Copy and paste resources in resource fork?
Hi,
is there some way to have Applescript copy a resource from a resource fork in one file and paste it into another file?
Cheers!
Joe
Hello
You might try Satimage.osax, a free scripting additions made and distributed by Satimage-software, France. It includes commands to get and put resource data.
Satimage osax
http://www.satimage.fr/software/en/downloads/downloadscompanionosaxen.html
Satimage osax > resource suites dictionary
http://www.satimage.fr/software/en/dictionaries/dict_satimage.html#ResourceSuite
E.g.
--SCRIPT
Copy resource 'clut' id 128 from infile to outfile.
* Using Satimage.osax, which is to be installed in either of the following directories:
/Library/ScriptingAdditions/
~/Library/ScriptingAdditions/
set infile to "HFS:path:to:infile" as alias
set outfile to "HFS:path:to:outfile" as alias
--(1) get resource and its name from infile
set rdata to load resource 128 type "clut" from infile
set rname to get resource name 128 type "clut" from infile
--return {rname, rdata}
--(2) put resource to outfile
put resource rdata to outfile type "clut" index 128 with name rname
--(3) check
set rdata1 to load resource 128 type "clut" from outfile
set rname1 to get resource name 128 type "clut" from outfile
return {rdata = rdata1, rname = rname1}
--END OF SCRIPT
Good luck,
H
Similar Messages
-
Using Clipmate to copy and paste between projects
Thanks to Robert Johnston for the inspiration (and perspiration) for this method for copying and pasting between PE projects. One residual side effect of the method is that the audio and video of the copied clips will be unlinked. The renaming folders business is a workaround to avoid the silent audio problem after a project has been saved and reloaded.
1. Rename the folders of all audio files (including AVI files) used in the project to be copied.
2. Start PE and load in the project to be copied.
3. When asked, tell PE where the missing files are. (Check the box marked "Display Only Exact Name Matches".) Press Select.
4. Highlight parts (or all) of the project to be copied, in the timeline.
5. Copy the highlighted parts.
6. Copy into Clipmate:
6.1 Edit > Capture Special
6.2 Check both items in the list
6.3 OK
7. Close PE without saving.
8. Rename the folders of the audio files back again.
9. Open destination project in PE.
10. Re-select the copied info in Clipmate (closing the project in PE caused the clipboard to be cleared):
10.1 Select anything in the Clipmate list except the wanted item.
10.2 Select the wanted item (selecting an item loads it onto the clipboard).
11. Position the CTI to the wanted insertion point.
12. Do Edit > Paste Insert.
13. The pasted items will be highlighted in Media Panel. While still highlighted, select the Media Panel and do: Edit > Locate Media.
14. Tell PE where the files are.
15. Save project.When combining projects, it is best to do your pruning of unwanted clips and other resources BEFORE you combine them, because once the Media Panel gets heavily loaded, PE is liable to crash.
Deleting the unused resources in Media Panel is quite easy in PE3 and PE4. Simply click on the "used" column heading, and the resources will be sorted into two groups of used and unused. Just click on the resource at one end of the unused range and shift click on the resource at the other end to select the whole range, then press delete. (Note that shift works normally in this panel, unlike in the timeline!) However, it is not strictly necessary to delete unused resources before copying and pasting because only resources selected on the timeline will be copied. PE will load and save a lot quicker if unwanted resources are deleted.
My feeling is that PE4 is somewhat more unstable than PE3, but I haven't done a proper direct comparison. For some reason after a crash the autosave often doesn't seem to have done its job properly, even though I set it to save every 10 mins. So make use of the Save button Adobe gave back to us in PE4 and save often, particularly before you use the titler or fiddle with the Media Panel. -
My iMac running 10.7.5 crashes when I store a large amount of data like copy and paste a picture. It also has started being painfully slow to open the first page in Safari. Here's is some information a program gathered on my computer. -Thanks!
