COPA Report current period and previous period issue

Hi Gurus,
I have defined COPA report (Tcode KE94) based on line items. Now I want all values to be displayed based on an entry parameter in terms of period. That is to say that If I give input values of "010.2013" as a period entry , my report should display the values for the the period specified i.e. 010.2013 in the first column and in second column values for the period 009.2013 should be displayed and in the third column values for the period 001.2013 till 010.2013 should be displayed cumulatively.
For this, I choosed the character "period/year" in General data selection tab, clicked "Variable on/off" tab and gave values "From" as well as "To" for the Global Variable "OFP" which is Curr.fisc.per./year.
For the 1st column (1st column which is suppose to display the values according to selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From" as well as "To" for the Global Variable "OFP" which is Curr.fisc.per./year.
For the 2nd column (2nd column which is suppose to display the values for the immediately preceeding period of the selection parameter), along with the character "company code" , I choosed the character "period" and clicked "Variable on/off" tab and gave value "From" as well as "To" for the Global Variable "OFP" which is Curr.fisc.per./year. While doing so, I selected operator as "-" and choosed offset as 1.
For the 3rd column (3rd column which is suppose to display the cumulative values from the beginning of the fiscal year till the period mentioned in the selection parameter), along with the character "company code" , I choosed the character "period" and selected 001 in "From" and 016 in "To" tab.
Company Code selected in all the three columns is same and I have selected actual values i.e. 0 for "plan/actual indicator" tab.
When I run the report through Tcode KE30 , I give values as "010.2013" for the From and To selection tabs. System shows the values as per the selection parameter in the 1st column which is correct but display values same as per coulmn 1st in the 3rd column which is wrong because it should be cumulative. 2nd column is blank.
How to display the values for the immediately preceeding period and for cumulative period?
Regards,
makrand

Dear Ajay,
Thanks for the reply. Here are the screen shots.
For the general data selection tab
For the first column "current month" i.e. for the month
For the second column "Last Months"
For the third column "Cumulative" i.e. year to date
Following is the result of KE30
Values for the period 010.2013
You can see that values in the report for the period 011.2013 contains value for the previous period which is 59090.21
This value is matching when the report is run for the period 010.2013.
But in both the reports,the figures for Current month and YTD (year to date) are same.
Please let me know what setting is required in the current month column.
Regards,
makrand

Similar Messages

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

Balance sheet required for current quarter and previous quarter

Hi Guys,
I am using 0FIGL_C10 cube for balance sheet report,i need to create balances for current quarter and previous quarter.
user will enter the fisper, based on fisper it has to show the current quarter and previous quarter balance.
how to calculate the quarter using fisper.

you can use offset with ranges.
or
just offset of -1 , -2 & -3 seperately in 3 selections and add it in one column in formula (this will give u current quarter).
similarly offset of -4, -5 , -6 will give u previous quarter result.
total of 6 selection and 2 formulas. hide all selections from display.

Parameter for current year and previous year

Hi all,
I currently have 2 reports where the query is the same except in the where clause I have it filtered to current year and previous year based on the List_Date. I would like to make this one report with a parameter of Current or Previous year.
Would I create 2 more datasets one for current and another for previous? I would think there is a easier way. Any help or direction would be great.

If you define a parameter in SSRS, you can use it's value in your query. Just make sure the parameter name, and CASE (SSRS is case sensitive when it comes to parameters) are the same in SSRS and your query. There's a parameter tab on the dataset properties.
It SHOULD auto fill, but it never hurts to check, just in case.
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
Yes it did auto fill the parameter tab in the dataset and I get a parameter to enter the year when I preview the report. Still a little confused on how I do current or previous year. Are the next steps what I need to do?
@yearParam parameter:
1) Create Available or Default values
2) Current and Previous year as label
3) For Value do I need to use a expression for current year =Year(now()) and previous Year?
4) Add a filter on the tablix for list_date?

Display Current Quarter and Previous Quarter???

Hi Gurus,
I Had a requirement to display only the current Quarter and previous quarter in the report level using single quarter column.
and my quarter value type is Q1 2013.
Please anyone help me out on this asap/
Thanks.

