Copy and paste motion only ?

hiya, hope you can help
I have animated a slideshow effect where one frame moves out teh way and another moves into frame
i am happy with it and now want to repeat it with all teh other images in the slideshow
the problem is, when i copy the keyframes (with a tween) on the first image that I did and try and paste them onto the 2nd image in my series, it actualy charges the image as well ! So that the second image becomes the firts image on the keyframes.
Is there a way just to copy the opacity and motion animation ONLY ? My guess is there must be because to animate each picture by hand with a custom ease in & out curve would take forvever
hope you can help
Regards
Rich

with cs4 you can save your tween as a preset and apply it to any object you like. here's a lee brimelow tutorial:
http://www.gotoandlearn.com/play?id=88
(and i'm not sure what you're describing about a button frame. can you post a link to a screenshot? (if you try to attach one, check to make sure it doesn't get queued.)

Similar Messages

Copy and Pasting Motion? Please help!

Im quite new to flash. It's really, really annoying me at the minute.
My situation: I've got 7 frames of animated motion that is exactly the way i want it. I want these 7 frames of motion to loop so it gets to around 300 frames. So rather than doing every frame manually (which takes ages) i went to copy and paste motion.
So i highlight my 7 frames and click 'copy motion'. Then I try pasting them and i get the error mesage (in the attached picture) that nothing is selected. But i've clicked on the 8th frame, the place were i want the motion to begin, but still it says this error message.
So then i insert a new frame on the 8th frame space and paste the motion over the top of the 8th frame, but it misses the first 2 frames of animation (therefore messing eveything up) out and the motion is also wrong on top of that!
Im desperate here, all i want to do is something simple and i dont know how.

Yeah i want to animate my keyframes.
I know i can copy and past the keyframes, but thats not what i want because if i do that my character does not progress forward (or to the right of the screen in this instance). I want to copy and paste the motion so he goes forward (to the right of the screen).
I have the character and i want him to walk from left to right across the screen whilst moving his, arms, legs and head etc (the motion) in a certain way.
Also i had already converted my layers to symbols. I will attach another picture to show you my character.

Copy and paste formats only

I have just downloaded IWork to evaluate and am stumped at the first hurdle. I just want to copy a cells format (not its contents)and paste it into another cell (format painter in Excel). Can anyone help?

What we have is descripted in the PDF User Guide in page 79 (in the English version)
+*Copying and Pasting Table Styles*+
+You can change a table’s appearance by copying and pasting table and table cell styles.+
+Here are ways to copy and paste table styles:+
+• To copy a cell’s style, select the cell and choose Format > Copy Style.+
+• To apply a copied cell style to other cells, select the cells and choose Format > Paste+
Style.
+• To paste a copied table using the spreadsheet’s default table style, choose Edit > Paste and Match Style.+
You may also install the buttons "Copy Style" and "Paste Style" in the toolbar.
As I doesn't allow µSoft products to enter my home, I don't know if this duplicate "format painter".
Yvan KOENIG (from FRANCE vendredi 7 novembre 2008 15:04:34)

Using Clipmate to copy and paste between projects

Thanks to Robert Johnston for the inspiration (and perspiration) for this method for copying and pasting between PE projects. One residual side effect of the method is that the audio and video of the copied clips will be unlinked. The renaming folders business is a workaround to avoid the silent audio problem after a project has been saved and reloaded.
1. Rename the folders of all audio files (including AVI files) used in the project to be copied.
2. Start PE and load in the project to be copied.
3. When asked, tell PE where the missing files are. (Check the box marked "Display Only Exact Name Matches".) Press Select.
4. Highlight parts (or all) of the project to be copied, in the timeline.
5. Copy the highlighted parts.
6. Copy into Clipmate:
6.1 Edit > Capture Special
6.2 Check both items in the list
6.3 OK
7. Close PE without saving.
8. Rename the folders of the audio files back again.
9. Open destination project in PE.
10. Re-select the copied info in Clipmate (closing the project in PE caused the clipboard to be cleared):
10.1 Select anything in the Clipmate list except the wanted item.
10.2 Select the wanted item (selecting an item loads it onto the clipboard).
11. Position the CTI to the wanted insertion point.
12. Do Edit > Paste Insert.
13. The pasted items will be highlighted in Media Panel. While still highlighted, select the Media Panel and do: Edit > Locate Media.
14. Tell PE where the files are.
15. Save project.

When combining projects, it is best to do your pruning of unwanted clips and other resources BEFORE you combine them, because once the Media Panel gets heavily loaded, PE is liable to crash.
Deleting the unused resources in Media Panel is quite easy in PE3 and PE4. Simply click on the "used" column heading, and the resources will be sorted into two groups of used and unused. Just click on the resource at one end of the unused range and shift click on the resource at the other end to select the whole range, then press delete. (Note that shift works normally in this panel, unlike in the timeline!) However, it is not strictly necessary to delete unused resources before copying and pasting because only resources selected on the timeline will be copied. PE will load and save a lot quicker if unwanted resources are deleted.
My feeling is that PE4 is somewhat more unstable than PE3, but I haven't done a proper direct comparison. For some reason after a crash the autosave often doesn't seem to have done its job properly, even though I set it to save every 10 mins. So make use of the Save button Adobe gave back to us in PE4 and save often, particularly before you use the titler or fiddle with the Media Panel.

Trying to copy and paste objects in keynote 6 I only get a hyperlink when pasting. Anyone else having the same problem? is there anywhere I can change it so that the copied object is pasted directly into the new slide?

