Copy batch in stock transfer order to receiving batch

Hi experts,
I would like to know how to copy batch number in stock transfer order to the receiving batch in material document which generated when post goods issue. Is there any user exits I can carry out? Many thanks in advance.

Dear,
Kindly enter batch in STO after storage Location column in every line which you enter in STO. then you can create delivery batch no automatically comes in delivery. There are no require to split batch in delivery.
Hope it will help you.
Regards,
Sandip

Similar Messages

Routing in Stock Transfer Order

Hi,
We are having SAP 4.7 & we have activated Transportation Routing process.
Routing is copied in Sales order & Delivery. But the same is not copied in the stock transfer Order. We are doing following steps.
We are using Stock Transfer order to transfer the material from One storage location to another storage location. Supplying Plant & Receiving Plant are same in Stock transfer Order. We are entering Receiving STorage location & Shipping point in the STO.
Is this b'coz of Supplying plant & receing plant are same in the STO ? Or i need to active something els for this.
Kindly revert back.
Thanks in advance.
Samir Bhatt

Hi,
this is one of the problems caused by an organisation structure that is not quite matching the "real world".
In SAP each Plant should have a unique address and the storage locations are thought of as areas within that address.
If you have two sites that have different addresses, they should <u>ideally</u> be separate plants. You can then use all of the available functionality within SAP that you would expect.
If you want to set up a route that goes from one address to another than this is possible, but in your case you are actually saying that you want a route for s delivery from and too the same address, not really a real world scenario.
So if you really want to do this then each site should be a plant. I expect that it is too late to change your design but it is important for others reading this to understand the problems that are caused when Storage locations are used instead of Plants for physically separate addresses.
Sorry if this is not much help to you but it should help you to understand why you are having a problem.
Steve B

Open Qty is not copied in Delivery for Stock Transfer Order

Hi,
In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
Regards
Vijay

Dear Friend,
If I can understand you clearly.
to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
In the Item requirement : Generally it is 202
reward points if helpful,
regards,
Amlan

Cenvat CLEARING account in Stock transfer order

Hi
Please tell way to clear Cenavt CLEARING account in intra company stock transfer order(Within same company code).We will not post any MIRO against the STO.
Thanx
Mani

Hi,
1. Create a Subtransaction type for STO in the receiving plant.
2. Copy the GRPO excise transaction type and change the clearing account
3. suggest the user to enter the sub transaction type manually during excise invoice capturing (when the material is received from the other plant only).
4. If you need some validations to avoid user entry mistakes, please take the help of ABAPer and incorporate some validations while capturing excise Invoice like checking whether the PO referred is Intra company or normal. etc...
For manual clearing, approach your fellow FICO consultant.
Regards,
Girish

Stock transfer orders

Hi Experts,
Can i know what is stock tranfer order?
how to create stock transfer oreders.