Hi,
Using time serious function you can acheive this requirement.
http://obieetutorialguide.blogspot.in/2012/02/modeling-time-series-function-in-obiee.html
OBIEE 11g Time Series Function
or,
Using presentation variable you can achieve this.
Re: OBIEE 10g LY YTD returns YTD for past years
The above thread for year you can change to qtr.
Hope this help's
Thanks,
Satya

BEx - Display current year and previous year by day on the same row

Hello experts, need some help/suggestions on how I can accomplish the following please.
We have a requirement to show MTD revenue by day for the current year and previous year. The desired result will have the following columns
Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
11/01/2009       |      15,131,005                    |        15,138,668
11/02/2009         |    15,055,345    |                        15,523,762
However, the result is showing up as follows:
Calendar Day   |     Current MTD Revenue     |     Prev MTD Revenue
11/01/2008       | |                                                   15,138,668
11/02/2008       | |                                                   15,523,762
11/01/2009       |      15,131,005 |
11/02/2009       |      15,055,345 |
The number of rows for Calendar Day varies depending on the date the user selects. We only want to display the days for the current year with the Previous Year Column on the same row.
Can someone please let me know how I can get the results to display on one line for each day?
Thanks,
David

I have the same issue on my end, and am interested in responses. I searched the forum and found this suggestion in another post; not sure if this solution will help, but it looks like it might. This was a response from poster RadhaN:
RadhaN
Posts: 390
Registered: 8/27/09
Forum Points: 876
   Re: a simple query to show sales versus last year on daily basis/
Posted: Sep 21, 2009 9:53 AM    in response to: Shlomi Weiss           Reply
HI Shlomi
Create a virtual characteristic in your infoprovider that can calculate the day from calendar Day. In ZXRSRZZZ while adding code for this virtual characteristic use the function module DATE_COMPUTE_DAY to compute the day for every calendar day.
For calculating Sales Current year, create a restricted ky figure with Sales as the key figure. Add 0CalDay to this RKF and create a variable for this infoobject(Eg: ZCURYEAR) that will receive input from the user for the range of dates eg: 08/16/2009 - 08/22/2009.
For Sales Prior year, create another restricted key figure with Sales. Add 0CalDay to this RKF and add a customer exit variable. In the Customer exit code use the ZCURYEAR variable and offset it to prior year in both the upper and lower limits. This should work.
I hope this helps.
Thanks.

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

Difference between current row and previous row in a table

Hi All,
I am having a problem with the query. Can some of please help me?
I need to get difference between current row and previous row in a table. I have a table, which have data like bellow.
TABLEX
================
Name Date Items
AAA 01-SEP-09 100
BBB 02-SEP-09 101
CCC 03-SEP-09 200
DDD 04-SEP-09 200
EEE 05-SEP-09 400
Now I need to get output like bellow...
Name Date Items Diff-Items
AAA 01-SEP-09 100 0
BBB 02-SEP-09 101 1
CCC 03-SEP-09 200 99
DDD 04-SEP-09 200 0
EEE 05-SEP-09 400 200
Can some one help me to write a query to get above results?
Please let me know if you need more information.
Thanks a lot in advance.
We are using Oracle10G(10.2.0.1.0).
Thanks
Asif

     , nvl (items - lag (items) over (order by dt), 0)like in
SQL> with test as
2 (
3 select 'AAA' name, to_date('01-SEP-09', 'dd-MON-rr') dt, 100 items from dual union all
4 select 'BBB' name, to_date('02-SEP-09', 'dd-MON-rr') dt, 101 items from dual union all
5 select 'CCC' name, to_date('03-SEP-09', 'dd-MON-rr') dt, 200 items from dual union all
6 select 'DDD' name, to_date('04-SEP-09', 'dd-MON-rr') dt, 200 items from dual union all
7 select 'EEE' name, to_date('05-SEP-09', 'dd-MON-rr') dt, 400 items from dual
8 )
9 select name
10       , dt
11       , items
12       , nvl (items - lag (items) over (order by dt), 0)
13    from test
14 ;
NAM DT             ITEMS NVL(ITEMS-LAG(ITEMS)OVER(ORDERBYDT),0)
AAA 01-SEP-09        100                                      0
BBB 02-SEP-09        101                                      1
CCC 03-SEP-09        200                                     99
DDD 04-SEP-09        200                                      0
EEE 05-SEP-09        400                                    200
SQL>

Next and previous button issue with Prettyphoto in filtered gallery

Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolf

bump PLEASE HELP

Displaying current year and previous year's data.

hi all,
we have fields like doc.no, company code, costcenter, posting date, year etc... in a query.
we are using this query to display data in VC,
how can i display the current year and previous year's data in two different tables using the available fields.
any help will be highly appreciated.
thanks,
Rk

Hi Rk,
You can achieve your requirement using 'Filter' operator. Drag one 'Filter' operator into visual composer story board and drag the output into filter and add condition(Check year=2008) and drag one table from filter. For another table use another filter and change the condition.
Hope it helps...
Regards
Basheer

