CONVT_CODEPAGE errror

I have a program which generates a flat file to be FTPed to another Unix Server from SAP. In this file if there are Non-English characters then they are not being interpreted properly at Unix Level. For Example :
There is a MATNR in MARA as 'FORFAIT RÉPARATION'. I have highlighted the character in question as BOLD & ITALIC.
This material is transferred to the flat file, when you open this file in AL11 on SAP Screen, it shows you the MATNR as above 'FORFAIT RÉPARATION'.
But when you logon to SAP at Unix Level, same material is displayed as 'FORFAIT RÃPARATION'.
Since at Unix Level MATNR name is 'FORFAIT RÃPARATION', it will remain same when FTPed to another Unix Server and thats wrong
I am using following statement in my program to OPEN the file.
open dataset pa_file for output in text mode encoding default => Program behaves like above
open dataset pa_file for output in text mode encoding non-unicode . => it gives a dump, and in the output non-english characters are replaced by '#'.
Our SAP is ECC 6.0 and similar behaviour is observed for characters like
Ü
Á
ÿ
Any thoughts/ideas how to resolve it ?

Hi Rohan
Check these notes :
Note 547308 - Shortdump CONVT_CODEPAGE when displaying measure
Note 752835 - Usage of the file interfaces in Unicode systems
Note 1057289 - Reasons for CX_SY_CONVERSION_CODEPAGE / CONVT_CODEPAGE
Note 853665 - LSMW: Dump occurs when file imported from application server

Similar Messages

  • While activating the ODS i'm getting these errrors

    Hi All,
    While activating the ODS i'm getting these errrors,
    1) The creation of the Export Datasource failed
    2) RFC Connection to the source system is damaged --- no metadata upload
    3) Error when activating ODS object
    What would be the reasons.............?
    Plz Reply back me on [email protected]
    Regards,
    Kiran

    Hi,
    Im finding a similar issue but with task SDE_ORA_GLJournals,
    the code is :
    AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
    AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
    the parameters are also fine in the parameters file.
    Has anyone found a solution or an explanation for this?
    Thanks a lot, regards
    Nestor

  • Geting this errror, eventhough information is ok: We're sorry, the billing information on file could not be used for this payment. Please update your information.

    Geting this errror, eventhough information is ok: We're sorry, the billing information on file could not be used for this payment. Please update your information.
    And please remove one of my unassigned user.

    Are you 100% sure that every detail of your information is the same in each place?
    Make sure that EVERY DETAIL is the same in every place you enter your information
    -right down to how you spell and punctuate the parts of your name and address
    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -Credit card https://helpx.adobe.com/utilities/credit-card.html

  • Trying to install Adobe Premiere elements 12.  When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use.  Please close all running exe(s).  Nothing is runnin

    question:  Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

    Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • I am using elements 11. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    I am using elements 11 with Windows7. I cannot open editor because configuration error occurs with message "errror 213:11". What happened? What can I do? Thanks a lot for your support.

    See if this helps:
    Error "License store does not allow writing" | Install log | CS5, CS5.5

  • ABAP dump CONVT_CODEPAGE in ECC 6.0

    Hi,
    In ECC 6.0 the following error is coming while reading data from Unix file.
    <b>Runtime Errors         CONVT_CODEPAGE
    Except.                CX_SY_CONVERSION_CODEPAGE
    The termination is caused because exception "CX_SY_CONVERSION_CODEPAGE"
    occurred in
    procedure "GET_DATA_FROM_UXFILE" "(FORM)", but it was neither handled locally
    nor declared
    in the RAISING clause of its signature.</b>
    The program logic for opening dataset and reading is as shown below, dump is coming while reading dataset.
      OPEN DATASET INFILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      DO.
        READ DATASET INFILE INTO WA_workarea .
      ENDDO.
    Do we need to change the read command to avoid this dump in ECC 6.0?
    Thanks,
    Sreedevi

