COOIS: Additional Selection Screen

Hello Experts,
Is it possible to add additional fields in the selection screen of COOIS?  For example, I want to add start time (not start date) in the selection screen.
Please advice.
Regards
Tom

HI
there is BADI available  for you requirment.
check in SPRO Production->Shop Floor Control-->BAdI: PP and PI Order Information System.
here there i soption to meet your requirment.
pl check the documentation for this
-ashok

Similar Messages

  • Hr report selection screen ..

    Hi ...
    Is there anybody knows how can change or remove hr report's selection screen .Please find below selection screen but I guess according to usega of logical database it gets additional selection screen .So by this selection screen (log, db) report goes on LDB .

    See the following ex: i have done it for SDF ldb
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-GROUP3 = 'IXS'.
          SCREEN-ACTIVE = '0'.
          SCREEN-INVISIBLE = 1.
          MODIFY SCREEN.
          CONTINUE.
        ELSEIF SCREEN-GROUP4 = '023'.
          SCREEN-ACTIVE = '0'.
          SCREEN-INVISIBLE = 1.
          MODIFY SCREEN.
          CONTINUE.
        ELSEIF SCREEN-NAME = 'DD_BUKRS-LOW'.
          SCREEN-REQUIRED = '1'.
          MODIFY SCREEN.
          CONTINUE.
        ELSEIF SCREEN-NAME = 'DD_BUKRS-HIGH'.
          SCREEN-ACTIVE = '0'.
          SCREEN-INVISIBLE = 1.
          MODIFY SCREEN.
          CONTINUE.
        ELSEIF ( SCREEN-GROUP3 = 'VPU'
            AND SCREEN-GROUP4 = '007' ).
          SCREEN-ACTIVE = '0'.
          SCREEN-INVISIBLE = 1.
          MODIFY SCREEN.
          CONTINUE.
        ELSEIF SCREEN-NAME = 'DUEDATE1'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
          CONTINUE.
        ENDIF.
      ENDLOOP.

  • LDB  PNP, selection screen, org structure field name ?

    Hi,
    Generally, what are the names of the additional selection-screen fields? There are twenty odds pnp...., the standard ones. But what is the name of the org. structure, the 4th button selection options group fiels? (I need ids of all Org units from org. structure subtree, or the root org id at least)
    Thanks,
    Piotr

    ...this it is with headerline...
    Sergey big spasiba
    Piotr

  • ABAP Query Selection screen parameters

    I need to add an additional selection screen parameter  in existing ABAP Query. How to modify the selection screen fields in existing ABAP query ? Kindly help me.

    Hi,
    GO to info set transaction SQ02
    Give the infoset
    Press change
    Press the selections button..Shift F7
    In the right hand side you will get a table control to enter the selection screen parameters..
    Press create button on top of the table control to create new parameters
    Thanks,
    Naren

  • Process open items: how to set defaults for the additional selections

    Hi FI experts,
    Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
    I am using transaction F-04 (or F-06 or F-07) to post with clearing.
    When processing the open items I can use additional selection parameters. In my case I need to use the document type.  I would like to save this selection as a default but this doesn't seem to be possible.
    1. it is not possible to save a variant for the processing of open items
    2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
    Do you see another way to store defaults for the additional selections in open item processing?
    Thanks a lot.
    Dimitri

    Hi,
    When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable.  Hence SHD0 is not going to help.
    As said above, either you can change the additional selection screen parameters, but here again you can't default the value.  You can only reduce the number of entries on the screen.
    Else you can create a custom transaction code by copying the standard.  Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements. 
    Please check this link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
    In the above link, in navigation choose clearing -- Specifications for processing open items
    If it is a custom transaction then you can default document number.
    Regards,
    Ravi

  • Help On Selection Screen

    Hi...Can any one send a sample code for a header selection screen calling a detail screen and edit the detail.
    Sunil....

