COPA: PGI not generating  COPA document

Hi
I am using costing based COPA.. I know that in this type of COPA, the Cost of Sales [COS] GL account is not created as Cost element.. But, I am fed up of reconciliation between FI and COPA due to timing gap between PGI and billing..
So, I created the COS a/c as cost element category 1, In Okb9 made the PSG (Prof Segment) as default CO Object and also mapped this Cost element to a Value field in FI PA transfer structure
When I do PGI, system generates only FI doc and Controlling document.. No COPA document is generated
In FI doc, system populates the PSG in COS line item and in Controlling doc, the Object Type is REO (Reconciliation Object)....however, no COPA doc is generated despite this
Can I generate a COPA doc at the time of PGI?? I know that it will duplicate COGS in COPA, but I am taking care of that by mapping to a different value field
I tried using the cost element categories 1 and 12 both.... But the COPA document is not getting generated
Any inputs??
Regards, Ajay
Edited by: Ajay Maheshwari on May 25, 2009 1:35 PM

Hi Santosh
I agree to what you have said.. But, I want to take it to COPA by way of creating it as cost element and doing the settings in OKB9... Also, I mapped it to a value field in PA Trf Str
Is it possible that using the record type B system generates a COPA doc
Why I feel it shud/can get generated is that when we change the std cost, system posts revaluation if inventory exists.. This revaluation amount can be taken to COPA by way of same settings in OKB9 and PA transfer Str..
Similarly, I am trying for PGI.... Dont know why system is not generating COPA doc?
Any ideas whether it can be technically done??
Ajay

Similar Messages

  • Materail document is not generating accounting documents

    friends,
    some materail documents are not generating fi documents, because of this materiel values are not matching with finance values,
    what could be the reason, all are capital items.
    regards,

    If the material is a not valuated material, then it might not generate accounting document. Compare this material with any other material with which you were able to generate financial documents.

  • Cancellation document does not generate Accounting document

    Hi Experts,
        I am facing an issue that when a Billing document is getting cancelled through workflow ,the billing document does not generate a accounting document .I tried debugging the issue to check it but could not find the root cause of the issue.
    In the code we are using 'BAPI_BILLINGDOC_CANCEL1 to cancel the billing document.
        How to find that the accounting documents are getting  generated from the corresponding billing documents correctly.
    Thanks&Regards,
    Praveen

    First of all, are you able to create S1 type cancellation document after you call the BAPI? If you are not even able to generate the cancel document, perhaps you are missing committing the BAPI after calling it by using BAPT_TRANSACTION_COMMIT.
    Also are you able to create cancellation and accounting document by calling the BAPI through a test ABAP program? First check it out before using it in your workflow.

  • VF01-- Billing not generate accounting document

    Hi, experts.
    I have one sale order using billing plan. the plan include three down payment request and one closing invoice.for the first and second down payment request,using transaction 'VF01' generate accounting document, but for the third down payment request ,but using transaction 'VF01' to create billing ,there isn't accounting document to generate?
    Thanks
    Fanny.

    UP!

  • BAPI_ACC_DOCUMENT_POST not generating accounting document

    HI All
    I'm calling function module 'BAPI_ACC_DOCUMENT_POST'
    to upload accounting dcoument data and passing below parameters for header section. I'm getting 605 success message in RETURN table, but accounting document is not being generated.
    obj_type = FKKSU
    obj_KEY = '$'
    obj_sys = t000-logsys.
    Message is here:
    S   |RW                  |605   |Document posted successfully: FKKSU $ PRO
    Kindly suggest me what could be the problem.
    Thanks in advance,
    Vijaya

    Hi ,
    You need to execute BAPI_TRANSACTION_COMMIT after this Function module.
    otherwise go to before executing BAPI BAPI_ACC_DOCUMENT_POST
    go to 'Function Modules ->other Function module -> ( enter BAPI_TRANSACTION_COMMIT) and then choose SAVE.
    now execute your test variant BAPI_ACC_DOCUMENT_POST.
    Hope this helps you.
    Thanking You.
    Kind Regards,
    Ravi Sankar.Z

  • Can not generate XML Document Template

    I have the below class
    public class MyHome implements Serializable {
    ArrayList rooms;
    //getter/setter methods here
    When I right click mouse and select "Generate XML Template Document", I got the error
    Some fields could not be generated to the XML template
    c:\e200\dv900\java\classes\java\util\ArrayList.class (The system cannot find the path specified)
    Do you have any idea?