Problem description:
iMac 10.7.5. Crashes when copy & paste large amounts and slow to first open first web page then back to normal speed
EtreCheck version: 2.1.8 (121)
Report generated April 13, 2015 3:05:27 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Technical Specifications)
iMac - model: iMac10,1
1 3.33 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: Unknown
Video Information: ℹ️
ATI Radeon HD 4670 - VRAM: 256 MB
iMac 2560 x 1440
System Software: ℹ️
Mac OS X 10.7.5 (11G63) - Time since boot: 14 days 7:47:18
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (777.11 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Sunplus Innovation Technology. USB to Serial-ATA bridge 1 TB
disk2s1 (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 999.86 GB (143.50 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
HP Deskjet 9800
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] org.virtualbox.kext.VBoxDrv (4.2.18) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.2.18) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.2.18) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.2.18) [Click for support]
/Library/Parallels/Parallels Service.app
[loaded] com.parallels.kext.prl_hid_hook (7.0 15107.796624) [Click for support]
[loaded] com.parallels.kext.prl_hypervisor (7.0 15107.796624) [Click for support]
[loaded] com.parallels.kext.prl_netbridge (7.0 15107.796624) [Click for support]
[loaded] com.parallels.kext.prl_vnic (7.0 15107.796624) [Click for support]
/System/Library/Extensions
[loaded] com.parallels.kext.prl_usb_connect (7.0 15107.796624) [Click for support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] com.hp.devicemonitor.plist [Click for support]
[loaded] com.hp.help.tocgenerator.plist [Click for support]
[loaded] com.parallels.desktop.launch.plist [Click for support]
[loaded] com.parallels.DesktopControlAgent.plist [Click for support]
[running] com.parallels.vm.prl_pcproxy.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.hikvision.iVMS-4200.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[running] com.parallels.desktop.launchdaemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
GrowlHelperApp Application (/Users/[redacted]/Library/PreferencePanes/Growl.prefPane/Contents/Resources/Gr owlHelperApp.app)
Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
Air Mouse Server UNKNOWN (missing value)
CrossOver CD Helper UNKNOWN (missing value)
Pages UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
Wondershare Helper Compact Application (/Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.1
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 6.0 [Click for support]
Silverlight: Version: 4.0.60531.0 [Click for support]
iPhotoPhotocast: Version: 7.0
Safari Extensions: ℹ️
1-ClickWeather
Reload Button
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
Flash Player [Click for support]
Growl [Click for support]
MacFUSE [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
2% WindowServer
1% prl_disp_service
0% fontd
0% AdobeReader
0% ODSAgent
Top Processes by Memory: ℹ️
120 MB mds
112 MB AdobeReader
94 MB WindowServer
94 MB Finder
69 MB loginwindow
Virtual Memory Information: ℹ️
5.44 GB Free RAM
1.78 GB Active RAM
464 MB Inactive RAM
901 MB Wired RAM
1.64 GB Page-ins
0 B Page-outsI believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results! -
How do I copy and paste a cell AND its border?
In Excel, I can easily select a cell or a range of cells and do a copy and paste. Both the contents of the cells AND the borders copy to the new area.
I can't for the life of me figure out how to do this in Numbers. Help is useless, either in the COPY or the BORDERS area.Question already asked and answered several time.
Numbers is not an Excel clone.
It behave its own way.
The efficient resource is not the Help but the User Guide.
Yvan KOENIG (VALLAURIS, France) vendredi 12 août 2011 09:31:12
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
Having problems copying and pasting in Photoshop CS5
Hi,
I'm running Photoshop CS5 on my laptop (Win 7) and desktop (Win 8).
When I have three documents open and open a New one, I can't get the others to copy and paste by keys or menus...not even by dragging to the new document.
Same thing happens in both version of Windows. The images are all jpgs, RGB, 8 bit.
Also, sometimes when I create a New doc, one of the other images suddenly disappear.
Any ideas what's going on here?
Thanks in advance for any advice you can offer.
BiffYou probably simply crash your graphics acceleration by exhausting all resources. Turn off openGL in the prefs and/or update your graphics driver.
Mylenium -
Dreamweaver copy and paste not working
Hi
The copy and paste functions on my Dreamweaver have stopped
working.
The copy and paste functions are greyed out in the edit drop
down in both code and design views. Ctr C and V are also not
working.
Tried various fixes including moving the config folder and
reinstalling but nothing has worked.
Any suggestions?