Current year and previous year

Hi All Grus,
i have a one requirement user will give input 30.04.2009 . the output should show last ten days including user entered date like 21.04.2009 to 30.04.2009 for current year and previous year
this current year and previous should show column wise in row wise i need year like given below
user input: 30.04.2009
row            column
21.04.09 22..04.09. 23..04.09 .............................................................. 30.04.2009
2009       100          200            300         ...............................................................     500
2008        200          300          600          .................................................................    1000
Edited by: kek.uthayakumar on Aug 4, 2009 7:57 AM
Edited by: kek.uthayakumar on Aug 4, 2009 7:58 AM

Hi
You need to have customer exit variable on this calday and write code to obtain your logic. Search in SDN for sample codes:
enter information required in search forum SAP Business Explorer (SAP BEx)
Regards
Ravi

Time Dimension _ Report on Current month and previous year.TOTAL

Hi,
My Time dimension is as under .
July2013, Aug2013 ,......Jan2014,,,. June2014 = 2014.TOTAL
My requirement is to report based on context view along with previous period total (.TOTAL) values.
For example : If i am using CV as : 2013.JUL my report should show 2013.JUL & 2013.TOTAL
If i am using CV as : 2014.JUN my report should show 2014.JUN & 2013.TOTAL
Can anyone provide some direction to build the above scenario
Regards
Krishna

Hi,
do you have the property YEAR in your time dimension filled out? If so, you could use EPMDIMENSIONOVERRIDE function together with an Excel cell.
Let me build an example:
Assuming your report has two columns, one for the current month and one for the total year. I would split this into two, one report per month, i.e. column. The first report will show the current period, the second the total. Somewhere in the header of your sheet use:
EPMDimensionOverride("001";"TIME";EPMMemberProperty(;EPMContextMember(;"TIME");"YEAR")&".TOTAL")
001 is the default ID of the second report.
BR,
Arnold

Financial Reporting - Current Period Variable

Anybody know a quick way to get the Current Period Number (eg June = 6 ) for use in a formula? Thanks.

You'll need to restart FR studio, after you have created the substitution variables. As the studio only performs one read of the sub var database on startup.
It also won't show up unless you assign a member to it.
Hope this helps.
Iain

Key figure comparision between current year and previous year

Hello collegues,
I have created a WEB Intelligence report with key figure ROI (return on investment which is calculated out of three other key figures (capital, revenue and costs). I would now like to calculate the percentage period (year) differences between key figure ROI - between current year (month) and previous year (month).
Do I have to add coding within a key figure formula within WEBI Rich Tech client or within universe builder.
The key figures were extracted from SAP BW and added to a universe which is basis for WEBI rich tech client report.
thanks and regards,
Christian

Hi Stratos,
so I see - i have to use the variable Editor and then define a measure and add coding in the formula field. Do you have an e-mail address ín order to send you the report and explain in more detail what I would like to see - here it is not possible to upload a report...
thanks and regards,
Christian

Show current month and previous month measures

Experts,
My period names are stored like this in the Period Dim table 'Jan 2012'.....'Aug 2012', ... 'Dec 2012' etc..
To my request, i will pass only the current period value via. a drop down prompt, say 'Feb 2013' and it has to apply filter like this Period."Period name" in ('Feb 2013', 'Jan 2013').
I cannot use TIMESTAMPADD(SQL_TSI_MONTH, -1, Period."period name") as my period name is a char. Can someone suggest any idea?
Version : 10.1.3.4
Regards,
Sarvan

Hi,
This can be achived,but little bit tedious process...
Create an intermediate report with three columns.
first column : Monthcolumn,which you are using in prompt.
Second column :This column is for selected month
Try to convert Jan 2012 to 201201,Feb 2012 to 201202...This can be achieved by writing a case statement like below
cast((Case when substring(column from 1 for 3)='Jan' then 01...........)||substring(column from 5 for 4) as int)
Third column:Prior month
cast((Case when substring(column from 1 for 3)='Jan' then 01...........)||substring(column from 5 for 4) as int)-1
Now add the same column formula to the main report and hide it(let's say column name will be "HIDED")
cast((Case when substring(column from 1 for 3)='Jan' then 01...........)||substring(column from 5 for 4) as int)
Now you can apply filter based on another request on the hided column.
HIDED<=Second column in intermediate report.
HIDED>=Third column in intermediate report.
Now you will get the desired reults in your report.
Hope this helps.
Thanks,
Pramod.

COPA Report current period and previous period issue

Similar Messages

Maybe you are looking for