    Not with the info given...
    Which jdev version?
    Where do I find this menu, as I don't see it?
    Timo

  • Accounting Document was not generated

    Hi Friends,
    While doing Post goods issue, Material document was created but system does not create accounting document.
    One sales order having two items (10&20)
    Both iteams having same material
    In case of items number 10(system generate accounting document)
    In case of Item number 20(System does not generate accounting document)
    What could be the reason..
    Please help me....
    Thanks
    NPR

    Hi,
    Open the billing document number generated using t.code VF02 or VF03. Then from the menu bar choose Environment and choose Account determination analysis revenue account. From there you will see where the correction will be made.
    But possible reasons for the error are account 1. account assignment group is not tagged in sales area data in the customer master 2. account assignment group is not tagged in the material master.
    Try also releasing the document by clicking on release to accounting icon (green flag)
    Thanks.
    Rachelle

  • Accounting document not generating for Invoice cancellation

    Hi Gurus
    We have a scenario where two invoices are getting generated from one contract(Order related billing). But when cancelling these two invoice one cancellation document is not generating accounting document.
    The posting period is open on the date of cancellation . The posting status is "Error in Financial Accounting Interface".The customer is not blocked and profit center in cancellation invoice is matching with the contract. Please guide.

    Hi:
         Display billing doc in VF02....and do release to accounting or this can happen due to the fact the invoice was generated in a closed period hence you need to change the invoice date in header VF02 to current month date and then do the reversal.
        Regards
    Edited by: Atif Farooq on Oct 13, 2011 4:47 PM

  • Accounting document should not generate.

    Dear Experts,
    There are certain Z reports in SD and FI in which we have value difference between SD and FI reports. One of the factors for this mismatch is due to adjusting exchange rate difference at FI level. For example, when a late realisation of payment, the difference amount due to exchange rate is directly updated in GL account entries
    Since this doesnu2019t affect SD, we are getting mismatch in the values from SD reports and FI reports.
    In order to eliminate this mismatch after it gets adjusted by FI, we want to issue credit/debit note for the value difference so that it will have an effect in SD reports, but we donu2019t want to affect the entries in GL accounts as it was already impacted directly.
    Solution
    We have crated a separate condition type ZABC and mapped with separate account key. This account key is Not Mapped with any GL account in VKOA. If above said case occurs to our client then he will maintain the price in ZABC condition type. Once the invoice is released the system is not generating accounting document but it say u201CAcc determination erroru201D.
    Note: it is not generating the accounting document but the Posting status of the billing document is B.
    Please suggest is there any other alternative way to address.
    bala

    Hiii
    As per my understanding you want to impact only on SD side where as it is already impacted on FI side due to Exchange rate.
    Now for comparing and reporting purpose you can use Proforma Invoice instead of Commercial invoice so system will not throw any error because no accounting entries will post and you can get report by clubing earlier invoice and proforma invoice.
    Regards
    Shambhu Sarkar

  • Fi Document is not generating in MIGO for multiple account assignment in PO

    Hi,
    I have have created  asset po DG set 111 quanity is 4, i have created 4 different assets and assign quanity 1 to each dg sets in account assignment. While doing GRN system is not generating FI document for this po. if  i am giving one quanity or single account assignment for as 4 then it is generating FI quantity.
    PLease help me out why system is not generating FI document for multiple accont assignment in MIGO.
    Thanks in advance
    KISHORE

    Hi
    There is no option if you are not on EhP4... Do MIRO and see if the FI doc is generated
    Only way is to do MIRO immediately after MIGO.. OR Schedule ERS (Evaluated Receipt Settlement) which runs every hour in the background so that MIRO is posted automatically based on MIGO document.... Basically, you have to do MIRO after MIGO.. Whether you do it manually or through ERS is a matter of choice
    Regards
    Ajay M

  • COPA document not generated though after billing and accounting generations

    I have an issue with one instant.
    For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics.
    COPA documents were created for entries made befor and after this particular one.
    Also we have COPA documents for the product with the same customer and different customers.
    Our system is 'SAP ERP Central Component 5.0'

