SmartView - Manage Process - 11.1.2

Hi,
I set up my process workflow hierarchy. i have e.g. user 'bvo' as owner and user 'jhb' as reviewer. In planning as user bvo i normally promte my entity part to bvo and then he can take ownership.
However in smartview this is not possible as i get error message: You cannot change planning status unit.
Thank you very much
lubos

Hi,
A couple of things...
It would be easier to help you diagnose this if you post your code between the {code} {code} tags I'll be happy to take a look, but without code i'd be guessing.
There is a SmartView forum where you may have a better chance at getting help with this sort of question: Smart View
You have 28 of 30 questions unresolved. Please consider acknowledging the posts that are correct or helpful so that others will know what solved your problem: http://forums.oracle.com/forums/ann.jspa?annID=1184
Regards,
Robb Salzmann

Similar Messages

  • Versions now available in the Manage Process Option in Planning

    Hi All,
    I am using Hyperion Planning 11.1.1.1.0 and have a planning application.
    While creating the app i selected 12 months as my year distribution.
    I have a version "V1" standard target .. and others "V2" "V3" as Standard Bottom up.
    Now when i try to start the budget cycle by going to File --> Workflow -->Manage Process on the Version Selection I can see V2 and V3 which are standard bottom up but dont see V1 which is Standard Target.
    Is there a way i can get it on the versions drop down..
    If somebody could please suggest ..
    Looking forward to soem advice.
    Alicia

    Target version enables data entry even at the parent level which you would typically do to set targets (..I assume the numbers would already have been approved) and the users will plan their data at the bottom levels accordingly.

  • Credit Management Process based on Terms of Payment.

    Hi All,
    My Client wants to use SAP Credit Managment Process. The SAP is currently being used but without Credit Management. As per my initial discussion I have enclosed the requirments below. Your Kind Help will be highly appreciated.
    1.     The Process has to be implemented in a 2 Step Process.
    2.     The Initial Requirement is based on Terms of Payment. If the Number of Days is Overdue for the Invoice for a particular Customer, the system should issue a warning message (in the Form of Mail or any other way) which can be shown as evidence to the Customer for collection of Payment so that further Sales Transactions can take place.
    (Is there the standard Process in Credit Management based on Terms of Payment)
    3.     In the next step Value Base Credit Check has to be implemented. The Value will be set for a particular Customer in Credit Master. When the Sales Order is raised and if the Credit Limit is exceeded the System should issue the warning message. Based on the Warning Message Issued an email should triggered to the particular person in Finance that the Credit Limit for a particular person has been exceeded and Credit Limit needs to be increased.
    Thanks & Regards,
    Sam.

    Dear Mr F Farooq,
    1. The Process has to be implemented in a 2 Step Process.
    Do the following configurations for credit management :
    Refer the following link.
    http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditManagementConfigaration
    2. The Initial Requirement is based on Terms of Payment. If the Number of Days is Overdue for the Invoice for a particular Customer, the system should issue a warning message (in the Form of Mail or any other way) which can be shown as evidence to the Customer for collection of Payment so that further Sales Transactions can take place.
    (Is there the standard Process in Credit Management based on Terms of Payment)
    Now for this requirement, since different billing documents for the same customer  can have different payment terms (whcih means different billing will be due on different date) , please make the following changes in OVA8
    Check for 'oldest open item'
    Now follow my reply in the below thread.
    Sales order to be blocked based on customer payment terms and credit limit
    You can use WORKFLOW to trigger mail when such a message is triggered in the sales order , due to credit check.
    Ask your ABAP-er for details on workflow.
    3. In the next step Value Base Credit Check has to be implemented. The Value will be set for a particular Customer in Credit Master. When the Sales Order is raised and if the Credit Limit is exceeded the System should issue the warning message. Based on the Warning Message Issued an email should triggered to the particular person in Finance that the Credit Limit for a particular person has been exceeded and Credit Limit needs to be increased.
    Just configure according to the thread given for 1st POINT.
    CHECK FOR DYNAMIC and set reaction as 'C' and check STATUS /BLOCK.
    Maintain the credit limit in the FD32.
    Now when the sales order value exceeds the credit limit , a message will be triggered.
    Use the concept of WORKFLOW to create mail based on this message .
    When the user gets mail, he can maintain the new credit limit in FD32 and release the document for delivery/billing in VKM3.
    Revert back if there is any issues.
    Thanks & Regards,
    Hegal K Charles
    Edited by: Hegal . K . Charles on Aug 7, 2011 1:19 AM

