COOIS selection screen

Hi all,
in the selection screen of transactio COOIS, can someone explain to me the difference between 'List' field and 'production orders' / 'planned orders' ?
Thanks

Dear Pete,
In the list field we have different options like components, goods movement.... etc
Now if we select components and execute you can get all components against production order in plant
If we go with goods movement then after executing we get all the GI/GR happened in the plant
Regards
Madhu

Similar Messages

  • Custom field in COOIS selection screen

    Hi all,
    how do I add a custom field (IOHEADER-ASTTX, User status) in the COOIS selection screen ?
    Thank's
    Edited by: Marco De Caro on Dec 6, 2011 2:15 PM
    Edited by: Marco De Caro on Dec 6, 2011 2:16 PM

    Hi,
    Use the BADI : WORKORDER_INFOSYSTEM
    Method: TABLES_MODIFY_LAY
    In the method TABLES_MODIFY_LAY there are many table parameters for different data display of the production order.In this scenario only the header detail structure is being extended with append structure. 
    Add the extra fields to be displayed to through append structure to IOHEADER_TAB.
    Example code :
    DATA : BEGIN OF st_matkl,
               matkl TYPE matkl,
               END OF st_matkl.
      DATA : st_header TYPE ioheader.   LOOP AT ct_ioheader INTO st_header.
        IF NOT st_header IS INITIAL.
          SELECT SINGLE  matkl
                 FROM mara
                 INTO st_matkl
                 WHERE matnr = st_header-matnr.
        ENDIF.
        st_header-matkl = st_matkl-matkl.
        MODIFY ct_ioheader FROM st_header.
      ENDLOOP.
    When you run the report will be able to see the added field in the ALV.
    Thanks,
    Shailaja Ainala.

  • COOIS - new field  tobe added in selection screen

    My requirement is ' batch field shud be added in COOIS Selection screen & output shud come for given batch '.
    can anyone give the details .

    Hi,
    You have to customize the Program according to business requirement.
    You can copy as ZCOOIS and assign a Tcode for that and do the necessary modifications as per need.
    Regards
    Arbind

  • COOIS: Additional Selection Screen

    Hello Experts,
    Is it possible to add additional fields in the selection screen of COOIS?  For example, I want to add start time (not start date) in the selection screen.
    Please advice.
    Regards
    Tom

    HI
    there is BADI available  for you requirment.
    check in SPRO Production->Shop Floor Control-->BAdI: PP and PI Order Information System.
    here there i soption to meet your requirment.
    pl check the documentation for this
    -ashok

  • How to set default variant for selection screen

    Hi,
    I want to make one variant as default for selection screen for one user.
    For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
    I am not seeing any way to do this. please help me..
    Thanks
    Srini

    Hi,
    If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
    This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
    Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
    This will solve your problem and you can make n number of variants and assign it to different users.
    Regards,
    Arpit

  • How to put F4 facility in the selection screen using

    <i><b>HI Experts,
    i have a query ..
    i want to put F4 facility in the selection screen and The F4 help  for the order number (chvw-aufnr) on the selection screen should be the same like the F4 help for order number in transaction COOIS.. PLease provide support in this regard.
    Its urgent..An early reply will be highly appreciated.
    Regards.
    Neeraj</b></i>

    See the following ex:
    TYPES: BEGIN OF TY_MBLNR,
            MBLNR LIKE MKPF-MBLNR,
          END OF TY_MBLNR.
    DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
    data: it_ret like ddshretval occurs 0 with header line.
    At selection-screen on value-request for s_mat-low.
      Select MBLNR from mkpf into table it_mblnr.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
      DDIC_STRUCTURE         = ' '
          RETFIELD               = 'MBLNR'
      PVALKEY                = ' '
      DYNPPROG               = ' '
      DYNPNR                 = ' '
      DYNPROFIELD            = ' '
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
         VALUE_ORG              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
      MARK_TAB               =
    IMPORTING
      USER_RESET             =
        TABLES
          VALUE_TAB              = IT_MBLNR
      FIELD_TAB              =
         RETURN_TAB             = IT_RET
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF SY-SUBRC = 0.
        read table it_ret index 1.
        move it_ret-fieldval to S_mat-low.
      ENDIF.