Hi
I am trying to copy one object from one lside to another slide in the same presentation. The only thing I get when pasting is a hyperink. Does anyone know how I can turn this off so that the image or the object is pasted as copied to the new slide?
Thanks a lot

there are some unexpected issues when copy and pasting.
As a workaround, use duplicate slide to get the same object in another slide, (select the slide in navigator and command D or right click > duplicate)

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

I am trying to copy and paste a story from a blog. I can only view the first page on the Pages app. How do I see the rest of the pages?

Thank you. That helped in the first step. I was able to copy text onto multiple pages.
Now I can't get the pictures to copy. How do I get my pictures to copy?
Also once the blog page is on pages, how do i make changes to it?
This my story and the page I am trying to copy.
http://www.city-data.com/forum/tennessee/359683-going-off-grid-east-tennessee.ht ml
Thanks so much
Lisa(writing) and Mike trying to get it right.

Copy and Paste the Motion

I would like to know how to Copy and Paste the Motion Parameters (i.e. scale) settings from one clip to another.

Copy your clip, select the other clip, right-click (or control-click), choose "Paste Attributes", and check "Basic Motion".

How the heck to I copy and paste keyframes (scaling, rotation, etc.) in motion 5?

Trying to figure out how to copy keyframes from one object to another obejct in Motion 5, and I'm left screaming pulling my hair out.
It USED to be so easy... where is the paste attributes option here?
Or can I duplicate the object and relink it to another object? Going crazy here. Any help would be great.

There are several ways to copy and paste keyframes:
1. Select the "source object" and go to the animated parameter in the Inspector (position for example).
2. Click and drag the parameter name you want to copy to the destination layer in the layer list via drag and drop. The values (including keyframes) will be copied to the appropriate channels.
OR
1. Select the source object.
2. For each channel that is animated (position, rotation, scale) go to the far right side of the parameter in the Inspector and select "Show in keyframe editor."
3. Select all the keyframes you want (I use a simple click and drag to create a box an select all of the keyframes) and then copy (command-c).
4. Now select the destination layer, position the playhead where you want the keyframes to start from and paste (command-v).
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/#chapter=12%26section= 12
If you just need to match the animation of another layer (Position, Rotation, Scale) try using the Match Move behavior.
http://help.apple.com/motion/mac/5.0/en/motion/usermanual/#chapter=22%26section= 7 (See the section: "To apply the transformation of a source object to a destination object")

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? thank you

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Acrobat.exe
Application Version:                           11.0.7.79
Application Timestamp:                     536b812b
Fault Module Name:                          Acrobat.dll
Fault Module Version:                        11.0.7.79
Fault Module Timestamp:                  536b80ff
Exception Code:                                  c0000005
Exception Offset:                                00cbf281
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but worked only in Mail. Lost formatting when just copied and pasted in email.

Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but PDF worked only in Mail. Word worked in nothing. I also tried copying and pasting the document but lost all formatting when just copied and pasted in email. Is there a way to do this?

Are you sure PDF won't work? It should as what you're trying to do is pretty much what it is designed for (PDF - Portable Document Format). On a Mac anywone who receives the file should be able to see it in all its page layout glory by using the app Preview or Adobe Reader. Same on a PC, the file should be viewable as a PDF file using Adobe Reader and probably some other viewer (don't use PCs so not sure what other apps).
What application are you creating the file in and are you sure you're exporting it correctly in PDF format, fonts and images embedded?

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selection. What am I do

Copying and pasting adjustments. When I copy the adjustments of an image, I thought I could then select several images and batch paste the adjustments to all selected images. But instead it's only pasting to the first photo of the selected. What am I doing wrong?

Copy and Paste develop settings in Develop mode on multiple photos on the film strip works for me, even with Auto-Sync turned off. Lr5.6 OSx 10.8.5

PSD-layered - copy and paste properties to layers in Motion?

Hi,
I imported a layered photoshop file into Motion.
I applied certain properties to one layer (with key frames, such as rotate, scale, shadow...) and I want to know if there is a way to copy those properties and paste them onto the other layers so I can then go in and do certain tweaks, without having to do each layer from scratch...
(This is something that you can do in FinalCut, copy and past attributes, but I can't seem to find that option in Motion.)
Thanks

you can do this by selecting the layers with the properties you want, then in the inspector, drag and drop the parameters onto the the layer you want them applied to.

I want to copy and paste a chart from an email into Pages on MAC. I only get the text. Not the chart.

I recieved an email that included a chart that I want to put in a document. When I copy and paste the chart in Pages it only shows the text without the chart. This shouldnt be too hard but I have no idea why it will not copy this in the format or image that it is. Thanks.

This is on OSX 10.9.3 MAC Pro
Pages version 5.2
I'm sorry I do not know how to determine the format of the chart. It was sent to me in the body of an email...it was not an attachment. Is there a way for me to find that out?
I actually tried both ways...I copied just the chart & then I copied the whole body of the email that included the chart. Either way, the chart-lines/box did not paste. Only the text.
Thanks Peter! I'm somewhat new with MAC

How can I copy and paste a pdf form onto my Mavericks Clipboard. I only see word-wrapped text.

How can I copy and paste a pdf onto my Mavericks Clipboard. I only see word-wrapped text.

Yes, Thank you for using the term Place. You moved my focus off the clipboard, and Place set me back on course. Somewhere, the terms Copy and Paste need to be tagged to Place and Export. I'm a database designer who only uses Illustrator for forms the database fills. My need isn't yet met, but the rest should come with reading the right references. Thanks Larry!

Copy and paste keyframes in motion tab

Is there a way to copy and paste a keyframe in motion or filters tab?

This video was helpful to me
http://provideocoalition.com/index.php/smartin/video/reapplyingkeyframes_inmotion/

Copy and paste motion only ?

Similar Messages

Maybe you are looking for