  • Firefox runs in background (appear in Task Manager Processes Tab) only and does not appear on Desktop

    I have been using Firefox on my Desktop PC with Windows XP for a long time. However, today possibly due to some virus (I attached an infected flash drive to my PC) a suspicious change in homepage (www.delta-homes.com) of my firefox occurred. Simultaneously an error message of "WinZip" appeared on screen. I figured that there must be some software in "C:\Program Files\" which is also causing problem to my firefox. I opened Program Files and removed that folder named WinZip. (Tried to uninstall it but it won't happen so I had to use "Unlocker" to kill processes this folder was associated with and then deleted the folder.)
    From that point onward, My FireFox started to behave weird. Whenever I click on Firefox icon or access firefox.exe from any source (start menu, quick launch, program files, Run Command), it starts but appears only in "Task Manager Processes Tab". In that Processes Tab, firefox.exe is continuously using 50% of CPU but it does not appear on Desktop at all.
    To go a step further, I uninstalled firefox and tried to re-download from Firefox official website but the download fails in the start saying "Download is interrupted". (See attached Image). So I downloaded a previous version of Firefox (v 34.0) from www.filehippo.com and installed it but the same problem is happening with this version too.
    I am confused and surprised what might be causing this problem. Everything else on PC running fine. Kindly help me restore my Firefox so that I may not lose any precious Bookmarks, Settings and other Data. thanks

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Integration of new BPM (NWDS EHP1) and Solution Manager process graphics

    Hi Experts,
    we are trying to use Solution Manager for our client's process documentation. Now, Solution Manager generates a graphic which unfortunately is almost unusable (no lanes, no transaction link, just visio-like graphic). Even the old ASAP 4.6C graphic tool was better and more interactive.
    On the other hand the new BPM in NW Developer Studio EHP1 Composition Environment seems to provide a perfect graphical tool for process modeling and documentation.
    Does anybody know if there is a (future?) possibility to integrate these two tools?
    As an alternative, does anybody have an idea how to get better Solution Manager process graphics?
    Michael Meissner

    I also digged a little into this topic since I was wondering about the different modeling techniques SAP currently provides and how they will be integrated in the future.
    [This|http://www.feedingthesapecosystem.com/2009/05/sapphire-09-part-ii-high-stakes-of.html] great blog entry about NW BPM also includes some comments about the future vision of integration between NW BPM and SolMan. It looks like in NW BPM 7.2 (planned for end of the year) there will be a "read-only" integration with SolMan processes while in the future there will be a bidirectional integration which means that BPM can import SolMan processes, enhance them and again export the models to SolMan. This is a great step further to the Common Process Layer SAP is referring in the [BPM Roadmap document|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/003cf0a1-e8fa-2a10-7db5-ba245a663d9f&overridelayout=true].
    Cheers,
    Mane

  • BPM and Change Management Process

    Hi,
    We have a requirement to automate the change management process. Typical functionality needed is - input the change required, assign priority, organise risk assessment, change approvals, change implementation, send automatic emails to managers etc.
    Is BPM a best fit to this kind of Change Management Process?
    Thanks
    Srikanth