Dear Raghavendra,
Whenever you need to transfer the materials from one plant to another plant belonging to one company or belonging to two company code stock transfer order is raised by the delivering company.
STO:
Transfer of goods from one location to another location,it may be between plants within the same company code or in different company code's plants.
within the company code, bet plants, receiving plant will raise the STO in Supplying/issuing plant-ME21n,
Supplying plant will deliver the goods to receiving plants , then we need to pick n post the Goods Issue-VL02n, nw when we can observe that the STO qty will be added into receiving plant and reduced in Delievering plant.
To do this, we need do prior customizatin in SPRO-IMG,-material should be created in both plants( receiving & Supplying)
-maintaing the stock only in supplying plant
-create a dummy customer in supplying plant's sales area(if u have one sales area, create in tat comp code n sales area)
-Assign this customer number to receiving plant's details along with the sales area,
-Assign the STO doc type(UB) to Supplying plant, along with checking rule
-Assign the Del type (NL/NLCC) to Supplying n receiving plant.
You create a STO from MM route i.e., ME21N and then enter the details of the supplying,receiving plant and the materials.Once you complete the STO,then it goes for a delivery followed by an intercompany invoice.
Remember that the Material should be there in BOTH supplying and receving plant.
Internal Procurement (Stock Transfer With Delivery):
In a company, goods movements do not only occur in the form of goods receipts and goods issues. Depending on the organization of the company (for example, decentralized storage) and its sales policy, internal stock transfers might also be necessary.
The stock transfer with delivery is a plant to plant scenario. You are posting a goods issue in plant BP02 and a goods receipt in plant BP01.
This type of stock transfer can only be carried out from unrestricted-use stock of the issuing plant to unrestricted-use stock of the receiving plant.
You post the placement into storage at the receiving plant in a second step. Only then is the event completed and the transferred quantity part of unrestricted-use stock.
Functions:
Creating a Planned Independent Requirement
Creating a stock transport order in plant BP01
Generating a delivery in plant BP02
Picking of the material and posting the goods issue in the delivering plant
Posting the goods receipt in the receiving plant
Note: The quantity posted from stock is first of all managed as stock in transit of the receiving plant. Only once the goods receipt has been posted is the quantity posted to the unrestricted-use stock of the receiving plant. This enables the quantity "on the road" to be monitored.
The transfer posting is valuated at the valuation price of the material in the issuing plant.
Delivery costs can be entered in the stock transport order.
Internal Procurement (Stock Transfer without Delivery):
The cross-plant, internal procurement of materials can be carried out within one company code (intercompany) or by using several company codes (cross company). This process can be dealt with using standard functions such as material requirements planning, purchase requisition, stock transport order, transportation planning and the handling of internal deliveries.
The following functions are provided to support the Internal Stock Transfer without Delivery:
Create Stock Transport Order
Post goods issue for stock transport order
Post goods receipt for stock transport order
Note: Quantity "on the road" can be monitored
Delivery costs can be entered in the stock transport order
Internal Procurement (Cross-Company Stock Transfer):
You post a stock transfer from company code to company code the same way as you post a stock transfer from plant to plant, except that both plants belong to different company codes.
During the stock transfer, two accounting documents are created in addition to the material document:
-An accounting document for the removal from storage at the issuing company code
-An accounting document for the placement into storage at the receiving company code
The stock posting is offset against a company code clearing account.
To display the value of the cross-company-code stock in transit with a report, choose Environment à Stock à Stock in transit Cc.
The following functions are provided to support the cross company stock transfer:
Create sales order to customer
Run single-level MRP
Creating a purchase order
Creating delivery
Picking and post goods issue
Posting goods receipt
Create inter-company billing document
Invoice receipt
Create delivery, picking and post goods issue to customer
Billing
Notes: The issuing plant enters a delivery for the stock transport order and a billing document. This is an inter-company billing document (billing type YBIV). Pricing takes place as normal.
When the goods arrive, the receiving plant posts a goods receipt for the purchase order. The unrestricted-use stock increases and an accounting document is created.
The invoice is checked with reference to the purchase order.
Stock transport order processing in receiving plant
Delivery processing in supplying plant Picking batch determination in delivery Goods issue processing in the supplying plant Billing processing in supplying plant
Goods receipt processing in receiving plant Invoice verification processing in receiving plant Purchase order monitor processing in receiving plant
Stock Transport Order:
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b911d43ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b918543ad11d189410000e829fbbd/content.htm
Regards,
Naveen.

Capture Excise Invoice w.r.t Stock Transfer Order

Hi all,
Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
right Now i'm follwing below Steps
1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
2. Issue Material to Receiving PLant using 351 Movement.
3. Book the CVD Condition thru MIRO Transaction
4. Capturing Excise Invoice w.r.t Stock Transfer Order.
5. Receive the material in Plant( 101 Mvmt).
I had Few Query at step 3 and 4.
Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
does that mean i have to first create the excise invoice in sending plant?
if yes, how can i create pls provide step for this.
this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
Regards,
Sheo Anand Singh

Hi Anand,
Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
Hope this clarifies.
Thanks,
Viswanath

Intercompany Stock transfer order with excise

Hi,
Can anyone tell me about Intercompany Stock transfer order with excise step by step.
hoping to replu

Hello,
Create Stock Transport Order - ME21N
Create Delivery Challan (DC) - VL10B (this reduces the inventory from supplying plant)
Create Excise Invoice refering the DC created above - J1IS - Ref document type OTHR (Excise values are transfered in this step)
Do goods receipt against the DC (outbound delivery) - MIGO in receiving plant. Also capture and post the excise invoice cerated in J1IS.
Regards
Mahesh Naik

RE: Intercompany stock transfer order process

hi SD Experts,
I really appreciate if anyone explain me how to execute Intercompany stock transfer order with intercompany billing scenario.
I used T-Code ME27, but unable to do delv and intercompany billing
thanks in advance
regards
vaseem

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Stock transfer order between 2 plants in same company code

Dear All,
We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
Thanks & Regards
Nitin Chhabra

Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense. The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
Rgds
Richard