    I think syntax Open dataset option ENCODING DEFAULT in unicode system expects a file in UTF-8 encoding.
    It's dumping because read dataset failed to convert a character in the fil to UTF-16.
    You need to convert to UTF-16 before transfer
    try.
        call method cl_abap_conv_in_ce=>create
          exporting
            encoding    = gv_encoding
            endian      = gv_endian
            replacement = '#'
          receiving
            conv        = conv_obj.
        call method conv_obj->convert
          exporting
            input = gv_xstr
            n     = -1
          importing
            data  = gv_str.
      catch cx_root.
        message 'Error during conversion' type 'E'.
    endtry.
    aRs

  • Downgrade the ios 7.02 to 6.1.3 i have got errror 3194 show the solution

    downgrade the ios 7.02 to 6.1.3 i have got errror 3194 show the solution

    Downgrading the iOS version isn't supported by Apple.

  • CONVT_CODEPAGE : Abap Dump while using Transfer statment

    Hi,
    I am getting an abap dumb CONVT_CODEPAGE when the program is executed.
    It is encountered at the Transfer statement.
    The file is opened in legacy text mode.
    So i assume come characters in the file are not being interpretated using the existing system codepage,thus the dump.
    Pls let me know if my analysis is incorrect.
    Can anyone provide me with a workaround ?
    Answers will be rewarded.
    - Rohan

    Hi Rohan
    Check these notes :
    Note 547308 - Shortdump CONVT_CODEPAGE when displaying measure
    Note 752835 - Usage of the file interfaces in Unicode systems
    Note 1057289 - Reasons for CX_SY_CONVERSION_CODEPAGE / CONVT_CODEPAGE
    Note 853665 - LSMW: Dump occurs when file imported from application server

  • Error is "CONVT_CODEPAGE" and exception is "CX_SY_CONVERSION_CODEPAGE"

    Dear experts,
    How are you?
    The runtime error was occured as follows :
    1) Error : CONVT_CODEPAGE
    2) Exception : CX_SY_CONVERSION_CODEPAGE
    3) System Environment : R/3 470*110, non-unicode system
    4) Transaction : PA20
        Language Key : 3
        Program : CL_ABAP_CONV_IN_CE======CP
    5) Source code extract :
    000280         raise exception type cx_parameter_invalid_type
    000290           exporting parameter = paramstr type = typestr.
    000300       endif.
    000310     when 'C'.
    000320       len = strlen( uccp ).
    000330       if len <> 4.
    000340         paramstr = 'UCCP'.
    000350         typestr = len.
    000360         shift typestr right.
    000370         concatenate 'C(' typestr ')' into typestr.
    000380         raise exception type cx_parameter_invalid_type
    000390           exporting parameter = paramstr type = typestr.
    000400       endif.
    000410     when 'g'.
    000420       len = strlen( uccp ).
    000430       if len <> 4.
    000440         paramstr = 'UCCP'.
    000450         typestr = len.
    000460         shift typestr right.
    000470         concatenate 'STRING(' typestr ')' into typestr.
    000480         raise exception type cx_parameter_invalid_type
    000490           exporting parameter = paramstr type = typestr.
    000500       endif.
    000510     when others.
    000520       paramstr = 'UCCP'.
    000530       typestr = t.
    000540       raise exception type cx_parameter_invalid_type
    000550         exporting parameter = paramstr type = typestr.
    000560     endcase.
    000570     x = uccp.
         >     SYSTEM-CALL CONVERT ID 41
    000590                                          " EXPORTING
    000600       BUFFER x
    000610                                          " IMPORTING
    000620       DATA char
    000630                                          " CHANGING
    000640       CINFO cl_abap_conv_in_ce=>uccp_cinfo.
    000650   ENDMETHOD.
    I referenced the notes 864789,865885, and 832232.
    But I couldn't resolve it.
    Would you please help me?
    Thanks.
    Regards,
    Soyeon Rhee