    Thanks Ajay for the quick response.
    Cost element category is correctly maintained.
    Condition types are mapped.
    COPA is in use for more than 4 years.
    Able to simulate COPA document for the Billing document without errors.
    We do have COPA documents created before and after this particular transaction.
    As you said raising OSS message with SAP.
    Thanks

  • COPA document not generating - very very urgent

    Hi to all,
    I configured COPA and our scenario is Make to order.
    While doing of billin copa document is not generating.
    I went to KE4S to transfer billing documents to copa manually it is saying that " document XXXXXXXXXXXX is not profit related and thus could not be transferred.
    when I double clicked the error message it is saying that might be below reasons the copa document was not generated.
    1. The document type is not profit related, such as inquiry
    2. The sales document shows zero for the quantity
    3.The sales document has been denied
    4.The sales document is locked due to credit reasons
    But in our case above 4 messges are not applicable.
    Please guide me to solve the issue.
    Sateesh Kumar

    You said you didn't find any entries in KEAT... you mean there was nothing at all for this Billing?
    You need to assign those Condition type in KE4I which you wish to analyse in COPA or which require an account assignment. I would analyse my billing to see if more than one condition types are not "cancelling" the transfer to COPA and hence no COPA document. COPA will not post if the net value of the billing is zero.
    Derivation rules need to be maintained only if it has been configured. In all probability, if you are not getting an error for derivation rules, you are in the clear. If the system expects a derivation and doesn't find it, it throws an error.
    Hope this helps.
    Cheers.

  • COPA document is not generating for import sales billing document.

    Hi Gurus,
    At the time of billing i got an error that condition type is not assigned to COPA. I assigned the condition type in KE4I and the entry posted but no COPA document generated.
    Why the COPA document not generated?
    Is there any link between billing type and COPA? if yes, then where we link the same to copa!
    Note:- COPA document is generating for other billing documents.
    What are the criterias for system to determine the generation of COPA documents?
    It is urgent.
    Regards,
    Ramakanta

    Hi ,
    I am really very much appreciate your cooperation for the issue.
    When i try the same through KE4S in test run system is showing the below lines.....
    Number of billing documents read:                        1
    Number of line items to be transferred:                  0
    No. of billing doc. items already transferred:           0
    Number of billing docs with errors:                      0
    Note:- Number of line items to be transfered  0  then there is nothing to transfer to COPA.
    Please suggest.

  • Multiple (Duplicate) COPA docs getting generated for VPRS upon multiple PGI

    Hi
    We have gone live on Jan 1 2009 and we noticed some errors in COPA documents
    In a particular case, referring to Sales Order 30001514, 2 PGI (POst Goods issue was done).. One for Qty 100,000 EA and second for 69920 EA
    Billing document generated COPA docs 1704, 1705, 1706.
    Document 1704 contains entire Qty of 169920 and entire Revenue and Entire Cost (VPRS Price)
    Document 1705 contains no qty, no revenue .. but the VPRS price for 100,000 EA
    Document 1706 contains no qty, no revenue .. but the VPRS price for 69920 EA
    This is not correct.. In COPA report, this will report a wrong picture to Management because the revenue is posted only once, but the cost is posted twice
    Pls provide a solution to stop this error and about how to rectify the wrong postings happened so far
    Regards
    Ajay

    Hi
    I got the solution to it... This was due to wrong settings in SD...
    We are using batch split and batch sub items were actually not relevant for pricing.. But.. in config they were made relevant for pricing
    We could resolve this with note 77414
    Regards
    Ajay

  • Internal credit memo generating COPA document

    Hi,
         We have created one intercompany billing document(IV) and see that there are no COPA
    document generated. But when we did the Internal credit memo(IG) for the same, it is
    generating COPA document.
    When intercompagny invoice(IV) is NOT PASSED THROUGH PA, then intercompany return(IG) also
    SHOULD NEITHER PASS THROUGH PA.
    Also i found that for Billing document type IV, all the value fields are showing are reset
    in KE4W T.code. So is it related to this or anything to do with this.
    Pls suggest
    Regards
    Edited by: R J on May 15, 2009 11:35 AM

    Anybody update on this or any suggestion.

Maybe you are looking for