    Hi Srikanth,
    It's a good question and I hope this helps.
    My short answer is that "it depends...".
    Yes, an Oracle BPM process will let your users enter the change required, assign priority, define the change approvals, and send automatically send emails to managers.
    Not saying that this is the case here, but sometimes people confuse an application with what BPM does with a process.  Ask yourself if your candidate process for BPM has one or more of these characteristics:
    Workflow - are there multiple people involved in the editing and approvals over some period of time?
    Documentation - as work flows through the process, will you need to gather requirements / documents and associate these with the instance?
    Seamless integration - are there systems and or databases involved that you need to integrate into the process?
    Efficiency - do you want to ensure that your process continues to flow and escalates when a work item sits too long in someone's queue?
    Governance - do you need to have an audit trail of the various people who were involved as a work item instance (a change approval in your case) flowed through the process?
    Compliance - do you need to have the change management instances go through a process in a consistent and well documented manner?
    Visibility - do you need to gather key performance indicators as instances flow through the process and do managers need to track these in business activity monitoring reports?
    Hope this helps,
    Dan

  • How to close Acrobat.exe from the task manager processes through plug-in?

    I have a plug-in in which we have a functionality of defining some keys and they are displayed as annotations on the PDF. Now, if the user defines such a key, an annot (i.e.a rectangular box) gets displayed on the PDF and if the user does not click custom menu say 'Close Key' then annot remains visible on the PDF.
    My problem is if in such a case i.e. the user has defined a key & if the user does not hit 'Close Key' and instead closes Acrobat by directly hitting close (i.e. [X] button at top right corner), then Acrobat exits; but the Acrobat.exe remains running in the Processes.
    If the user tries to open the same PDF again then a message pops up saying 'Cannot open file for viewing as its already in use...'.
    Note that any other PDF gets opened fine.
    Could somebody help me in giving me any ideas/suggestions on this? I want to exit the acrobat.exe from the processes so that the same PDF could get opened. As described above, the cause is the key (annot) was opened and user abrubtly exited Acrobat. Is there a way, that we could catch this Acrobat exit event in the plug-in? That way, I'd be able to clear off the annot (key) and then close acrobat.
    Please let me know asap.

    Hey, tnx for ur response! But, the issue is reproducible on Acrobat 7.0 Professional.
    I do have the 'WillClose' event registered in my plug-in. Below is the event that is wired up with 'WillClose' event:-
    static 
    ACCB1 void ACCB2 NotifyAVWillClose (AVDoc doc, void *clientData){
    UNREFERENCED_PARAMETER(clientData);
    UNREFERENCED_PARAMETER(doc);
    CloseTemplate(TRUE);
    The 'CloseTemplate' method performs the closing of the annotation, clearing of objects and deleting the PDFfile class pointer.
    And this all works fine with Acrobat.exe getting closed from the task manager processes in acrobat versions 8 & 9. However, in Acrobat 7.0, the process remains in the Task Manager.
    Could you suggest any ideas on what else needs to be implemented to end the process in Acrobat 7?
    Thanks!

  • Workflow for Predefined Performance Management Process

    Hi All,
    We are in process of implementing Predefined Performance Management to our client, as I know we donu2019t have workflow for predefined performance management, but I saw below thread:
    Performance Management Process - Workflow between participants
    Please give me more clarification about configuration of Workflow for PMP, we need e-mail notifications only when ever manager is going to do some status change like approve planning phase, reject planning phase etc.
    We are expecting these notifications not through portal only employees e-mail account, can you tell me where the location of the configuration is?
    Thanks in advance.
    -Abhi

    Hi,
    The pre-defined is not ment for changing by anyone. The template is generated and the settings are as is. You would need to go to the phap_catalog to change the template (but that option is disabled for PMP templates). Theoritically you would need to change the status flow tab and select the correct workflow there. The information workflow is standard delivered for use in the flexible one.
    So, yes you probably are able with tricks to get it working in PMP but it is not supported by SAP.
    Regards and Groetjes,
    Maurice Hagen

  • Flexible appraisal processes & predefined Performance Management process.