Thanks
DirkYou can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dirkwalker" <[email protected]> wrote in
message
news:ebhgfi$8qj$[email protected]..
> Hi
>
> The copy and paste functions on my Dreamweaver have
stopped working.
>
> The copy and paste functions are greyed out in the edit
drop down in both
> code
> and design views. Ctr C and V are also not working.
>
> Tried various fixes including moving the config folder
and reinstalling
> but
> nothing has worked.
>
> Any suggestions?
>
> Thanks
>
> Dirk
> -
Copy and paste cell content of web form of Hyperion Planning
Our end users encountered performance issues in using the web forms of Hyperion Planning. We have some large web form with 60 columns and 100 rows i.e. around 6000 cells. When end user move around the cell they feel a slow response in the web form especially when copy and paste some cell content from one row to another, or a few cells from one position to other position.
Anyone got similar experience in using web form? Also we understand that Hyperion design will check the cell content of each cell and generate a SQL query to the backend metadata database. It is quite time consuming and waste CPU resource because most of the time our end user will not keep the text information under each cell. We have consulted Oracle team and understand that we cannot disable the cell content checking via SQL query.
Any workaround solution exists to reduce or remove the performance issue in cell content copy and paste?
Thanks!Hyperion user wrote:
Alp Burak wrote:
Hi,
We had faced the same issue a few years ago. One of our geeks had done a change in either Enterdata.js or Enterdata.jsp which disabled form cell validation. I don't currently have the code with me but it wasn't a big change really, remarking a function could be doing the trick.
I don't think this is officially recommended by Oracle though.
AlpThanks for your advice. We will try to locate the enterdata.jsp and enterdata.js and found out where the SQL being executed.We found out the Enterdata.js under the deployment directory of Weblogic. However it is over 400KB size and many many lines of codes. We think that it is very difficult to locate where should be customized to remove the SQL checking on cell content.
\\Hqsws04\hyperion\deployments\WebLogic9\servers\HyperionPlanning\webapps\HyperionPlanning -
Copy and paste problems in iCal.
I am unable to copy and paste from my clipboard into either the title block or in the notes section of an event.
You can try this simple fix -
Quit DW.
Find this file -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"linzeloo" <[email protected]> wrote in
message
news:e1le9o$jp8$[email protected]..
>I have dreamweaver open with the page open and the local
site open to the
> right. It doesn't matter which page I use - the same
thing happens. It
> doens't paste my copied text, instead it creates a
copied page in the
> local
> site folder. I've tried using my shortcut keys - ctrl
and c, then ctrl
> and v,
> and I've also tried using the 'edit' 'copy' from the top
toolbar and the
> same
> thing happens.
> -
Copy and paste (aka cloning)
Here's my scenario
IDM: ABC
AD: ABC
Notes: [email protected]
This user account changed the accountId so I want to disable the ABC account and clone it and all of its resources. I need to clone IDM, AD and Notes and only change the accountId. Everything else will stay the same. The end result will have 2 accounts in IDM as below
IDM: ABC (*DISABLED*)
AD: ABC
Notes: [email protected]
IDM: 123
AD: 123
Notes: [email protected]
Is there a copy and paste kind of functionality to do this within IDM? I need to do this in a WF for ActiveSync.
ThanksHi,
Meanwhile, I suggest you check whether you have any third party anti-virus programs installed in your system, some of those software might prevent such copy\paste function, if you have, please temporarily turn off or uninstall them as a test.
Or as
raghuramu mentioned, it is a software restriction in some websites.
By the way, are you able to copy and paste between other application, such as word to word, not IE?
Yolanda Zhu
TechNet Community Support -
Premiere Pro CC(2014) crashing when copying and pasting clips
Has anyone found Premiere to hang when copy and pasting clips from one sequence to another, or even within the same sequence.
Sometimes, it hangs then comes back to life. Other time I just have to force quit.
ThanksI don't recall reports of such a problem. We'll need more info to attempt to troubleshoot the issue. Start with the prompts on this page: FAQ: What information should I provide when asking a question on this forum? Especially the details on your computer.
