Saleel Kulkarni

  • Convert Error Message into Warning Message

    I wanted to change alternate account into existing GL account. But it is not permitting to post because it is having balance. So i wanted to change error message into warning message. i tried with the following process but still it is not showing warning message showing as error message only. please suggest us.
    a) OBMSG
        Application area  Msg   Allowed        Standard          Switch Off
               FH                  007    W                   E                       tick mark
    b) OBA5
         Msg                                         Online          BatchI         Standard
         007                                                w            w                 w
    Please suggest me i need it urgently.
    Regards
    D.J. Laxmi

    Hi,
    Certain Error messages are not passed to be changed to warning message eventhough you maintained proper customization for the same. I can only recommend you that neutralize the balance of Gl account and change if reporting is accepted.
    Regards,
    Chintan Joshi

  • Error message into warning message KO450

    Hi,
    There are  unsettle RA  value in project PAD-9114. Because of  this unsettle RA  value in  the project  we are not able to  close the project and receiving error message like below:
    1.There is still WIP for wbs
    2.Balance of  wbs is not zero.
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    How  to change  above  error message   into warning message so that   it will allow us to  close  the project.
    With regards,
    V.krishnamoorthy

    Hi,
    Thanks  for your answer. But still i am receiving the same error
    There is still WIP for WBS PAD-9114
    Message no. KO450
    Diagnosis
    The WIP for WBS PAD-9114 has not been cleared.
    System Response
    WBS PAD-9114 cannot be deleted.
    Procedure
    Calculate the WIP for WBS PAD-9114 so that it can be cleared.  Then settle WBS PAD-9114, including the cleared WIP in the settlement.
    With regards,
    V.krishnamoorthy

  • How to change Error Message into warning message

    Dear Friends,
    I am getting an error
    The qty stored that was entered is adjusted
    Message no. XU 040
    at the time of GRN. I am maintaining batch specific Unit of Measure.
    Please tell me how to change this error message in to a warning message.
    Thanks
    Prashant Atri

    Hello Prashant,
    This is satndard SAP messagge which is maintained in customizing;
    SPRO>>Logistics - General>>Batch Management>>Define Attributes of System Messages
    Here you can convert this messages to warning message. I urge you to please check with abaper as this may be hardcoded message and it may have implications on valuation and posting.
    In the above IMG path you can do the changes
    Br,
    Tushar
    Edited by: Tushar Patankar on Jan 1, 2011 5:36 PM

  • CONVERTING ERROR MESSAGE TO WARNING MESSAGE

    HI GURUS,
      CAN ANY ONE GIVE ME IDEA HOW TO CONVERT ERROR MESSAGE TO WARNING MESSAGE IN QM MODULE.WHEN I AM POSTING STOCK FROM QUALITY TO UNRESTRICTED. BECAUSE IAM GETTING ERROR WHEN IAM POSTING STOCK GIVING ERROR TRANSFER POSTING THROUGH QUALITY ONLY. MY ERROR MESSAGE NO IS QA495. I TRIED ALL POSIBILITES. BECAUSE I AM NOT GETTING INSPECTION LOT BUT STOCK IN QUALITY. GIVE ME IDEA.
    BHAKTA

    Dear BHAKTA,
    it's not possible to customize every message in SAP System to warning or error.
    It depends on the coding. I have found message QA495 twice in coding, both times it's hard coded in Inlcude MM07MQSS. So it's not possible in standard to change this.
    How to find this information:
    SE91
    -> enter the message
    -> button 'display'
    -> select the line
    -> button 'where-used list' (CRTLSHIFTF3)
    -> now you get a list of all programms where the message is used
    Now you can check if message type is hard coded or read in customizing.
    If you really want this you have to modifiy the coding. But I would not recommed this, as hard coded errors are necessary to make sure that the standard scenarios work correctly.
    Regards,
    Sabine

  • Change of error message into warning message

    While doing FBZP i have found the following error.
    Clearing acct only allowed for an outgoing bill of exch.pmnt
    Message no. F3029
    I am not able to go further, the above message is coming.
    I want to make the error message into warning message.
    Please suggest, how to overcome

    Hello BSR,
    The Error message F3029 is raised when the clearing account (T042I-VKONT) is filled but the payment method in question is not defined as "Bill/exchange".
    I assume that the field is not changable at the moment. You may make necessary changes (delete the entry or delete the specified account) with the instructions below.
    1. Go to Tcd: FBZP -> Click [Pmt methods in country]
    2. Select the entry for the erroneous country(?)/payment method
    3. Change Payment method classification to 'Bill/ex' and save
    Now you should be able to change "Set Up Bank Determination for Payment
    Transactions" table.
    If you still want to use this payment method, please change back to the original classification after making necessary changes in T042I.
    I believe this information would help you in resolving the reported issue.
    Best Regards,
    Vanessa Barth.

  • Convert Error message to warning message

    Hi Experts ,
    At the time of creating RFx we are getting an Error message "Delivery date is before the submission deadline 19.07.2011; check item 0001"
    Now I want to change the Message type from Error to Warning ..
    How can i convert the message type as it i s a standard one .
    Thanks ,
    Sandeep .

    Dear Ricardo Cavedini,
    I feel that this message cannot be switched to warning, since it is against the RFX process to publish it with an earlier delivery date.
    I also 100% agree with you that, it should be a error message and it may not be changed to a warning message...
    However I have a similar issue with some other message, could you please visit How to remove warning message "you are offerring itemxxxx for free"? and put your valuable answer?
    Ganapathi

Maybe you are looking for