    Good Night.
    What is the diference between Flexible appraisal processes & predefined Performance Management process and in what case i have that use it?
    Kind Regards-

    Hi Juan,
    Flexible Appraisal Porcess- As the name suggest you have the flexibilty to design your apparisal templates using the functionalities provided by SAP.
    For eample: Using transaction PHAP_Catalog_PA or OOAM, you can design your apparsail template.
    Predefined Appraisal Template: Again as the name suggest, SAP has pre-designed the strucure for defining the appraisal template. After clicking on the tab for Predefined appraisal process in IMG node, you will follow the number of screens in sequece.
    Excellent material is available on SAP Servicemarketplace for Performance Appraisal in EHP4. Please check the link below:
    https://websmp109.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000687484&
    Thanks!
    Best Regards,
    Chetan

  • Predefined Performance Management Process and Infotype 7409 'Performance'

    Hi,
    I hope, that anyone can answer my question.
    I have configured a predefined Performance Management Process in SAP 6.0 EHP4 and finished the process with an overall assessment of the performance of the employees. However, no data has been written into Infotyp 7409 "Performance". Shouldn't the data of such an assessment be written into it?
    The SAP documentation for IT7409 says the following:
    "An employee's manager can use a form to assess the performance of the employee. In a talent review meeting, the participants can confirm this performance assessment or reclassify the employee regarding his or her performance.
    For each performance assessment that is stored in the talent profile or made in the talent review meeting, the system creates a record for the Performance infotype in the background and stores the ID of the employee's central person in the record (object type CP)."
    (http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/2bbb6a72aa4812b834a5ac777f630b/frameset.htm)
    However, to be able to add a talent to a talent review meeting, the talent already needs to have an entry in IT7409.
    Hence my question: How does the IT7409 get filled?
    Kind regards
    Daniel

    My question seems to have been a problem in fact and seems to have been solved with OSS note 1338701 just yesterday.
    Kind regards
    Daniel

  • Error under "manage process"

    Hello,
    when i try to see all instances of a bpm process under "manage process" in the administration workbench i get following error message:
    Error occured while processing the request. Log entries are created with ID: (No log entries created due to the log level set)
    Error occured while processing the request. Log entries are created with ID: 0015F24B71A20564000000070000151C
    This is the log entrie
    Message:     class com.sap.glx.text.TextStoreException
    Date:     2009-10-20
    Time:     15:48:11:218
    Category:     com.sap.glx.nwa.pm.SAP_ITSAMGalaxyProcessManagerImpl
    Location:     com.sap.glx.nwa.pm.SAP_ITSAMGalaxyProcessManagerImpl
    Application:     sap.com/tclmitsamuimainframe~wd
    Thread:     Thread[HTTP Worker [@31641945],5,Dedicated_Application_Thread]
    Data Source:     j2ee\cluster\server0\log\defaultTrace_00.trc
    Arguments:     
    DSR Transaction:     3037c0b0bd7f11de953b0015f24b71a2
    Message Code:     
    Session:     1314
    Transaction:     
    User:     admin
    Time Zone:     +0200
    CSN Component:     BC-BMT-BPM-SRV
    DC Component:     sap.com/com.sap.glx.nwa.core.app
    Correlation ID:     3551350000000004
    DSR Root Context ID:     28C92260BD7F11DEA5200015F24B71A2
    DSR Connection:     3037c0b0bd7f11de953b0015f24b71a2
    DSR Counter:     0
    Log ID:     0015F24B71A20564000000070000151C
    Host:     MSGP558P
    System:     CE1
    Instance:     J00
    Node:     server0
    Edited by: tw18399 on Oct 20, 2009 3:55 PM

    Sorry, but there is no possibilty to drill down in this entry. But before this error message , there a view other errors:
    Exception while executing the statement >>STMT_SELECT_CACHED_TEXTS<<.
    And:
    selectAsList(), CommandProcessorException, 
    [EXCEPTION]
    Exception while executing the statement >>STMT_SELECT_CACHED_TEXTS<<.
    and:
    executeCommand(), exception occured at execution, 
    [EXCEPTION]
    and:
    Additional error in after execution of command processor!
    [EXCEPTION]
    and:
    SQL error occurred on connection MSGP558P.msg.de:CE1:SAPCE1DB: code=-1,104, state="I1104", message="[-1104] (at 4096): Too complicated SQL statement (KB-stack overflow)";
    SQL statement is "SELECT "CONTAINER_ID","TEXT_ID","LOCALE","TIMEZONE","SHORTTEXT","LONGTEXT" FROM "GLX_RRH_TEXT_CACHE" WHERE "LOCALE"...
    They all occured within a second.