  • VL10 and new selection-screen fields

    Hi experts.
    My requirement is to add new selection-screen field to second tab in VL10.
    After analyse many topics the solution was to copy VL10 to ZVL10.
    Also V50R_USEREXIT_TRANSF was copyed and there was added specific code.
    Furthemore note:524424 was implemented (header in form definition in  V50R_USEREXIT_TRANSF ), and the SHP_VL10_SELECT_OPTIONS was enhanced. As I understood from this stage we have selection-criteria in repeort.
    The problem is that I don't know how to transfer this data to ALV.
    Any tips ?
    Thanks .
    Daniel.

    hi
    how did you do that. i have to add select options in coois tcode  in header and operational level.but only using badi. using screen enhancement it is possible bt how to do that using bagi "workorder_infosystem"..
    please help me out..

  • Regarding Selection Screen field making display field  in ALV report

    Hi All,
               In ALV Report,  at runtime how can i make the field as Display Field in selection screen .
    Thks & Regds
    Shailesh

    hii,
    Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
    1.demo_dynpro_modify_simple
    2.demo_dynpro_modify_screen
    if tou are using grid,u can refer to foll link
    sequencing / choosing fields in report screen at runtime,
    Display the Columns in the grid at run time
    rgrds,
    Shweta

  • Help Needed in At selection screen output

    Hi Experts,
    I need your help in AT SELECTION SCREEN OUTPUT event. My issue is i have 4 radio button and with each radio button couple of parameters that need to be filled in selection screen of report. My requirement is that sometimes user enters details in second radio button parameters but forgot to change the radio button to second one so kindly suggest a solution so that radio button gets selected as per user input in parameter like if user clicks on certain parameter to enter value then automatically corresponding radio button gets selected.
    Thanks in advance for all your help.

    example from a checkbox in one of my progs..but you can do same approach with radio butts
    parameters p_test as checkbox default abap_on user-command test.
    at selection-screen.
        if sy-ucomm = 'TEST'.
          perform birth_mnth_chck.
        endif.

  • Help needed in selection screen - Urgent

    Hi Experts,
    I have a selection screen. I have three radi buttons in that selection screen. Based on the selection of the radio buttons I need to activate corresponding selection screen parameters.
    e.g : if radiobutton1 is selected, njo activation needed,
           if radiobutton2 is selected, activate selection screen parameter p_one,
           if radiobutton3 is selected, activate selection screen parameter p_two.
    All three radiobuttons are attached to the same radio button group.
    I have assigned the parameters p_one, p_two, p_three to MODIF ID as follows.
    p_one - NULL
    p_two - t01
    p_three - t02.
    on the selection of a radio button I want the corresponding parameter to get activated.
    please help me.
    Regards,
    Arul jothi A.

    hi
    jothi
    AT SELECTION-SCREEN OUTPUT.                                      
      CASE SY-TCODE.                                                 
        WHEN 'ZEDI6'.                                                
          LOOP AT SCREEN.                                             
            CASE SCREEN-GROUP4.                                      
              WHEN '001'.                  "Sales order select       
                SCREEN-ACTIVE = '1'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                       
              WHEN '002'.                  "Delivery select          
                SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                        
              WHEN '003'.                  "Invoice select           
                SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                       
              WHEN '004'.                  "PO Select                
                SCREEN-ACTIVE = '0'.       "1=Active, 0=Don't display
                MODIFY SCREEN.                                       
    regards
    praveen

  • Compare the input filename in the selection screen

    In the selection screen input field
    there is an option of selecting the directory and file name and not the extension .
    This is used to download the datas
    Extension can be selected by using the option button
    rtf
    csv.
    the user has to give only  the filename and not the extension.
    suppose if the user input is C:\temp\file1.rtf.
    Either i should take only the filename
    or i should display the message give only the filename and not the extension . its already been selected!!!!
    I want to compare the input string contains  .doc
    how to do the comparison and to get the above results mentiond
    Thanks in advance