    Dear Prashant,
    Thank you for your advice.
    The source code is as follows:
    Source code extract
    000280         raise exception type cx_parameter_invalid_type
    000290           exporting parameter = paramstr type = typestr.
    000300       endif.
    000310     when 'C'.
    000320       len = strlen( uccp ).
    000330       if len <> 4.
    000340         paramstr = 'UCCP'.
    000350         typestr = len.
    000360         shift typestr right.
    000370         concatenate 'C(' typestr ')' into typestr.
    000380         raise exception type cx_parameter_invalid_type
    000390           exporting parameter = paramstr type = typestr.
    000400       endif.
    000410     when 'g'.
    000420       len = strlen( uccp ).
    000430       if len <> 4.
    000440         paramstr = 'UCCP'.
    000450         typestr = len.
    000460         shift typestr right.
    000470         concatenate 'STRING(' typestr ')' into typestr.
    000480         raise exception type cx_parameter_invalid_type
    000490           exporting parameter = paramstr type = typestr.
    000500       endif.
    000510     when others.
    000520       paramstr = 'UCCP'.
    000530       typestr = t.
    000540       raise exception type cx_parameter_invalid_type
    000550         exporting parameter = paramstr type = typestr.
    000560     endcase.
    000570     x = uccp.
    >     SYSTEM-CALL CONVERT ID 41
    000590                                          " EXPORTING
    000600       BUFFER x
    000610                                          " IMPORTING
    000620       DATA char
    000630                                          " CHANGING
    000640       CINFO cl_abap_conv_in_ce=>uccp_cinfo.
    000650   ENDMETHOD.
    Contents of system fields
    SY field contents..................... SY field contents.....................
    SY-SUBRC 0                             SY-INDEX 0
    SY-TABIX 5                             SY-DBCNT 0
    SY-FDPOS 5                             SY-LSIND 0
    SY-PAGNO 0                             SY-LINNO 1
    SY-COLNO 1                             SY-PFKEY
    SY-UCOMM BACK                          SY-TITLE &#54532;&#47196;&#44536;&#47016; OM_START
    SY-MSGTY                               SY-MSGID
    SY-MSGNO 000                           SY-MSGV1
    SY-MSGV2                               SY-MSGV3
    SY-MSGV4
    Active calls / events
    No.... Type........ Name..........................
           Program
           Include                                  Line
           Class
        13 METHOD       UCCP
           CL_ABAP_CONV_IN_CE============CP
           CL_ABAP_CONV_IN_CE============CM003         58
           CL_ABAP_CONV_IN_CE
        12 METHOD       GET_UCCP_PREFIX_CONSTANTS
           CL_HROM_KEY_GENERATOR=========CP
           CL_HROM_KEY_GENERATOR=========CM00C         13
           CL_HROM_KEY_GENERATOR
        11 METHOD       CHECK_ARRAYTYPE_PREFIX
           CL_HROM_KEY_GENERATOR=========CP
           CL_HROM_KEY_GENERATOR=========CM007         17
           CL_HROM_KEY_GENERATOR
        10 METHOD       DELETE_DYN_ARRAYTYPE
           CL_HROM_KEY_GENERATOR=========CP
           CL_HROM_KEY_GENERATOR=========CM005         17
           CL_HROM_KEY_GENERATOR
         9 METHOD       DELETE_ONE_QUERY
           CL_HR_ST_COLUMNS_BASE=========CP
           CL_HR_ST_COLUMNS_BASE=========CM00L         17
           CL_HR_ST_COLUMNS_BASE
         8 METHOD       DELETE_ONE_SELECTION
           CL_HR_ST_ADHOC_SELECTION======CP
           CL_HR_ST_ADHOC_SELECTION======CM006         28
           CL_HR_ST_ADHOC_SELECTION
         7 METHOD       CLEAN_UP
           CL_HR_ST_ADHOC_SELECTION======CP
           CL_HR_ST_ADHOC_SELECTION======CM001         74
           CL_HR_ST_ADHOC_SELECTION
         6 METHOD       IF_HR_SEARCHTOOL_FAVORITES~END_OF_OBJECTMANAGER
           CL_HR_ST_ADHOC_SELECTION======CP
           CL_HR_ST_ADHOC_SELECTION======CM00D          6
           CL_HR_ST_ADHOC_SELECTION
         5 METHOD       DESTROY
           CL_HR_OBJECTMANAGER===========CP
           CL_HR_OBJECTMANAGER===========CM002         76
           CL_HR_OBJECTMANAGER
         4 FUNCTION     NF_GM_CALL_OBJMAN_FUNCTION
           SAPLOM_NAVFRAMEWORK_OO_OBJ
           LOM_NAVFRAMEWORK_OO_OBJU10                  72
         3 FORM         EM_EVENT_TO_CURRENT_OBJECTS
           SAPLOM_NAVFRAMEWORK_OO_OBJ
           LOM_NAVFRAMEWORK_OO_OBJF03                 171
         2 FUNCTION     NF_GM_CREATE
           SAPLOM_NAVFRAMEWORK_OO_OBJ
           LOM_NAVFRAMEWORK_OO_OBJU12                 292
         1 EVENT        START-OF-SELECTION
           OM_START_NF
           OM_START_NF                                 19
    I appreciate your help.
    Best regards,
    Soyeon Rhee