  • General Discussion - Best practice to manage Process order

    Hi Experts,
    Which is the best practice to manage process orders ?
    1. Quantity Change - I can make quantity adjustment in R3 and APO.
    2. Source Change - I can make a version change from order header . Also i can make a source change in APO by selecting a different PPM. Which is the best option.
    3. Re Read Master Data - Best practice to read master data is from R3 or APO ?
    I feel for all the above scenarios process ordes should always managed in R3. But still wondering why we have the same flexibility in APO too ?
    Can

    Hello,
    we are just migrating from 4.6c to ECC 6.0 and I have a couple of workflows to adopt.
    For background steps I defined in the corresponding BOR methods an exception to be fired when no result is available (e.g. no mail address available). Normally, I defined them as temporary errors.
    I activated in the WI outcome section the line for this exception and so the workflow processed this branch when the exception appeared. It worked fine.
    Now, in ECC 6.0, the same workflow get stuck in the WI. The exception is fired (I can see it in the log as "Error message"), but the WI is still in status "in process". It doesn't continue with the error outcome branch.
    Is this a new logic in ECC 6.0? Do you have any idea what to do? I used this logic some dozent times in different methods and workflows and it gives me a headache if I have to change everything ...
    Thank you!
    Best regards,
    Thomas

  • Change Management Process

    Is it possible within the Change Management process to get the status field to pick up Approved?
    At the moment it seems to realise when its been completed or declined/failed but other then that always seems to sit as In Progress.
    I have added the approved to the list but it doesnt seem to have married the two up?

    Not near a console right now so this may not be entirely accurate.
    You must add a custom status (ex. Approved) - read first part of
    this - and create a workflow that triggers on a review activity being completed. That workflow must then update the status of the CR. Workflows out-of-the-box can only apply changes to properties within itself, ie. on the review activity. I think the easiest
    is to use orchestrator and create a runbook (disregarding best practice) with a monitor object activity -> get related object (CR) -> update object (CR).
    Another approach is to create a view based on a type projection that shows the status of the review activity. You will have to do some custom xml editation to achive this. You can either try yourself (i wrote something
    here), or use a tool for it:
    advanced view editor.
    http://codebeaver.blogspot.dk/

  • Manager Process for Multiple DB's

    Hi Experts,
      I am trying to understand goldengate for my setup in LAB.
    Currently I have the below setup and need some clarification(s).
    Source & Target -  2 node RAC(11.2.0.3); RHEL 6
    GG Version : 12.1.2.0
    On Source i have 3 databases and of them 2 targets are corresponded to same source but the third target is different
    so do we need to have same manager , that will take care of othere process for EACH db or we need to have seperate MGR for each DB.
    If i understood clearly having a dedicate mgr process for EACH DB will be much better making more sense. ( correct me if i am wrong) but now comes the question with single binary setup how can we maintain multiple manager process
    If only 1 mgr is allowed how do we know which process is responsible for which database.
    Appreciate your thoughts. ( sorry if i was wrong . . . just in learner mode)

    Hi,
    You can have a single manager configured with multiple extract/replicat processes which connects to its respective databases through sql net connection.
    Manager doesnot need to connect to any of the databases except for doing the maintenance tasks at the os level to delete the trail files, managing the processes to start automatically when it is started, etc.
    Hope this helps!
    Thanks
    Vivek-Oracle

  • Sir my firefox is mot starting.. whin i check in task manager processes it is running in background....please tell me what i do .......

    when i double click on icon it will not open......
    when i check in task manager processes it will be seen .....
    what i do..... i have many passwords stored in firefox..... what i do please tell me ....

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

Maybe you are looking for