    Hi Sunil..
    This is the code:
    *& Report  ZSELFILE1                                                   *
    *& CALLING SELECTION SCREEN AND F4 HELP                                                                    *
    REPORT  zselfile1                               .
    TABLES:sscrfields.
    **Create the Additional Selection screen to input filename
    SELECTION-SCREEN: BEGIN OF SCREEN 10.
    PARAMETERS: p_file TYPE rlgrap-filename.
    SELECTION-SCREEN: END OF SCREEN 10.
    **Create Application Toolbar Button on the Standard selection Screen
    SELECTION-SCREEN FUNCTION KEY 1.   "Its fcode will be FC01
    PARAMETERS : p_werks TYPE marc-werks.
    INITIALIZATION.
      sscrfields-functxt_01 = 'Enter File'.  "Assign the Text to the Button
    AT SELECTION-SCREEN.
      CASE sscrfields-ucomm.  "Check the Fcode
        WHEN 'FC01'.
    **Details Selection Screen
          CALL SELECTION-SCREEN 10 STARTING AT 5 8 ENDING AT 85 20.
      ENDCASE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CALL FUNCTION 'F4_FILENAME'    "Local file browser
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
          field_name    = 'P_FILE'
        IMPORTING
          file_name     = p_file.
    START-OF-SELECTION.
    <b>reward if Helpful.</b>

  • Additional field in selection screen of a abap query

    Hi,
    I am adding a new additional field in the selection screen through abap query(using transaction SQ02) which is of type VBRK-FKSTO.
    The value entered can be 'X' or empty space.But the value which is entered in the selection screen is not getting reflected in the code.Kindly advice me on what needs to be done to capture the selection screen value in the code.
    Regards,
    S.Subasree

    Hi
    You can add new field in VFX3 selection screen as follow. In the report code we can see various explicit enahcement points provided by SAP.One of them is ENHANCEMENT-POINT sdblbddl_01 SPOTS es_sdblbddl STATIC. Here you can declare your selection screen parameters.  Then in the processing i can see a call customer fucntion happening in VBSK_DISPALY which you can implement to add your logic.
    Thanks
    Nabheet

  • Custom field in COOIS selection screen

    Hi all,
    how do I add a custom field (IOHEADER-ASTTX, User status) in the COOIS selection screen ?
    Thank's
    Edited by: Marco De Caro on Dec 6, 2011 2:15 PM
    Edited by: Marco De Caro on Dec 6, 2011 2:16 PM

    Hi,
    Use the BADI : WORKORDER_INFOSYSTEM
    Method: TABLES_MODIFY_LAY
    In the method TABLES_MODIFY_LAY there are many table parameters for different data display of the production order.In this scenario only the header detail structure is being extended with append structure. 
    Add the extra fields to be displayed to through append structure to IOHEADER_TAB.
    Example code :
    DATA : BEGIN OF st_matkl,
               matkl TYPE matkl,
               END OF st_matkl.
      DATA : st_header TYPE ioheader.   LOOP AT ct_ioheader INTO st_header.
        IF NOT st_header IS INITIAL.
          SELECT SINGLE  matkl
                 FROM mara
                 INTO st_matkl
                 WHERE matnr = st_header-matnr.
        ENDIF.
        st_header-matkl = st_matkl-matkl.
        MODIFY ct_ioheader FROM st_header.
      ENDLOOP.
    When you run the report will be able to see the added field in the ALV.
    Thanks,
    Shailaja Ainala.

  • COOIS - new field  tobe added in selection screen

    My requirement is ' batch field shud be added in COOIS Selection screen & output shud come for given batch '.
    can anyone give the details .