  • LOAD_PROGRAM_LOST and  CONVT_CODEPAGE

    Hi Guys! Need very urgent help , may be someone knows this.
    In today our Prod. server has gone mad . In sm21 and st22 are many dumps(> 1000 , and new every 3-5 second) and errors like :
    LOAD_PROGRAM_LOST and  CONVT_CODEPAGE.  From users side the T-codes are reset
    "The program is changed during performance" (i'm see on russian language,It is a literal translation as I shall see in English I shall tell literally). Any help is rewarded. Regards.

    Hi Juan Reyes.
    Yesterday i can't replay to you, the unknow error are on my browser................
    Yes trasport are imported, also the Prepare are start (befor we start Prepare and all ok). In DDXTT we find 460 fields, after some actions we could force will proceed Prepare, (before it's hangs between the phases TOOLIMPD1 and NPREPCRE0 where we can't reset Prepare). All is now good. Thanks and regards.

  • CONVT_CODEPAGE

    Hi All,
    I am running a program which reads the file on Application server and makes changes / addition to this file. But In Production environment, while reading the second record of the file it throws the error "CONVT_CODEPAGE".
    However this programs runs smoothly in other environment with the same file as an input.  Could any one please help me out with kind of action required to take?
    Thanks in advance,
    Jigar

    hi
    good
    Catchable Exceptions
    CX_SY_FILE_OPEN
    Cause: The file is already open (only in Unicode programs)
    Runtime Error: DATASET_REOPEN
    CX_SY_CODEPAGE_CONVERTER_INIT
    Cause: The required conversion is not supported (because you specified an invalid code page or a language with SET LOCALE LANGUAGE not supported during conversion).
    Runtime Error: CONVT_CODEPAGE_INIT (catchable)
    http://www.s001.org/ABAP-Hlp/abapopen_dataset.htm
    reward point if helpful.
    thanks
    mrutyun^

  • JspException: Input/output errror: SocketException: Connection reset by pee

    In weblogic 8.1, getting below exception often,
              javax.servlet.jsp.JspException: Input/output errror: java.net.SocketException: Connection reset by peer.
              at org.apache.struts.util.ResponseUtils.write method
              Although no problem, but it seems to slow down.
              Technology used is mix of jsp, servlets & struts framework
              Any comments will be highly appreciated

    I also experience this. I have wenlogic 8.1sp6.
              It was affecting one part of my application in that no data is being returned. I had to stop and restart the server to get connection going again. I notice no one with weblogic 9 has the problem. I may upgrade to version 9 soon if that will help to solve this problem.

  • Errrors while buliding"\Desktop\Flash Player\Source" of AdobeAccess

    Hi, I am trying to rebuild the "AdobeAccessPro4-setup\Reference Implementation\Sample Video Players\Desktop\Flash Player\Source" by using "Flash® Builder™® 4.7" and Flex4.6 SDK, But I couldn't able to rebulid it because of following errors, Can anybody advice to fix those errors?
    * 1046: Type was not found or was not a compile-time constant: VideoSurface.    in VideoInfoPanel.mxml
    * 1046: Type was not found or was not a compile-time constant: VideoSurfaceInfo. in VideoInfoPanel.mxml
    * 1119: Access of possibly undefined property netGroup through a reference with static type org.osmf.net:NetStreamLoadTrait.    VideoInfoPanel.mxml
    * 1120: Access of undefined property OSMFSettings.    VideoInfoPanel.mxml    
    * 1120: Access of undefined property VideoSurface.    VideoInfoPanel.mxml    
    * 1172: Definition org.osmf.media.videoClasses:VideoSurface could not be found.    VideoInfoPanel.mxml    
    * 1172: Definition org.osmf.media.videoClasses:VideoSurfaceInfo could not be found.    VideoInfoPanel.mxml
    * 1172: Definition org.osmf.utils:OSMFSettings could not be found.    VideoInfoPanel.mxml