STO Stock Transfer Order with HU (Handling Units) - Error Hugeneral 319

Hello,
We implemented a Stock Transfer Order process with the following details:
MM side
- PO is type NB, supplier is F_8001;
- In table T001W, supplier F_8001 is assigned to plant 80GP;
- WERKS = 40TV and LGORT = 41P in all PO items;
- In each item, the shipping tab is filled with NLCC as delivery type and customer C_4000 (this customer corresponds to plant 40TV in table T001W). The sales area is also defined as the sales area to be used in the sales order that will be created in plant 80GP;
SD side
- Sales order is created automatically for customer C_4000;
- In plant 80GP we have a HU managed stloc (32P). In this stloc we have a HU with the exact contents of the sales order. This HU has X in the HU storage loc field;
- We created the outbound delivery and chose our HU. From this moment the HU storage loc field changed to D and the HU was assigned to the delivery;
Now for the problem:
When we click Post Goods Issue button, we get the following error for each item:
HUGENERAL 319 - HU item contains different data than the stock posting
The HU contents are exactly what we need to ship, so we do not understand this error. We need this HU to be transfered to stloc 41P in plant 40TV (this stloc is also HU managed). Any clues?
Thanks in advance,
Joã

Hi,
Have you checked your HU material and material to packed both having stock in Inventory.
Even check the table HUMSEG is correctly updated or not.
check this table correctly Hu assignd to you material and created materil document or not.
check for for material master clearly for both material like plant, storage location, batch etc..
Ask your MM consultant to check all entry is correct in material master and delivery or not.
Regards
Karthik.

Stock Transfer Order two step process

Hi!
we are following stock transfer order in two step process along with WM
we are using movement types 641 & 101.
Now our client rerquiement is : when goods issue is posting in supply plant ( movement type 641), the accounting entry should be Goods in Transit A/C dr TO Stock Account Cr.
when goods receipt is posting in receiving plant the accounting entry should be : Stock Account a/c dr to Goods in Transit A/C, if there are price differences it will be posted to price difference accounts ( both have price control "S").
how can we acheive this.
Now only at the time of 641 or 101 we posting the accounting document as: Stock A/C dr ( receiving plant) to Stock A/C Cr ( issuing plant) and price difference.
regs,
ramesh

we can a report in MB5T, but there you cannot find value of the stock, only quantity of stock, as in STO, there will not be any price, that is the problem.
regs,
ramesh

Good Receipt with reference to delivery or stock transfer order

We have a stock transfer order between two plant. Requirement is as under.
Steps - Supplying plant is creating stock transfer order, doing delivery with reference to STO by VL10B.
Receiving plant is doing Good Reference with reference to delivery or STO t code MIGO.
Now the requirement is if A Plant is supplying 100 nos, at the receiving plant it should not allow less then 100 nos. it should give error that qty is not match with delivering qty.
Thanks in advance
Samir Bhatt

HI,
You mean to say that STO quantity must be equal to GR quantity or else system should throw an error
After STO and delivery PGI is done.
Then GR is made with refernce to STO.
Regards
KK

Transaction to see the Open stock transfer order for the plant

HI ,
i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
I need how to cretae the stock transfer order for the material , whci material master is required for this process.
please give me step by step details for this .
regards
satish
Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

Hi Satish,
You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
Steps for Intra company stock transfer:
This is only within the comp.code(w/o SD)
(w/o SD) 351101 MvT. and (with SD) 641101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
(1 by1 )
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(don't fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
Position doc type is "UB"
Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
6.Assign doc. Type is "UB" to u'r plants.(PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
11. See the stock overview in the receiving & supplying plants.
Steps for Inter company Transfer:
1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receiving Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
Regards,
Prasath

Stock transfer order excise

Dear Experts,
Can i know wt are the special things comes in stock transfer order excise compare to domestic excise process?
i know abt domestic excise invoice process.. pls let me knoe the process of stock transfer order-for excise --
Regards
ishikesh

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Stock transfer order process

Hi Experts,
can anybody provide me the Configuration and Easy Access steps to be taken to set up the stock transfer order? Please help me as I need to configure this at the customer site.
Thanks in Advance.

hi
Material should exist in both the plants (Delivering & Ordering),
Internal customer should be assaigned to the ordering plant ( MM -> Purchasing -> Purchase Order -> Setup stock transport order -> assign the internal customer to the ordering plant and assign the Sales area of the internal customer.
Assign its Sales area to the delivering plant
Assign the document type and Delivery type NB and NLCC
Assign the Supplying plant --> Receiving Plant --> NB
Take the delivering plant and assign the sales area.
Vendor master has to be created and assaign the supply source ( Delivering Plant).
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
rewards point it helps

Copy batch in stock transfer order to receiving batch

Similar Messages

Maybe you are looking for