Also, please report the following:
the types of content in your sequence, particularly in segments you're pasting. The source(s) of the content, the codec(s), the duration of copied segments?
where the content is stored?
whether either sequence was imported from a third-party program via XML or the like?
the sequence settings of both sequences?
what effects & transitions are in use, particularly in the segments you're pasting?
what is resource usage before and during the copy/paste operation? Is a CPU getting pegged? Does memory usage spike precipitously? -
Copy and paste multiple ap divs
I'm selecting multiple ap divs, copying, and attempting to
paste to another page. Only the last div in the succession of
selections is pasting, ie, index page - select div1, div2,
div3...div10, copy, paste to nextpage.html. Only div 10 appears.
Thanks for the assistance....
David BirdThat is mother nature's way to suggest that you not use so
many AP Divs.
I'm afraid it's all you get. What is it you are trying to
accomplish?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"lusciousleprechaun" <[email protected]>
wrote in message
news:fqhs5h$pru$[email protected]..
>
>
> Hi there,
>
> Can anyone tell me how to copy and paste multiple AP
Divs? When I select
> the
> AP Divs and do Control C and Control V only the last
selected AP Div is
> copied
> over. This is driving me to drink!
> Any help would be greated appreciated!
>
> -
Need help for trying to unfreeze a message on my ical. I was trying to copy and paste some appointment info from one day to another on my ical and a message popped up saying the system responded with an error. All of my info was below the message. I can't get that message to go away or work on the ical now at all. I try to force quit ical and have shut down the computer and it still comes up. Any suggestions?
K,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, if you are using Lion, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop, and log out/in or restart.
Next, make sure that you are not connected to the internet. Then to to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as listed above to get to the correct Library Folder. Log out/in, or restart and check iCal for functionality. -
Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated. -
HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbovAJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window. -
I have a document that in Word required a password to open. I copied and pasted it to Pages. Put the password protection on. Now if I click on that filename in Finder it automatically opens.Why. Anyone can read it. How do i protect it again?
You saved it after setting the Password? :
Inspector > Document > Document > Require Password to Open
I just tested it and it shows up ijn The Finder with a padlock on the file icon and does require a password to open.
Peter -
Cannot copy and paste descriptions in PDF Portfolio
I am using Adobe Acrobat Pro 9.5.1 on a Windows 7 laptop. Since a recent update I am unable to copy the description in a PDF Portfolio and paste it back. I used to be able to copy the description; delete the file; add an updated file and then paste the description back. Now I have to re-type the description. I cannot event copy and paste a description from another PDF portfolio. Can you advise why this is so and is there a workaround?
Adobe does not report the progress of bug reports to the public, nor can I comment on the timescale for any future updates or what they may contain. Priority is of course given to the current Acrobat X Family and recently-announced Acrobat XI Family.
Copy/paste between all the file details fields in PDF Portfolios is fully functional in Acrobat X Pro (which currently has a captive install of Flash Player) and in Acrobat XI Pro (which does not). I don't have an install of 9.5.1 to test your bug report against, but whatever is causing the issue in your case it's not an intentional change.
Maybe you are looking for
-
Regarding reading multiple records into a single internal table..
hi experts, Need your help, i have a requirement like this. i will have a input file like this D 123 Suresh 12/01/2008 E ven sha 5432 E ven sha 5432 D 153 Sachin 11/01/2008 E ven sha 5432 Now all i need to consider
-
How can I convert a screenplay document into a multicolumn script?
Is there a way to import an existing script into the multicolumn format?
-
How to add text to a polygon shape?
I created a triangle: <Polygon Name="triangle_top" Points="0,0 130,0, 130,130" Stroke="Black" /> I would like to add text to it without adding a label. how should I do it?
-
Where is the Quicklook preview when saving a file as Photoshop EPS in CC2014
When I save a photoshop image as a PHOTOSHOP EPS it does not add a preview in the file. In CS6 it worked fine. Now the Quicklook preview (in the finder) is gone it makes it very hard to see what you are importing in for example Indesign. The reason w
-
Creating new report 1st day of each month
Hello, all! I have a vi that I run to record pressure on test units. I want to create a new excel report on the 1st day of each month. If it is not the 1st day of the month I want to just add the data for each test unit as a new worksheet. I have