    Hi Hiroshi,
    Thanks for your prompt response. You are right.
    It's ok now, after I added SWC Folder "..\OSMF" at Flex Build Path of
    Project Properties
    Thanks & Regards
    Soe
    From: Hiroshi Okugawa [email protected]
    Sent: Wednesday, 12 February, 2014 11:37 PM
    To: ANSoe
    Subject: Errrors while
    buliding"\Desktop\Flash Player\Source" of AdobeAccess
    Re: Errrors while buliding"\Desktop\Flash Player\Source" of AdobeAccess
    created by Hiroshi Okugawa
    <http://forums.adobe.com/people/Hiroshi%40Adobe>in *Adobe
    Access DRM / Primetime DRM* - View the full
    discussion<http://forums.adobe.com/message/6113423#6113423

  • Investment order settlement rule Errror

    Dear All,
    While creating an Investment order, system will ask for creation of AUC asset if investment profile in assigned to the Order and creates an AUC asset with autoomatic generation of settlement rule.
    But when i m trying to create the said order with investment profile attachment, and AUC creation system is not allowing me to save the order with errror as below:
    Enter a distribution rule for Asset without a validity limit
    Message no. KD059
    Diagnosis
    The settlement profile used requires you to define a distribution rule for Asset. For period 003 2011, however, you have not created a distribution rule for Asset.
    Procedure
    Create a distribution rule for Asset without a validity limit, because, if the distribution rule does have a validity limit, the system always issues this message in the period following the last valid period.
    You can also use a different settlement profile that does not require such a distribution rule, or change the settlement rule used.
    Can you pls let me know what is the cause of this error message,
    Thanks & Regards,
    Ravi

    Dear Ajay,
    I have not manually created settlement rule as it is an Investment order to which Investment profile is assigned.
    When Order is created, system will prompt for AUC creation. I have done that but when saving it is showing this error.
    System will create Settlement rule automatically to this investment order, which is not happening in my case though i have assinged Investment profile.
    Pls advise
    thanks,
    ravi

  • What is Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154

    If Can, Please Help!
    I received the following System Error while trying to update Adobe Reader 8:
    Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154
    I'm running Home Vista Premium

    Have no clue. However, this is not the Reader forum either. It may be that you do not have permission to do the update (probably need to be the administrator) or you have anti-virus running. If it is really an OS error, then maybe the question needs to be asked in a MS forum.

Maybe you are looking for

  • ABAP Program back ground scheduling issue.

    Hi experts, I am trying to execute a ABAP program in a process chain but the job log shows me the following message "Object XXXXXXX of class RE and language PT not exist" XXXXX is the ABAP program name. Even i tryed to excute the ABAP program itself

  • Kensington mouse scroll will not work in firefox but does in other apps

    In all other application my scroll works fine, but in Firefox it will not work. I have tried switching the settings and still got nothing. I also check for driver updates on the mouse driver but they are up to date. Running XPSP3

  • PDF Optimizer in Acrobat Pro X1

    Where are the same file minimizing functions that exist in PDF Optimizer in Acrobat Pro 9 found in X1? So frustrating. I work in Illustrator and am dependent on this function to get files down to a reasonable size for sending to print, the client and

  • Import Falied in TEST Server

    I ried importing the SCA in the test server I got the following error :- ======================================================= Info:06/06/02 20:29:39 -  Start updating EAR file... Info:06/06/02 20:29:39 -  start-up mode is lazy Info:06/06/02 20:29:

  • Custom Table - New Field

    Added SPART in a custom table , I am trying to retrieve an entry from that table where SPART is SPACE. This works fine in DEV, in Q system the select does not work.. What could be the reason ?