    Because the requirment is there are two option buttion for selecting the download file format
    But unknowingly if the user gives the filename along with the extension. I need to handle that error
    giving some error message or information message
    By comparing the last 4 letters of the filename.. either.doc or rtf or csv or watever
    so how to do that
    then after comparing that i should give the user a msg doc type is already selected give only the filename
    I hope u understand my req

  • Change selection screen in LDB (KDF logical database - NOT HR)

    Hi All,
    Iu2019d like to use KDF logical database to keep the dynamic selections since user wants to use it but I need to change the selection screen itself. The existing variants for KDF donu2019t meet the user requirements. Some fields I need to hide some add. Like I want to u201Cremoveu201D the field u2018Posting periodu2019 (MONAT) (which is available in dynamic selection screen) and put it on the u201Cmainu201D selection screen.
    Do I need to create my own logical database or there is a way around?
    Could someone give me a practical advice or sample of solution?
    Thanks a lot.

    Thanks Himanshu,
    I did as you suggested but problem is that it does not allow me to hide the whole block.
    I have 3 filelds actually on block KD_0 I need to hide (its from selection screen of KDF logical database.)
      SELECT-OPTIONS: KD_LIFNR FOR LFA1-LIFNR MATCHCODE OBJECT KRED.
      SELECT-OPTIONS: KD_BUKRS    FOR  LFB1-BUKRS.
    SELECTION-SCREEN END OF BLOCK KD_0.
    PARAMETERS KD_INDEX AS SEARCH PATTERN FOR TABLE LFA1.
    What I did is below.  I used sp instead of  u201C=u201D since it has many screen for field KD_LIFNR(for frame, text etc).
    And when I did just for KD_LIFNR it was hidden but when I did the same for KD_BUKRS it was not hidden . The field has stars u201C*********u201D in it.
    Same happen with KD_INDEX. The name of the field is hidden but field not and it filled with ********. Do you have any ideas what it can be?
    I debugged it to catch all screen names but no luck
      loop at screen.
        if screen-name cp 'KD_LIFNR' or
        screen-name cp 'KD_BUKRS' or
        screen-name cp 'KD_INDEX' or
        screen-name = '%B000003_BLOCK_1000' or       
        screen-name = 'SSCRTEXTS-FRAME_TEXT' or
        screen-name = 'SSCRTEXTS-MCID_TEXT' or
        screen-name = 'SSCRTEXTS-STRNG_TEXT' or
        screen-name = 'SSCRFIELDS-SEARCH_BTN' or
        screen-name =  '%B025008_BLOCK_1000' or
        screen-name =  '%F021010_1000' or
        screen-name =  'ALCUR' or
        screen-name =  '%F022012_1000' or
        screen-name =  'EXCDT' or
        screen-name = 'SSCRFIELDS-UCOMM'.
          screen-invisible = '1'.
          modify screen.
        endif.
      endloop.

  • How to define our own selection screen for logical database  in abap-hr?

    Hi Friends,
    Can u please help me
    How to define your own selection screens for  logical database.
    we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using  customer table like t599c, t599f and how to add to my logical database?
    Thanks in advance
    charan

    check out this online help
    http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
    Regards
    Raja

  • Need to restrict selection screen entries in logical database in HR report

    After creating custom HR Report Category using Logical database, I need to restrict the options available in the in the selection Screen
    for example- for company code i m getting 182 entries, but after running the program, selection-options for company code, i need only first 3 entries, don't want remailing entries
    how can i do this?

    Hi
    You can retrieve the required entries into an internal table and use FM F4IF_INT_TABLE_VALUE_REQUEST to provide them under F4 help.
    Regards
    Raj

  • Selection Screen in Report Painter

    Dear Experts,
    I have an issue in the report painter. While executing the report from GRR2, selection screen is not displayed but report is coming as I expected.
    I want to create the selection screen for this report. I have created this report without copying from the standard report.
    Thanks in Advance.
    Regards,
    Aswimn

    Hi,
    Please refer following links.
    <Link farm removed by moderator>
    Regards,
    Renuka S.
    Edited by: Vinod Kumar on May 25, 2011 10:12 AM

Maybe you are looking for