    Hi,
    You have to customize the Program according to business requirement.
    You can copy as ZCOOIS and assign a Tcode for that and do the necessary modifications as per need.
    Regards
    Arbind

  • COOIS selection screen

    Hi all,
    in the selection screen of transactio COOIS, can someone explain to me the difference between 'List' field and 'production orders' / 'planned orders' ?
    Thanks

    Dear Pete,
    In the list field we have different options like components, goods movement.... etc
    Now if we select components and execute you can get all components against production order in plant
    If we go with goods movement then after executing we get all the GI/GR happened in the plant
    Regards
    Madhu

  • Addition of checkbox and 2 fields in ABap query selection screen

    Hi
    I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

    Hi Tarun,
    I am still not clear with the problem..I guess you require plant in your selection screen which you have.
    i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
    have you selected all the fields in infoset and made a selection screen?
    When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
    Let me know...
    Regards,
    Nihkil.

  • Re:addition of fields in selection screen

    hi good morning to all,
    i want to add two fields in selection screen.these two are
           Service Representative ZQ
           Customs  Representative ZG.
    i want logic how to add these fields to output.
    from these two i want to fetch the correponding pernr(field in vbpa i.e personal number)
    please give me the solution as early as possible
    thanks

    Hai,
        If it is a report you can add the two field either as select option or parameter.
    Regards,
    Umasankar

  • Additional Fields on Selection Screen of VF04

    Hi,
    I need to add a new field to selection screen of VF04. How can i achieve this?
    Regards,
    Jayant
    Edited by: jayant vikram on Oct 6, 2009 9:15 PM
    Moderator message - This is almost a duplicate - post locked
    Edited by: Rob Burbank on Oct 6, 2009 11:49 AM

    Hi,
    I need to add a new field to selection screen of VF04. How can i achieve this?
    Regards,
    Jayant
    Edited by: jayant vikram on Oct 6, 2009 9:15 PM
    Moderator message - This is almost a duplicate - post locked
    Edited by: Rob Burbank on Oct 6, 2009 11:49 AM

  • LIS: How to put an additional selection-field into sel-screen

    Hi LIS-Gurus,
    I have a self-defined information structure with a method for list enhancement. In this method I want to calculate values. So far so good.
    The problem is: for the calculation I need a date. The user should be able to enter this date in the selection-screen of the standard-analysis (MCSI).
    Is there any chance to define a parameter or select-option, that can be readout in the method? The field should only be used to allow the user to enter a date. There must be now selection in any kind for that field...
    Thanks in advance for your hints!
    Nicole

    please modify the layout of screen 1s00 of programm SAPMF05A in SE80 accordingly.
    Regards,
    Attila

  • Selecting open items in F-03 using additional selections

    I need to select open items in a GL account using more than one additional selection eg. document type, posting date, assignment
    I select Additional Selections then document type then add a document type, then I select Other Selection - posting date and then Process Open Items. Only the first selection for document type is recognised.
    Is this a bug?
    Edited by: Richard Somerset on Jan 7, 2009 5:14 PM

    However SAP help suggest that this can be done
    Searching for Open Items  
    Use
    After you have entered an account with open items, you can search for specific open items to be cleared.
    On the screen for selecting open items, you can search for specific open items to be cleared using the following additional selection fields:
    Gross amount
    Document number
    Posting date
    Other fields depending on the system configuration
    Procedure
    To search for open items using the additional selection criteria, proceed as follows:
    Choose one of these fields, such as Posting date, then choose Execute.
    The screen for entering selection criteria appears.
    Enter one or more single values or ranges within the selection, such as 01/01/1993 through 01/31/1993 for a range of posting dates.
    To search for specific open items by other criteria (optional), choose Edit ® Select more.
    Repeat steps 1 and 2 for the other selection criteria.
    After you enter your selection criteria, you have the following options:
    Display the list of open items by choosing Goto ® Open items.
    Display the clearing document header and the items entered so far by choosing Goto ® Doc. Overview.
    Post the clearing document by choosing Document ® Post
    Edited by: Richard Somerset on Jan 8, 2009 9:05 AM

Maybe you are looking for